TTE Technology RC650D 2.4GHz Remote Receiver Dongle User Manual RC650 and RC650D Install instruction Part2 REV2

TTE Technology, Inc. 2.4GHz Remote Receiver Dongle RC650 and RC650D Install instruction Part2 REV2

Contents

RC650 User Manual and RC650D Install instruction_Part2-REV2

Download: TTE Technology RC650D 2.4GHz Remote Receiver Dongle User Manual RC650  and RC650D Install instruction Part2 REV2
Mirror Download [FCC.gov]TTE Technology RC650D 2.4GHz Remote Receiver Dongle User Manual RC650  and RC650D Install instruction Part2 REV2
Document ID2124440
Application IDkOCoSmd/lfjE7HpC7Jbxfg==
Document DescriptionRC650 User Manual and RC650D Install instruction_Part2-REV2
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize411.59kB (5144885 bits)
Date Submitted2013-11-21 00:00:00
Date Available2013-11-22 00:00:00
Creation Date2013-11-14 17:18:14
Producing SoftwaredoPDF Ver 7.3 Build 387 (Windows 7 Ultimate Edition (SP 1) - Version: 6.1.7601 (x86))
Document Lastmod2013-11-15 13:44:05
Document TitleRC650 User Manual and RC650D Install instruction_Part2-REV2

RC650 User Manual:
Open the battery cover,install three AAA batteries,and then you can operation
the remote control freely. The digital button 0~9 are channel shortcut keys. And other
keys are corresponding function keys.But it is important to note that mouse and voice
key are only RF radio button.
Remote Control Paring:
Press volume+ and volume- 2 seconds at the same time,the remote control will
access paring and the “information window” will shine green with 2HZ 50% duty
cycle. After paring success,the green light blink several times with 8HZ 50% duty
cycle and bright 1 second before extinguished. If it continued paring 20 seconds and
unsuccessed,green light will go out and exit paring.
RC650D Install instruction:
Fix the dongle and antenna to the specific position,just as the below picture,connect
the antenna to the dongle antenna interface,and connect the dongle to the motherboard
interface through USB interface.And by the USB interface, motherboard give 5V DC
to the dongle .
The end product must carry a label stating "Contains FCC ID:W8URC650D" .
FCC information:
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Mode                       : UseNone
XMP Toolkit                     : 3.1-701
Create Date                     : 2013:11:14 17:18:14+08:00
Modify Date                     : 2013:11:15 13:44:05+08:00
Metadata Date                   : 2013:11:15 13:44:05+08:00
Producer                        : doPDF Ver 7.3 Build 387 (Windows 7 Ultimate Edition (SP 1) - Version: 6.1.7601 (x86))
Format                          : application/pdf
Document ID                     : uuid:5af75b46-ccb2-45bb-80a2-193f93a2ffc7
Instance ID                     : uuid:fe99fe5a-40b5-4528-8c22-834890995e19
Page Count                      : 2
Page Layout                     : OneColumn
EXIF Metadata provided by EXIF.tools
FCC ID Filing: W8URC650D

Navigation menu