Tagsys CONVYRANT Conveyor Antenna User Manual ConveyAntInstall270

Tagsys S.A. Conveyor Antenna ConveyAntInstall270

Contents

Installation Guide

Conveyor Antenna for 270 TL
Installation Guide
Revision 1.0
TAGSYS
April 2004
Conveyor Antenna for 270 TL Installation Guide
2/26 Revision 1.0 September 20034
Publishing Information
Disclaimer and Limitation of Liability
All information herein is either public information or is the property of and owned solely by TAGSYS who shall have and
keep the sole right to file patent applications or any other kind of intellectual property protection in connection with such
information.
Nothing herein shall be construed as implying or granting to you any rights, by license, grant or otherwise, under any
intellectual and/or industrial property rights of or concerning any of TAGSYS’ information.
This document can be used for informational, non-commercial, internal and personal use only provided that:
§ the copyright notice below, the confidentiality and proprietary legend and this full warning notice appear in all copies.
§ this document shall not be posted on any network computer or broadcast in any media and no modification of any
part of this document shall be made.
Use for any other purpose is expressly prohibited and may result in severe civil and criminal liabilities.
The information contained in this document is provided “AS IS” without any warranty of any kind. Unless otherwise
expressly agreed in writing, TAGSYS makes no warranty as to the value or accuracy of information contained herein.
The document could include technical inaccuracies or typographical errors. Changes are periodically added to the
information herein. Furthermore, TAGSYS reserves the right to make any change or improvement in the specifications
data, information, and the like described herein, at any time.
Therefore TAGSYS assumes no liability and is not responsible for customer applications or product or software that
include TAGSYS products.
TAGSYS HEREBY DISCLAIMS ALL WARRANTIES AND CONDITIONS WITH REGARD TO THE INFORMATION
CONTAINED HEREIN, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT. IN NO EVENT SHALL TAGSYS BE LIABLE, WHETHER
IN CONTRACT, TORT OR OTHERWISE, FOR ANY INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES OR ANY
DAMAGES WHATSOEVER INCLUDING BUT NOT LIMITED TO DAMAGES RESULTING FROM LOSS OF USE,
DATA, PROFITS, REVENUES, OR CUSTOMERS, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
PERFORMANCE OF INFORMATION CONTAINED IN THIS DOCUMENT.
TAGSYS does not and shall not warrant that this product/system/equipment will be resistant to all possible attacks, and
shall not incur, and disclaims, any liability in this respect. Even if each product is compliant with current security
standards in force on the date of their design, security mechanisms' resistance necessarily evolves according to the
state-of-the-art in security and notably under the emergence of new attacks. Under no circumstances shall TAGSYS be
held liable for any third party actions, and in particular in case of any successful attack against systems or equipment
incorporating TAGSYS products.
TAGSYS disclaims any liability with respect to security for direct, indirect, incidental or consequential damages that result
from any use of its products. It is further stressed that independent testing and verification by the person using the
product is particularly encouraged, especially in any application in which defective, incorrect, or insecure functioning
could result in damage to persons or property, denial of service, or loss of privacy.
© 2000-2004 TAGSYS. All rights reserved.
Microsoft, Visual C++, Windows, and Windows NT are either registered trademarks or trademarks of Microsoft
Corporation in the U.S.A. and/or other countries.
Printed in France.
TAGSYS – 180 Chemin de St Lambert, 13821 LA PENNE SUR HUVEAUNE, France.
Tel: +33 (0)4.91.27.57.00 / Fax: +33 (0)4.91.27.57.01
Document Reference: 10926A1
Read This First
April 2004 Revision 1.0 3/26
Read This First
Welcome to the TAGSYS RFID System. This Installation Guide is designed to help you get up and
running quickly using this high-quality Radio Frequency Identification (RFID) system. It describes
all you need to know about how to install and use the TAGSYS system and its associated
applications.
It provides a step-by-step guide for the following procedures:
§ Installation of the Conveyor Antenna
§ Configuring the product for use within your library system
§ Using the product with your computer system
This guide is designed for all TAGSYS partners and for TAGSYS Expert Network customers
implementing a low-cost and high-performance RFID solution.
This document does not assume any previous knowledge of Radio Frequency Identification (RFID)
technology.
Conventions
Symbol Meaning
CAUTION: A note that advises users that a specific action could result in the loss of data or
damage the hardware.
WARNING: A note that advises users that a specific action may result in physical harm.
A note that provides additional information that helps the user perform a task or obtain the
best performance from the product.
Abbreviations and Acronyms
AFI Application Family Identifier
AON All Or None
API Application Programming Interface
RF Radio Frequency
Glossary
Anti-Collision Tag capability making it readable while other tags are present in the RF field.
Antenna An aerial that receives and/or transmits radio frequency signals. Aerials are
manufactured in a variety of forms, shapes and sizes.
BNC Connector Cylindrical metal connector with a copper core that is located at the tip of a
coaxial cable, and is used to connect cables together. It attaches by pushing and twisting the outer
cylinder on to two locking pins.
Coupler See Reader.
Conveyor Antenna for 270 TL Installation Guide
4/26 Revision 1.0 September 20034
IEC Connector Three-pin connector used on sockets that carry mains electricity to the computer.
All PCs use a male IEC connector and mains lead with a female IEC connector.
Multi-Read See Anti-Collision
Packaged Reader A reader in its casing.
Phase Shift Difference of phase between the 13.56 MHz field emitted by two antennas. This
feature is dedicated to rotating field applications and three-dimensional volume smart label
detection.
Protocol A set of rules governing a particular function, such as the flow of data/information in a
communication system (communication between a smart label and a reader or a reader and a PC
or host computer).
Radio Frequency Identification System (RFID) An automatic identification and data capture
system comprising one or more readers and one or more smart labels in which data transfer is
achieved by means of suitable modulated inductive or radiating electromagnetic carriers.
Reader Electronic system for the communication between smart labels and host computers.
Reader Talks First Chip protocol for exchanges between the reader and the chip, whereby the
chip waits for a command from the reader to which it responds.
RS-232 Electronic Industries Association (EIA) standard for serial interfaces between computers
and peripherals that defines the function, the electrical characteristics and the timing of signals.
RS-485 Electronic Industries Association (EIA) standard for multipoint, differential data
transmission. It allows multiple nodes to communicate bi-directionally over 1 or 2 twisted pairs.
Smart Label Small, flexible tag from the 13.56 MHz TAGSYS product line. A smart label is made
of a chip connected to an etched antenna.
Tag See Smart Label.
Tag Talks First Chip protocol for exchanges between the reader and the chip, whereby the tag
sends information continuously, without waiting for a specific command from the reader.
Transceiver A combined transmitter and receiver.
Transponder A combined receiver/transmitter that automatically transmits a signal when a ‘trigger’
is received by it. The trigger is often a pulse, called an interrogation pulse.
Read This First
April 2004 Revision 1.0 5/26
If you need assistance
Please contact your nearest TAGSYS sales representative or the TAGSYS welcome desk at:
Telephone: +33 (0) 4 91 27 57 00
Fax: +33 (0) 4 91 27 57 01
E-Mail: info@tagsys.net
Contact for Comments
We welcome your feedback to help us provide high quality documentation.
For technical comments, please contact our welcome desk:
Telephone: +33 (0) 4 91 27 57 00
Fax: +33 (0) 4 91 27 57 01
E-Mail: info@tagsys.net
Please remember to quote the Document Reference Number 10926A1, your job title and your
company.
Quality Issues
TAGSYS implements stringent quality controls at all stages of its manufacturing process. However,
should you find a defect with this product, please notify your TagSys Quality Service representative
using the dedicated Product Return Form.
Telephone: +33 (0) 4 91 27 57 36
Fax: +33 (0) 4 91 27 57 02
Conveyor Antenna for 270 TL Installation Guide
6/26 Revision 1.0 September 20034
Table of Contents
Publishing Information 2
Disclaimer and Limitation of Liability 2
Read This First 3
Conventions 3
Abbreviations and Acronyms 3
Glossary 3
If you need assistance 5
Contact for Comments 5
Quality Issues 5
1For Your Safety 7
1.1 General Use 7
1.2 Care and Maintenance 7
1.3 Important Safety Information 8
1.3.1 Operating Environment 8
1.3.2 Medical Devices 8
2Certification 9
2.1 Occupational Health and Safety Notices 9
2.2 Regulatory Notices 9
2.2.1 In Europe (CE and RTTE Directives) 9
2.2.2 In USA (FCC Directive) 10
2.2.3 In Canada 11
3Overview 12
3.1 Delivery Kit 12
4Installation 14
4.1 Antenna Location 14
4.2 Antennas Active Area 15
4.3 Installing the Conveyor Antenna 16
4.3.1 Guides 17
4.4 Installing the TR-L100 Reader Unit 18
4.5 Installing the Signal/Buzzer Box 18
4.6 Cabling Requirements 19
4.7 Installation Test 19
5Maintenance 20
5.1 Servicing the Conveyor Antenna 20
5.2 Servicing the Reader Unit 20
5.3 Servicing the Signal Box 20
6Technical Data 21
6.1 Mechanical Characteristics 21
6.2 Electrical Characteristics 22
7Warranty Conditions 23
7.1 Warranty 23
7.1.1 Warranty Exclusions 23
7.1.2 General Provisions 24
7.1.3 How to Return Defective Products 24
For Your Safety
April 2004 Revision 1.0 7/26
1 For Your Safety
1.1 General Use
The Conveyor Antenna is designed to be rugged and reliable and to provide years of trouble-free
service. Please observe the following general tips:
§ Take care not to scratch the device. Keep the device clean. When working with the device,
use only TAGSYS-approved accessories.
§ This device is not waterproof and should not be exposed to rain or moisture. Under extreme
conditions, water may enter the circuitry.
§ Take care not to drop the device or subject it to any strong impact.
§ Protect the device from extreme temperatures. For example, keep it away from heaters and
other heat sources.
§ Do not store or use the device in any location that is extremely dusty, damp, or wet.
§ Use a soft, damp cloth to clean the device. If the surface of the device becomes soiled,
clean it with a soft cloth moistened with a diluted window-cleaning solution.
1.2 Care and Maintenance
This device is a product of superior design and should be handled with care. The suggestions
below will further increase the lifetime of this device.
§ Keep the device and all parts and accessories out of the reach of small children.
§ Keep the device dry. Precipitation, humidity and liquids contain minerals that will corrode
electronic circuits.
§ Do not use or store the device in dusty, dirty areas. Its moving parts can be damaged.
§ Do not store in hot areas. High temperatures can shorten the life of electronic devices and
warp or melt certain plastics.
§ Do not store in cold areas. When the device warms up (to its normal temperature), moisture
can form inside the device, which may damage electronic circuit boards.
§ Do not attempt to open the device. Non-professional handling of the device may damage it.
§ Handle the device with care. Shocks may break internal circuit boards.
§ Do not clean the device with harsh chemicals, cleaning solvents or strong detergents.
Gently wipe the device with a soft cloth slightly dampened in a mild soap-and-water
solution.
§ Do not paint the device. Paint may clog the device’s moving parts and prevent proper
operation.
Conveyor Antenna for 270 TL Installation Guide
8/26 Revision 1.0 September 20034
1.3 Important Safety Information
1.3.1 Operating Environment
Follow all special regulations that are applicable in any area and always switch off the device
whenever its use is prohibited, or when it may cause interference or danger.
When connecting the device or any accessory to another device, read its user’s guide for detailed
safety instructions. Do not connect incompatible products.
As with all RF equipment, users are advised that the equipment should only be used in its normal
operating position.
1.3.2 Medical Devices
Most modern electronic equipment is shielded from radio-frequency (RF) signals. However, other
electronic equipment may not be shielded against the RF signals from your device.
Operation of radio transmitting equipment, including cellular mobile phones, may interfere with the
functionality of inadequately protected medical devices. Consult a physician or the manufacturer of
the medical device to determine if they are adequately shielded from external RF energy or if you
have any questions.
Certification
April 2004 Revision 1.0 9/26
2 Certification
2.1 Occupational Health and Safety Notices
TAGSYS Products have been designed not to exceed the limits given in the European Standard
EN 50364 “Limitation of human exposure to electromagnetic fields from devices used in Electronic
Article Surveillance (EAS), Radio Frequency Identification (RFID) and similar applications” in
conjunction with the European Standard EN 50357 describing how to evaluate the exposure level.
It is the responsibility of the TAGSYS Partner to install the Conveyor Antenna as described in
TAGSYS Product Manuals or TAGSYS Documentation and with the appropriate antennas.
Modification of any TAGSYS System is prohibited without the written consent of TAGSYS.
Unauthorized modifications may void the conformity of the equipment to safety norm and will void
the TAGSYS warranty.
An RF fields survey has been carried out on all the System components, in accordance with
AS/NZS 2771.1: Radio Frequency Radiation, Part 1. According to this standard the maximum
allowable RF exposure levels (non-occupational) at 3 kHz to 300 GHz are 200 µW/cm2.
2.2 Regulatory Notices
An RFID system typically composed of an RF emission device such as the Conveyor Antenna is
subject to national regulations that may differ by country.
One important item to consider is the maximum permissible magnetic field intensity at a distance of
10 meters from the antenna that must not exceed 42 dBµA/m in Europe and 104 dBµV/m in the
US.
In compliance with these regulations, only the following two configurations are authorized and will
be installed by approved TAGSYS technical representatives:
Config. 1: 300 x 900 mm. antenna coil with 2 Watt Output Power
Config. 2: 200 x 900 mm antenna coil with 2 Watt Output Power
The Conveyor Antenna meets these limits.
2.2.1 In Europe (CE and RTTE Directives)
The Conveyor Antenna complies (CE Declaration of Conformity granted) with the European EMC
directive.
The Conveyor Antenna complies with the requirements of the Telecommunication Terminal
Equipment Act (FTEG) and the RTTE Directive 1995/5/EC.
Any modification of the Conveyor Antenna is prohibited without the written consent of TAGSYS.
Unauthorized modifications may void the conformity of the equipment to CE and RTTE Directives
and will void the TAGSYS warranty.
It is the responsibility of the TAGSYS Partner to install the Conveyor Antenna as described in
this Installation Guide or in TAGSYS Documentation.
The installation of the conveyor antenna configuration and output power settings by
unauthorized technical personnel is prohibited.
Conveyor Antenna for 270 TL Installation Guide
10/26 Revision 1.0 September 20034
2.2.2 In USA (FCC Directive)
The Conveyor Antenna has been designed to comply with Part 15 of the FCC Rules. Furthermore
typical configurations based on a Medio S002 have been successfully tested with Part 15 of the
FCC rules (FCC ID Number pending).
Conveyor Antenna with Medio L100 Reader
Config. 1: 300 x 900 mm antenna coil with 2 Watt Output Power
Config. 2: 200 x 900 mm. antenna coil with 2 Watt Output Power
WARNING TO USERS IN THE UNITED STATES
FEDERAL COMMUNCIATIONS COMMISSION (FCC) RADIO
INTERFERENCE STATEMENT 47 CFR Section 15.105(b)
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and if not installed and used in accordance with the instructions
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different to that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
NO UNAUTHORIZED MODIFICATIONS
47 CFR Section 15.21
CAUTION: This equipment may not be modified, altered, or changed in any way without signed
written permission from TAGSYS SA. Unauthorized modification may void the equipment
authorization from the FCC and will void the TAGSYS warranty.
ANTENNA REQUIREMENT
47 CFR Section 15.203
CAUTION: This equipment must be professionally installed. The installer shall be responsible for
ensuring that the proper antenna is employed so that the limits in this part are not exceeded. Non-
professional installation or installation of the equipment with an improper antenna may void the
equipment authorization from the FCC and will void the TAGSYS warranty.
Operation is subject to the following two conditions: (1) The system devices may not cause harmful
interference, and (2) The library system devices must accept any interference received, including
interference that may cause undesired operation.
If a Conveyor Antenna is further integrated in a different product, it is the responsibility of the
manufacturer of this complementary product to obtain the required approvals for this product.
Certification
April 2004 Revision 1.0 11/26
2.2.3 In Canada
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel
brouilleur du Canada.
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.
Conveyor Antenna for 270 TL Installation Guide
12/26 Revision 1.0 September 20034
3 Overview
The Conveyor Antenna (Figure 1) has been optimized for use with the TAGSYS Medio L100 and
Medio L200 readers for garment tracking applications.
For Textile Rental and Laundry applications, the Conveyor Antenna is recommended for:
On-the-fly garment identification for automatic sorting
Automatic reading at loading points
An optional signal box is available that indicates a correct tag reading with a buzzer or a flashing
light.
Optimal performance is achieved when the tags to be read are presented in parallel to the
conveyor antenna and centered on the active area antenna according to the internal antenna
configuration.
Several antenna configurations are available inside the shape and have to be carefully linked to
the tag positioning. To identify the best solution for your system, it is strongly recommended to
read the TAGSYS Textile Tag Positioning Guide.
Figure 1: Conveyor Antenna
3.1 Delivery Kit
The items listed in Table 1 are included in the delivery kit.
Table 1: Contents of the Delivery Kit
Quantity Description
1Conveyor Antenna with 2 coaxial cables with 6 ferrite beads each
1TR-L100 Reader Unit
1Signal Box, including 6-meter shielded UL cable (Optional)
1Welcome Letter / Product Return Form
1CD-ROM with:
Conveyor Antenna Installation Guide
Textile Tag Positioning Guide
Overview
April 2004 Revision 1.0 13/26
Figure 2: Full Conveyor Antenna System with the TR-L100 Reader and Signal Box
Conveyor Antenna for 270 TL Installation Guide
14/26 Revision 1.0 September 20034
4 Installation
Before installing the Conveyor Antenna in your industrial laundry or textile rental conveyor system,
it is strongly recommended to read the TAGSYS Textile Tag Positioning Guide that provides
information on how to select the best antenna configuration for your conveyor system.
Figure 3: Standard Upright Installation
4.1 Antenna Location
The antenna is designed for an industrial indoor usage. The recommended position for the
Conveyor Antenna is the upright conveyor configuration.
Using the guidelines provided in the TAGSYS Textile Tag Positioning Guide, identify the best
location of the Conveyor Antenna in relation to the following considerations:
The conveyor drive system
The position of the tags attached to garments and the antenna active area
Garment guide system (either an independent unit or the conveyor antenna panel itself)
L100 Reader cannot be more than 3 meters distant
Possible disturbances (power cables, motors, variable frequency drives, etc.)
1. For optimum performance, always ensure that any metallic or conductive parts are located
behind the antenna.
2. Shortening or extending the supplied coaxial antenna cables may decrease performance.
3. Do not place antenna cables close to other cables, especially power cables
Installation
April 2004 Revision 1.0 15/26
4.2 Antennas Active Area
Several antenna configurations are available and must be carefully linked to the tag positioning.
Figure 4 shows the various antenna configurations used with the conveyor antenna and the 270TL
tag. It is strongly recommended to read the Textile Tag Positioning Guide to decide which
configuration is best adapted to your system.
Figure 4: Conveyor Antenna Configurations for 270TL
The TR-CA7 (300x900) antenna is generally the most popular model for loading or marrying
stations as its configuration provides the greatest continuous vertical reading area (almost 1
meter). In this case, garments of any type or size are easily read when they pass in front of this
antenna.
However, if the garments are presented quickly on the fly on a conveyor in front of the TR-CA7
antenna, some inversion between following garments may occur. In this case, it is best to use the
IMPORTANT: Note that the dimensions of the antennas inside the conveyor antenna housing
given in this document are based on the actual size of the radiating coil and not on the overall
size of the individual antenna unit.
Note that the dimensions of the antennas inside the conveyor antenna housing are based on
the actual size of the radiating coil and not on the overall size of the individual antenna unit.
41cm
4 cm
90cm100cm
30cm
TR CA 7
90cm
30cm
TR CA 7
TR CA7 TR CA8
41cm
90cm
100cm
20cm
100cm
Conveyor Antenna for 270 TL Installation Guide
16/26 Revision 1.0 September 20034
TR-CA8 antenna that has a reduced horizontal reading area (200 mm x 900). In that case 2
following tags at the same time in the reading area almost never happen.
If a large amount of ambient noise is generated by the conveyor system, it is best to reduce the
power of the reader or the size of the top antenna (generally the closest to the noise source). so as
not to affect reading performance. In this case, other conveyor antenna configurations may be
used (see other TR-Ca for single read tag user’s guide).
The reading distances for the various antennas are given in Table 2.
Table 2: Antenna Reading Distances
Radiating Antenna
Coil Dimension Average Reading Distance
(under 2Watts) Average Reading Distance
(under 1Watt)
300 x 900 mm. 150 mm. 110mm
200 x 900 mm. 145 mm. 100mm
4.3 Installing the Conveyor Antenna
The lightweight conveyor antenna can be mounted in any position using brackets. It is
recommended to use brackets made of a non-metallic material. If metallic brackets are used, make
sure that they do not form a loop that may create interference and reduce antenna performance.
Brackets are attached to the Conveyor Antenna at the points shown in Figure 8. M5x14 screws
(metric threaded) are included in the delivery kit for attaching the brackets.
If mounted as shown in Figure 5, the position of the conveyor antenna can then be finely adjusted
in order for the tag positioning area of the garments to coincide with the reading areas of the
conveyor antenna.
Installation
April 2004 Revision 1.0 17/26
Figure 5: Mounting Brackets on Conveyor Antenna
4.3.1 Guides
Guides are often used along the conveyor to protect garments and to ensure that garments are
correctly presented in front of the antenna for valid reading of their tags the hangers and to prevent
them from swinging. In some cases, items can be correctly positioned by having the item brush
against the conveyor antenna as shown in Figure 6.
Figure 6: Conveyor Antenna used as a Guide
CAUTION: Metallic or conductive parts must not be located less than 300 mm. around the
active areas of the Conveyor Antenna.
Conveyor Antenna for 270 TL Installation Guide
18/26 Revision 1.0 September 20034
4.4 Installing the TR-L100 Reader Unit
Once fixed on the conveyor, the 2 BNC cables of the Conveyor Antenna must be connected
(randomly) to Channels 1 and 2 of the Medio L100 reader.
4.5 Installing the Signal/Buzzer Box
A Signal box (optional) is also available for textile rental and laundry applications.
This box is equipped with two signal lamps (green and white) and a buzzer. Delivered with a 6-
meter long cable, this Signal Box is easily connected to the I/O ports of the TR-L100 Reader. The
L200 Explorer software provides a user-friendly configuration system.
The I/O ports and power connections are located on the front panel of the TR-L100 Reader.
Figure 7: Signal Box
In general, the buzzer and green lamp are used to signal that a tag has been correctly read. The
white lamp generally means that the reader unit is switched on or that the tag-reading timeslot is
open.
Table 3: Signal Box Connections
Signal Box Wire TR-L100 Connection Description
White (White Lamp) I/O Port 2 Lights when Trigger is On
Green (Green Lamp) I/O Port 3 Lights when Tag Read is OK
I/O Port 3 Sounds when Tag Read is OK
Black (Buzzer) I/O Port 4 Sounds when Tag Read is not OK
Red (Power) VOUT Power Supply
Note that VOUT must be connected to VIN.
The I/O ports are easily configured using the L200 Explorer software. For more information, refer to
the TR-L100 Reader or L200 Explorer User's Guides.
CAUTION: The reader unit MUST be switched OFF before connecting or disconnecting the
antenna.
Installation
April 2004 Revision 1.0 19/26
4.6 Cabling Requirements
All Conveyor Antenna cables must be correctly shielded. The shielding effectiveness of the
material used should be of good performance (at least 60 dB), especially in the frequency range of
10 to 60 MHz. The addition of ferrite clamps near the reader unit will increase common mode
rejection. TAGSYS antenna products are delivered with good performance shielded coaxial cables
with 6 ferrite beads already mounted to increase shielding effectiveness at low frequencies
(Figure 9).
4.7 Installation Test
After setup, an installation test has to be done to ensure proper functioning:
1. Place 10 pieces of each of the different garment types on the conveyor. Check that the
tags are attached to each garment as specified for actual conveyor antenna
configuration.
2. Run the conveyor.
3. Check that each garment is read.
4. Repeat this procedure 10 times (1000 possible readings).
5. A read rate greater than 98% means the installation is OK.
Conveyor Antenna for 270 TL Installation Guide
20/26 Revision 1.0 September 20034
5 Maintenance
5.1 Servicing the Conveyor Antenna
CAUTION: The Conveyor Antenna contains no operator serviceable parts and must only be
serviced by qualified personnel.
No regular servicing is required, except for keeping the unit clean.
It is recommended that an approved TAGSYS technical representative inspect the electronics unit
at least once per year.
5.2 Servicing the Reader Unit
CAUTION: The Reader Unit contains no operator serviceable parts and must only be serviced
by qualified personnel.
No regular servicing is required, except for keeping the unit clean.
It is recommended that an approved TAGSYS technical representative inspect the electronics unit
at least once per year.
5.3 Servicing the Signal Box
CAUTION: The Signal Box contains no operator serviceable parts and must only be serviced
by qualified personnel.
No regular servicing is required, except for keeping the unit clean.
It is recommended that an approved TAGSYS technical representative inspect the electronics unit
at least once per year.
Technical Data
April 2004 Revision 1.0 21/26
6 Technical Data
6.1 Mechanical Characteristics
Description Value
Housing Plastic ABS UL 94-V0
Dimensions 998 x 418 x 34 mm. (39 x 16 x 1½ in.)
Weight 8 kg. (17.6 lb.)
Color Pantone P536 Blue
Protection Class IP 21
Operating Temperature 0 °C to 55 °C (32 °F to 131 °F)
Storage Temperature -25 °C to +60 °C (-130 °F to 140 °F)
Figure 8: Conveyor Antenna Mechanical Diagram (Mounting Hole Dimensions)
350 mm.
970 mm.
Conveyor Antenna for 270 TL Installation Guide
22/26 Revision 1.0 September 20034
6.2 Electrical Characteristics
Description Value
Input Power
Absolute Maximum Rating
Max. with TR-CA7 Configuration
Max. with TR-CA8 Configuration
8.0 W
2.0 W
2.0 W
Operating Frequency 13.56 MHz
Impedance 50±5 and 0°±5°
Antenna Connection Standard 50-Ohm, BNC connection
Antenna Connection cables Standard 50-Ohm, RG-58 cable (3 m. long) with
6 ferrite beads at the reader unit end.
Typical Performances (*) Reading: 140 mm.
(*) Laboratory test results using a Medio L100 reader and an Ario 10TL tag in a standard upright
configuration. Tag placed in the middle of any of two active areas of the dual 120 x 470 mm.
configuration.
Figure 9: Ferrite Beads with TR-L100 Reader
CAUTION: Only use recommended cable with correct shielding for Signal Box.
The Conveyor Antenna must be connected to the TR-L100 Reader unit using only the
supplied RG-58 cable with 6 ferrite beads fastened at the reader unit end.
For optimum performance in Industrial Laundry and Textile Rental applications using a Medio
L100 reader, apply a typical transmitting power of 3 W and 4 W maximum.
Warranty Conditions
April 2004 Revision 1.0 23/26
7 Warranty Conditions
7.1 Warranty
TAGSYS warrants that its Conveyor Antenna (Product) shall comply with the functional
specifications set forth herein for a period of one year from the date of delivery to the Buyer.
This warranty is valid for the original Buyer of the Product and is not assignable or transferable to
any other party.
TAGSYS cannot be responsible in any way for, and disclaims any liability in connection with the
operation or performance of:
§ any product in which the Product is incorporated;
§ any equipment not supplied by TAGSYS which is attached to or used in connection with the
Product; or,
§ the Product with any equipment.
This warranty only applies to the Product and excludes all other equipment.
Optimal operation and performance of the Product are obtained by using TAGSYS’ readers, by
applying TAGSYS installation guidelines and by having your installation reviewed by a TAGSYS’
technical consultant.
The TAGSYS warranty does not cover the installation, maintenance or service of the Product and
is strictly limited to the replacement of Products considered as defective by TAGSYS and returned
according to the return procedure defined below; in such case, TAGSYS will, at TAGSYS’ option,
either replace every defective Product by one new Product or refund the purchase price paid by
Buyer to TAGSYS for the defective Product.
7.1.1 Warranty Exclusions
The following conditions are not covered under the warranty:
§ Defects or damages resulting from storage of the Product under conditions that do not
comply with TAGSYS specifications or normal usage.
§ Defects or damages resulting from use of the Product in abnormal conditions (abnormal
conditions being defined as any conditions exceeding the ones stated in the product
specifications).
§ Defects or damages from misuse, accident or neglect.
§ Defects from improper testing, operation, maintenance or installation.
§ Defects from alteration, modification except modifications or adjustments specifically
described in this Product reference guide, adjustment or repair, or any attempt to do any of
the foregoing, by anyone other than TAGSYS.
§ Any action on the product that prevents TAGSYS to perform an inspection and test of the
Product in case of a warranty claim.
§ Tampering with or abuse of the Product.
§ Any use or incorporation by the Buyer or a third party of TAGSYS’ Product into life saving
or life support devices or systems, or any related products; TAGSYS expressly excludes
any liability for such use.
Conveyor Antenna for 270 TL Installation Guide
24/26 Revision 1.0 September 20034
7.1.2 General Provisions
This warranty sets forth the full extent of TAGSYS responsibility regarding the Product.
In any event, TAGSYS warranty is strictly limited to (at TAGSYS’ sole option) the replacement or
refund of the Products purchase price to TAGSYS, of Products considered as defective by
TAGSYS.
The remedy provided above is in lieu and to the exclusion of all other remedies, obligations or
liabilities on the part of TAGSYS for damages, whether in contract, tort or otherwise, and including
but not limited to, damages for any defects in the Products or for any injury, damage, or loss
resulting from such defects or from any work done in connection therewith or for consequential
loss, whether based upon lost goodwill, lost resale profits, impairment of other goods or arising
from claims by third parties or otherwise.
TAGSYS disclaims any explicit warranty not provided herein and any implied warranty, guaranty or
representation as to performance, quality and absence of hidden defects, and any remedy for
breach of contract, which but for this provision, might arise by implication, operation of law, custom
of trade or course of dealing, including implied warranties of merchantability and fitness for a
particular purpose.
7.1.3 How to Return Defective Products
The Buyer shall notify TAGSYS of the defects within 15 working days after the defects are
discovered.
Defective Products must be returned to TAGSYS after assignment by a TAGSYS Quality
Department representative of an RMA (Return Material Authorization) number. No Products shall
be returned without their proof of purchase and without the acceptance number relating to the
return procedure.
All Products shall be returned with a report from the Buyer stating the complete details of the
alleged defect.
Call +33 4 91 27 57 36 for return authorization and shipping address.
If returned Products prove to be non-defective, a charge will be applied to cover TAGSYS’ analysis
cost and shipping costs.
If the warranty does not apply for returned Products (due to age, or application of a warranty
exclusion clause), a quote for replacement will be issued, and no replacement will be granted until
a valid purchase order is received. If no purchase order is received within 30 days after the date of
TAGSYS quote, TAGSYS will return the products and charge the analysis cost and shipping costs.
All replaced Products shall become the property of TAGSYS.
The Product Return Form is included on the following page. This form should accompany any
product you need to return to TAGSYS for analysis in the event of a problem.
Warranty Conditions
April 2004 Revision 1.0 25/26
Product Return Form
Customer Profile:
Company: ...............................................................
Address: .................................................................
...............................................................................
...............................................................................
City & State:............................................................
Zip Code:................................................................
Country:..................................................................
Contact Name:.......................................................
Contact e-mail: ......................................................
Contact Phone:......................................................
Contact Fax: ..........................................................
Order identification:
Product Name:........................................................
Order Number (OEF): .............................................
Invoice Number:.....................................................
Return Quantity: ....................................................
Parcel Pick up :
Length: ................................................................... Height: ...............................................................
Width : ................................................................... Weight: ..............................................................
Address to collect the parcel :
...................................................................................................................................................................
...................................................................................................................................................................
...................................................................................................................................................................
...................................................................................................................................................................
Contact: ................................................................. Phone: .............................................................. .
Reason for return:
...................................................................................................................................................................
...................................................................................................................................................................
...................................................................................................................................................................
...................................................................................................................................................................
...................................................................................................................................................................
To inform TAGSYS of this return, please email it to:
valerie.guenegan@tagsys.net and to catherine.thouvenin@tagsys.net
or fax it to your Quality Service representative at +33 (0) 4 91 27 57 02
Address to ship the product:
TAGSYS
180, chemin de Saint Lambert
13821 La Penne sur Huveaune FRANCE
Return Procedure
Conveyor Antenna for 270 TL Installation Guide
26/26 Revision 1.0 September 20034
The product returned will go through stringent quality controls.
A final analysis report will be sent to you as soon as possible.
Please contact your Quality Service representative for further details at
+33 (0) 4 91 27 57 36

Navigation menu