Contents
- 1. Manual
- 2. Manual.pdf
Manual.pdf
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2090892 |
| Application ID | cnqNIOD4RN5Q88hFV3yD7Q== |
| Document Description | Manual.pdf |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 137.22kB (1715212 bits) |
| Date Submitted | 2013-10-17 00:00:00 |
| Date Available | 2013-10-17 00:00:00 |
| Creation Date | 2013-07-26 16:36:59 |
| Producing Software | Bullzip PDF Printer / www.bullzip.com / Freeware Edition |
| Document Lastmod | 2013-07-26 16:36:59 |
| Document Title | Manual.pdf |
| Document Author: | bmajoure |
Medio L40 User's Guide Revision 2.3 July 2013 Medio L40 - User's Guide Publishing Information Disclaimer and Limitation of Liability All information herein is either public information or is the property of and owned solely by TAGSYS who shall have and keep the sole right to file patent applications or any other kind of intellectual property protection in connection with such information. Nothing herein shall be construed as implying or granting to you any rights, by license, grant or otherwise, under any intellectual and/or industrial property rights of or concerning any of TAGSYS’ information. This document can be used for informational, non-commercial, internal and personal use only provided that: The copyright notice below, the confidentiality and proprietary legend and this full warning notice appear in all copies. This document shall not be posted on any network computer or broadcast in any media and no modification of any part of this document shall be made. Use for any other purpose is expressly prohibited and may result in severe civil and criminal liabilities. The information contained in this document is provided “AS IS” without any warranty of any kind. Unless otherwise expressly agreed in writing, TAGSYS makes no warranty as to the value or accuracy of information contained herein. The document could include technical inaccuracies or typographical errors. Changes are periodically added to the information herein. Furthermore, TAGSYS reserves the right to make any change or improvement in the specifications data, information, and the like described herein, at any time. Therefore TAGSYS assumes no liability and is not responsible for customer applications or product or software which includes TAGSYS products. TAGSYS HEREBY DISCLAIMS ALL WARRANTIES AND CONDITIONS WITH REGARD TO THE INFORMATION CONTAINED HEREIN, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT. IN NO EVENT SHALL TAGSYS BE LIABLE, WHETHER IN CONTRACT, TORT OR OTHERWISE, FOR ANY INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER INCLUDING BUT NOT LIMITED TO DAMAGES RESULTING FROM LOSS OF USE, DATA, PROFITS, REVENUES, OR CUSTOMERS, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF INFORMATION CONTAINED IN THIS DOCUMENT. TAGSYS does not and shall not warrant that this product/system/equipment will be resistant to all possible attacks, and shall not incur, and disclaims, any liability in this respect. Even if each product is compliant with current security standards in force on the date of their design, security mechanisms' resistance necessarily evolves according to the state-of-the-art in security and notably under the emergence of new attacks. Under no circumstances shall TAGSYS be held liable for any third party actions, and in particular in case of any successful attack against systems or equipment incorporating TAGSYS products. TAGSYS disclaims any liability with respect to security for direct, indirect, incidental or consequential damages that result from any use of its products. It is further stressed that independent testing and verification by the person using the product is particularly encouraged, especially in any application in which defective, incorrect, or insecure functioning could result in damage to persons or property, denial of service, or loss of privacy. © 2000-2011 TAGSYS. All rights reserved. Microsoft, Visual C++, Windows, and Windows NT are either registered trademarks or trademarks of Microsoft Corporation in the U.S.A. and/or other countries. I-Code is a registered trademark of Philips. TAGSYS, MEDIO, E-connectware are registered trademarks of TAGSYS Printed in France. TAGSYS – 785 Voie Antiope, Athélia III, 13600 La Ciotat, France. Tel: +33 (0) 4.42.18.89.00 / Fax: +33 (0) 4.42.18.89.01 Document Reference: DOC14467B3. July 2013 2.3 2/56 Medio L40 - User's Guide Read This First Welcome to the TAGSYS range of products operating at the 13.56 MHz frequency. This range of products is used to implement high-quality RFID systems for demanding applications. This document provides information about how to install and use the Medio L40 reader. Audience This document requires familiarity with RFID technology. It is intended for people in charge of installing and using the product. Conventions Symbol Meaning CAUTION: A note that advises users that a specific action could result in the loss of data or damage the hardware. WARNING: A note that advises users that a specific action may result in physical harm. A note that provides additional information that helps the user performs a task or obtains the best performance from the product. If you need assistance Please contact your nearest TAGSYS sales representative or the TAGSYS welcome desk at: Telephone: +33 (0) 4 42 18 89 00 Fax: +33 (0) 4 42 18 89 01 E-Mail: info@tagsysrfid.com Website: http://www.tagsysrfid.com Contact for Comments We welcome your feedback to help us provide high quality documentation. For technical comments, please contact our welcome desk: Telephone: +33 (0) 4 42 18 89 00 Fax: +33 (0) 4 42 18 89 01 E-Mail: info@tagsysrfid.com Please remember to quote the Document Reference Number DOC14467B3, your job title and your company. July 2013 2.3 3/56 Medio L40 - User's Guide Quality Issues TAGSYS implements stringent quality controls at all stages of its manufacturing process. However, should you find a defect with this product, please notify your TAGSYS Quality Service representative using the dedicated Product Return Form. 4/56 Telephone: +33 (0) 4 42 18 89 00 Fax: +33 (0) 4 42 18 89 01 E-Mail: rma@tagsysrfid.com Revision 2.3 July 2013 Medio L40 - User's Guide Table of Contents PUBLISHING INFORMATION __________________________________________________________ 2 DISCLAIMER AND LIMITATION OF LIABILITY___________________________________________________ 2 READ THIS FIRST ____________________________________________________________________ 3 AUDIENCE _____________________________________________________________________________ 3 CONVENTIONS _________________________________________________________________________ 3 IF YOU NEED ASSISTANCE ________________________________________________________________ 3 CONTACT FOR COMMENTS _______________________________________________________________ 3 QUALITY ISSUES _______________________________________________________________________ 4 1 FOR YOUR SAFETY _______________________________________________________________ 8 1.1 GENERAL USE _____________________________________________________________________ 8 1.2 CARE AND MAINTENANCE ___________________________________________________________ 8 1.3 IMPORTANT SAFETY INFORMATION ____________________________________________________ 9 1.3.1 OPERATING ENVIRONMENT ________________________________________________________ 9 2 CERTIFICATION __________________________________________________________________ 10 2.1 OCCUPATIONAL HEALTH AND SAFETY NOTICES _________________________________________ 10 2.2 REGULATORY NOTICES ____________________________________________________________ 10 2.2.1 IN EUROPE (CE AND RTTE DIRECTIVES) ____________________________________________ 10 2.2.2 FCC ID CROSS REFERENCE TABLE ________________________________________________ 10 2.2.3 IN USA (FCC DIRECTIVE)_________________________________________________________ 14 2.2.4 IN CANADA _____________________________________________________________________ 15 2.3 ROHS AND WEEE DIRECTIVES ______________________________________________________ 15 2.3.1 ROHS (RESTRICTION OF THE USES OF CERTAIN HAZARDOUS SUBSTANCES) _______________ 15 2.3.2 WEEE (W ASTE ELECTRICAL AND ELECTRONIC EQUIPMENT) ____________________________ 16 3 OVERVIEW_______________________________________________________________________ 17 3.1 KEY FEATURES ___________________________________________________________________ 18 3.2 DELIVERY _______________________________________________________________________ 19 3.3 PHYSICAL DESCRIPTION ____________________________________________________________ 19 3.3.1 FRONT PANEL __________________________________________________________________ 19 3.3.2 REAR PANEL ___________________________________________________________________ 20 4 INSTALLATION ___________________________________________________________________ 21 4.1 MECHANICAL ASPECTS ____________________________________________________________ 21 4.2 CABLING REQUIREMENTS___________________________________________________________ 21 4.3 USING USB INTERFACE ____________________________________________________________ 22 4.3.1 INSTALLING USB DRIVERS ________________________________________________________ 22 4.3.2 USING THE USB INTERFACE _______________________________________________________ 22 4.4 USING RS-232 INTERFACE _________________________________________________________ 23 4.5 USING 10/100 ETHERNET INTERFACE_________________________________________________ 23 4.6 RESTORING FACTORY CONFIGURATION _______________________________________________ 24 July 2013 2.3 5/56 Medio L40 - User's Guide 4.7 RUNNING TAGSYS EXPLORER FOR THE FIRST TIME ____________________________________ 24 4.7.1 INSTALLING TAGSYS EXPLORER ____________________________________________________ 24 4.7.2 CONNECTING TO A DEVICE USING TAGSYS EXPLORER W IZARD __________________________ 26 4.7.3 READING THE UID OF ISO 15693 TAGS _____________________________________________ 31 4.7.4 READING AND W RITING ISO 15693 TAG MEMORY _____________________________________ 32 4.7.5 UPGRADING SYSTEM OR RADIO FIRMWARE __________________________________________ 33 5 ADVANCED NOTIONS ____________________________________________________________ 36 5.1 READER ARCHITECTURE ___________________________________________________________ 36 5.2 READER TO HOST PROTOCOLS ______________________________________________________ 37 5.2.1 TAGSYS STXNG _______________________________________________________________ 37 5.2.2 HEARTBEAT ____________________________________________________________________ 37 5.2.3 TELNET ________________________________________________________________________ 38 5.2.4 SERIAL CONSOLE ________________________________________________________________ 38 5.2.5 STANDALONE MODE _____________________________________________________________ 39 5.3 READER OPERATION PRINCIPLES_____________________________________________________ 39 5.3.1 NOTION OF READ MODES _________________________________________________________ 40 5.3.2 NOTION OF EVENTS ______________________________________________________________ 40 6 TECHNICAL SPECIFICATIONS ____________________________________________________ 42 6.1 TECHNICAL DATA _________________________________________________________________ 42 6.2 RS232 INTERFACE ________________________________________________________________ 43 6.3 GPIO CONNECTOR ________________________________________________________________ 44 6.3.1 PIN ASSIGNMENT ________________________________________________________________ 44 6.3.2 ELECTRICAL CHARACTERISTICS ____________________________________________________ 44 6.3.3 USING INPUTS __________________________________________________________________ 44 6.3.4 USING OUTPUTS ________________________________________________________________ 46 7 ELECTRICAL CHARACTERISTICS _________________________________________________ 47 7.1 7.2 7.3 7.4 7.5 7.6 ABSOLUTE MAXIMUM RATINGS ______________________________________________________ 47 POWER SUPPLY DC CHARACTERISTICS AND START-UP __________________________________ 48 RS232 COMMUNICATION PORT CHARACTERISTICS _____________________________________ 49 USB COMMUNICATION PORT CHARACTERISTICS _______________________________________ 50 ANTENNA ELECTRICAL CHARACTERISTICS _____________________________________________ 50 INPUT / OUTPUT ELECTRICAL CHARACTERISTICS _______________________________________ 51 8 MECHANICAL CHARACTERISTICS ________________________________________________ 52 8.1 DIMENSIONS AND GENERAL MECHANICAL INFORMATION _________________________________ 52 8.2 FIXING THE PRODUCT ______________________________________________________________ 52 9 WARRANTY CONDITIONS_________________________________________________________ 53 9.1 WARRANTY ______________________________________________________________________ 53 9.2 WARRANTY EXCLUSIONS ___________________________________________________________ 53 9.2.1 GENERAL PROVISIONS ___________________________________________________________ 54 9.2.2 HOW TO RETURN DEFECTIVE PRODUCTS ____________________________________________ 54 10 MEDIO L40 PRODUCT END OF LIFE MANAGEMENT _______________________________ 56 6/56 Revision 2.3 July 2013 Medio L40 - User's Guide July 2013 2.3 7/56 Medio L40 - User's Guide 1 For Your Safety 1.1 General Use The Medio L40 reader is designed to be reliable and to provide continuous, trouble-free service. Please observe the following general tips: Take care not to scratch the device. Keep the device clean. When working with the device, use only TAGSYS-approved accessories. This device is not waterproof and should not be exposed to rain or moisture. Under extreme conditions, water may enter the circuitry. Protect the device from extreme temperatures. For example, do not place the device in a windowed area where the sun may cause extreme temperatures, and keep it away from heaters and other heat sources. Do not store or use the device in any location that is extremely dusty, damp, or wet. Use a soft, damp cloth to clean the device. If the surface of the device becomes soiled, clean it with a soft cloth moistened with a diluted window-cleaning solution. MEDIO L40 shall be supplied by LPS (limited power source) power supply in accordance to clause 2.5 of UL/IEC 60950-1 Edition 2 with following ratings 24Vdc, 1.6A min suitable for a minimum 40°C (104°F). Only use the recommended Powe r Supply Unit A2-50S18R-V manufactured by VP ELECTRONIQUE or VEH40US24 manufactured by XP Power. 1.2 Care and Maintenance This device should be handled with care. The suggestions below will increase the lifetime of this device. 8/56 • Keep the device and all parts and accessories out of the reach of small children. • Keep the device dry. Precipitation, humidity and liquids contain minerals that will corrode electronic circuits. • Do not use or store the device in dusty, dirty areas. Its moving parts can be damaged. • Do not store in hot areas. High temperatures can shorten the life of electronic devices, damage batteries and warp or melt certain plastics. • Do not store in cold areas. When the device warms up (to its normal temperature), moisture can form inside the device, which may damage electronic circuit boards. • Do not attempt to open the device. Non-professional handling of the device may damage it and will void the TAGSYS warranty. • Handle the device with care. Shock and vibration may break internal circuit boards. • Do not clean the device with harsh chemicals, cleaning solvents or strong detergents. Gently wipe the device with a soft cloth slightly dampened in a mild soap-and-water solution. • Do not paint the device. Paint may clog the device’s moving parts and prevent proper operation. Paint with metallic contents may limit device performances. • If the device or any accessory are not working properly, take it to your nearest qualified TAGSYS representative. Revision 2.3 July 2013 Medio L40 - User's Guide CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Please see section 2.3.2 WEEE (Waste Electrical and Electronic Equipment) for more details. 1.3 Important Safety Information 1.3.1 Operating Environment When connecting the device or any accessory to another device, read its user’s guide for detailed safety instructions. Do not connect incompatible products. As with all RF equipment, users are advised that the equipment should only be used in its normal operating mode described in this document. July 2013 2.3 9/56 Medio L40 - User's Guide 2 Certification 2.1 Occupational Health and Safety Notices TAGSYS Products have been designed not to exceed the limits given in the European Standard EN 50364 “Limitation of human exposure to electromagnetic fields from devices used in Electronic Article Surveillance (EAS), Radio Frequency Identification (RFID) and similar applications” in conjunction with the European Standard EN 50357 describing how to evaluate the exposure level. It is the responsibility of the TAGSYS Partner to install the Medio L40 as described in TAGSYS Documentation and with the appropriate antennas. Modification of any TAGSYS System is prohibited without the written consent of TAGSYS. Unauthorized modifications may void the conformity of the equipment to safety standards and will void the TAGSYS warranty. An RF fields survey has been carried out on all the TAGSYS System components, in accordance with AS/NZS 2771.1: Radio Frequency Radiation, Part 1. According to this standard the maximum allowable RF exposure levels (non-occupational) at 3 kHz to 300 GHz are 200 µW/cm2. 2.2 Regulatory Notices An RFID system typically composed of an RF emission device such as the Medio L40 is subject to national regulations that may differ by country. One important item to consider is the maximum permissible magnetic field intensity at a distance of 10 meters from the antenna that must not exceed 42 dBµA/m in Europe and 38 dBµA/m in US. The Medio L40 meets these limits. It is the responsibility of the TAGSYS Partner to install the Medio L40 as described in this User’s Guide or in TAGSYS Documentation. 2.2.1 In Europe (CE and RTTE Directives) The Medio L40 complies (CE Declaration of Conformity granted) with the European EMC directive. The Medio L40 complies with the requirements of the Telecommunication Terminal Equipment Act (FTEG) and the RTTE Directive 1995/5/EC. It is the responsibility of the TAGSYS Reseller to install the Medio L40 as described in this Reference guide or TAGSYS Documentation. Any modification of the Medio L40 is prohibited without the written consent of TAGSYS. Unauthorized modifications may void the conformity of the equipment to CE and RTTE Directives and will void the TAGSYS warranty. If a Medio L40 is further integrated in a different product, it is the responsibility of the manufacturer of this complementary product to obtain the required approvals for this product. 2.2.2 FCC ID Cross Reference Table It is the responsibility of the TAGSYS Partner to install the Medio L40 as described in the table below, taking care of only installing the right antenna configuration with the right power settings. 10/56 Revision 2.3 July 2013 Medio L40 - User's Guide Table 1: Medio L40 FCC ID Cross reference Table Antenna Aero LB Antenna Outside Dimension 250X250 Channel Setting Single Channel Multiplexer Single RF Port Max. Output Power 5W Power Supply A2-50S18R-V VEH40US24 FCC ID QHKMEDIOL40 5W Aero LC Antenna 400X500 Single Channel Single RF Port A2-50S18R-V VEH40US24 QHKMEDIOL40 1.5W L-SA3 Antenna 250X330 Single Channel Single RF Port A2-50S18R-V VEH40US24 QHKMEDIOL40 1W L-SA4 Antenna 220X220 Single Channel Single RF Port A2-50S18R-V VEH40US24 QHKMEDIOL40 5W MAT Antenna Laundry Stack Antenna 130X480 Single Channel Single RF Port A2-50S18R-V VEH40US24 2W 640x430 Single Channel Single RF Port QHKMEDIOL40 A2-50S18R-V VEH40US24 QHKMEDIOL40 To comply with band edge regulation, when used in vertical upright position the Aero LB and Aero LC antennas can read tags in the following RFID uplink protocols configurations Table 2: Medio L40 FCC ID Cross reference Table Antenna Aero LB Antenna Outside Dimension 250x250 Channel Setting QuadChannel Multiplexer Max. Output Power 5W Active Power Supply A2-50S18R-V VEH40US24 FCC ID QHKMEDIOL40 5W Aero LC Antenna 400X500 QuadChannel A2-50S18R-V Active VEH40US24 QHKMEDIOL40 5W MAT Antenna July 2013 130x480 QuadChannel A2-50S18R-V Active VEH40US24 2.3 QHKMEDIOL40 11/56 Medio L40 - User's Guide 3.5W TR-CAU Antenna 998x418 TwoChannel Active VEH40US24 2W Tunnel antenna 500X500 QuadChannel A2-50S18R-V Active QHKMEDIOL40 A2-50S18R-V VEH40US24 TBL 060-124 QHKMEDIOL40 ABL 7RM24025 To comply with band edge regulation, when used in vertical upright position the Aero LB antenna can read tags in the following RFID uplink protocols configurations To comply with band edge regulation, when reading ISO15693 tags TR-CAU antenna can read tags in the following RFID uplink protocols configurations In I-Code 1 (C270) parameters window set the uplink parameters as follow: Bit Coding: “Standard” (1 out of 256 pulse) 12/56 Revision 2.3 July 2013 Medio L40 - User's Guide In ISO15693 Parameters window set the uplink parameters as follow: Command modulation depth: 10% (ASK) EOF modulation depth: 10% (ASK) Data coding mode: 1 of 256 July 2013 2.3 13/56 Medio L40 - User's Guide 2.2.3 In USA (FCC Directive) The Medio L40 has been designed to comply with Part 15 of the FCC Rules. Furthermore typical configurations listed section 2.2.2 FCC ID Cross Reference Table have been successfully tested with Part 15 of the FCC rules (FCC ID Numbers are listed on all system-mounted TAGSYS Antennas). Medio L40 WARNING TO USERS IN THE UNITED STATES FEDERAL COMMUNCIATIONS COMMISSION (FCC) RADIO INTERFERENCE STATEMENT 47 CFR Section 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ▪ Reorient or relocate the receiving antenna. ▪ Increase the separation between the equipment and receiver. ▪ Connect the equipment into an outlet on a circuit different to that to which the receiver is connected. ▪ Consult the dealer or an experienced radio/TV technician for help. NO UNAUTHORIZED MODIFICATIONS 47 CFR Section 15.21 CAUTION: This equipment may not be modified, altered, or changed in any way without signed written permission from TAGSYS SA. Unauthorized modification may void the equipment authorization from the FCC and will void the TAGSYS warranty. ANTENNA REQUIREMENT 47 CFR Section 15.203 CAUTION: This equipment must be professionally installed. The installer shall be responsible for ensuring that the proper antenna is employed so that the limits in this part are not exceeded. Nonprofessional installation or installation of the equipment with an improper antenna may void the equipment authorization from the FCC and will void the TAGSYS warranty. Operation is subject to the following two conditions: (1) The system devices may not cause harmful interference, and (2) The system devices must accept any interference received, including interference that may cause undesired operation. 14/56 Revision 2.3 July 2013 Medio L40 - User's Guide 2.2.4 In Canada Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante. This radio transmitter (IC: 7562A-MEDIOL40) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Le présent émetteur radio (IC: 7562A-MEDIOL40) a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal et l'impédance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur. The Medio L40 device has been designed to operate with the antennas listed below, and having a maximum gain of -25 dBi. Antenna not included in this list or having a gain greater than -25 dBi are strictly prohibited for use with this device. The required antenna impedance is 50 ohms. Aero LB, Aero LC, LSA3, LSA4, Mat Antenna, Laundry Stack and TR-CAU antennas meet this requirement with a gain less than -25dBi. Le lecteur Medio L40 a été conçu pour fonctionner avec les antennes citées ci-dessous et ayant un gain maximum de -25dBi. Les antennes non inclus dans cette liste ou ayant un gain supérieur à -25dBi sont strictement interdites pour un usage avec ce lecteur. L’impédance de l’antenne doit être de 50 ohms. Les antennes Aero LB, Aero LC, LSA3, LSA4, Mat antenna, Laundry Stack et TR-CAU satisfont à cette exigence avec un gain inférieur à -25dBi. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. 2.3 RoHS and WEEE Directives 2.3.1 RoHS (Restriction of the uses of certain Hazardous Substances) TAGSYS certifies that this product is compliant with the European Directive 2002/95/EC for the restriction in Electric and Electronic Equipments (RoHS) of the use of the following hazardous substances: • July 2013 Lead 2.3 15/56 Medio L40 - User's Guide • Mercury • Cadmium • Hexavalent Chromium • Polybrominated biphenyl flame retardants • Polybrominated diphenyl ether flame retardants This declaration is based on information provided by our suppliers and subcontractors. 2.3.2 WEEE (Waste Electrical and Electronic Equipment) This product bears the selective sorting symbol for waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European Directive 2002/96/EC in order to be recycled or dismantled to minimize its impact on the environment. For further information, please contact your local or regional authorities. 16/56 Revision 2.3 July 2013 Medio L40 - User's Guide 3 Overview The Medio L40 is a long-range 13.56MHz RFID reader intended for RFID applications requiring a high performance, long range RFID infrastructure. The L40 uses advances in Digital Signal Processing (DSP) and RF Front End technology to achieve breakthrough performance in read range and read speed with industry leading signal to noise ratio. The L40 has been specifically designed to operate in noisy environments such as manufacturing plants and distribution facilities while maintaining the highest levels of data integrity for item level track and trace, inventory management and security. Designed as a network device, the L40 conserves critical network bandwidth by filtering tag data to remove redundancies before transmitting to enterprise systems. With breakthrough sensor technology and self-diagnostic capability, the L40 is the industry’s first self-correcting intelligent RFID reader. The L40 can be remotely managed and administered to ensure you get the highest levels of performance from your RFID infrastructure. The L40 and econnectware, TAGSYS’ comprehensive set of management and administrative tools, create an intelligent platform to allow you to manage your RFID infrastructure just as you do a voice or data network to enable scalable, secure and persistent RFID Quality of Service. July 2013 2.3 17/56 Medio L40 - User's Guide 3.1 Key Features Table 3: Medio L40 Key Features Description Medio L40 Operating Frequency 13.56 MHz Chip Compatibility C210 C220 ISO15693 ISO18000-3 Mode 1 C370 (I-Code SLI) C370L (I-Code SLI-L) C370S (I-Code SLI-S) C270 (I-Code 1) I-Code ePC I-Code UID Upgradable to the anticipated EPC global HF Gen2 Standard Number of channels RF Output Power 500mW to 5W RF Output Tolerance +/- 5% at 5W Communication Interfaces RS232 (up to 115200 bauds) USB 2.0 Full Speed Compatible 10/100 Ethernet Communication Protocols TAGSYS StxNG Telnet & Serial Console Standalone Mode Heartbeat I/O Ports (GPIO) 2 Inputs/Outputs Remote Monitoring Many health indicators are remotely accessible, such as : . System uptime, . Read/Write count (per channel), . RF power amplifiers consumption, . RF power amplifiers operating temperature, . Antennas tuning status, . Real-time Raw signal capture, … Firmware Remotely upgradeable RTC Not battery-backed 18/56 Revision 2.3 July 2013 Medio L40 - User's Guide 3.2 Delivery The Medio L40 reader kit contains the following items: Table 4: Package Contents Quantity Item Medio L40 reader CD-ROMs : • Medio L40 User’s Guide & Medio L400/L40 Designer’s guide • USB Drivers for Windows® 2000, 2003, XP, Vista & Seven • TAGSYS Explorer software (reader configuration and upgrade on Windows® 9x, NT®, 2000, XP, Vista & Seven platforms) • Software development kits (SDKs) including documentation and sample codes (Win32 Native DLL, .NET component, JAVA archive) Welcome Letter / Product Return Form 3.3 Physical Description 3.3.1 Front Panel The front panel is dedicated to RF connectors. Figure 1: Front panel • RF connectors and status LEDs : The Medio L40 can handle up to 4 antennas. The connectors provided are SMA. RF output power is software selectable from 500mW to 5W in 250mW increments. One red LED indicates current RF power status. Four green LED indicate current RF channel selected. • Extension connectors : For TAGSYS Internal use only. July 2013 2.3 19/56 Medio L40 - User's Guide 3.3.2 Rear Panel The rear panel is dedicated to the power supply and communication connectors. Figure 2: Rear panel • 10/ 100 Ethernet Connector RJ 45 connector (Please refer to the Ethernet network cabling rules). • USB Connector USB connector type B. Use standard A/B cable to connect to the host (not included in the package). • RS-232 Connector RS232 protocol has been implemented through a RJ 45 connector. A RJ45 to DB9 adapter is needed to connect to the host. Please see section 6.2 RS232 Interface for more details. • GPIO connector: A Male connector on the reader’s rear panel implements 2 digital inputs/outputs (N-Channel Open Drain). Please see section 6.3 GPIO Connector for more details. • 24VDC Connector A power supply connector. Please see section 4.2 Cabling Requirements for more details • Synchronization Connector For TAGSYS Internal use only. • Reset Button This button allows restoring the reader to its factory settings. Please see section 0 Restoring Factory Configuration for more details. 20/56 Revision 2.3 July 2013 Medio L40 - User's Guide 4 Installation This section describes how to install the Medio L40 reader. 4.1 Mechanical Aspects The Medio L40 is delivered six slots allowing easily fastening off the reader on your system. Please see section Erreur ! Source du renvoi introuvable. Mechanical Data for more details. 4.2 Cabling Requirements 2-ways Male connector mounted on board can accept these references of 2-ways female connectors (2 ways, 3.81mm): • Phoenix Contact references: -1851041 -1850660 -1803578 • Wurth Electronic Reference: - 691361300002 (Serie 361 WR-TBL) Please refer to section 3.3.1 Front Panel to identify the power supply connector. +24V DC GND Connect your power supply to the provided 2-ways connector respecting the wiring described above. Before plugging the connector to the reader, verify the polarity. Reverse polarity may damage the reader. Connect the reader to the host system using one of the available interfaces (USB, RS-232 or Ethernet), Connect one or several antennas to reader channels. Connect the power supply to the mains supply. July 2013 2.3 21/56 Medio L40 - User's Guide For USA and countries under FCC Part 15 regulation only use the Antenna and Power Supply Unit combination tested and specified in the cross reference table of the corresponding Medio L40 (see section 2.2.2 FCC ID Cross Reference Table). The use of any other combination of reader version, antenna type and Power Supply Unit is subject to obtaining a specific FCC ID either by TAGSYS or by its Qualified Partner under TAGSYS supervision. For other countries, only use Power Supply Units GS40A24-P1J or A2-50S18R-V or FRA045E-S24-4. If using any other Power Supply Unit , the selected Power Supply Unit must meet all following criteria: • UL Listed UL60950 and CB Certified for Information Technology Equipment • Class B Emission CISPR22 EN55022 • CE marked • LPS 4.3 Using USB Interface 4.3.1 Installing USB Drivers At first connection to the PC USB port, Windows® will detect the TAGSYS Medio L40 reader and will ask to install a driver. The USB drivers are located into the USB Drivers folder on the product CD-ROM. Two drivers will be installed: The USB device driver. The virtual COM port (VCP) driver. The VCP driver emulates a standard PC COM port. After installation of the drivers, power up and connect your Medio L40 to a spare USB port on your PC to launch the Windows Found New hardware Wizard Select “No, not this time” and click next to proceed with the installation. Select “Install from a list or specific location (Advanced)” and then click “Next”. Select “Search for the best driver in these locations” and click the Browse button to select the TAGSYS USB Drivers folder on the Product CR-Rom. Then click “Next” to proceed. Windows should then display a message indicating that the installation was successful. Click Finish to complete the installation. Repeat the procedure above when Windows® asks for drivers again (virtual com port). In order to confirm that the installation has completed successfully, open the Device Manager and select “View > Devices by type”. The TAGSYS Medio L40 reader now appears as an additional COM port. Drivers for Windows 98 are not provided. They are available upon request (please contact TAGSYS). 4.3.2 Using the USB interface Once the USB drivers are properly installed, the reader appears as a new COM port. Simply connect to this COM port at 115200 Bauds to access the reader. 22/56 Revision 2.3 July 2013 Medio L40 - User's Guide Virtual COM port speed is always 115200 Bauds and cannot be changed. 4.4 Using RS-232 Interface RS-232 interface does not require specific drivers’ installation. Default RS-232 speed is 115200 bauds, and can be modified by software. Supported baud rates are 4800 bauds, 9600 bauds, 19200 bauds, 38400 bauds, 57600 bauds and 115200 bauds. Please see section 6.2 RS232 Interface for more details. Beware to plug your RS-232 interface on the correct RJ45 connector (i.e. RS232) 4.5 Using 10/100 Ethernet Interface 10/100 Ethernet interface does not require specific drivers installation. Default TCP/IP configuration is the following: Table 5: Default TCP/IP configuration Parameter Value DHCP Active (The reader will try to automatically configure using DHCP. If it fails, the reader will use the following fallback configuration) Fallback IP Address 169.254.0.100 Fallback Netmask 255.255.0.0 Fallback Gateway 169.254.0.1 The MAC address of each reader is written on a sticker positioned at the bottom right corner of the reader. The green Ethernet Activity LED acts as well as the Ethernet Link LED. Green LED constantly ON signals that the reader is connected to an Ethernet network. Green LED starts blinking to signal activity on the Ethernet with the L40 reader. Orange LED is only used to provide feedback on the reader being powered up or not. Beware to plug your Ethernet interface on the correct RJ45 connector (i.e. Ethernet) Either straight or crossed Ethernet cable can be used, as the reader auto-detect the cable type. July 2013 2.3 23/56 Medio L40 - User's Guide All cables must be correctly shielded. The shielding effectiveness of the material used should be of good performance (60 dB minimum), especially in the frequency range of 10 to 60 MHz. The addition of ferrite clamps near the reader unit will increase common mode rejection. TAGSYS antenna products are delivered with good performance shielded coaxial cables with 6 ferrite beads already mounted to increase shielding effectiveness at low frequencies. 4.6 Restoring Factory Configuration To restore factory configuration, please follow these steps: Turn reader off. Press and hold the “Reset” button. Turn reader on. After 3 seconds, release the “Reset” button. Default configuration is now restored. 4.7 Running TAGSYS Explorer for the First Time The Medio L40 reader is delivered with the TAGSYS Explorer software tool intended to easily setup the reader, test it and perform RFID reading and writing operations. In addition, TAGSYS Explorer can be used to display additional information about the reader (Firmware and hardware versions and revisions) as well as to upgrade reader firmware. This section describes how to start with TAGSYS Explorer. 4.7.1 Installing Tagsys Explorer TAGSYS Explorer is based Microsoft’s .NET technology and requires the following minimum system configuration: • IBM-PC compatible computer with a 400 MHz or higher processor (1 GHz recommended) ; • Microsoft® Windows 2000 SP 3, Windows Server 2003, Windows XP SP 2, Windows Vista or windows Seven operating system recommended. Microsoft® Windows 98, Windows 98 SE, Windows ME legacy operating systems are supported but not recommended ; • Microsoft® .NET Framework version 2.0 or 3.0 ; • 128 megabytes (MB) of RAM (256 MB recommended) ; • 300 MB of free hard disk space. This includes .NET Framework requirements ; • 1024x768 16-bits (1280x1024, 32-bits recommended) ; • CD-ROM drive ; • 1 serial port and/or 1USB port and/or 1 Ethernet port. To install the TAGSYS Explorer software on your PC: 1. Insert the product CD-ROM into the disk drive on your PC. 2. In Windows Explorer, open the CD-ROM drive window and run “TAGSYS Explorer Installer.msi” in “TAGSYS Explorer” folder. 24/56 Revision 2.3 July 2013 Medio L40 - User's Guide Figure 3: Setup Welcome window 3. Click Next to view the license agreement, then click Next again if you agree with the terms. 4. The Destination Location window is displayed. Select the folder where TAGSYS Explorer will be installed. Figure 4: Select Installation Folder window July 2013 2.3 25/56 Medio L40 - User's Guide 5. Once the correct folder is selected, click Next. Figure 5: Confirm Installation window 6. Click Next to start the installation process. A shortcut will be created on your desktop and a program group will be created in the start menu. 4.7.2 Connecting to a device using Tagsys Explorer Wizard This section describes how to get started using the TAGSYS Explorer software and configure it. Before running TAGSYS Explorer, connect your RFID reader to the serial/USB port of the PC or to your TCP/IP network. Connect an antenna to the reader (Channel 1) and turn reader on. Once the reader is ready, run the TAGSYS Explorer program and the main window will be displayed. 26/56 Revision 2.3 July 2013 Medio L40 - User's Guide Figure 6: TAGSYS Explorer window Menu bar Toolbar Status bar The “TAGSYS Explorer Wizard” opens automatically when TAGSYS Explorer is started for the first time. This wizard allows you to quickly set up the TAGSYS Explorer to perform basic tasks such as configuring your RFID device and read or write tags. July 2013 2.3 27/56 Medio L40 - User's Guide Figure 7: TAGSYS Explorer Wizard If the “TAGSYS Explorer Wizard” does not open automatically, click on the “Wizard” icon in the toolbar or choose “Wizard…” in the “Explorer” menu. Read the instructions given by the wizard and click “Next >” to continue. Figure 8: Device Selection page 28/56 Revision 2.3 July 2013 Medio L40 - User's Guide The TAGSYS Explorer Wizard can automatically discover and display RFID devices plugged into your computer’s serial or USB ports or connected on a TCP/IP network. Discovered devices are displayed under the “Discovered Devices” group. The same device can be displayed one or more times depending on the number of communication interfaces (Serial/USB, Ethernet) this device is connected to. The preferred connection is the “Ethernet” interface when available as it is the fastest communication interface. You can restart a discovery at any time by clicking “Discover Devices”. Devices that have been previously registered in TAGSYS Explorer will appear under the “Favorite Devices” group. Favorite Devices are shortcuts to devices you are working with often and can be managed using the “Favorite Devices” panel. See TAGSYS Explorer User’s Guide for more information. To continue, choose the device you would like to use and click “Next >”. If necessary, this device will be automatically added to your “Favorite Devices”. If a device with the same interface details appears both in “Favorite Devices” and in “Discovered Devices” groups, it does not matter in which group you select this device. Figure 9: Task Selection page If you want to set up your device parameters, such as changing its description or its interfaces settings, check “I want to configure device’s system, interfaces or services”. If you want to read tags, write their memory or send specific tag commands, check “I want to read or write tags on:” You can then choose the radio that should be used for emitting and receiving. Medio L40 only supports one radio (Radio #0). In the “Radio Parameters” section, choose the settings you would like to use. For demonstration purposes, please select the same settings as shown in previous figure. Then, click “Next >” to continue. July 2013 2.3 29/56 Medio L40 - User's Guide Figure 10: Wizard Summary page Verify the summary of all selected parameters chosen and click “Finish” to confirm. TAGSYS Explorer will then automatically open the panels you need and apply the radio configuration you have chosen. The following screen appears: 30/56 Revision 2.3 July 2013 Medio L40 - User's Guide Figure 11: TAGSYS Explorer workspace configured RF/Reading controls Read Events panel Read and RF Channels Configuration panels ISO15693 Parameters and Commands panel 4.7.3 Reading the UID of ISO 15693 tags If you have not configured your device using the TAGSYS Explorer wizard as explained in section 4.7.1 Installing TAGSYS Explorer, please do so before proceeding. To start reading using the configuration the wizard has applied: 1. Click button in the tool bar to turn the radio field on. CAUTION: Make sure an antenna is plugged in the channel that will be used for reading before turning the radio field on. Turning on the radio field on a channel without an antenna reduces the lifetime of the reader. 2. Click button in the tool bar to start reading tags. If the radio field is not turned on, TAGSYS Explorer will request your permission to turn it on; click “OK” to accept. Again, make sure an antenna is plugged in to the channel before accepting. 3. Place ISO 15693 tags in the radio field of channel #1 antenna. Tags appear in the “Read Events” panel as they are read. A counter indicates how many times they have been read on each device’s channel since the read session beginning. July 2013 2.3 31/56 Medio L40 - User's Guide Figure 12: TAGSYS Explorer reading ISO 15693 tags 4. Click the button in the tool bar when you are finished reading. You may want to turn the radio field off as well by clicking the button. 4.7.4 Reading and Writing ISO 15693 tag memory If you have not configured your device using TAGSYS Explorer wizard as explained in section 4.7.2 Connecting to a device using Tagsys Explorer Wizard, please do so before proceeding. This section shows how to read and write ISO15693 tag memory. 1. Radio field must be turned on. Click the field on. button in the toolbar to turn the radio 2. Click the “Memory” tab of the ISO15693 panel. This tab contains all memory-related commands. 32/56 Revision 2.3 July 2013 Medio L40 - User's Guide Figure 13: Memory tab of ISO 15693 panel 3. In the “Single Block Operations” box, select the block and data you want to write (data is hexadecimal). You can pad bytes with whitespaces if you wish, but this is not required. Figure 14: Single Block Operations The length in bytes of a single block depends on the tag manufacturer, but most ISO 15693 tags use four bytes blocks. See TAGSYS Explorer User’s Guide for more information. 4. Place a single ISO15693 tag in the radio field of the channel 1 antenna. 5. Click “Write” to write data to the block. If writing is successful, no error message appears. To check block data, clear the “Data” field and click “Read” to read data back from the block. 4.7.5 Upgrading System or Radio Firmware If you have not configured your device using TAGSYS Explorer wizard as explained in section 4.7.2 Connecting to a device using Tagsys Explorer Wizard, please do so before proceeding. Two different firmware sets can be upgraded in your RFID reader: • System firmware (The system is in charge of interfacing one or several radios to a host through various interfaces and protocols) • Radio firmware (The radio is in charge off all RFID operations). July 2013 2.3 33/56 Medio L40 - User's Guide To upgrade system firmware: 1. Open “Favorite Devices” panel by clicking on the “Favorite Devices” in the “Device” menu. icon in the tool bar or by choosing 2. Connect to the device you want to upgrade by selecting it and clicking on the icon. 3. In the drop down menu, choose “Upgrade System Firmware…” Alternatively, you may also right-click the device and choose “Upgrade System Firmware…” 4. In the “Firmware Upgrade” dialog box, select the firmware file, enter its associated passphrase if necessary and click “Upgrade”. Figure 15: System firmware upgrade CAUTION: Do not turn off the device during the upgrade as this may permanently corrupt the system firmware. 5. Once the upgrade is completed, click “Reboot” to reboot the device immediately. If you need to upgrade another set of firmware of the device click “Don’t Reboot”. Figure 16: System firmware upgrade completed To upgrade radio firmware: 1. Open “Favorite Devices” panel by clicking on the “Favorite Devices” in the “Device” menu. icon in the tool bar or by choosing 2. Connect to the device that you want to upgrade the radio on by selecting it and clicking on icon. the 34/56 Revision 2.3 July 2013 Medio L40 - User's Guide 3. Click on the radio to upgrade and in the drop down menu, choose “Upgrade Radio Firmware…” Alternatively, you may as also right-click the radio and choose “Upgrade Radio Firmware…” 4. In the “Firmware Upgrade” dialog, select the firmware file, enter its associated passphrase if necessary and click “Upgrade”. Figure 17: Radio firmware upgrade 6. Once the upgrade is completed, click “Reboot” to reboot the device immediately. If you need to upgrade another set of firmware of the device first, click “Don’t Reboot”. Figure 18: Radio firmware upgrade completed July 2013 2.3 35/56 Medio L40 - User's Guide 5 Advanced Notions 5.1 Reader Architecture Figure 19: Medio L40 Architecture Channel 1 USB Device RF Front End Channel 2 Radio Microsystem RS-232 10/100 Ethernet Power Supply IO Front End 2 GPIO Channel 4 Multiplexer 24VDC 50W Channel 3 Figure 19 above shows the Medio L40 functional blocks: The Multiplexer is an analog subsystem responsible for dispatching the RF signal to the selected channel. It is controlled by the Radio Subsystem. The RF Front End is an analog subsystem responsible for generating and modulating the RF field for uplink communication to the tags. It also demodulates signal from tags for downlink communication and provide monitoring information such as operating temperature and antenna tuning status. It is controlled by the Radio Subsystem. The Radio Subsystem is responsible for managing the RF and IO Front Ends, encoding and decoding signals to/from tags, filtering tag data (for example removing duplicate reads) and providing RFID-related primitives to the Microsystem (like “Activate channel 1”, “Set output power to 1 Watt”, “Read UID from ISO15693 tag”, …). It is DSP based and is controlled by the Microsystem. The IO Front End is responsible for providing 2 protected digital inputs or 2 protected digital outputs. It is controlled by the Microsystem and can be used as general purpose IOs directly accessed by the host system, or to automatically trigger readings and signal reading activity (by light stacks for example) without intervention from the host system. The Microsystem is responsible for interfacing the Radio Subsystem to the host system through various physical interfaces (USB, RS-232, 10/100 Ethernet) and protocols (TAGSYS StxNG protocol, standalone mode, telnet server, serial console and heartbeat). 36/56 Revision 2.3 July 2013 Medio L40 - User's Guide 5.2 Reader to Host Protocols 5.2.1 TAGSYS StxNG TAGSYS StxNG is the protocol used by the Medio L40 reader to communicate with the host system. Upon start up, the Medio L40 reader starts listening for incoming frames over all of its interfaces: USB (seen as a virtual COM port from the host side) RS-232 Primary and Secondary TCP ports (default ports are ports 4000 and 4001. Only one connection per port is accepted). After a valid frame is received from one of the interfaces, the corresponding command is executed and a reply is sent back to the host. Below is a short description of the “command” and “response” frame format. Host to reader frame (command):Reader to host frame (response): Field Description Start Of Frame (01h) When RS422 or RS485 communication modes are supported, only the reader whose StxNG address matches this field executes the command and replies. This field is ignored by Medio L40. In a command frame, the ID of the command that should be executed. Command IDs are in the range 0000h-7FFFh In a response frame, the error code if an error occurred during execution. Error codes are in the range 8000h-FFFFh. If no error occurred, the command ID is repeated. The Data field length in number of bytes. In a command frame, the parameters for the command. In a response frame, the return values associated to the command. A checksum. This is the arithmetic sum off all previous bytes. The reader is never allowed to send data over its interfaces without having received a command from the host. A simple password-based security mechanism can be activated to prevent unauthorized access to the reader. In such a case, the host system must first execute a specific command to identify itself before being allowed to send any other command. For more information about StxNG protocol and a complete command set description, please refer to Medio L400/L40 Designer’s guide. 5.2.2 Heartbeat The heartbeat service applies to the 10/100 Ethernet interface only. When activated, the heartbeat service periodically broadcasts Ethernet packets containing product name, description, location, IP address and TCP ports on which reader is listening for incoming connections (see StxNG protocol). July 2013 2.3 37/56 Medio L40 - User's Guide This heartbeat is useful to: • Show Medio L40 readers connected to the same physical network as the host. • Check that a Medio L40 reader is operating properly (in this case, the heartbeat acts as a watchdog). For more information about heartbeat please refer to Medio L400/L40 Designer’s guide. 5.2.3 Telnet The telnet server applies to 10/100 Ethernet interface only. A host can connect to the reader using any standard telnet client. The Telnet server makes it possible to configure the microsystem only (serial port configuration, TCP/IP stack configuration, date/time configuration, version query…). RFID configuration and control (for example activating a channel and reading a tag) is not allowed with telnet server. A simple password-based security mechanism can be activated to prevent unauthorized access to the reader. The date/time configuration is not battery-backed on the Medio L40. For more information about telnet server please refer to Medio L400/L40 Designer’s guide. 5.2.4 Serial console The serial console applies to RS-232 and USB interfaces only. A host can connect to the reader using any standard terminal application. The serial console makes it possible to configure the microsystem only (serial port configuration, TCP/IP stack configuration, date/time configuration, version query…). RFID configuration and control (for example activating a channel and reading a tag) is not allowed with serial console. A simple password-based security mechanism can be activated to prevent unauthorized access to the reader. The date/time configuration is not battery-backed on the Medio L40. The reader automatically detects if current data exchanges over its serial and USB ports are StxNG protocol frames or console frames and reacts accordingly. Consequently, there’s no need 38/56 Revision 2.3 July 2013 Medio L40 - User's Guide to configure those interfaces for console or StxNG protocol operation: both are simultaneously available. For more information about serial console please refer to Medio L400/L40 Designer’s guide. 5.2.5 Standalone mode Standalone mode makes it possible to use the reader without the need for a host to control it. In this case, only the tag reading operation is available. When standalone mode is activated, the reader automatically loads its last saved configuration upon start-up and initiates a read session. Each time a read event occurs, the reader sends a frame over both its serial and USB ports. Frame format is as the following (all fields are ASCII, optional and customizable):
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 56 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 Producer : Bullzip PDF Printer / www.bullzip.com / Freeware Edition Modify Date : 2013:07:26 16:36:59+02:00 Create Date : 2013:07:26 16:36:59+02:00 Creator Tool : UnknownApplication About : 53c45b0e-f85c-11e2-0000-cca7dcc4179..-z.2013-07-26T16:36:59+02:00 Document ID : uuid:53c45b0e-f85c-11e2-0000-cca7dcc4179+.�c.. Format : application/pdf Title : Untitled Creator : bmajoure Author : bmajoureEXIF Metadata provided by EXIF.tools