Tait TEL0061 Paging Transmitter User Manual T859 A4 pages

Tait Limited Paging Transmitter T859 A4 pages

PowerAmp Specification

D1.14T858/859 General InformationM850-0029/02/00 Copyright TEL1.3 Specifications1.3.1 IntroductionThe performance figures given are minimum figures, unless otherwise indicated, forequipment operating at standard room temperature (+22°C to +28°C) and standard testvoltage (13.8V DC).Ambient temperature is defined as the temperature of the air at the input to the coolingfan mounted on the heatsink, or immediately surrounding the heatsink if a fan is not fit-ted.Where applicable, the test methods used to obtain the following performance figuresare those described in the ETS specification. Refer to Section 1.3.3 for details of teststandards. Details of test methods and the conditions which apply for Type Approval testing in allcountries can be obtained from Tait Electronics Ltd.1.3.2 GeneralPower Output: T858 - Rated Power .. 50W - Range Of Adjustment .. 10 to 60W (typical)T859 - Rated Power .. 100W - Range Of Adjustment .. 20 to 110W (typical) Input Power .. 700 to 1300mWDuty Cycle Rating:T858 .. 50W continuous to +60°C ambienttemperature.. 60W continuous to +40°C ambienttemperatureT859 .. 100W continuous to +60°C ambienttemperatureIntermodulation .. -70dBc or -40dBi1 with 25dB isolation(PA with output isolator) & interfering signal of -30dBcMismatch Capability: Ruggedness .. refer to your nearest Tait Dealer orCustomer Service OrganisationStability .. 5:1 VSWR (all phase angles)1. dBi denotes the level of intermodulation product relative to the interfering signal.
M850-00T858/859 General InformationD1.15Copyright TEL 29/02/00Supply Voltage: Operating Voltage .. 10.8 to 16V DC Standard Test Voltage .. 13.8V DC Polarity .. negative earth only Polarity Protection .. crowbar diodeMaximum Supply Current (T858 @ 50W, T859 @ 100W): Standby .. 50mA Transmit - T858 without power module .. 11A- T858 with power module .. 12A (11A typical)- T859 without power module .. 22A- T859 with power module .. 23A (21A typical)Spurious Emissions: Conducted - Transmit .. -36dBm to 1GHz -30dBm 1GHz to 4GHz - Standby .. -57dBm to 1GHz -47dBm 1GHz to 4GHzRadiated - Transmit .. -36dBm to 1GHz -30dBm 1GHz to 4GHz - Standby .. -57dBm to 1GHz -47dBm 1GHz to 4GHzOperating Temperature Range .. -30°C to +60°C ambient temperatureDimensions: Height .. 183mm Width - T858 .. 60mm - T859 .. 120mmLength .. 340mmWeight: T858 .. 3.1kg T859 .. 3.5kg1.3.3 Test StandardsWhere applicable, this equipment is tested in accordance with the following standards.1.3.3.1 European Telecommunication StandardETS 300 086 January 1991Radio equipment and systems; land mobile service; technical characteristics and testconditions for radio equipment with an internal or external RF connector intended pri-marily for analogue speech.
D1.16T858/859 General InformationM850-0029/02/00 Copyright TELETS 300 113 March 1996Radio equipment and systems; land mobile service; technical characteristics and testconditions for radio equipment intended for the transmission of data (and speech) andhaving an antenna connector.ETS 300 219 October 1993Radio equipment and systems; land mobile service; technical characteristics and testconditions for radio equipment transmitting signals to initiate a specific response in thereceiver.ETS 300 279 February 1996Radio equipment and systems; electromagnetic compatibility (EMC) standard for pri-vate land mobile radio (PMR) and ancillary equipment (speech and/or non-speech).1.3.3.2 DTI CEPT Recommendation T/R-24-01Annex I: 1988Technical characteristics and test conditions for radio equipment in the land mobileservice intended primarily for analogue speech.Annex II: 1988Technical characteristics of radio equipment in the land mobile service with regard toquality and stability of transmission.1.3.3.3 Telecommunications Industry AssociationANSI/TIA/EIA-603-1992Land mobile FM or PM communications equipment measurement and performancestandards.

Navigation menu