Tait TEL0061 Paging Transmitter User Manual T859 A4 pages

Download:
Mirror Download [FCC.gov]
Document ID	269946
Application ID	qFAf+vY4gC4kwb6bEi8/CQ==
Document Description	PowerAmp Specification
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	4.79kB (59839 bits)
Date Submitted	2002-09-12 00:00:00
Date Available	2002-11-07 00:00:00
Creation Date	0000-00-00 00:00:00
Producing Software	Acrobat Distiller 3.0 for Windows
Document Lastmod	0000-00-00 00:00:00
Document Title	T859 A4 pages.pdf

D1.14
T858/859 General Information
1.3
Specifications
1.3.1
Introduction
M850-00
The performance figures given are minimum figures, unless otherwise indicated, for
equipment operating at standard room temperature (+22°C to +28°C) and standard test
voltage (13.8V DC).
Ambient temperature is defined as the temperature of the air at the input to the cooling
fan mounted on the heatsink, or immediately surrounding the heatsink if a fan is not fitted.
Where applicable, the test methods used to obtain the following performance figures
are those described in the ETS specification. Refer to Section 1.3.3 for details of test
standards.
Details of test methods and the conditions which apply for Type Approval testing in all
countries can be obtained from Tait Electronics Ltd.
1.3.2
General
Power Output:
T858
- Rated Power
- Range Of Adjustment
.. 50W
.. 10 to 60W (typical)
T859
- Rated Power
- Range Of Adjustment
.. 100W
.. 20 to 110W (typical)
Input Power
.. 700 to 1300mW
Duty Cycle Rating:
T858
T859
Intermodulation
(PA with output isolator)
.. 50W continuous to +60°C ambient
temperature
.. 60W continuous to +40°C ambient
temperature
.. 100W continuous to +60°C ambient
temperature
.. -70dBc or -40dBi1 with 25dB isolation
& interfering signal of -30dBc
Mismatch Capability:
Ruggedness
Stability
.. refer to your nearest Tait Dealer or
Customer Service Organisation
.. 5:1 VSWR (all phase angles)
1. dBi denotes the level of intermodulation product relative to the interfering signal.
29/02/00
Copyright TEL
T858/859 General Information
M850-00
D1.15
Supply Voltage:
Operating Voltage
Standard Test Voltage
Polarity
Polarity Protection
..
..
..
..
10.8 to 16V DC
13.8V DC
negative earth only
crowbar diode
Maximum Supply Current (T858 @ 50W, T859 @ 100W):
Standby
Transmit - T858 without power module
- T858 with power module
- T859 without power module
- T859 with power module
..
..
..
..
..
50mA
11A
12A (11A typical)
22A
23A (21A typical)
Spurious Emissions:
Conducted
- Transmit
- Standby
Radiated
- Transmit
- Standby
Operating Temperature Range
.. -36dBm to 1GHz
-30dBm 1GHz to 4GHz
.. -57dBm to 1GHz
-47dBm 1GHz to 4GHz
.. -36dBm to 1GHz
-30dBm 1GHz to 4GHz
.. -57dBm to 1GHz
-47dBm 1GHz to 4GHz
.. -30°C to +60°C ambient temperature
Dimensions:
Height
Width
- T858
- T859
Length
..
..
..
..
183mm
60mm
120mm
340mm
Weight:
T858
T859
1.3.3
.. 3.1kg
.. 3.5kg
Test Standards
Where applicable, this equipment is tested in accordance with the following standards.
1.3.3.1
European Telecommunication Standard
ETS 300 086 January 1991
Radio equipment and systems; land mobile service; technical characteristics and test
conditions for radio equipment with an internal or external RF connector intended primarily for analogue speech.
Copyright TEL
29/02/00
D1.16
T858/859 General Information
M850-00
ETS 300 113 March 1996
Radio equipment and systems; land mobile service; technical characteristics and test
conditions for radio equipment intended for the transmission of data (and speech) and
having an antenna connector.
ETS 300 219 October 1993
Radio equipment and systems; land mobile service; technical characteristics and test
conditions for radio equipment transmitting signals to initiate a specific response in the
receiver.
ETS 300 279 February 1996
Radio equipment and systems; electromagnetic compatibility (EMC) standard for private land mobile radio (PMR) and ancillary equipment (speech and/or non-speech).
1.3.3.2
DTI CEPT Recommendation T/R-24-01
Annex I: 1988
Technical characteristics and test conditions for radio equipment in the land mobile
service intended primarily for analogue speech.
Annex II: 1988
Technical characteristics of radio equipment in the land mobile service with regard to
quality and stability of transmission.
1.3.3.3
Telecommunications Industry Association
ANSI/TIA/EIA-603-1992
Land mobile FM or PM communications equipment measurement and performance
standards.
29/02/00
Copyright TEL

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 3
Create Date                     : 1910:20:82 60:92:34
Producer                        : Acrobat Distiller 3.0 for Windows
Title                           : T859 A4 pages.pdf

EXIF Metadata provided by EXIF.tools