Technicolor Delivery Technologies Belgium TG790 Home Service Gateway User Manual
Technicolor Delivery Technologies Belgium Home Service Gateway
Contents
- 1. User Manual (Operation)
- 2. User Manual (Statement)
User Manual (Operation)
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1562071 |
| Application ID | wgwX3AK3jFFHAK/d7yjNJg== |
| Document Description | User Manual (Operation) |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 340.34kB (4254305 bits) |
| Date Submitted | 2011-10-18 00:00:00 |
| Date Available | 2012-01-01 00:00:00 |
| Creation Date | 2011-10-17 17:05:57 |
| Producing Software | Acrobat Distiller 7.0 (Windows) |
| Document Lastmod | 2011-10-17 17:10:21 |
| Document Title | untitled |
FT Verizon Home Service Gateway TG790 DR Setup and User Guide FT DR 1 Getting Started ........................................................... 1 1.1 1.2 Check the Box Contents............................................................................................................... 3 Getting to Know the HSG ............................................................................................................ 4 1.2.1 1.2.2 Front Panel ............................................................................................................................................ 5 Back Panel.............................................................................................................................................. 7 2.1 2.2 2.3 FT Setup............................................................................ 9 Connect the HSG to the Cantenna.........................................................................................11 Power on the HSG ........................................................................................................................12 Connect Your Network Devices ..............................................................................................13 2.3.1 2.3.2 DR Wireless Connection to the HSG..................................................................................................14 Wired Connection to the HSG ......................................................................................................18 Graphical User Interface (GUI)................................. 19 3.1 Main...................................................................................................................................................22 3.1.1 3.1.2 3.1.3 My Router ............................................................................................................................................23 My Network .........................................................................................................................................26 Action Zone.........................................................................................................................................28 GUI: Wireless Settings .............................................. 29 4.1 4.2 4.3 Wireless Status ..............................................................................................................................30 Basic Security Settings................................................................................................................32 Advanced Security Settings......................................................................................................35 4.3.1 4.3.2 4.3.3 4.3.4 4.3.5 Securing Your Wireless Connection ...........................................................................................36 SSID Broadcast ...................................................................................................................................37 Wireless MAC Authentication.......................................................................................................38 802.11b/g/n Mode............................................................................................................................39 Other Advanced Wireless Options..............................................................................................40 5 GUI: My Network....................................................... 41 5.1 5.2 Network Status..............................................................................................................................42 Network Connections.................................................................................................................43 Ethernet Properties...........................................................................................................................44 Wireless Access Point Properties .................................................................................................45 Coax Connection ...............................................................................................................................46 Broadband Connection (Ethernet) .............................................................................................48 Broadband Connection (Coax).....................................................................................................50 FT 5.2.1 5.2.2 5.2.3 5.2.4 5.2.5 GUI: Firewall Settings ............................................... 53 DR GUI: Parental Control ............................................... 55 7.1 7.2 Parental Control............................................................................................................................56 Rule Summary ...............................................................................................................................58 7.2.1 Parental Control Log ........................................................................................................................59 GUI: Advanced Settings ........................................... 61 8.1 8.2 8.3 8.4 8.5 8.6 8.7 8.8 8.9 8.10 Diagnostics .....................................................................................................................................64 Restore Defaults............................................................................................................................66 Reboot Gateway ...........................................................................................................................67 ARP Table ........................................................................................................................................68 Users..................................................................................................................................................69 DNS Server ......................................................................................................................................70 System Settings.............................................................................................................................72 Port Configuration .......................................................................................................................73 Date and Time ...............................................................................................................................74 IP Address Distribution...............................................................................................................75 9 GUI: System Monitoring........................................... 77 Router Status..................................................................................................................................79 Advanced Status...........................................................................................................................80 9.2.1 9.2.2 9.2.3 9.2.4 9.2.5 10 System Logging .................................................................................................................................81 Full Status/System wide Monitoring of Connections ..........................................................82 Traffic Monitoring .............................................................................................................................83 Bandwidth Monitoring....................................................................................................................84 IGMP Proxy ..........................................................................................................................................85 FT 9.1 9.2 Support...................................................................... 87 General Troubleshooting ..........................................................................................................89 Troubleshooting Your Wireless Connection ......................................................................91 Resetting your HSG......................................................................................................................93 Configuring Dynamic IP Addressing on Windows...........................................................95 DR 10.1 10.2 10.3 10.4 FT DR FT DR Getting Started 1 Getting Started Introduction This Setup and User Guide will help you to setup your Home Service Gateway (HSG) and deploy its services on your home network. Your Home Network Your home network consists of the following components: One Cantenna One Home Service Gateway (HSG) The Cantenna FT One or more network devices The Cantenna is located on the roof and is the interface between your home network and the Verizon 4G LTE network. The Cantenna controls the following network devices: DTV Set Top Boxes Port Forwarding Application Layer Gateway (ALG) DR The HSG The Home Service Gateway is located in your home and is responsible for: Managing the communication between your network devices (computers, wireless devices). Acting as an interface between your home devices and the Cantenna (hence the Verizon 4G LTE network) DMS-CTC-20110909-0007 v0.1 1 Getting Started 1.1 Check the Box Contents Your box should contain the following items: FT 71/2 inch | 190mm 1/4 inch | 6mm ± 1/3 inch | max 8,9mm Description This Quick Installation Guide The Safety and Regulatory Notices DR Item The Wall Mount Instructions The Home Service Gateway. In this Setup and User Guide we will refer to it as HSG. One power supply One yellow Ethernet cable (RJ-45) When one of these items is missing call 800- 837-4966. Read Safety Instruction Please read “Safety Instructions and Regulatory Notices” before you start with the installation of the HSG. DMS-CTC-20110909-0007 v0.1 1 Getting Started 1.2 Getting to Know the HSG This section introduces you to the different components of the HSG. Page “1.2.1 Front Panel” “1.2.2 Back Panel” DR FT Topic DMS-CTC-20110909-0007 v0.1 1 Getting Started 1.2.1 Front Panel Components WPS button FT Status LEDs DR On the front panel of your HSG, you can find: The Status LEDs: These Status LEDs allow you to check the state of the services offered by the HSG. WPS button: The WPS button allows you to add new wireless clients to your local network in a swift and easy way, without the need to enter any of your wireless settings (network name, wireless key, encryption type). Status LEDs On the front panel of your HSG, you can find the following items: LED Description Power Indicates the power status of the HSG. Internet Indicates the connectivity to the Cantenna. Phone [1-2] Indicates the connectivity to the phone connected to the HSG. Wireless Indicates whether wireless is enabled on your HSG. USB Indicates the connectivity of the connected USB devices. Ethernet Indicates the connectivity to the connected Ethernet devices. DMS-CTC-20110909-0007 v0.1 1 Getting Started Description WiFi Indicates the connectivity to the Cantenna. DR FT LED DMS-CTC-20110909-0007 v0.1 1 Getting Started Back Panel FT 1.2.2 Item Name Description USB port Power switch Allows you to switch your HSG on/off. Power inlet This is where you will plug in the power adapter. Reset button If you press this button for 5 seconds the HSG will return to its factory default settings. All changes that you made to the default configuration will be lost. LAN port Allows you to connect your local devices (e.g. a computer) using Gigabit Ethernet. WAN port Allows you to connect your HSG to the Cantenna. Phone port Allows you to connect your telephone to the Verizon telephone network. DR Allow you to power or charge your USB devices. DMS-CTC-20110909-0007 v0.1 DR FT 1 Getting Started DMS-CTC-20110909-0007 v0.1 FT DR Setup 2 Setup Overview To setup your HSG, you have to complete the following steps: 1 If a different router was being used previously, disconnect it. Remove all components, including power supplies and cables; they will not work with the HSG. 2 Connect the HSG to the Cantenna. For more information, see “2.1 Connect the HSG to the Cantenna” on page 11. 3 Power on your HSG. For more information, see “2.2 Power on the HSG” on page 12. FT 4 Connect your network devices. For more information, see “2.3 Connect Your Network Devices” on page 13. 5 Optionally, you can further configure the HSG to your needs (for example, change the wireless security) using the Graphical User Interface (GUI) of the HSG. For more information, see In case of problems If you have trouble configuring your HSG, try the following: 1 Refer to “Support” on page 87. DR 2 If you did not find a solution in the Troubleshooting section, call the Help Desk at 800- 837-4966. 10 DMS-CTC-20110909-0007 v0.1 2 Setup 2.1 Connect the HSG to the Cantenna Procedure WAN HSG FT Cantenna Coax cable 1 Take one end of the coaxial cable and connect into the coaxial wall jack. 2 Connect the other end to the Coax port of your HSG. DR 3 After a few minutes, the WAN Coax LED must be solid green. If this is not the case, make sure that the coaxial cable is connected properly at both ends. DMS-CTC-20110909-0007 v0.1 11 2 Setup 2.2 Power on the HSG Procedure On Power FT Off 1 Take the power supply that is included in your box. 2 Connect the power cord to the Power port of your HSG. 3 Plug the other end into an electrical outlet. 4 Push the On/Off button to turn on the HSG. DR 5 Wait a few minutes to allow the HSG to complete the start up phase. 6 The Power LED on the front panel of your HSG must be solid green. 12 DMS-CTC-20110909-0007 v0.1 2 Setup 2.3 Connect Your Network Devices Introduction This section helps you to connect your network devices (for example, a computer, a network printer,...) to the HSG network. Connection options If you want to connect your computer to the HSG using: A wireless connection, proceed with “2.3.1 Wireless Connection to the HSG” on page 14. DR on page 18. FT A wired (Ethernet) connection, proceed with “2.3.2 Wired Connection to the HSG” DMS-CTC-20110909-0007 v0.1 13 2 Setup 2.3.1 Wireless Connection to the HSG Requirements Your network device must be equipped with a WiFi-certified wireless client. Your network device must be configured to obtain an IP address automatically. This is the default setting. Procedure FT If you want to connect a computer using the wireless network, configure the wireless client on your computer with the wireless settings printed on the label of your HSG. DR ESSID: ************** WPA key: ************** To configure these settings on: Windows 7, proceed with “Connect your computer on Windows 7” on page 15. Windows Vista, proceed with “Connect your computer on Windows Vista” on page 15. Windows XP, proceed with “Connect your computer on Windows XP” on page 16. Mac OS X, proceed with“Connect your computer on Mac OS X” on page 17. On another operating system, consult the help of your wireless client or operating system. 14 DMS-CTC-20110909-0007 v0.1 2 Setup Connect your computer on Windows 7 Proceed as follows: 1 Click the wireless network icon ( )in the notification area. FT 2 A list of available wireless networks appears. Double-click the HSG access point. Note The HSG is listed with the network name (ESSID) that is printed on the bottom of your HSG (for example: TTTG7). DR 3 Windows prompts you to enter the network security key. Type the WPA key that is printed on the bottom of your HSG in the Network key and Confirm network key box and click Connect. Connect your computer on Windows Vista Proceed as follows: 1 Click Start and click Connect To. 2 A list of available wireless networks appears. 3 Double-click the HSG access point. Note The HSG is listed with the network name (ESSID) that is printed on the bottom of your HSG (for example: TTTG7). DMS-CTC-20110909-0007 v0.1 15 2 Setup 4 Windows prompts you to enter the network security key. Type the WPA key that is printed on the bottom of your HSG in the Network key and Confirm network key box and click Connect. Proceed as follows: FT Connect your computer on Windows XP 1 Right-click the wireless network connection icon ( or and then click View Available Wireless Networks. )in the notification area DR 2 A list of available wireless networks appears. Double-click the HSG access point. The HSG is listed with the network name (ESSID) that is printed on the bottom of your HSG (for example: TTTG7). Note If the HSG is not in the list, see “Windows can not find the HSG access point” on page 91. 3 Windows prompts you to enter the network security key. Type the WPA key that is printed on the bottom of your HSG in the Network key and Confirm network key box and click Connect. 16 DMS-CTC-20110909-0007 v0.1 2 Setup FT 4 You are now connected to the HSG: Connect your computer on Mac OS X Proceed as follows: 1 Click the Airport icon on the menu bar. DR 2 A list of available wireless networks appears. Select the HSG from the list. Note The HSG is listed with the network name (ESSID) that is printed on the bottom of your HSG (for example: TTTG7). 3 The AirPort window prompts you to enter your WPA password. Type the WPA key that is printed on the bottom of your HSG in the Password box, select the Remember is network box and click OK. 4 You are now connected to the HSG network. DMS-CTC-20110909-0007 v0.1 17 2 Setup 2.3.2 Wired Connection to the HSG Requirements Both your network device (for example, a computer, an Ethernet switch,...) and HSG must have a free Ethernet port. Your network device must be configured to obtain an IP address automatically. This is the default setting. For more information, see “10.4 Configuring Dynamic IP Addressing on Windows” on page 95. FT Procedure HSG DR Computer Yellow Ethernet Cable Proceed as follows: 1 Take the yellow Ethernet cable that was included in your box. 2 Plug the Ethernet cable into one of the four yellow Ethernet ports on the back of the HSG. 3 Plug the other end of the yellow Ethernet cable into an Ethernet port on the computer. 4 If you did not yet start up your computer, start up your computer. 5 The Ethernet LED on the front panel of your HSG should light up (solid or blinking). 6 Use the same procedure to connect your other Ethernet devices (computers, network printers,...). 18 DMS-CTC-20110909-0007 v0.1 FT DR Graphical User Interface (GUI) 3 Graphical User Interface (GUI) Introduction The Graphical User Interface (GIU) allows you to configure your HSG from your web browser. Requirements JavaScript must be enabled on your browser (this is the default setting). For more information, consult the help of your web browser. Accessing the GUI Proceed as follows: FT 1 Open your web browser. 2 In the Address box, type http://sgw.lan (or http://192.168.1.254) and press ENTER. 3 The HSG prompts you to enter your user name and password. Enter your user name and password and click OK. Note If you did not yet change the password, type admin in the User Name box and type the Login password printed on the bottom label of your HSG in the Password box. DR 4 The HSG GUI appears. 20 DMS-CTC-20110909-0007 v0.1 3 Graphical User Interface (GUI) Menu The menu bar on the front contains the following items: For more information, see... Main “3.1 Main” on page 22. Wireless Settings “4 GUI: Wireless Settings” on page 29. My Network “5 GUI: My Network” on page 41. FT Name Firewall Settings “6 GUI: Firewall Settings” on page 53. Parental Control “7 GUI: Parental Control” on page 55. Advanced “8 GUI: Advanced Settings” on page 61. DR Icon System Monitoring DMS-CTC-20110909-0007 v0.1 “10 Support” on page 87. 21 3 Graphical User Interface (GUI) 3.1 Main Main page The Main page provides a summary view of the main services of the HSG. The content of the page is divided into three groups: My Router For more information, see “3.1.1 My Router ” on page 23. My Network For more information, see “3.1.2 My Network” on page 26. Action Zone DR FT For more information, see “3.1.3 Action Zone” on page 28. 22 DMS-CTC-20110909-0007 v0.1 3 Graphical User Interface (GUI) 3.1.1 My Router Introduction The My Router pane displays the status of the HSG’s network and Internet connection and contains the following items: Router Status Broadband Connection DR Router Status FT Quick Links The Router Status informs you about the status of your Internet connection: Icon Description Indicates that the HSG is connected to the Internet. Indicates that the HSG is not connected to the Internet. Broadband Connection Under Broadband Connection, you can view: Ethernet Status or Coax Status. The IP address and connection type of your broadband connection (if you are connected to the Internet). DMS-CTC-20110909-0007 v0.1 23 3 Graphical User Interface (GUI) To view more information about your broadband connection: 1 Under Broadband Connection, click the Disconnected or Connected link: 2 Depending on whether you choose Ethernet or Coax for your WAN connection, one of the following pages appears: DR FT The Broadband Connection (Ethernet) Properties page For more information, see “5.2.5 Broadband Connection (Coax)” on page 50. The Broadband Connection (Ethernet) Properties page For more information, see “5.2.4 Broadband Connection (Ethernet)” on page 48. 24 DMS-CTC-20110909-0007 v0.1 3 Graphical User Interface (GUI) Quick Links The Quick Links section provides links to frequently used pages. The following quick links are available: Port Forwarding Click this link to assign a service (for example a HTTP server) to a network device. Request for this service that are initiated from the Internet will automatically be forwarded to this device. Change Wireless Settings Click this link to configure the wireless access point of your HSG. For more information, see “GUI: Wireless Settings” on page 29. Change Login User Name/Password Adding a Webcam FT Click this link to change your login information. For more information, see “8.5 Users” on page 69. Click this link to view the instructions for connecting a webcam to your network. Verizon Help Click this link to view the online help of your HSG. Logout: DR Click this link to quit your session. You will need to re-enter your user name and password to return to the GUI. DMS-CTC-20110909-0007 v0.1 25 3 Graphical User Interface (GUI) 3.1.2 My Network Introduction The My Network pane, provides you an overview of the devices that are currently connected to the HSG. The following information is provided for each device: PC Name: Displays the name that will be used to reference to this device. FT Connection Type: Displays how the device is connected to the HSG (Ethernet, Wireless or Coax). IP Address: Displays the IP address of the device. Status: Displays whether the device is currently connected or not. DR Viewing detailed device information To view the complete device information: 1 Click the icon next to the device. 2 The Device Information page appears and displays detailed information about the device: 3 Click: The Network Connection link to view more information on the network interface that this device is using. 26 DMS-CTC-20110909-0007 v0.1 3 Graphical User Interface (GUI) Windows Shared Folders link to view the shared folders of this computer. Test Connectivity to check if the device is currently connected to the HSG. DR FT Close to return to the Main page. DMS-CTC-20110909-0007 v0.1 27 3 Graphical User Interface (GUI) 3.1.3 Action Zone Introduction The Action Zone pane allows you to access Click: See Security Hazard to check the security log. GO TO THE INTERNET NOW to browse to your home page. Verizon. com to access the Verizon corporate website. FT Verizon Central to browse the My Verizon portal Verizon Business Center The Business Center is a daily destination site aimed at helping companies improve productivity, stay informed, and expand their business connections Verizon Surround DR A cutting edge, broadband entertainment site featuring movie trailers, hot new tunes, cool games and fast-pace message boards. Stay up to date on the latest Hollywood happenings, special offers and more at Verizon Surround. MUSIC to browse to the music channel of Verizon Surround. VIDEO to browse to the music section of Verizon Surround. 28 DMS-CTC-20110909-0007 v0.1 FT DR GUI: Wireless Settings 4 GUI: Wireless Settings 4.1 Wireless Status Introduction The Wireless Status page provides you an overview of the wireless settings that are currently used by your HSG. FT Overview The following settings are available: DR Radio Enabled: Displays whether the HSG’s wireless radio is active. SSID: To be able to distinguish one wireless network from another, each wireless network has its own network name, often referred to as Service Set IDentifier (SSID). All your wireless devices on your network must use this network name. Channel: Displays the channel to which the wireless connection is currently set. When you select Automatic (default setting), the HSG automatically selects the best channel for your wireless communication. The actual channel will then be displayed between parentheses (for example, Automatic (6) indicates that channel 6 is selected) Security Enabled: Displays whether wireless security is enabled. If security is enabled, the HSG is using one of the following encryption types to secure your wireless connection: WEP 64-bit: The oldest and also most encryption type. We recommend to use WPA instead. Only use it if your wireless client does not support WPA. WPA+WPA2: This is a mixed mode. In this mode WPA2, is the preferred encryption type but wireless clients do not support WPA2, can still use WPA as encryption type. Choose this option if not all of your wireless clients support WPA2 or if you are not sure. Wireless clients that support WPA2 will use WPA2, the others will use WPA. 30 DMS-CTC-20110909-0007 v0.1 4 GUI: Wireless Settings WPA2 (default): The most recent and most secure version of WPA. Choose this version if you are sure that all your wireless clients support WPA2. WPA: The first version of WPA. Choose this option if you are sure that none of your wireless clients support WPA2. When you connect to the HSG, you have to enter the key that is listed next to the encryption type. SSID Broadcast: FT Displays whether the HSG is broadcasting its SSID. If activated, the SSID will appear in the list when a wireless client scans for available networks. For more information, see “4.3.2 SSID Broadcast” on page 37. MAC Authentication: If MAC authentication is enabled, only wireless clients that are included in the Access list are allowed to connect. For more information, see “4.3.3 Wireless MAC Authentication” on page 38. Wireless Mode: Displays the types of wireless device that can join the network. Options include: DR Compatibility Mode (802.11b/g/n) In this mode 802.11b, 802.11g and 802.11n can be used to connect to the HSG. Legacy Mode (802.11b/g) In this mode only 802.11b- and 802.11g connections can be used to connect to the HSG. 802.11n connections are not allowed Received Packets: The number of packets received and sent since the HSG’s wireless capability was activated. Sent Packets: Displays the number of packets received and sent since the HSG’s wireless capability was activated. DMS-CTC-20110909-0007 v0.1 31 4 GUI: Wireless Settings 4.2 Basic Security Settings Introduction The Basic Security Settings page allows you to configure the basic wireless settings of your HSG in a step-by-step approach. Overview of the steps This section describes: Step 1: Turn Wireless ON/OFF Step 3: Channel FT Step 2: Change the SSID setting to any name or code you want Step 4: Click on the button next to WEP Step 5: Select a WEP Key Step 6: Turn WPS ON Step 7: Write down wireless settings DR Step 1: Turn Wireless ON/OFF If you are not using your wireless connection, you might consider to turn it off. Make sure that nobody is using the wireless connection before turning it off. Step 2: Change the SSID setting to any name or code you want If you want to change the default network name of your wireless network, type the new network name in the SSID box. Step 3: Channel If you want to change the channel for your wireless communication, select a new channel in the Channel list. We recommend you to use Automatic (this is also the default). When Automatic is selected the HSG will choose the channel that has the least interference. Only change it if you experience wireless connectivity problems. 32 DMS-CTC-20110909-0007 v0.1 4 GUI: Wireless Settings Step 4: Click on the button next to WEP In this step you are able to use WEP encryption to secure your wireless connection. WEP has been proven to have some security issues. It is recommended to keep the Off option selected and use WPA(2) instead. For more information, see “4.3.1 Securing Your Wireless Connection” on page 36. The only reason why you might consider to use WEP is if you have older wireless devices in your network that only support WEP. FT Step 5: Select a WEP Key If you did choose to use WEP, this step allows you to choose the WEP key. 1 In the Select a WEP key list, select: DR 64/40 bit and Hex to enter a combination of 10 digits. You can choose any letter from A-F or any number from 0-9. For example: 0FB310FF28. 64/40 bit and ASCII to enter a combination of 5 ASCII characters. For example: hello. 128/104 bit and Hex to enter a combination of 26 digits. You can choose any letter from A-F or any number from 0-9. Sample HEX WEP Key: 0FB310FF280FB310FF28123456. 128/104 bit and ASCII to enter a combination of 13 ASCII characters. For example: sayhelloworld. 2 Enter the key of your choice in the Key Code box. 3 If needed, complete the other steps 4 Click Apply on the bottom of the page. Step 6: Turn WPS ON Wi-Fi Protected Setup (WPS) allows you to add new wireless clients to your local network in a swift and easy way, without the need to enter any of your wireless settings (network name, wireless key, encryption type). WPS can only be turned on if you are using WPA or WPA2 to encrypt your wireless connection. If WEP or no encryption is used, the selection will be unavailable. To turn WPS on/off: 1 Under WPS, select On/Off. DMS-CTC-20110909-0007 v0.1 33 4 GUI: Wireless Settings 2 If needed complete the other steps. 3 Click Apply. FT Step 7: Write down wireless settings This step gives you an overview of the settings that will be active as soon as you click the Apply button on the bottom of the page. You can print or write down this overview, to APPLY YOUR CHANGES DR Do not forget to click Apply on the bottom of your page to activate your changes. 34 DMS-CTC-20110909-0007 v0.1 4 GUI: Wireless Settings 4.3 Advanced Security Settings Introduction The Advanced Security Settings page allows you to take your wireless security to the next level. To improve the security of your wireless network you can add the following security levels: Level 1: Encrypt your wireless traffic with a wireless key to make sure that only FT the sender and the receiver can read the data that is sent over your wireless connection. For more information, see “4.3.1 Securing Your Wireless Connection” on page 36. Level 2: Disable the broadcasting of your wireless network name to hide your wireless network from other users. For more information, see “4.3.2 SSID Broadcast” on page 37. Level 3: Limit access to your wireless network for certain devices. Limit access based on the MAC address of the wireless device. For more information, see “4.3.3 Wireless MAC Authentication” on page 38. DR Limit access based on the wireless mode supported by the wireless device. For more information, see “4.3.4 802.11b/g/n Mode” on page 39. DMS-CTC-20110909-0007 v0.1 35 4 GUI: Wireless Settings 4.3.1 Securing Your Wireless Connection Encryption types The HSG supports the following encryption types: WEP: The least safe encryption type used for wireless connections. WEP has been proven to have security issues. Only use this encryption if your wireless device does not support WPA(2). WPA+WPA2: WPA2 (default): FT This is a mixed mode. In this mode WPA2, is the preferred encryption type but wireless clients do not support WPA2, can still use WPA as encryption type. Choose this option if not all of your wireless clients support WPA2 or if you are not sure. Wireless clients that support WPA2 will use WPA2, the others will use WPA. The most recent and most secure version of WPA. Choose this version if you are sure that all your wireless clients support WPA2. WPA: DR The first version of WPA. Choose this option if you are sure that none of your wireless clients support WPA2. None If you want to configure WPA2 on the built-in wireless utility of Windows XP Service Pack 2 (SP2), you first have to: Upgrade your Windows XP to Service Pack 3. - or - Install the following update: http://support.microsoft.com/kb/917021. Although the HSG allows you to use WEP or no security, we strongly advise against using on of them! We recommend you to use WPA2. Changing the encryption type 1 On the Wireless Settings menu, click Advanced Security Settings. 2 Under Level 1, select the encryption type of your choice. 3 Enter a the pre-shared key of your choice or use the default one. 4 Click Apply. 36 DMS-CTC-20110909-0007 v0.1 4 GUI: Wireless Settings 4.3.2 SSID Broadcast SSID To be able to distinguish one wireless network from another, each wireless network has its own network name, often referred to as Service Set IDentifier (SSID). All your wireless devices on your network must use this network name (and the correct encryption). Broadcast Note FT By default, the HSG broadcasts its wireless SSID. Wireless clients can then detect the presence of your network and inform the users that this network is available. Enabling SSID broadcast does not mean that everyone can connect to your network. They still need the correct wireless key to connect to the HSG network. It only informs them that your network is present. Disabling SSID Broadcast Proceed as follows: 1 On the Wireless Settings menu, click Advanced Security Settings. DR 2 Under Level 2, click SSID Broadcast. 3 The SSID Broadcast page appears: Click: Enable to allow wireless clients to see your wireless network. Disable to prevent wireless clients from seeing your wireless network. 4 Click Apply. DMS-CTC-20110909-0007 v0.1 37 4 GUI: Wireless Settings 4.3.3 Wireless MAC Authentication MAC Address A MAC (Media Access Control) address is a unique hexadecimal code that identifies a device on a network. Each network device has such a MAC address. MAC Authentication When using MAC authentication, you allow or deny devices to access to your network based on their MAC address. FT Warning: MAC authentication alone is not enough! Wireless MAC Authentication only offers a limited level of security. Hackers can easily detect a trusted MAC addresses and clone this trusted MAC address to their own computer, which will enables them to pass the MAC authentication filter. That’s why it is important that you first secure your wireless connection (preferably with a WPA encryption key). This way hackers won’t be able to interpret your wireless traffic. Enabling MAC DR Proceed as follows: 1 On the Wireless Settings menu, click Advanced Security Settings. 2 Under Level 3, click Wireless MAC Authentication. 3 Select Enable Access List. 4 Select: Accept all devices listed below if you want to block all devices by default. Deny all devices listed below if you want to allow all devices by default. 5 Now you can add exceptions to the default rule: enter the MAC addresses of the device in the Client MAC Address box and click Add. Repeat this step for each device. Note If you choose Accept all devices listed below and you are currently connected using a wireless connection, make sure to add the MAC address of your wireless client. If you do not do so, your will disconnected from the wireless network. 6 Click Apply. 38 DMS-CTC-20110909-0007 v0.1 4 GUI: Wireless Settings 4.3.4 802.11b/g/n Mode Introduction The 802.11b/g/n Mode page allows you to specify which wireless standards you want to support. Wireless standards The HSG is able to support the following wireless standards: 802.11n offers the highest speed (up to 130Mbps) and best range. 802.11g offers speeds up to 54Mbps. Procedure Proceed as follows: FT 802.11b offers speeds up to 11Mbps. 1 On the Wireless Settings menu, click Advanced Security Settings. 2 Under Level 3, click 802.11b/g/n Mode. DR 3 The 802.11 Mode page appears: In the 802.11 Mode list, select either of the following modes: Compatibility Mode (802.11b/g/n) In this mode 802.11b, 802.11g and 802.11n can be used to connect to the HSG. Legacy Mode (802.11b/g) In this mode only 802.11b- and 802.11g connections can be used to connect to the HSG. 802.11n connections are not allowed. 4 Click Apply. DMS-CTC-20110909-0007 v0.1 39 4 GUI: Wireless Settings 4.3.5 Other Advanced Wireless Options Warning Changing the Advanced Wireless Options may affect your router's wireless performance. Do not make any changes to these options unless you have been instructed to do so by Verizon support personnel. Accessing the Advanced Wireless Options page Proceed as follows: 1 On the Wireless Settings menu, click Advanced Security Settings. FT 2 Under Level 3, click Other Advanced Wireless Options. DR 3 The Advanced Wireless Options page appears. 40 DMS-CTC-20110909-0007 v0.1 FT DR GUI: My Network 5 GUI: My Network 5.1 Network Status Introduction Device Information FT The Network Status page provides you an overview of the devices that are currently connected to the HSG. The following information is provided for each device: PC Name: Displays the name that will be used to reference to this device. Connection Type: Displays how the device is connected to the HSG (Ethernet, Wireless or Coax). IP Address: DR Displays the IP address of the device. IP Address Allocation: Displays whether the device is using: A Dynamic IP address In this case the HSG assigns the first available address in the address pool. This also means that your may get a different IP address the next time you connect. A Static IP address In this case the device uses a dedicated IP address, you will always use the same IP address for your connection. You can assign a static IP address either on the HSG or your device. MAC Address: Displays the unique hardware address of the HSG. Connected Devices The Connected Devices pane on the right displays how many devices are connected to a specific interface on the HSG. 42 DMS-CTC-20110909-0007 v0.1 5 GUI: My Network 5.2 Network Connections Warning The settings covered in this section should be configured by experienced network technicians only! Introduction FT The Network Connections page allows you to configure the network connections of your HSG. DR Click or the name of the connection to edit or view the settings of the connection. DMS-CTC-20110909-0007 v0.1 43 5 GUI: My Network 5.2.1 Ethernet Properties Introduction FT The Ethernet Properties page allows you to view the properties of the Ethernet switch of your HSG. Accessing the Ethernet Properties page Proceed as follows: 1 On the My Network menu, click Network Connections. DR 2 The Network Connections table appears. Under Network (Home/Office), click Ethernet. Note If you do not see this item, click Advanced on the bottom of the page. 3 The Ethernet Properties page appears: 4 If you want to change the DHCP settings of your HSG, click IP Address Distribution. For more information, see “8.10 IP Address Distribution” on page 75. 44 DMS-CTC-20110909-0007 v0.1 5 GUI: My Network 5.2.2 Wireless Access Point Properties Introduction The Wireless Access Point Properties page allows you to: View the properties of the wireless access point of your HSG. View/ change the network name (SSID) of the wireless access point. Access Proceed as follows: FT 1 On the My Network menu, click Network Connections. 2 The Network Connections table appears. Under Network (Home/Office), click Wireless Access Point. Note If you do not see this item, click Advanced on the bottom of the page. DR 3 The Wireless Access Point Properties page appears: 4 If you want to: Turn off the wireless access point, click Disable in the upper-right corner. Change the network name (SSID), type the new name in the Name box and click Apply. DMS-CTC-20110909-0007 v0.1 45 5 GUI: My Network 5.2.3 Coax Connection Introduction A Coax connection connects devices (such as set-top boxes) to the HSG Router using a coaxial cable. The Coax Properties page allows you to view/change the settings of this connection. Accessing the Coax Properties page Proceed as follows: FT 1 On the My Network menu, click Network Connections. 2 The Network Connections table appears. Click Coax. DR 3 The Coax Properties page appears: Properties The following properties are available: Status: Displays the status of the coax connection. Network: Displays the type of network. Connection Type: Displays the type of connection. MAC Address: Displays the unique hardware address of this interface. IP Address Distribution: To change the value, click IP Address Distribution. For more information, see “8.10 IP Address Distribution” on page 75. Channel: The channel used by the coax connection. Controls Click: Settings to change the following advanced settings: 46 DMS-CTC-20110909-0007 v0.1 5 GUI: My Network Channel Allowable frequency Network Coordinator Mode Transmit Power Control Maximum Transmit Power Privacy Statistics to view the statistics of your Coax connection Node statistics to view the statistics of the devices that are using the Coax DR FT connection. DMS-CTC-20110909-0007 v0.1 47 5 GUI: My Network 5.2.4 Broadband Connection (Ethernet) Introduction The Broadband Ethernet connection connects the HSG Router to the Internet using an Ethernet cable. The Broadband Connection (Ethernet) Properties page allows you to view/ change the settings of this connection. Accessing the Broadband Connection (Ethernet) Properties page Proceed as follows: FT 1 On the My Network menu, click Network Connections. 2 The Network Connections table appears. Click Broadband Connection (Ethernet) Properties. DR 3 The Broadband Connection (Ethernet) Properties page appears. Properties The following properties are available: Status: Displays the status of the Ethernet connection (for example, “Down”, “Connected”). Network: Select the type of connection being configured from the drop-down list (options: Network [Home/Office], Broadband Connection, or DMZ). Connection Type: Displays the type of connection. Since this is an Ethernet Connection, “Ethernet” is displayed. Physical Address Displays the physical address of the network card used for the network. MAC Address: Displays the unique hardware address of this interface. IP Address: The local IP address of the HSG and its DHCP server. 48 DMS-CTC-20110909-0007 v0.1 5 GUI: My Network Subnet mask: The subnet mask is used in combination with the IP address to identify your network. Default Gateway: The server that is used to pass traffic outside the local network. DNS Server: The DNS servers used by the Broadband Connection (Ethernet). These servers will translate the DNS names (for example: www.google.com) into IP addresses (for example: 74.125.230.84). IP Address Distribution: Packets Received: FT To change the value, click IP Address Distribution. For more information, see “8.10 IP Address Distribution” on page 75. The number of packets that were received over the Broadband Connection (Ethernet) connection. Sent Packets: The number of packets that were sent over the Broadband Connection (Ethernet) connection. DR Time Span Changing the properties Clicking Settings allows you to change: The DHCP setting The DNS settings The routing table DMS-CTC-20110909-0007 v0.1 49 5 GUI: My Network 5.2.5 Broadband Connection (Coax) Introduction A Coax Broadband connection connects the HSG Router to the Internet using a coaxial cable. The Broadband Connection (Coax) Properties page allows you to view/change the settings of this connection. Accessing the Broadband Connection (Coax) Properties page Proceed as follows: FT 1 On the My Network menu, click Network Connections. 2 The Network Connections table appears. Click Broadband Connection (Coax) Properties. DR 3 The Broadband Connection (Coax) Properties page appears. Properties The following properties are available: Status: Displays the status of the coax connection. Network: Displays the type of network. Connection Type: Displays the type of connection. MAC Address: Displays the unique hardware address of this interface. IP Address Distribution: To change the value, click IP Address Distribution. For more information, see “8.10 IP Address Distribution” on page 75. Channel: The channel used by the coax connection. Changing the properties Clicking Settings allows you to change: 50 DMS-CTC-20110909-0007 v0.1 5 GUI: My Network The DHCP setting The DNS settings DR FT The routing table DMS-CTC-20110909-0007 v0.1 51 DR FT 5 GUI: My Network 52 DMS-CTC-20110909-0007 v0.1 FT DR GUI: Firewall Settings 6 GUI: Firewall Settings Introduction The firewall controls the flow of data between the local network and the Internet. Both incoming and outgoing data are inspected and then either accepted (allowed) or rejected (barred) from passing through according to a set of rules. To make sure that your entire network is protected the firewall is integrated in the Cantenna. Accessing the Cantenna Firewall pages via the HSG Proceed as follows: 1 On the top menu, click Firewall Settings. DR FT 2 The HSG directs you to the Cantenna firewall page. 54 DMS-CTC-20110909-0007 v0.1 FT DR GUI: Parental Control 7 GUI: Parental Control 7.1 Parental Control Introduction The Parental control page allows you to: Block a website: FT When the user tries to access the blocked page he will get the standard page announcing that this page has been blocked. For more information, see “Blocking a website” on page 56. Redirect a website to another website. DR When the user tries to access the blocked page he will be redirected to the page of your choice (for example: an intranet page explaining the intranet policy). For more information, see “Redirecting a website to another website” on page 57. Blocking a website Proceed as follows: 1 On the top menu, click Parental Control. 2 The Parental Control page appears. 56 DMS-CTC-20110909-0007 v0.1 7 GUI: Parental Control 3 Select Block the following website and enter the URL of the Website that you want to block in the Website box for example (www.evil.com). 4 Click Apply. Redirecting a website to another website Proceed as follows: FT 1 On the top menu, click Parental Control. DR 2 The Parental Control page appears. 3 Select Redirect the following website to another website. 4 Enter the URL of the website that you want to block in the Website box (for example: www.evil.com). 5 Enter the URL of the website that you want to redirect to in the Redirect to Website box (for example: www.company.com). 6 Click Apply. DMS-CTC-20110909-0007 v0.1 57 7 GUI: Parental Control 7.2 Rule Summary Introduction The Rule Summary page allows you to view or change the existing parental control rules. Changing a parental control rule Proceed as follows: 1 On the Parental Control menu, click Rule Summary. 3 Click: to edit a rule. The Parental Control page will then allow you to change the rule. DR FT 2 The Rule Summary page appears. For more information, see “7.1 Parental Control” on page 56. 58 to delete a rule. DMS-CTC-20110909-0007 v0.1 7 GUI: Parental Control 7.2.1 Parental Control Log Introduction The Parental Control Log page allows you to view when people tried to access the a blocked page. Accessing the Parental Control Log page Proceed as follows: 1 On the Parental Control menu, click Parental Control Log. DR FT 2 The Parental Control Log page appears. Under Details you can see the detailed information about the event. The most important items are: src: The IP address of the user that tried to access the website. url: The URL of the website that the user tried to access. 3 Optionally, click: Close to go to the Rule Summary page. Clear Log to remove all entries. Save Log to save the log entries to a text file. Refresh to update the list. DMS-CTC-20110909-0007 v0.1 59 DR FT 7 GUI: Parental Control 60 DMS-CTC-20110909-0007 v0.1 FT DR GUI: Advanced Settings 8 GUI: Advanced Settings Introduction The Advanced page allows you to configure the more advanced services of both the HSG and the Verizon. To access the Advanced, proceed as follow: 1 On the top menu, click Advanced. DR FT 2 The Advanced page appears. 3 On the bottom of this page, click: Cantenna Advanced Settings to configure the settings of the Cantenna. For more information about these settings, read the user documentation of your Cantenna. HSG Advanced Settings to configure the settings of the HSG. For more information about these settings, read the rest of this chapter. Utilities Click: Diagnostics to perform diagnostic tests on the HSG. For more information, see “8.1 Diagnostics” on page 64. Restore Defaults to reset the HSG to its default settings. For more information, see “8.2 Restore Defaults” on page 66. Reboot Router to restart the HSG For more information, see “8.3 Reboot Gateway” on page 67. ARP Table to display active devices and their IP and MAC addresses. For more information, see “8.4 ARP Table” on page 68. Users to create and manage users. For more information, see “8.5 Users” on page 69. DNS Server Click DNS Server to manage the local (LAN) network for host name and IP address. For more information, see “8.6 DNS Server” on page 70. 62 DMS-CTC-20110909-0007 v0.1 8 GUI: Advanced Settings Configuration Click: System Settings to change the system settings of the HSG. For more information, see “8.7 System Settings” on page 72. Port Configuration to configure the Ethernet LAN ports. For more information, see “8.8 Port Configuration” on page 73. Date and time FT Click Date and Time to configure the HSG clock and calendar of the HSG. For more information, see “8.9 Date and Time” on page 74. IP Address Distribution DR Click IP Address Distribution to manage the IP addresses of devices on the network. For more information, see “8.10 IP Address Distribution” on page 75. DMS-CTC-20110909-0007 v0.1 63 8 GUI: Advanced Settings 8.1 Diagnostics Introduction The Diagnostics page allows you to ping a device or website. Ping is used to test if a host (for example, a website, a computer) is reachable. Procedure To diagnose network connectivity: 1 On the top menu, click Advanced. 3 Under FT 2 The Advanced page appears. Click HSG Advanced Settings on the bottom of the page and then click Yes to confirm that you want to access the advanced settings. , click Diagnostics. DR 4 The Diagnostics page appears. In the Destination box, type one of the following: The DNS name (for example: www.google.com) or IP address (for example: 141.11.249.33) of a website. The DNS name (for example: Sascha-PC.lan) or IP address (for example: 192.168.1.3) of network device. 5 If needed change the number of pings in the Number of pings box. 6 Click Go. 7 The HSG is now pinging the destination. You can follow the progress in the Packets box. 8 At the end of the test the results appear. Under: Status you can see if the test was successful or not. Packets you can see the number packets that were received and how many percent that were lost. 64 DMS-CTC-20110909-0007 v0.1 8 GUI: Advanced Settings DR FT Round trip time, you can see the amount of time it took for the packet to get back to the HSG. DMS-CTC-20110909-0007 v0.1 65 8 GUI: Advanced Settings 8.2 Restore Defaults Introduction DR FT The Restore Defaults page allows you to return to the factory defaults of your HSG. For more information, see “10.3 Resetting your HSG” on page 93. 66 DMS-CTC-20110909-0007 v0.1 8 GUI: Advanced Settings 8.3 Reboot Gateway Introduction This Reboot Gateway page allows you to restart your HSG. WARNING During the reboot all services provided by the HSG will be unavailable. Procedure FT To reboot the HSG: 1 On the top menu, click Advanced. 2 The Advanced page appears. Click HSG Advanced Settings on the bottom of the page and then click Yes to confirm that you want to access the advanced settings. 3 Under , click Reboot Gateway. DR 4 The HSG prompts you to confirm the reboot. Click OK. 5 The HSG restarts. This may take up to two minutes. Note To access the HSG’s GUI after restarting the HSG, click the Refresh button of your web browser. DMS-CTC-20110909-0007 v0.1 67 8 GUI: Advanced Settings 8.4 ARP Table ARP The Address Resolution Protocol is a protocol that translates the IP address of a network device into its MAC address. The ARP table page The ARP Table page provides you a mapping between the IP address and the MAC address of the device that is using this IP address. Proceed as follows: FT Viewing the ARP table 1 On the top menu, click Advanced. 2 The Advanced page appears. Click HSG Advanced Settings on the bottom of the page and then click Yes to confirm that you want to access the advanced settings. 3 Under , click ARP Table. DR 4 The ARP Table page appears. The following fields are available: IP Address MAC Address Device Displays the network interface that the device is using. For more information, see “5.2 Network Connections” on page 43. 68 DMS-CTC-20110909-0007 v0.1 8 GUI: Advanced Settings 8.5 Users Introduction The Users page allows you to manage the user accounts for access to the HSG GUI. 1 On the top menu, click Advanced. 2 The Advanced page appears. Click HSG Advanced Settings on the bottom of the page and then click Yes to confirm that you want to access the advanced settings. 3 Under , click Users. DR 5 If you want to: FT 4 The Users page appears. Create a new user, click New User. Change the settings of an existing user, click the name of the user or Delete a user, click User Settings page When editing or creating a user account the User Settings page appears: The following fields are available: User Name The name a remote user will use to access the home or office network. This entry is case-sensitive. New Password/Retype New Password The password for the user (and enter again to confirm). Permissions The level of access the user is allowed. Options include: Administrator or User. Note You can not change the User Name and Permissions of the admin user. DMS-CTC-20110909-0007 v0.1 69 8 GUI: Advanced Settings 8.6 DNS Server Introduction The Domain Name System (DNS) translates domain names into IP addresses and vice versa. The HSG’s DNS server is an auto-learning DNS, which means that when a new computer is connected to the network, the DNS server learns its name and automatically adds it to the DNS table. Other network users can immediately communicate with this computer using either its name or its IP address. Services offered FT The following services are provided by the DNS server of the HSG: Shares a common database of domain names and IP addresses with the DHCP server. Supports multiple subnets within the local network simultaneously. Automatically appends a domain name to unqualified names. Allows new domain names to be added to the database using the HSG’s GUI. Permits a computer to have multiple host names. Permits a host name to have multiple IPs (needed if a host has multiple network DR cards). Configuration The DNS Server does not require configuration. However, the list of computers known by the DNS can be viewed or a new computer can be added to the list. Viewing DNS Table Proceed as follows: 1 On the top menu, click Advanced. 2 The Advanced page appears. Click HSG Advanced Settings on the bottom of the page and then click Yes to confirm that you want to access the advanced settings. 3 Under , click DNS Server. 4 The DNS Server page appears. Click: to add a new entry to the list. For more information, see “Adding a Add or DNS entry” on page 71. 70 DMS-CTC-20110909-0007 v0.1 8 GUI: Advanced Settings to edit an existing DNS entry. to delete an existing DNS entry. Adding a DNS entry On the DNS Server page: 1 Click Add DNS Entry at the bottom of the page. FT 2 The DNS Entry page appears. 3 Enter a DNS name for the host in the Host Name box. 4 Enter the IP address of the host in the IP Address box. 5 Click Apply. Accessing a device via its DNS name DR Once that a device is listed in the DNS table you can access it via. . Example Your host is using PC-Jim as DNS name and lan as DNS suffix (this is the default DNS suffix). If this host is running a web server, you can access it via http://PC-Jim.lan. If this host is a Windows computer with shared files on it, you can access these shared files via \\PC-Jim.lan. DMS-CTC-20110909-0007 v0.1 71 8 GUI: Advanced Settings 8.7 System Settings Introduction FT The System Settings page allows you to configure various system and management parameters. The page is divided into the following groups: Gateway Status Security Gateway Status DR Under Gateway Status, the following properties are available: Home Service Gateway’s Hostname Specify the HSG’s host name by entering it into the text box. The host name is used in combination with the Local Domain to access the HSG. Local Domain Specify the network’s local domain by entering it into this text box. The Local Domain is used in combination with the Home Service Gateway’s Hostname to access the HSG. So if you change the host name to gateway and the local domain to home, you will have to access the GUI using http://gateway.home instead of http://hsg.lan. Security Under Security, you can enter how many tries a user gets to login to the GUI without blocking GUI access. 72 DMS-CTC-20110909-0007 v0.1 8 GUI: Advanced Settings 8.8 Port Configuration Introduction The Port Configuration page allows you to set up the HSG’s Ethernet ports as either Supported speeds The HSG supports the following speeds: 1 Gigabit (=1000 Megabits) per second (Gbps) 100 Megabits per second (Mbps) FT 10 Megabits per seconds The HSG also has an Auto setting where it automatically selects the highest speed supported by the connected device. Supported Duplex The HSG supports the following communication systems: Full-duplex: Supports communication in both directions and at the same time. DR Half-duplex: Supports communication in both directions but only one at a time. DMS-CTC-20110909-0007 v0.1 73 8 GUI: Advanced Settings 8.9 Date and Time Introduction The Date and Time page allows you to configure the date and time that the HSG will be using for System logging. For more information, see “9.2.1 System Logging” on page 81. Accessing the Date and Time page Proceed as follows: 2 Under FT 1 On the top menu, click Advanced and then click Yes to confirm that you want to access the advanced settings. , click Date and Time. 3 In the Time Zone list, select your time zone or select Other to create one if your time zone is not listed. 4 Under Daylight Saving Time you can change the daylight saving settings 5 Under Automatic Time Update: DR Select Enabled if you want the HSG to synchronize its time settings with a Network Time Protocol (NTP) server. This guarantees you that you will always be using the correct time. Clear Enabled if you want to set the time manually. Use the Clock Set button on the bottom of the page to enter the correct date and time. 6 Click Apply. 74 DMS-CTC-20110909-0007 v0.1 8 GUI: Advanced Settings 8.10 IP Address Distribution Introduction The HSG’s DHCP server makes it possible to easily add computers configured as DHCP clients to the network. It provides a mechanism for allocating IP addresses to these hosts and for delivering network configuration parameters to them. FT For example, a client (host) sends out a broadcast message on the network requesting an IP address for itself. The DHCP server then checks its list of available addresses and leases a local IP address to the host for a specific period of time and simultaneously designates this IP address as “taken.” At this point, the host is configured with an IP address for the duration of the lease. The host can choose to renew an expiring lease or let it expire. If it chooses to renew a lease, it will also receive current information about network services, as it did with the original lease, allowing it to update its network configurations to reflect any changes that occurred since it first connected to the network. If the host wishes to terminate a lease before its expiration, it can send a release message to the DHCP server, which will then make the IP address available for use by others. DR HSG DHCP server functions The DHCP server of the HSG: Displays a list of all DHCP hosts devices connected to the HSG. Defines the range of IP addresses that can be allocated in the network. Defines the length of time for which dynamic IP addresses are allocated. Provides the above configurations for each network device and can be configured and enabled/disabled separately for each network device. Can assign a static lease to a network computer so that it receives the same IP address each time it connects to the network, even if this IP address is within the range of addresses that the DHCP server may assign to other computers. Provides the DNS server with the host name and IP address of each computer connected to the network. Accessing the IP Address Distribution page To view a summary of the services currently being provided by the DHCP server: 1 On the top menu, click Advanced and then click Yes to confirm that you want to access the advanced settings. 2 Under , click IP Address Distribution. DMS-CTC-20110909-0007 v0.1 75 8 GUI: Advanced Settings 3 The Routing page appears. Click: or the name of the entry to change the settings. Connection List to see the current DHCP connections. DR FT Access Control to allow/deny access for specific client based on their MAC address of the client. 76 DMS-CTC-20110909-0007 v0.1 FT DR GUI: System Monitoring 9 GUI: System Monitoring Introduction The System Monitoring menu consists of the following items: Router Status For more information, see “9.1 Router Status” on page 79. Advanced Status DR FT For more information, see “9.2 Advanced Status” on page 80. 78 DMS-CTC-20110909-0007 v0.1 9 GUI: System Monitoring 9.1 Router Status Introduction FT The Router Status page provides basic information about your HSG. Accessing the Router Status page DR On the top menu, click System Monitoring. DMS-CTC-20110909-0007 v0.1 79 9 GUI: System Monitoring 9.2 Advanced Status Introduction The Advanced Status page contains more advanced status information that is bundled in the following groups: System Logging: For more information, see “9.2.1 System Logging” on page 81. Full Status/System wide Monitoring of Connections: Traffic Monitoring: FT For more information, see “9.2.2 Full Status/System wide Monitoring of Connections” on page 82. For more information, see “9.2.3 Traffic Monitoring” on page 83. Bandwidth Monitoring: For more information, see “9.2.4 Bandwidth Monitoring” on page 84. IGMP Proxy: For more information, see “9.2.5 IGMP Proxy” on page 85. WARNING DR The advanced status pages are intended for advanced technical users only! Accessing the Advanced Status page Proceed as follows: 1 On the top menu, click System Monitoring and then click Yes to confirm that you want to access the advanced settings. 2 The Advanced Status page appears: 3 Click on the item that you want to view. 80 DMS-CTC-20110909-0007 v0.1 9 GUI: System Monitoring 9.2.1 System Logging Introduction The System Logging page summarizes the last events recorded on your Thomson Gateway. Accessing the System Logging page Proceed as follows: 1 On the top menu, click System Monitoring and then click Yes to confirm that you want to access the advanced settings. FT 2 The Advanced Status page appears. Click System Logging. DR 3 The System Logging page appears. DMS-CTC-20110909-0007 v0.1 81 9 GUI: System Monitoring 9.2.2 Full Status/System wide Monitoring of Connections Introduction The Full Status/System wide Monitoring of Connections page provides an overview of all network connections. Accessing the System Logging page Proceed as follows: 1 On the top menu, click System Monitoring and then click Yes to confirm that you want to access the advanced settings. FT 2 The Advanced Status page appears. Click Full Status/System wide Monitoring of Connections. DR 3 The Full Status/System wide Monitoring of Connections page appears. 4 Click: Refresh to update the information. Automatic Refresh On to let the HSG automatically update the information. 82 DMS-CTC-20110909-0007 v0.1 9 GUI: System Monitoring 9.2.3 Traffic Monitoring Introduction The HSG constantly monitors traffic within the local network and between the local network and the Internet. The Traffic Monitoring page allows you to view up-tothe-second statistical information about data received from and transmitted to the Internet, and about data received from and transmitted to computers in the local network. Accessing the System Logging page FT Proceed as follows: 1 On the top menu, click System Monitoring and then click Yes to confirm that you want to access the advanced settings. DR 2 The Advanced Status page appears. Click Traffic Monitoring. 3 The Traffic Monitoring page appears. Buttons Under the overview table, the following buttons are available Close to return to the Advanced Status page. Refresh to update the information. Automatic Refresh On to let the HSG automatically update the information every minute or Automatic Refresh Off to switch back to manual updating. DMS-CTC-20110909-0007 v0.1 83 9 GUI: System Monitoring 9.2.4 Bandwidth Monitoring Introduction The Bandwidth Monitoring page allows you to view the traffic sent or received by the HSG during a specific time slot. Accessing the System Logging page Proceed as follows: 1 On the top menu, click System Monitoring and then click Yes to confirm that you want to access the advanced settings. FT 2 The Advanced Status page appears. Click Bandwidth Monitoring. DR 3 The Bandwidth Monitoring page appears. Buttons Under the overview table, the following buttons are available Close to return to the Advanced Status page. Automatic Refresh On to let the HSG automatically update the information every minute or Automatic Refresh Off to switch back to manual updating. Refresh to update the information. Reset Statistics to reset the counters. Disable Statistics to turn off bandwidth monitoring or Enable Statistics to re- enable bandwidth monitoring. 84 DMS-CTC-20110909-0007 v0.1 9 GUI: System Monitoring 9.2.5 IGMP Proxy Introduction The IGMP Proxy task allows you to view IGMP Proxy multicast group memberships and statistics. Viewing the IGMP Proxy Multicast Group Membership page Proceed as follows: 1 On the top menu, click System Monitoring and then click Yes to confirm that you want to access the advanced settings. Click IGMP Proxy. FT 2 The Advanced Status page appears. DR 3 The Multicast Group Membership page appears. Viewing the IGMP Proxy Multicast Group Statistics Proceed as follows: 1 On the top menu, click System Monitoring and then click Yes to confirm that you want to access the advanced settings. 2 The Advanced Status page appears. Click Bandwidth Monitoring. 3 The Multicast Group Membership page appears. On the left menu, click IGMP Proxy Multicast Group Statistics. 4 The IGMP Proxy Multicast Group Statistics page appears. DMS-CTC-20110909-0007 v0.1 85 DR FT 9 GUI: System Monitoring 86 DMS-CTC-20110909-0007 v0.1 FT DR Support 10 Support Call the Help Desk DR FT If this Troubleshooting section does not provide a solution to your problem, please call the Help Desk at 800-837-4966. 88 DMS-CTC-20110909-0007 v0.1 10 Support 10.1 General Troubleshooting Check the LEDs If the HSG does not work as expected, the status LEDs on the front panel may provide you enough information to locate the problem: Color State Description Power Green Solid Powered on. Blinking Upgrade ongoing. Do not remove any cables or switch off the HSG when the HSG is upgrading. Red Off Green Solid Self-test failed, indicating device malfunction Not powered. Solid Connected to the Internet, no activity detected. DR Internet FT LED Orange Blinking Connected to the Internet, activity. Solid Failed to connecting to the Internet. Off Phone Green The HSG is either powered off or starting up. Solid Connected to the Verizon telephone network. Blinking Call ongoing or connecting to the Verizon telephone network. Red Solid Failed to connect to the Verizon telephone network. Orange Blinking Voice mail message available. Off WiFi Green Off DMS-CTC-20110909-0007 v0.1 The HSG is either powered off or telephony is not enabled. Solid Wireless is enabled on your HSG, no activity Blinking Wireless is enabled on your HSG, activity Wireless is disabled on your HSG. 89 10 Support LED Color State Description Ethernet Green Solid Connected to the Ethernet device, no activity Blinking Connected to the Ethernet device, activity No device connected. DR FT Off 90 DMS-CTC-20110909-0007 v0.1 10 Support 10.2 Troubleshooting Your Wireless Connection Windows can not find the HSG access point If the built-in Windows wireless client manager can not find your HSG access point: If you are using a laptop, check if your laptop has a button to enable/disable the wireless client. Switch it on and try again. Make sure your computer is within range. Make sure that wireless is enabled on your HSG: FT a Take a computer that is connected to the HSG or connect your computer with an Ethernet cable (for more information, see “2.3.2 Wired Connection to the HSG” on page 18). b Browse to the GUI. For more information, see “Accessing the GUI” on page 20. c On the Wireless Settings menu, click Basic Security Settings. d Under 1. Turn Wireless ON, select On. e Click Apply. DR Change the wireless channel: a Take a computer that is connected to the HSG or connect your computer with an Ethernet cable (for more information, see “2.3.2 Wired Connection to the HSG” on page 18). b Browse to the GUI. For more information, see “Accessing the GUI” on page 20. c On the Wireless Settings menu, click Basic Security Settings. d Under 3. Channel, select another channel. e Click Apply. Poor wireless connectivity Try the following: Change the wireless channel: a Take a computer that is connected to the HSG or connect your computer with an Ethernet cable (for more information, see “2.3.2 Wired Connection to the HSG” on page 18). b Browse to the GUI. For more information, see “Accessing the GUI” on page 20. c On the Wireless Settings menu, click Basic Security Settings. d Under 3. Channel, select another channel. e Click Apply. Check the signal strength, indicated by the wireless client manager. If the signal is low, try to move the HSG for optimal performance. DMS-CTC-20110909-0007 v0.1 91 10 Support Use WPA2 as encryption. For more information, see “4.3.1 Securing Your Wireless DR FT Connection” on page 36 92 DMS-CTC-20110909-0007 v0.1 10 Support 10.3 Resetting your HSG Resetting your HSG If at some point you can no longer connect to the HSG or you want to make a fresh install, it may be useful to perform a reset to factory defaults. Warning A reset to factory default settings deletes all configuration changes you made. For example: The ESSID and WPA key on the bottom of your HSG will be used to secure your FT wireless connection. So you may need to re-associate your wireless clients, as described in “2.3.1 Wireless Connection to the HSG” on page 14. The Login password required to access the GUI pages will be reset to the one that is printed on the bottom of the HSG. Methods You can choose between: Resetting the HSG via the HSG GUI DR Reset the HSG via the Reset button Resetting the HSG via the HSG GUI Proceed as follows: 1 Browse to the GUI. For more information, see “Accessing the GUI” on page 20. 2 On the menu on the top click Advanced. 3 The HSG prompts you to confirm your choice. Click Yes. 4 Under , click Restore Defaults. 5 The Restore Defaults page appears. Click Restore Defaults. 6 The HSG prompts you to confirm your choice, click OK. 7 The HSG restores the factory defaults and restarts. 8 The HSG returns to the HSG login page. Reset the HSG via the Reset button Proceed as follows: 1 Make sure the HSG is turned on. DMS-CTC-20110909-0007 v0.1 93 10 Support 2 Use a pen or an unfolded paperclip to push the recessed Reset button for 5 seconds and then release it. FT Reset DR 3 The HSG restarts with the factory default settings 94 DMS-CTC-20110909-0007 v0.1 10 Support 10.4 Configuring Dynamic IP Addressing on Windows Windows 7/Vista 1 Select Network and Sharing in the Control Panel. 2 Click View Status, then click Properties. 3 Click Continue in the User Account Control window. 4 In the General tab of the Local Area Connection Properties window select Internet Protocol Version 4 (TCP/IPv4), then click Properties. FT 5 The Internet Protocol Version 4 (TCP/IPv4) Properties window appears. 6 Click the Obtain an IP address automatically radio button. 7 Click the Obtain DNS server address automatically radio button. 8 Click OK in the Internet Protocol Version 4(TCP/IPv4) Properties window, then click OK in the Local Area Connection Properties screen to save the settings. Windows XP 1 Select Network Connections in the Control Panel. DR 2 Right-click Ethernet Local Area Connection, then click Properties. 3 In the General tab, select Internet Protocol (TCP/IP), then click Properties. 4 The Internet Protocol (TCP/IP) Properties window appears. 5 Click the Obtain an IP address automatically radio button. 6 Click the Obtain DNS server address automatically radio button. 7 Click OK in the Internet Protocol (TCP/IP) Properties screen, then click OK in the Local Area Connection Properties screen to save the settings. Macintosh OS X 1 Click on the Apple icon in the top left corner of the desktop. 2 From the menu that appears, select System Preferences. 3 The System Preferences window appears. Click Network. 4 From the Network window, make sure Ethernet in the list on the left is highlighted and displays Connected” 5 Click Assist me. 6 From the tab that appears, click Diagnostics. 7 Follow the instructions in the Network Diagnostics assistant. DMS-CTC-20110909-0007 v0.1 95 DR FT 10 Support 96 DMS-CTC-20110909-0007 v0.1
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Extract, Print high-res XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0 (Windows) Create Date : 2011:10:17 17:05:57+08:00 Modify Date : 2011:10:17 17:10:21+08:00 Metadata Date : 2011:10:17 17:10:21+08:00 Document ID : uuid:08CE7F309FF8E0119FE395DBE9024DB6 Instance ID : uuid:1c3bfea2-3df0-4945-892c-1baf14d7338f Derived From Instance ID : uuid:35e9b769-6ecb-43cb-87bb-de768f706ac3 Derived From Document ID : uuid:69602ee1-b6e9-4843-bd23-847ea2febf1a Format : application/pdf Title : untitled Page Count : 102EXIF Metadata provided by EXIF.tools