Technisonic T1088A 800 rf modular User Manual users manual

Download:
Mirror Download [FCC.gov]
Document ID	426661
Application ID	OeHqXcjSJ0sI28msuxjxqg==
Document Description	users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	125.17kB (1564658 bits)
Date Submitted	2004-05-28 00:00:00
Date Available	2004-05-28 00:00:00
Creation Date	2003-10-14 10:47:50
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2004-02-11 17:16:40
Document Title	ASTRO XTS 5000 VHF/UHF R1/700-800 MHz Digital Portable Radio Detailed Service Manual
Document Creator	FrameMaker 6.0
Document Author:	Motorola, Inc.

®
™
ASTRO XTS 5000
VHF
UHF Range 1
700 — 800 MHz
Digital Portable Radios
Detailed Service Manual
ASTRO® XTS™ 5000
Title Page
VHF/UHF Range 1/700–800 MHz
Digital Portable Radios
Detailed Service Manual
Motorola, Inc.
8000 West Sunrise Boulevard
Fort Lauderdale, Florida 33322
6881094C31-C
Foreword
The information contained in this manual relates to all ASTRO® XTS™ 5000 digital portable radios, unless otherwise
specified. This manual provides sufficient information to enable qualified service shop technicians to troubleshoot and
repair an ASTRO XTS 5000 digital portable radio to the component level.
For details on the operation of the radio or level 1 or 2 maintenance procedures, refer to the applicable manuals, which are
available separately. A list of related publications is provided in the section, “Related Publications,” on page xii.
Product Safety and RF Exposure Compliance
Caution
Before using this product, read the operating instructions
for safe usage contained in the Product Safety and RF
Exposure booklet enclosed with your radio.
ATTENTION!
This radio is restricted to occupational use only to satisfy FCC RF energy exposure requirements.
Before using this product, read the RF energy awareness information and operating instructions in the
Product Safety and RF Exposure booklet enclosed with your radio (Motorola Publication part number
6881095C98) to ensure compliance with RF energy exposure limits.
For a list of Motorola-approved antennas, batteries, and other accessories, visit the following web site
which lists approved accessories: 
Manual Revisions
Changes which occur after this manual is printed are described in FMRs (Florida Manual Revisions). These FMRs provide
complete replacement pages for all added, changed, and deleted items, including pertinent parts list data, schematics, and
component layout diagrams. To obtain FMRs, contact the Customer Care and Services Division (refer to “Appendix A
Replacement Parts Ordering”).
Computer Software Copyrights
The Motorola products described in this manual may include copyrighted Motorola computer programs stored in
semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola certain
exclusive rights for copyrighted computer programs, including, but not limited to, the exclusive right to copy or reproduce in
any form the copyrighted computer program. Accordingly, any copyrighted Motorola computer programs contained in the
Motorola products described in this manual may not be copied, reproduced, modified, reverse-engineered, or distributed in
any manner without the express written permission of Motorola. Furthermore, the purchase of Motorola products shall not
be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or
patent applications of Motorola, except for the normal non-exclusive license to use that arises by operation of law in the
sale of a product.
Document Copyrights
No duplication or distribution of this document or any portion thereof shall take place without the express written permission
of Motorola. No part of this manual may be reproduced, distributed, or transmitted in any form or by any means, electronic
or mechanical, for any purpose without the express written permission of Motorola.
Disclaimer
The information in this document is carefully examined, and is believed to be entirely reliable. However, no responsibility is
assumed for inaccuracies. Furthermore, Motorola reserves the right to make changes to any products herein to improve
readability, function, or design. Motorola does not assume any liability arising out of the applications or use of any product
or circuit described herein; nor does it cover any license under its patent rights nor the rights of others.
Trademarks
MOTOROLA, the Stylized M logo, and ASTRO are registered in the US Patent & Trademark Office. All other product or
service names are the property of their respective owners.
© Motorola, Inc. 2003.
Table of Contents
Foreword .........................................................................................................ii
Product Safety and RF Exposure Compliance ............................................................................................ii
Manual Revisions ........................................................................................................................................ii
Computer Software Copyrights ...................................................................................................................ii
Document Copyrights ..................................................................................................................................ii
Disclaimer....................................................................................................................................................ii
Trademarks .................................................................................................................................................ii
List of Figures ..............................................................................................vii
List of Tables .................................................................................................xi
Commercial Warranty .................................................................................xiii
Limited Warranty ...................................................................................................................................... xiii
MOTOROLA COMMUNICATION PRODUCTS .............................................................................. xiii
I. What This Warranty Covers And For How Long ................................................................... xiii
II. General Provisions ............................................................................................................... xiii
III. State Law Rights ................................................................................................................. xiv
IV. How To Get Warranty Service ............................................................................................ xiv
V. What This Warranty Does Not Cover................................................................................... xiv
VI. Patent And Software Provisions ..........................................................................................xv
VII. Governing Law....................................................................................................................xv
Model Numbering, Charts, and Specifications........................................xvii
Portable Radio Model Numbering System .............................................................................................. xvii
ASTRO XTS 5000 VHF Model Chart ..................................................................................................... xviii
ASTRO XTS 5000 R (Ruggedized) VHF Model Chart ............................................................................. xix
ASTRO XTS 5000 UHF Range 1 Model Chart..........................................................................................xx
ASTRO XTS 5000 R (Ruggedized) UHF Range 1 Model Chart .............................................................. xxi
ASTRO XTS 5000 700–800 MHz Model Chart ....................................................................................... xxii
ASTRO XTS 5000 R (Ruggedized) 700–800 MHz Model Chart ............................................................ xxiii
Specifications for VHF Radios................................................................................................................ xxiv
Specifications for UHF Range 1 Radios .................................................................................................. xxv
Specifications for 700–800 MHz Radios................................................................................................. xxvi
Chapter 1
1.1
1.2
Introduction ......................................................................... 1-1
General .......................................................................................................................................... 1-1
Notations Used in This Manual...................................................................................................... 1-2
Chapter 2
Radio Power ........................................................................ 2-1
iv
Table of Contents
2.1
2.2
2.3
General .......................................................................................................................................... 2-1
DC Power Routing—Transceiver Board ........................................................................................ 2-3
DC Power Routing—VOCON Board.............................................................................................. 2-3
Chapter 3
3.1
3.2
Theory of Operation............................................................ 3-1
Transceiver Board.......................................................................................................................... 3-2
3.1.1 Interconnections................................................................................................................ 3-3
3.1.1.1 Battery Connector J3 ............................................................................................... 3-3
3.1.1.2 VOCON Connector P1............................................................................................. 3-3
3.1.1.3 Antenna Port J2 ....................................................................................................... 3-5
3.1.1.4 Serial EEPROM ....................................................................................................... 3-5
3.1.1.5 Power Conditioning Components ............................................................................ 3-5
3.1.2 Receiver............................................................................................................................ 3-5
3.1.2.1 Receiver Front End .................................................................................................. 3-6
3.1.2.2 Receiver Back End .................................................................................................. 3-7
3.1.3 Transmitter........................................................................................................................ 3-8
3.1.3.1 Power Distribution.................................................................................................... 3-9
3.1.3.2 Driver Amplifier ........................................................................................................ 3-9
3.1.3.3 Power Amplifier Transistor Q107 ........................................................................... 3-10
3.1.3.4 Directional Coupler ................................................................................................ 3-10
3.1.3.5 Antenna Switch ...................................................................................................... 3-10
3.1.3.6 Harmonic Filter....................................................................................................... 3-10
3.1.3.7 RF Detectors D101 and D102................................................................................ 3-11
3.1.3.8 Summing Amplifier U106 ....................................................................................... 3-11
3.1.3.9 Power-Control IC (PCIC) U104.............................................................................. 3-11
3.1.4 Frequency Generation Unit (FGU).................................................................................. 3-13
3.1.4.1 Reference Oscillator Y200 ..................................................................................... 3-13
3.1.4.2 Fractional-N Frequency Synthesizer (FracN) IC U202 .......................................... 3-14
3.1.4.3 Loop Filter .............................................................................................................. 3-15
3.1.4.4 VCO Buffer IC (VCOBIC)....................................................................................... 3-15
VOCON Board ............................................................................................................................. 3-16
3.2.1 Interconnections.............................................................................................................. 3-16
3.2.1.1 Universal Connector J101...................................................................................... 3-17
3.2.1.2 Encryption Connector J701.................................................................................... 3-17
3.2.1.3 Keypad Module Connector P107 ........................................................................... 3-17
3.2.1.4 RF Interface Connector P201 ................................................................................ 3-17
3.2.1.5 Display Module Connector P301 ........................................................................... 3-17
3.2.2 Controller and Memory ................................................................................................... 3-17
3.2.2.1 Patriot IC U401 ...................................................................................................... 3-18
3.2.2.2 Static RAM (SRAM) U403...................................................................................... 3-20
3.2.2.3 FLASH Memory U402............................................................................................ 3-21
3.2.3 Audio and Power............................................................................................................. 3-22
3.2.3.1 GCAP II IC U501.................................................................................................... 3-22
3.2.3.2 5 V Regulator U505 ............................................................................................... 3-23
3.2.3.3 1.55 V Regulator .................................................................................................... 3-23
3.2.3.4 Audio Pre-Amplifier U502 ...................................................................................... 3-24
3.2.3.5 Audio Power Amplifier U503 .................................................................................. 3-24
3.2.3.6 EEPOT U509 ......................................................................................................... 3-24
3.2.4 Interface Support ............................................................................................................ 3-24
3.2.4.1 Flipper IC U301...................................................................................................... 3-25
3.2.4.2 ESD Protection Circuitry ........................................................................................ 3-27
3.2.4.3 Universal Connector Interface Circuitry ................................................................. 3-28
October 14, 2003
6881094C31-C
Table of Contents
3.3
3.2.4.4 Display Module ...................................................................................................... 3-29
3.2.4.5 Keypad Module...................................................................................................... 3-30
3.2.4.6 Controls and Control Top Flex............................................................................... 3-30
3.2.4.7 System Clocks ....................................................................................................... 3-31
3.2.5 VOCON Audio Paths ...................................................................................................... 3-32
3.2.5.1 Transmit Audio Path .............................................................................................. 3-32
3.2.5.2 Receive Audio Path ............................................................................................... 3-33
3.2.6 Radio Power-Up/Power-Down Sequence....................................................................... 3-33
Encryption Module ....................................................................................................................... 3-34
Chapter 4
4.1
4.2
4.3
4.4
4.5
4.6
Troubleshooting Charts ..................................................... 5-1
List of Troubleshooting Charts....................................................................................................... 5-1
Main Troubleshooting Flowchart.................................................................................................... 5-2
Power-Up Failure........................................................................................................................... 5-3
DC Supply Failure.......................................................................................................................... 5-5
Display Failure (NNTN4563, NNTN4819, & NNTN4717 VOCON Kits) ......................................... 5-8
Display Failure (NTN9564) .......................................................................................................... 5-11
Volume Set Error ......................................................................................................................... 5-14
Channel/Zone Select Error .......................................................................................................... 5-15
Button Test .................................................................................................................................. 5-16
Top/Side Button Test ................................................................................................................... 5-17
VCO TX/RX Unlock ..................................................................................................................... 5-18
VOCON TX Audio........................................................................................................................ 5-19
VOCON RX Audio ....................................................................................................................... 5-21
RX RF .......................................................................................................................................... 5-23
TX RF (VHF) ................................................................................................................................ 5-28
TX RF (UHF R1/700-800 MHz) ................................................................................................... 5-31
Keyload Failure............................................................................................................................ 5-34
Secure Hardware Failure............................................................................................................. 5-35
Chapter 6
6.1
6.2
6.3
6.4
6.5
6.6
6.7
6.8
Troubleshooting Procedures ............................................. 4-1
Handling Precautions..................................................................................................................... 4-1
Recommended Service Tools........................................................................................................ 4-2
Voltage Measurement and Signal Tracing..................................................................................... 4-3
Standard Bias Table ...................................................................................................................... 4-4
Power-Up Self-Check Errors ......................................................................................................... 4-5
Power-Up Self-Check Diagnostics and Repair (Not for Field Use)................................................ 4-6
Chapter 5
5.1
5.2
5.3
5.4
5.5
5.6
5.7
5.8
5.9
5.10
5.11
5.12
5.13
5.14
5.15
5.16
5.17
5.18
Troubleshooting Waveforms ............................................. 6-1
List of Waveforms .......................................................................................................................... 6-1
13 MHz Clock ................................................................................................................................ 6-2
16.8 MHz Buffer Input and Output ................................................................................................. 6-3
32.768 kHz Clock Outputs ............................................................................................................. 6-4
SPI B Data ..................................................................................................................................... 6-5
Receive Serial Audio Port (SAP) ................................................................................................... 6-6
Receive Baseband Interface Port (RX BBP) ................................................................................. 6-7
Transmit Baseband Interface Port (TX BBP)................................................................................. 6-8
6881094C31-C
October 14, 2003
vi
Table of Contents
Chapter 7
7.1
List of Board and IC Signals .......................................................................................................... 7-1
Chapter 8
8.1
8.2
8.3
8.4
Troubleshooting Tables ..................................................... 7-1
Schematics, Board Overlays, and Parts Lists.................. 8-1
List of Transceiver Schematics and Board Overlays ..................................................................... 8-1
List of VOCON Schematics and Board Overlays........................................................................... 8-1
Transceiver (RF) Boards................................................................................................................ 8-3
VOCON Boards ........................................................................................................................... 8-79
Appendix A Replacement Parts Ordering..............................................A-1
A.1
A.2
A.3
A.4
A.5
A.6
A.7
A.8
Basic Ordering Information ............................................................................................................A-1
Transceiver Board and VOCON Board Ordering Information........................................................A-1
Motorola Online..............................................................................................................................A-1
Mail Orders ....................................................................................................................................A-1
Telephone Orders ..........................................................................................................................A-2
Fax Orders .....................................................................................................................................A-2
Parts Identification .........................................................................................................................A-2
Product Customer Service .............................................................................................................A-2
Glossary......................................................................................... Glossary-1
Index..................................................................................................... Index-1
October 14, 2003
6881094C31-C
List of Figures
vii
List of Figures
Figure 2-1.
Figure 2-2.
Figure 3-1.
Figure 3-2.
Figure 3-3.
DC Power Distribution—UHF Range 1 and 700–800 MHz Radios ...................................... 2-2
DC Power Distribution—VHF Radios.................................................................................... 2-2
XTS 5000 Overall Block Diagram ......................................................................................... 3-1
Transceiver (VHF) Block Diagram (Power and Control Omitted) ......................................... 3-2
Transceiver (UHF Range 1 and 700–800 MHz) Block Diagram
(Power and Control Omitted) ................................................................................................ 3-3
Figure 3-4. Receiver Block Diagram ....................................................................................................... 3-5
Figure 3-5. Abacus III (AD9874) Functional Block Diagram (from data sheet) ....................................... 3-7
Figure 3-6. Transmitter Block Diagram ................................................................................................... 3-9
Figure 3-7. VOCON Board Interconnections......................................................................................... 3-16
Figure 3-8. Patriot EIM and Memory Block Diagram............................................................................. 3-21
Figure 3-9. Universal (Side) Connector................................................................................................. 3-28
Figure 3-10. VOCON Board Connector—J101 ....................................................................................... 3-28
Figure 3-11. Control Top Flex.................................................................................................................. 3-31
Figure 3-12. VOCON Transmit Audio Path ............................................................................................. 3-32
Figure 3-13. VOCON Receive Audio Path .............................................................................................. 3-33
Figure 6-1. 13 MHz Clock Waveform ...................................................................................................... 6-2
Figure 6-2. 16.8 MHz Buffer Input and Output Waveforms ..................................................................... 6-3
Figure 6-3. 32.768 kHz Clock Outputs Waveforms ................................................................................. 6-4
Figure 6-4. SPI B Data Waveforms ......................................................................................................... 6-5
Figure 6-5. Receive Serial Audio Port (SAP) Waveforms ....................................................................... 6-6
Figure 6-6. Receive Baseband Interface Port (RX BBP) Waveforms ..................................................... 6-7
Figure 6-7. Transmit Baseband Interface Port (TX BBP) Waveforms ..................................................... 6-8
Figure 8-1. NUF3577 700–800 MHz Transceiver (RF) Board Overall Circuit Schematic ....................... 8-3
Figure 8-2. NUF3577 700–800 MHz Antenna Switch and Harmonic Filter Circuits................................ 8-4
Figure 8-3. NUF3577 700–800 MHz Receiver Front End Circuit ............................................................ 8-5
Figure 8-4. NUF3577 700–800 MHz Receiver Back End Circuit ............................................................ 8-6
Figure 8-5. NUF3577 700–800 MHz Transmitter and Automatic Level Control Circuits......................... 8-7
Figure 8-6. NUF3577 700–800 MHz Frequency Generation Unit (Synthesizer) Circuit—1 of 2 ............. 8-8
Figure 8-7. NUF3577 700–800 MHz Frequency Generation Unit (VCO) Circuit—2 of 2 ........................ 8-9
Figure 8-8. NUF3577 700–800 MHz Transceiver (RF) Board Layout—Side 1 ..................................... 8-10
Figure 8-9. NUF3577 700–800 MHz Transceiver (RF) Board Layout—Side 2 ..................................... 8-11
Figure 8-10. NUF3577C 700–800 MHz Transceiver (RF) Board Overall Circuit Schematic................... 8-17
Figure 8-11. NUF3577C 700–800 MHz Antenna Switch and Harmonic Filter Circuits ........................... 8-18
Figure 8-12. NUF3577C 700–800 MHz Receiver Front End Circuit ....................................................... 8-19
Figure 8-13. NUF3577C 700–800 MHz Receiver Back End Circuit........................................................ 8-20
Figure 8-14. NUF3577C 700–800 MHz Transmitter and Automatic Level Control Circuits .................... 8-21
Figure 8-15. NUF3577C 700–800 MHz Frequency Generation Unit (Synthesizer) Circuit ..................... 8-22
Figure 8-16. NUF3577C 700–800 MHz Frequency Generation Unit (VCO) Circuit ................................ 8-23
Figure 8-17. NUF3577C 700–800 MHz Transceiver (RF) Board Layout—Side 1 .................................. 8-24
Figure 8-18. NUF3577C 700–800 MHz Transceiver (RF) Board Layout—Side 2 .................................. 8-25
Figure 8-19. NLD8910B VHF Transceiver (RF) Board Overall Circuit Schematic .................................. 8-31
Figure 8-20. NLD8910B VHF DC Power Circuits.................................................................................... 8-32
Figure 8-21. NLD8910B VHF Antenna Switch and Harmonic Filter Circuits........................................... 8-33
Figure 8-22. NLD8910B VHF Receiver Front End Circuit ....................................................................... 8-34
Figure 8-23. NLD8910B VHF Receiver Amplifier and Filter Circuit......................................................... 8-35
Figure 8-24. NLD8910B VHF Mixer and IF Filter Circuits ....................................................................... 8-36
Figure 8-25. NLD8910B VHF Receiver Back End Circuit ....................................................................... 8-37
6881094C31-C
October 14, 2003
viii
List of Figures
Figure 8-26. NLD8910B VHF Transmitter and Automatic Level Control Circuits ................................... 8-38
Figure 8-27. NLD8910B VHF Frequency Generation Unit (Synthesizer) Circuit..................................... 8-39
Figure 8-28. NLD8910B VHF Frequency Generation Unit (VCO) Circuit................................................ 8-40
Figure 8-29. NLD8910B VHF Transceiver (RF) Board Layout—Side 1 .................................................. 8-41
Figure 8-30. NLD8910B VHF Transceiver (RF) Board Layout—Side 2 .................................................. 8-42
Figure 8-31. NLE4272A UHF Range 1 Transceiver (RF) Board Overall Circuit Schematic.................... 8-48
Figure 8-32. NLE4272A UHF Range 1 Antenna Switch and Harmonic Filter Circuits ............................ 8-49
Figure 8-33. NLE4272A UHF Range 1 Receiver Front End (RX_FE) Circuit.......................................... 8-50
Figure 8-34. NLE4272A UHF Range 1 Receiver Back End (RX_BE) Circuit.......................................... 8-51
Figure 8-35. NLE4272A UHF Range 1 Transmitter Power Amplifier and Automatic Level Control (TX_ALC)
Circuit .................................................................................................................................. 8-52
Figure 8-36. NLE4272A UHF Range 1 Frequency Generation Unit (Synthesizer) Circuit ...................... 8-53
Figure 8-37. NLE4272A UHF Range 1 Frequency Generation Unit (VCO) Circuit ................................ 8-54
Figure 8-38. NLE4272A UHF Range 1 Transceiver (RF) Board Layout—Side 1.................................... 8-55
Figure 8-39. NLE4272A UHF Range 1 Transceiver (RF) Board Layout—Side 2.................................... 8-56
Figure 8-40. NLE4278A UHF Range 1 Transceiver (RF) Board Overall Circuit Schematic.................... 8-64
Figure 8-41. NLE4278A UHF Range 1 Antenna Switch and Harmonic Filter Circuits ............................ 8-65
Figure 8-42. NLE4278A UHF Range 1 Receiver Front End Circuit......................................................... 8-66
Figure 8-43. NLE4278A UHF Range 1 Receiver Back End Circuit ......................................................... 8-67
Figure 8-44. NLE4278A UHF Range 1 Transmitter Power Amplifier and Automatic Level Control
Circuit .................................................................................................................................. 8-68
Figure 8-45. NLE4278A UHF Range 1 Frequency Unit (Synthesizer) Circuit ......................................... 8-69
Figure 8-46. NLE4278A UHF Range 1 Frequency Generation Unit (VCO) Circuit ................................. 8-70
Figure 8-47. NLE4278A UHF Range 1 Transceiver (RF) Board Layout—Side 1.................................... 8-71
Figure 8-48. NLE4278A UHF Range 1 Transceiver (RF) Board Layout—Side 2.................................... 8-72
Figure 8-49. NTN9564B VOCON Board Overall Schematic—1 of 2....................................................... 8-79
Figure 8-50. NTN9564B VOCON Board Overall Schematic—2 of 2....................................................... 8-80
Figure 8-51. NTN9564B VOCON Universal Connector Circuit ............................................................... 8-81
Figure 8-52. NTN9564B VOCON Flipper Circuit ..................................................................................... 8-82
Figure 8-53. NTN9564B VOCON Controller and Memory Circuits—1 of 2 ............................................. 8-83
Figure 8-54. NTN9564B VOCON Controller and Memory Circuits—2 of 2 ............................................. 8-84
Figure 8-55. NTN9564B VOCON Audio and DC Circuits........................................................................ 8-85
Figure 8-56. NTN9564B VOCON Board Layout—Side 1 ........................................................................ 8-86
Figure 8-57. NTN9564B VOCON Board Layout—Side 2 ........................................................................ 8-87
Figure 8-58. NTN9564C VOCON Board Overall Schematic—1 of 2....................................................... 8-93
Figure 8-59. NTN9564C VOCON Board Overall Schematic—2 of 2....................................................... 8-94
Figure 8-60. NTN9564C VOCON Universal Connector Circuit ............................................................... 8-95
Figure 8-61. NTN9564C VOCON Flipper Circuit..................................................................................... 8-96
Figure 8-62. NTN9564C VOCON Controller and Memory Circuits—1 of 2............................................. 8-97
Figure 8-63. NTN9564C VOCON Controller and Memory Circuits—2 of 2............................................. 8-98
Figure 8-64. NTN9564C VOCON Audio and DC Circuits........................................................................ 8-99
Figure 8-65. NTN9564C VOCON Board Layout—Side 1...................................................................... 8-100
Figure 8-66. NTN9564C VOCON Board Layout—Side 2...................................................................... 8-101
Figure 8-67. NNTN4563A/B VOCON Board Overall Schematic—1 of 2............................................... 8-107
Figure 8-68. NNTN4563A/B VOCON Board Overall Schematic—2 of 2............................................... 8-108
Figure 8-69. NNTN4563A/B VOCON Universal Connector Circuit ....................................................... 8-109
Figure 8-70. NNTN4563A/B VOCON Flipper Circuit ............................................................................. 8-110
Figure 8-71. NNTN4563A/B VOCON Controller and Memory Circuits—1 of 2 ..................................... 8-111
Figure 8-72. NNTN4563A/B VOCON Controller and Memory Circuits—2 of 2 ..................................... 8-112
Figure 8-73. NNTN4563A/B VOCON Audio and DC Circuits................................................................ 8-113
Figure 8-74. NNTN4563A/B VOCON Board Layout—Side 1 ................................................................ 8-114
Figure 8-75. NNTN4563A/B VOCON Board Layout—Side 2 ................................................................ 8-115
Figure 8-76. NNTN4819A VOCON Board Overall Schematic—Sheet 1 of 2........................................ 8-122
Figure 8-77. NNTN4819A VOCON Board Overall Schematic—Sheet 2 of 2........................................ 8-123
October 14, 2003
6881094C31-C
List of Figures
ix
Figure 8-78. NNTN4819A VOCON Universal Connector and ESD Circuits ......................................... 8-124
Figure 8-79. NNTN4819A VOCON Flipper Circuit ................................................................................ 8-125
Figure 8-80. NNTN4819A VOCON Controller and Memory Circuits—Sheet 1 of 2.............................. 8-126
Figure 8-81. NNTN4819A VOCON Controller and Memory Circuits—Sheet 2 of 2.............................. 8-127
Figure 8-82. NNTN4819A VOCON Audio/DC Circuits .......................................................................... 8-128
Figure 8-83. NNTN4819A VOCON Board Layout—Side 1 ................................................................... 8-129
Figure 8-84. NNTN4819A VOCON Board Layout—Side 2 ................................................................... 8-130
Figure 8-85. NNTN4717D VOCON Board Overall Schematic—Sheet 1 of 2 ....................................... 8-136
Figure 8-86. NNTN4717D VOCON Board Overall Schematic—Sheet 2 of 2 ....................................... 8-137
Figure 8-87. NNTN4717D VOCON Board Universal Connector Circuit Schematic .............................. 8-138
Figure 8-88. NNTN4717D VOCON Board Flipper Circuit ..................................................................... 8-139
Figure 8-89. NNTN4717D VOCON Board Controller and Memory Circuits—Sheet 1 of 2 ................... 8-140
Figure 8-90. NNTN4717D VOCON Board Controller and Memory Circuits—Sheet 2 of 2 ................... 8-141
Figure 8-91. NNTN4717D VOCON Board Audio/DC Circuits ............................................................... 8-142
Figure 8-92. NNTN4717D VOCON Board Layout—Side 1 ................................................................... 8-143
Figure 8-93. NNTN4717D VOCON Board Layout—Side 2 ................................................................... 8-144
6881094C31-C
October 14, 2003
x
October 14, 2003
List of Figures
6881094C31-C
List of Tables
xi
List of Tables
Table 2-1.
Table 2-2.
Table 2-3.
Table 2-4.
Table 3-1.
Table 3-2.
Table 3-3.
Table 3-4.
Table 3-5.
Table 3-6.
Table 4-1.
Table 4-2.
Table 4-3.
Table 4-4.
Table 5-1.
Table 6-1.
Table 7-1.
Table 7-2.
Table 7-3.
Table 7-4.
Table 7-5.
Table 7-6.
Table 7-7.
Table 7-8.
Table 7-9.
Table 8-1.
Table 8-2.
6881094C31-C
Conventional Batteries.......................................................................................................... 2-1
Smart Batteries ..................................................................................................................... 2-1
Transceiver Voltage Regulators ............................................................................................ 2-3
VOCON Board DC Power Distribution.................................................................................. 2-4
Battery Connector J3 ............................................................................................................ 3-3
VOCON Connector P1.......................................................................................................... 3-4
Power Control IC (U104) Pin Descriptions.......................................................................... 3-11
Audio PA Status .................................................................................................................. 3-24
Option-Select Functions ..................................................................................................... 3-29
Encryption Module Software Kits and Algorithms ............................................................... 3-34
Recommended Service Tools ............................................................................................... 4-2
Standard Operating Bias....................................................................................................... 4-4
Power-Up Self-Check Error Codes ....................................................................................... 4-5
Power-Up Self-Check Diagnostic Actions............................................................................. 4-6
Troubleshooting Charts List .................................................................................................. 5-1
List of Waveforms ................................................................................................................. 6-1
List of Tables of Board and IC Signals .................................................................................. 7-1
J101 VOCON Board to Controls Flex Assembly................................................................... 7-1
J107 VOCON Board to Keypad Module ............................................................................... 7-3
J701 VOCON Board to Encryption Module........................................................................... 7-3
U402 FLASH Pinouts............................................................................................................ 7-5
U403 SRAM Pinouts ............................................................................................................. 7-7
U401 Patriot MCU/DSP IC Pinouts....................................................................................... 7-9
U301 Flipper IC Pinouts...................................................................................................... 7-18
U501 GCAP II IC Pinouts.................................................................................................... 7-20
List of Transceiver Schematics and Board Overlays ............................................................ 8-1
List of VOCON Schematics and Board Overlays.................................................................. 8-1
October 14, 2003
xii
List of Tables
Related Publications
ASTRO XTS 5000 Digital Portable Radio Model I User Guide ................................................. 6881094C25
ASTRO XTS 5000 Digital Portable Radio Model II User Guide ................................................ 6881094C26
ASTRO XTS 5000 Digital Portable Radio Model III User Guide ............................................... 6881094C27
ASTRO XTS 5000 VHF/UHF Range 1/700–800 MHz Digital Portable Radios
Basic Service Manual ......................................................................................................... 6881094C28
Factory Mutual Approval XTS 5000 Product Listing Manual Supplement................................. 6881094C78
October 14, 2003
6881094C31-C
Commercial Warranty
Limited Warranty
MOTOROLA COMMUNICATION PRODUCTS
I. What This Warranty Covers And For How Long
MOTOROLA INC. (“MOTOROLA”) warrants the MOTOROLA manufactured Communication
Products listed below (“Product”) against defects in material and workmanship under normal use and
service for a period of time from the date of purchase as scheduled below:
ASTRO XTS 5000 Digital Portable Units
One (1) Year
Product Accessories
One (1) Year
Motorola, at its option, will at no charge either repair the Product (with new or reconditioned parts),
replace it (with a new or reconditioned Product), or refund the purchase price of the Product during
the warranty period provided it is returned in accordance with the terms of this warranty. Replaced
parts or boards are warranted for the balance of the original applicable warranty period. All replaced
parts of Product shall become the property of MOTOROLA.
This express limited warranty is extended by MOTOROLA to the original end user purchaser only
and is not assignable or transferable to any other party. This is the complete warranty for the Product
manufactured by MOTOROLA. MOTOROLA assumes no obligations or liability for additions or
modifications to this warranty unless made in writing and signed by an officer of MOTOROLA.
Unless made in a separate agreement between MOTOROLA and the original end user purchaser,
MOTOROLA does not warrant the installation, maintenance or service of the Product.
MOTOROLA cannot be responsible in any way for any ancillary equipment not furnished by
MOTOROLA which is attached to or used in connection with the Product, or for operation of the
Product with any ancillary equipment, and all such equipment is expressly excluded from this
warranty. Because each system which may use the Product is unique, MOTOROLA disclaims
liability for range, coverage, or operation of the system as a whole under this warranty.
II. General Provisions
This warranty sets forth the full extent of MOTOROLA’s responsibilities regarding the Product.
Repair, replacement or refund of the purchase price, at MOTOROLA’s option, is the exclusive
remedy. THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES. IMPLIED
WARRANTIES, INCLUDING WITHOUT LIMITATION, IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE
DURATION OF THIS LIMITED WARRANTY. IN NO EVENT SHALL MOTOROLA BE LIABLE FOR
DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT, FOR ANY LOSS OF
USE, LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS, LOST PROFITS OR SAVINGS
OR OTHER INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
USE OR INABILITY TO USE SUCH PRODUCT, TO THE FULL EXTENT SUCH MAY BE
DISCLAIMED BY LAW.
xiv
Commercial Warranty
III. State Law Rights
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES OR LIMITATION ON HOW LONG AN IMPLIED WARRANTY
LASTS, SO THE ABOVE LIMITATION OR EXCLUSIONS MAY NOT APPLY.
This warranty gives specific legal rights, and there may be other rights which may vary from state to
state.
IV. How To Get Warranty Service
You must provide proof of purchase (bearing the date of purchase and Product item serial number)
in order to receive warranty service and, also, deliver or send the Product item, transportation and
insurance prepaid, to an authorized warranty service location. Warranty service will be provided by
Motorola through one of its authorized warranty service locations. If you first contact the company
which sold you the Product, it can facilitate your obtaining warranty service. You can also call
Motorola at 1-888-567-7347 US/Canada.
V. What This Warranty Does Not Cover
A. Defects or damage resulting from use of the Product in other than its normal and customary
manner.
B. Defects or damage from misuse, accident, water, or neglect.
C. Defects or damage from improper testing, operation, maintenance, installation, alteration,
modification, or adjustment.
D. Breakage or damage to antennas unless caused directly by defects in material workmanship.
E. A Product subjected to unauthorized Product modifications, disassemblies or repairs
(including, without limitation, the addition to the Product of non-Motorola supplied equipment)
which adversely affect performance of the Product or interfere with Motorola’s normal
warranty inspection and testing of the Product to verify any warranty claim.
F.
Product which has had the serial number removed or made illegible.
G. Rechargeable batteries if:
•
any of the seals on the battery enclosure of cells are broken or show evidence of
tampering.
•
the damage or defect is caused by charging or using the battery in equipment or service
other than the Product for which it is specified.
H. Freight costs to the repair depot.
I.
A Product which, due to illegal or unauthorized alteration of the software/firmware in the
Product, does not function in accordance with MOTOROLA’s published specifications or the
FCC type acceptance labeling in effect for the Product at the time the Product was initially
distributed from MOTOROLA.
J.
Scratches or other cosmetic damage to Product surfaces that does not affect the operation of
the Product.
K. Normal and customary wear and tear.
October 14, 2003
6881094C31-C
Commercial Warranty
xv
VI. Patent And Software Provisions
MOTOROLA will defend, at its own expense, any suit brought against the end user purchaser to the
extent that it is based on a claim that the Product or parts infringe a United States patent, and
MOTOROLA will pay those costs and damages finally awarded against the end user purchaser in
any such suit which are attributable to any such claim, but such defense and payments are
conditioned on the following:
A. that MOTOROLA will be notified promptly in writing by such purchaser of any notice of such
claim;
B. that MOTOROLA will have sole control of the defense of such suit and all negotiations for its
settlement or compromise; and
C. should the Product or parts become, or in MOTOROLA’s opinion be likely to become, the
subject of a claim of infringement of a United States patent, that such purchaser will permit
MOTOROLA, at its option and expense, either to procure for such purchaser the right to
continue using the Product or parts or to replace or modify the same so that it becomes
noninfringing or to grant such purchaser a credit for the Product or parts as depreciated and
accept its return. The depreciation will be an equal amount per year over the lifetime of the
Product or parts as established by MOTOROLA.
MOTOROLA will have no liability with respect to any claim of patent infringement which is based
upon the combination of the Product or parts furnished hereunder with software, apparatus or
devices not furnished by MOTOROLA, nor will MOTOROLA have any liability for the use of ancillary
equipment or software not furnished by MOTOROLA which is attached to or used in connection with
the Product. The foregoing states the entire liability of MOTOROLA with respect to infringement of
patents by the Product or any parts thereof.
Laws in the United States and other countries preserve for MOTOROLA certain exclusive rights for
copyrighted MOTOROLA software such as the exclusive rights to reproduce in copies and distribute
copies of such Motorola software. MOTOROLA software may be used in only the Product in which
the software was originally embodied and such software in such Product may not be replaced,
copied, distributed, modified in any way, or used to produce any derivative thereof. No other use
including, without limitation, alteration, modification, reproduction, distribution, or reverse
engineering of such MOTOROLA software or exercise of rights in such MOTOROLA software is
permitted. No license is granted by implication, estoppel or otherwise under MOTOROLA patent
rights or copyrights.
VII. Governing Law
This Warranty is governed by the laws of the State of Illinois, USA.
6881094C31-C
October 14, 2003
xvi
Commercial Warranty
Notes
October 14, 2003
6881094C31-C
Portable Radio Model Numbering System
xvii
Model Numbering, Charts, and Specifications
Portable Radio Model Numbering System
Typical Model Number: H
Position: 1
Position 1 - Type of Unit
H = Hand-Held Portable
10
11
12
13
14
15
16
Positions 13 - 16
SP Model Suffix
Position 12 Unique Model Variations
C = Cenelec
N = Standard Package
Positions 2 & 3 - Model Series
18 = XTS 5000
Position 4 - Frequency Band
A = Less than 29.7MHz
P =
B = 29.7 to 35.99MHz
Q=
C = 36 to 41.99MHz
R=
D = 42 to 50MHz
S =
F = 66 to 80MHz
T =
G = 74 to 90MHz
U=
H = Product Specific
V =
J = 136 to 162MHz
W=
K = 146 to 178MHz
Y =
L = 174 to 210MHz
Z =
M = 190 to 235MHz
336 to 410MHz
380 to 470MHz
438 to 482MHz
470 to 520MHz
Product Specific
764 to 870MHz
825 to 870MHz
896 to 941MHz
1.0 to 1.6GHz
1.5 to 2.0GHz
Values given represent range only; they are
not absolute.
Position 5 - Power Level
A = 0 to 0.7 Watts
B = 0.7 to 0.9 Watts
C = 1.0 to 3.9 Watts
D = 4.0 to 5.0 Watts
E = 5.1 to 6.0 Watts
F = 6.1 to 10 Watts
Position 6 - Physical Packages
A = RF Modem Operation
B = Receiver Only
C = Standard Control; No Display
D = Standard Control; With Display
E = Limited Keypad; No Display
F = Limited Keypad; With Display
G = Full Keypad; No Display
H = Full Keypad; With Display
J = Limited Controls; No Display
K = Limited Controls; Basic Display
L = Limited Controls; Limited Display
M = Rotary Controls; Standard Display
N = Enhanced Controls; Enhanced Display
P = Low Profile; No Display
Q = Low Profile; Basic Display
R = Low Profile; Basic Display, Full Keypad
Position 7 - Channel Spacing
1 = 5kHz
5 = 15kHz
2 = 6.25kHz 6 = 20/25kHz
3 = 10kHz
7 = 30kHz
4 = 12.5kHz 9 = Variable/Programmable
Position 11 - Version
Version Letter (Alpha) - Major Change
Position 10 - Feature Level
1 = Basic
6 = Standard Plus
2 = Limited Package 7 = Expanded Package
3 = Limited Plus
8 = Expanded Plus
4 = Intermediate
9 = Full Feature/
5 = Standard Package
Programmable
Position 9 - Primary System Type
A = Conventional
B = Privacy Plus
C = Clear SMARTNET
D = Advanced Conventional Stat-Alert
E = Enhanced Privacy Plus
F = Nauganet 888 Series
G = Japan Specialized Mobile Radio (JSMR)
H = Multi-Channel Access (MCA)
J = CoveragePLUS
K = MPT1327* - Public
L = MPT1327* - Private
M = Radiocom
N = Tone Signalling
P = Binary Signalling
Q = Phonenet
W = Programmable
X = Secure Conventional
Y = Secure SMARTNET
* MPT = Ministry of Posts and Telecommunications
Position 8 - Primary Operation
A = Conventional/Simplex
B = Conventional/Duplex
C = Trunked Twin Type
D = Dual Mode Trunked
E = Dual Mode Trunked/Duplex
F = Trunked Type I
G = Trunked Type II
H = FDMA* Digital Dual Mode
J = TDMA** Digital Dual Mode
K = Single Sideband
L = Global Positioning Satellite Capable
M = Amplitude Companded Sideband (ACSB)
P = Programmable
* FDMA = Frequency Division Multiple Access
** TDMA = Time Division Multiple Access
MAEPF-27620-O
6881094C31-C
October 14, 2003
xviii
Portable Radio Model Numbering System
ASTRO XTS 5000 VHF Model Chart
MODEL NUMBER
H18KEC9PW5AN
H18KEF9PW6AN
H18KEH9PW7AN
ITEM NUMBER
NLD8910_
NNTN4563_ or,
NNTN4717_
—
—
NTN9682_
NTN9681_
NTN9680_
—
0985973B02
1505579Z01
2685567D01
2685567D02
2685567D03
2685220D08
2785219D01
2885866A01
3285900E01
3205349Z03
3205351Z02
3285877B02
3385873B01
7285726C02
7585189D01
7585936D02
7585139E01
7585104D02
7585104D01
DESCRIPTION
VHF 1-6 Watts ASTRO XTS 5000 Model I
VHF 1-6 Watts ASTRO XTS 5000 Model II
VHF 1-6 Watts ASTRO XTS 5000 Model III
DESCRIPTION
Board, Transceiver (VHF)
Board, VOCON*
Board, VOCON*
Belt Clip Kit (Refer to the Basic Service Manual accessories appendix)
Battery (Refer to Table 2-1 and Table 2-2 on page 2-1)
Kit, Front Cover, Model I
Kit, Front Cover, Model II
Kit, Front Cover, Model III
Antenna, VHF (Refer to the Basic Service Manual accessories appendix)
Assembly, B+ Connector
Cover, Accessory Connector
Assembly, VOCON Shield, Model I
Assembly, VOCON Shield-Keypad, Model II
Assembly, VOCON Shield-Keypad, Model III
Shield, RF (Transceiver) Board
Assembly, Casting
Connector, Compression, 26-Pin
Gasket, Antenna O-Ring
Seal, Main
Seal, B+
Seal, Port
Label, Port
Module, LCD Display
Pad, Display Locator
Pad, RF
Pad, Battery holder
Keypad, Model II
Keypad, Model III
Notes:
X =Item Included
* =The radio’s model number, FLASHcode, Host code, and DSP code are required when placing an order for the VOCON Board.
• The model number and (sometimes) the FLASHcode can be found on the FCC label on the back of the radio.
• The model number, Host code, DSP code, and (sometimes) the FLASHcode can be found by putting a Model II or III
radio into the Test Mode.
• The model number, Host code, DSP code, and FLASHcode can be found by using the Programming Cable (RKN4105_ or
RKN4106_) and the CPS to read a Model I, II, or III radio.
October 14, 2003
6881094C31-C
Portable Radio Model Numbering System
xix
ASTRO XTS 5000 R (Ruggedized) VHF Model Chart
MODEL NUMBER
H18KEC9PW5AN w/Q155FE Opt
H18KEF9PW6AN w/Q155FF Opt
H18KEH9PW7AN w/Q155FG Opt
H18KEC9PW5AN w/Q155FS Opt
H18KEF9PW6AN w/Q155FT Opt
H18KEH9PW7AN w/Q155FU Opt
ITEM NUMBER
NLD8910_
NNTN4563_ or,
NNTN4717_
—
—
NNTN4059_
NNTN4060_
NNTN4061_
NTN9685_
NTN9684_
NTN9683_
—
0985973B02
1505579Z01
2685567D01
2685567D02
2685567D03
2685220D08
2785219D04
2885866A01
3285900E01
3205349Z03
3205351Z02
3285877B02
3385873B01
7285726C02
7585189D01
7585936D02
7585139E01
3285688D01
7585104D02
7585104D01
DESCRIPTION
Ruggedized VHF 1-6 Watts ASTRO XTS 5000 Model I
Ruggedized VHF 1-6 Watts ASTRO XTS 5000 Model II
Ruggedized VHF 1-6 Watts ASTRO XTS 5000 Model III
Ruggedized Yellow VHF 1-6 Watts ASTRO XTS 5000 Model I
Ruggedized Yellow VHF 1-6 Watts ASTRO XTS 5000 Model II
Ruggedized Yellow VHF 1-6 Watts ASTRO XTS 5000 Model III
DESCRIPTION
Board, Transceiver (VHF)
Board, VOCON*
Board, VOCON*
Belt Clip Kit (Refer to the Basic Service Manual accessories appendix)
Battery (Refer to Table 2-1 and Table 2-2 on page 2-1)
Kit, Front Cover, Model I, Ruggedized
Kit, Front Cover, Model II, Ruggedized
Kit, Front Cover, Model III, Ruggedized
Kit, Yellow Front Cover, Model I, Ruggedized
Kit, Yellow Front Cover, Model II, Ruggedized
Kit, Yellow Front Cover, Model III, Ruggedized
Antenna, VHF (Refer to the Basic Service Manual accessories appendix)
Assembly, B+ Connector
Cover, Accessory Connector
Assembly, VOCON Shield, Model I
Assembly, VOCON Shield-Keypad, Model II
Assembly, VOCON Shield-Keypad, Model III
Shield, RF (Transceiver) Board
Assembly, Ruggedized Casting
Connector, Compression, 26-Pin
Gasket, Antenna O-Ring
Seal, Main
Seal, B+
Seal, Port
Label, Port
Module, LCD Display
Pad, Display Locator
Pad, RF
Pad, Battery holder
Plug, Vacuum test port
Keypad, Model II
Keypad, Model III
Notes:
X =Item Included
* =The radio’s model number, FLASHcode, Host code, and DSP code are required when placing an order for the VOCON Board.
• The model number and (sometimes) the FLASHcode can be found on the FCC label on the back of the radio.
• The model number, Host code, DSP code, and (sometimes) the FLASHcode can be found by putting a Model II or III
radio into the Test Mode.
• The model number, Host code, DSP code, and FLASHcode can be found by using the Programming Cable (RKN4105_ or
RKN4106_) and the CPS to read a Model I, II, or III radio.
6881094C31-C
October 14, 2003
xx
Portable Radio Model Numbering System
ASTRO XTS 5000 UHF Range 1 Model Chart
MODEL NUMBER
H18QDC9PW5AN
H18QDF9PW6AN
H18QDH9PW7AN
H18QCC9PW5AN
H18QCF9PW6AN
H18QCH9PW7AN
ITEM NUMBER
NLE4272_
NLE4278_
NNTN4819_ or,
NNTN4717_
—
—
NTN9682_
NTN9681_
NTN9680_
—
0985973B02
1505579Z01
2685567D01
2685567D02
2685567D03
2685220D08
2785219D01
2885866A01
3285900E01
3205349Z03
3205351Z02
3285877B02
3385873B01
7285726C03
7585189D01
7585936D04
7585139E01
7585104D02
7585104D01
DESCRIPTION
UHF Range 1, 1-5 Watts ASTRO XTS 5000 Model I
UHF Range 1, 1-5 Watts ASTRO XTS 5000 Model II
UHF Range 1, 1-5 Watts ASTRO XTS 5000 Model III
UHF Range 1, Low Power, 20 mW - 2 Watts ASTRO XTS 5000 Model I
UHF Range 1, Low Power, 20 mW - 2 Watts ASTRO XTS 5000 Model II
UHF Range 1, Low Power, 20 mW - 2 Watts ASTRO XTS 5000 Model III
DESCRIPTION
Board, Transceiver (UHF)
Board, Transceiver (UHF) Low Power
Board, VOCON*
Board, VOCON*
Belt Clip Kit (Refer to the Basic Service Manual accessories appendix)
Battery (Refer to Table 2-1 and Table 2-2 on page 2-1)
Kit, Front Cover, Model I
Kit, Front Cover, Model II
Kit, Front Cover, Model III
Antenna, UHF (Refer to the Basic Service Manual accessories appendix)
Assembly, B+ Connector
Cover, Accessory Connector
Assembly, VOCON Shield, Model I
Assembly, VOCON Shield-Keypad, Model II
Assembly, VOCON Shield-Keypad, Model III
Shield, RF (Transceiver) Board
Assembly, Casting
Connector, Compression, 26-Pin
Gasket, Antenna O-Ring
Seal, Main
Seal, B+
Seal, Port
Label, Port
Module, LCD Display
Pad, Display Locator
Pad, RF
Pad, Battery holder
Keypad, Model II
Keypad, Model III
Notes:
X =Item Included
* =The radio’s model number, FLASHcode, Host code, and DSP code are required when placing an order for the VOCON Board.
• The model number and (sometimes) the FLASHcode can be found on the FCC label on the back of the radio.
• The model number, Host code, DSP code, and (sometimes) the FLASHcode can be found by putting a Model II or III
radio into the Test Mode.
• The model number, Host code, DSP code, and FLASHcode can be found by using the Programming Cable (RKN4105_ or
RKN4106_) and the CPS to read a Model I, II, or III radio.
October 14, 2003
6881094C31-C
Portable Radio Model Numbering System
xxi
ASTRO XTS 5000 R (Ruggedized) UHF Range 1 Model Chart
MODEL NUMBER
H18QDC9PW5AN w/Q155FE Opt
H18QDF9PW6AN w/Q155FF Opt
H18QDH9PW7AN w/Q155FG Opt
H18QDC9PW5AN w/Q155FS Opt
H18QDF9PW6AN w/Q155FT Opt
H18QDH9PW7AN w/Q155FU Opt
H18QCC9PW5AN wQ155HW Opt
H18QCF9PW6AN wQ155HX Opt
H18QCH9PW7AN wQ155HY Opt
ITEM NUMBER
NLE4272_
NLE4278_
NNTN4819_ or,
NNTN4717_
—
—
NNTN4059_
NNTN4060_
NNTN4061_
NTN9685_
NTN9684_
NTN9683_
—
0985973B02
1505579Z01
2685567D01
2685567D02
2685567D03
2685220D08
2785219D04
2885866A01
3285900E01
3205349Z03
3205351Z02
3285877B02
3385873B01
7285726C03
7585189D01
7585936D04
7585139E01
3285688D01
7585104D02
7585104D01
DESCRIPTION
Ruggedized UHF Range 1, 1-5 Watts ASTRO XTS 5000 Model I
Ruggedized UHF Range 1, 1-5 Watts ASTRO XTS 5000 Model II
Ruggedized UHF Range 1, 1-5 Watts ASTRO XTS 5000 Model III
Ruggedized Yellow UHF Range 1, 1-5 Watts ASTRO XTS 5000 Model I
Ruggedized Yellow UHF Range 1, 1-5 Watts ASTRO XTS 5000 Model II
Ruggedized Yellow UHF Range 1, 1-5 Watts ASTRO XTS 5000 Model III
Ruggedized UHF R1, Low Pwr, 20 mW-2 Watts ASTRO XTS 5000 Model I
Ruggedized UHF R1, Low Pwr, 20 mW-2 Watts ASTRO XTS 5000 Model II
Ruggedized UHF R1, Low Pwr, 20 mW-2 Watts ASTRO XTS 5000 Model III
DESCRIPTION
Board, Transceiver (UHF)
Board, Transceiver (UHF) Low Power
Board, VOCON*
Board, VOCON*
Belt Clip Kit (Refer to the Basic Service Manual accessories appendix)
Battery (Refer to Table 2-1 and Table 2-2 on page 2-1)
Kit, Front Cover, Model I, Ruggedized
Kit, Front Cover, Model II, Ruggedized
Kit, Front Cover, Model III, Ruggedized
Kit, Yellow Front Cover, Model I, Ruggedized
Kit, Yellow Front Cover, Model II, Ruggedized
Kit, Yellow Front Cover, Model III, Ruggedized
Antenna, UHF (Refer to the Basic Service Manual accessories appendix)
Assembly, B+ Connector
Cover, Accessory Connector
Assembly, VOCON Shield, Model I
Assembly, VOCON Shield-Keypad, Model II
Assembly, VOCON Shield-Keypad, Model III
Shield, RF (Transceiver) Board
Assembly, Ruggedized Casting
Connector, Compression, 26-Pin
Gasket, Antenna O-Ring
Seal, Main
Seal, B+
Seal, Port
Label, Port
Module, LCD Display
Pad, Display Locator
Pad, RF
Pad, Battery holder
Plug, Vacuum test port
Keypad, Model II
Keypad, Model III
Notes:
X =Item Included
* =The radio’s model number, FLASHcode, Host code, and DSP code are required when placing an order for the VOCON Board.
• The model number and (sometimes) the FLASHcode can be found on the FCC label on the back of the radio.
• The model number, Host code, DSP code, and (sometimes) the FLASHcode can be found by putting a Model II or III
radio into the Test Mode.
• The model number, Host code, DSP code, and FLASHcode can be found by using the Programming Cable (RKN4105_ or
RKN4106_) and the CPS to read a Model I, II, or III radio.
6881094C31-C
October 14, 2003
xxii
Portable Radio Model Numbering System
ASTRO XTS 5000 700–800 MHz Model Chart
MODEL NUMBER
H18UCC9PW5AN
H18UCF9PW6AN
H18UCH9PW7AN
ITEM NUMBER
NUF3577_
NTN9564_ or,
NNTN4717_
—
—
NTN9682_
NTN9681_
NTN9680_
—
0985973B02
1505579Z01
2685567D01
2685567D02
2685567D03
2685220D08
2785219D01
2885866A01
3285900E01
3205349Z03
3205351Z02
3285877B02
3385873B01
7285726C01 or,
7285726C02
7585189D01
7585936D04
7585139E01
7585104D02
7585104D01
DESCRIPTION
700/800 MHz 1-3 Watts ASTRO XTS 5000 Model I
700/800 MHz 1-3 Watts ASTRO XTS 5000 Model II
700/800 MHz 1-3 Watts ASTRO XTS 5000 Model III
DESCRIPTION
Board, Transceiver (700/800 MHz)
Board, VOCON*
Board, VOCON*
Belt Clip Kit (Refer to the Basic Service Manual accessories appendix)
Battery (Refer to Table 2-1 and Table 2-2 on page 2-1)
Kit, Front Cover, Model I
Kit, Front Cover, Model II
Kit, Front Cover, Model III
Antenna, 700/800 MHz (Refer to the Basic Service Manual accessories appendix)
Assembly, B+ Connector
Cover, Accessory Connector
Assembly, VOCON Shield, Model I
Assembly, VOCON Shield-Keypad, Model II
Assembly, VOCON Shield-Keypad, Model III
Shield, RF (Transceiver) Board
Assembly, Casting
Connector, Compression, 26-Pin
Gasket, Antenna O-Ring
Seal, Main
Seal, B+
Seal, Port
Label, Port
Module, LCD Display (for use only with the NTN9564_VOCON board)
Module, LCD Display (for use only with the NNTN4717_VOCON board)
Pad, Display Locator
Pad, RF
Pad, Battery holder
Keypad, Model II
Keypad, Model III
Notes:
X =Item Included
* =The radio’s model number, FLASHcode, Host code, and DSP code are required when placing an order for the VOCON Board.
• The model number and (sometimes) the FLASHcode can be found on the FCC label on the back of the radio.
• The model number, Host code, DSP code, and (sometimes) the FLASHcode can be found by putting a Model II or III
radio into the Test Mode.
• The model number, Host code, DSP code, and FLASHcode can be found by using the Programming Cable (RKN4105_ or
RKN4106_) and the CPS to read a Model I, II, or III radio.
October 14, 2003
6881094C31-C
Portable Radio Model Numbering System
xxiii
ASTRO XTS 5000 R (Ruggedized) 700–800 MHz Model Chart
MODEL NUMBER
H18UCC9PW5AN w/Q155FP Opt
H18UCF9PW6AN w/Q155FQ Opt
H18UCH9PW7AN w/Q155FR Opt
H18UCC9PW5AN w/Q155GB Opt
H18UCF9PW6AN w/Q155GC Opt
H18UCH9PW7AN w/Q155GD Opt
ITEM NUMBER
NUF3577_
NTN9564_ or,
NNTN4717_
—
—
NNTN4059_
NNTN4060_
NNTN4061_
NTN9685_
NTN9684_
NTN9683_
—
0985973B02
1505579Z01
2685567D01
2685567D02
2685567D03
2685220D08
2785219D04
2885866A01
3285900E01
3205349Z03
3205351Z02
3285877B02
3385873B01
7285726C01 or,
7285726C02
7585189D01
7585936D04
7585139E01
3285688D01
7585104D02
7585104D01
DESCRIPTION
Ruggedized 700/800 MHz 1-3 Watts ASTRO XTS 5000 Model I
Ruggedized 700/800 MHz 1-3 Watts ASTRO XTS 5000 Model II
Ruggedized 700/800 MHz 1-3 Watts ASTRO XTS 5000 Model III
Ruggedized Yellow 700/800 MHz 1-3 Watts ASTRO XTS 5000 Model I
Ruggedized Yellow 700/800 MHz 1-3 Watts ASTRO XTS 5000 Model II
Ruggedized Yellow 700/800 MHz 1-3 Watts ASTRO XTS 5000 Model III
DESCRIPTION
Board, Transceiver (700/800 MHz)
Board, VOCON*
Board, VOCON*
Belt Clip Kit (Refer to the Basic Service Manual accessories appendix)
Battery (Refer to Table 2-1 and Table 2-2 on page 2-1)
Kit, Front Cover, Model I, Ruggedized
Kit, Front Cover, Model II, Ruggedized
Kit, Front Cover, Model III, Ruggedized
Kit, Yellow Front Cover, Model I, Ruggedized
Kit, Yellow Front Cover, Model II, Ruggedized
Kit, Yellow Front Cover, Model III, Ruggedized
Antenna, 700/800 MHz (Refer to the Basic Service Manual accessories
appendix)
Assembly, B+ Connector
Cover, Accessory Connector
Assembly, VOCON Shield, Model I
Assembly, VOCON Shield-Keypad, Model II
Assembly, VOCON Shield-Keypad, Model III
Shield, RF (Transceiver) Board
Assembly, Ruggedized Casting
Connector, Compression, 26-Pin
Gasket, Antenna O-Ring
Seal, Main
Seal, B+
Seal, Port
Label, Port
Module, LCD Display (for use only with the NTN9564_VOCON board)
Module, LCD Display (for use only with the NNTN4717_VOCON board)
Pad, Display Locator
Pad, RF
Pad, Battery holder
Plug, Vacuum test port
Keypad, Model II
Keypad, Model III
Notes:
X =Item Included
* =The radio’s model number, FLASHcode, Host code, and DSP code are required when placing an order for the VOCON Board.
• The model number and (sometimes) the FLASHcode can be found on the FCC label on the back of the radio.
• The model number, Host code, DSP code, and (sometimes) the FLASHcode can be found by putting a Model II or III
radio into the Test Mode.
• The model number, Host code, DSP code, and FLASHcode can be found by using the Programming Cable (RKN4105_ or
RKN4106_) and the CPS to read a Model I, II, or III radio.
6881094C31-C
October 14, 2003
xxiv
Portable Radio Model Numbering System
Specifications for VHF Radios
All specifications are per Telecommunications Industries Association TIA-603 unless otherwise
noted.
GENERAL
FCC Designation:
Temperature Range:
Operating:
Storage:
RECEIVER
AZ489FT3804
–30°C to +60°C
–40°C to +85°C
Power Supply: Nickel-Cadmium Battery (NiCd)
or Nickel-Metal-Hydride Battery (NiMH)
or Lithium-Ion Battery (Li-Ion)
Frequency Range:
Bandwidth:
Usable Sensitivity (typical)
(12 dB SINAD):
Intermodulation (typical):
TRANSMITTER
136-174 MHz
38 MHz
0.20 µV
Frequency Range:
136-174 MHz
RF Power:
136-174 MHz:
1-6 Watts
Frequency Stability (typical)
(–30 to +60°C; 25°C ref.):
±0.0002%
–75 dB
Emission (typical conducted):
Battery Voltage:
Nominal:
Range:
7.5 Vdc
6 to 9 Vdc
Transmit Current Drain (Typical):
2100 mA
Receive Current Drain (Rated Audio): 240 mA
Standby Current Drain:
80 mA
Recommended Battery:
Smart NiMH:
NNTN4435_
or Ultra-HIgh-Capacity NiCd:
NTN8294_
or Extended-Capacity NiMH:
NTN8293_
or Li-Ion:
NTN8610_
or Ultra–High-Capacity NiCd FM: NTN8295_*
or Ultra–High-Capacity NiMH FM: NTN8299_*
Optional FM (Factory Mutual) Battery:
* FM Intrinsically Safe: Class I, II, III, Division 1,
Groups C, D,E, F, and G. FM Non-incendive:
Class 1, Division 2, Groups A, B, C, and D.
Selectivity (typical):
(25/30 kHz Channel):
(12.5 kHz Channel):
–75 dB
–63 dB
Spurious Rejection (typical):
–75 dB
FM Hum and Noise (typical)
(Companion Receiver):
Distortion (typical):
Frequency Stability
(–30+60°C; 25°C reference):
Rated Audio:
±0.0002%
Modulation Limiting:
ACPR (typical):
25 kHz –55 dB
12.5 kHz –49 dB
Channel Spacing:
25 kHz –48 dB
12.5 kHz –42 dB
1.0% (typical)
25 kHz chnls ±5.0 kHz
12.5 kHz chnls ±2.5 kHz
500 mW
FM Hum and Noise (typical):
Distortion (typical):
–75 dBc
1.5%
25 kHz –73 dBc
12.5 kHz –63 dBc
Emissions Designators:
20K0F1E, 16K0F3E, 11K0F3E, 8K10F1D, and
8K10F1E
12.5/25 kHz
Dimensions (H x W x D):
Note: 2.44" = width at PTT; 2.34" = width at
bottom; 1.83" = depth at speaker; 0.97" = depth
at keypad
Without Battery (Radio Only):
6.58" x 2.44" x 1.83"/6.58" x 2.34" x 0.97"
(167.13 mm x 61.90 mm x 46.42 mm/
167.13 mm x 59.49 mm x 24.56 mm)
With Battery:
6.58" x 2.44" x 1.83"/6.58" x 2.34" x 1.65"
(167.13 mm x 61.90 mm x 46.42 mm/
167.13 mm x 59.49 mm x 41.97 mm)
Weight: (w/ Antenna):
Less Battery:
14.10 oz (383 gm)
With Ultra-High Cap. NiCd: 25.19 oz (693 gm)
With Li-Ion:
20.41 oz (583 gm)
With Ultra-High Cap. NiMH:23.45 oz (644 gm)
With Extended- Cap. NiMH:24.04 oz (682 gm)
Specifications subject to change without notice.
October 14, 2003
6881094C31-C
Portable Radio Model Numbering System
xxv
Specifications for UHF Range 1 Radios
All specifications are per Telecommunications Industries Association TIA-603 unless otherwise
noted.
GENERAL
FCC Designation:
Temperature Range:
Operating:
Storage:
RECEIVER
AZ489FT4855
–30°C to +60°C
–40°C to +85°C
Frequency Range:
Bandwidth:
Usable Sensitivity (typical)
(12 dB SINAD):
TRANSMITTER
380-470 MHz
90 MHz
0.25 µV
Power Supply: Nickel-Cadmium Battery (NiCd)
or Nickel-Metal-Hydride Battery (NiMH)
or Lithium-Ion Battery (Li-Ion)
Intermodulation (typical):
Battery Voltage:
Nominal:
Range:
Selectivity (typical):
(25/30 kHz Channel):
(12.5 kHz Channel):
–78 dB
–60 dB
Spurious Rejection (typical):
–80 dB
Frequency Range:
380-470 MHz
RF Power:
380-470 MHz:
1-5 Watts
Frequency Stability (typical)
(–30 to +60°C; 25°C ref.):
±0.0002%
–75 dB
Emission (typical conducted):
7.5 Vdc
6 to 9 Vdc
Transmit Current Drain (Typical):
2100 mA
Receive Current Drain (Rated Audio): 240 mA
Standby Current Drain:
80 mA
Recommended Battery:
Smart NiMH:
NNTN4435
or Ultra-HIgh-Capacity NiCd:
NTN8294
or Extended-Capacity NiMH:
NTN8293
or Li-Ion:
NTN8610
or Ultra–High-Capacity NiCd FM:
NTN8295*
or Ultra–High-Capacity NiMH FM:
NTN8299*
Optional FM (Factory Mutual) Battery:
* FM Intrinsically Safe.
FM Hum and Noise (typical)
(Companion Receiver):
Distortion (typical):
Frequency Stability
(–30+60°C; 25°C reference):
Rated Audio:
±0.0002%
Modulation Limiting:
ACPR (typical):
25 kHz –54 dB
12.5 kHz –45 dB
Channel Spacing:
25 kHz –45 dB
12.5 kHz –40 dB
1.5% (typical)
25 kHz chnls ±5.0 kHz
12.5 kHz chnls ±2.5 kHz
500 mW
FM Hum and Noise (typical):
Distortion (typical):
–70 dBc
1.0%
25 kHz –77 dBc
12.5 kHz –62 dBc
Emissions Designators:
20K0F1E, 16K0F3E, 11K0F3E, 8K10F1D, and
8K10F1E
12.5/25 kHz
Dimensions (H x W x D):
Note: 2.44" = width at PTT; 2.34" = width at
bottom; 1.83" = depth at speaker; 0.97" = depth
at keypad
Without Battery (Radio Only):
6.58" x 2.44" x 1.83"/6.58" x 2.34" x 0.97"
(167.13 mm x 61.90 mm x 46.42 mm/
167.13 mm x 59.49 mm x 24.56 mm)
With Battery:
6.58" x 2.44" x 1.83"/6.58" x 2.34" x 1.65"
(167.13 mm x 61.90 mm x 46.42 mm/
167.13 mm x 59.49 mm x 41.97 mm)
Weight: (w/ Antenna):
Less Battery:
14.10 oz (383 gm)
With Ultra-High Cap. NiCd: 25.19 oz (693 gm)
With Li-Ion:
20.41 oz (583 gm)
With Ultra-High Cap. NiMH:23.45 oz (644 gm)
With Extended- Cap. NiMH:24.04 oz (682 gm)
Specifications subject to change without notice.
6881094C31-C
October 14, 2003
xxvi
Portable Radio Model Numbering System
Specifications for 700–800 MHz Radios
All specifications are per Telecommunications Industries Association TIA-603 unless otherwise
noted.
GENERAL
FCC Designation:
Temperature Range:
Operating:
Storage:
AZ489FT5806
–30°C to +60°C
–40°C to +85°C
RECEIVER
TRANSMITTER
Frequency Range:
700 MHz:
764 to 767; 773 to 776 MHz
800 MHz:
851 to 870 MHz
Frequency Range:
700 MHz: 764 to 767; 773 to 776; 794 to 797;
803 to 806 MHz
800 MHz:
806 to 824; 851 to 870 MHz
Bandwidth:
Power Supply: Nickel-Cadmium Battery (NiCd)
or Nickel-Metal-Hydride Battery (NiMH)
or Lithium-Ion Battery (Li-Ion)
Battery Voltage:
Nominal:
Range:
Usable Sensitivity (typical)
(12 dB SINAD):
Intermodulation (typical):
7.5 Vdc
6 to 9 Vdc
Transmit Current Drain (Typical):
1400 mA
Receive Current Drain (Rated Audio): 240 mA
Standby Current Drain:
80 mA
Recommended Battery:
Ultra-HIgh-Capacity Smart NiCd: HNN9031_
or Ultra-HIgh-Capacity NiCd:
NTN8294_
or Extended-Capacity NiMH:
NTN8293_
or Li-Ion:
NTN8610_
or Ultra–High-Capacity NiCd FM: NTN8295_*
or Ultra–High-Capacity NiMH FM: NTN8299_*
Optional FM (Factory Mutual) Battery:
* FM Intrinsically Safe: Class I, II, III, Division 1,
Groups C, D,E, F, and G. FM Non-incendive:
Class 1, Division 2, Groups A, B, C, and D.
106 MHz
0.20 µV
–75 dB
Selectivity (typical):
(25/30 kHz Channel):
(12.5 kHz Channel):
–72 dB
–63 dB
Spurious Rejection (typical):
–75 dB
Frequency Stability
(–30+60°C; 25°C reference):
Rated Audio:
±0.00015%
500 mW
RF Power:
764-806 MHz:
806-870 MHz:
2.5 Watts
3 Watts
Frequency Stability (typical)
(–30 to +60°C; 25°C ref.):
±0.00015%
Emission (typical conducted):
FM Hum and Noise (typical)
(Companion Receiver):
Distortion (typical):
Modulation Limiting:
–75 dBc
25 kHz –45 dB
12.5 kHz –40 dB
1.5% (typical)
25 kHz chnls ±5.0 kHz
12.5 kHz chnls ±2.5 kHz
FM Hum and Noise (typical):
25 kHz –48 dB
12.5 kHz –40 dB
Distortion (typical):
Channel Spacing:
Emissions Designators:
20K0F1E, 16K0F3E, 11K0F3E, 8K10F1D, and
8K10F1E
1.5%
12.5/25 kHz
Dimensions (H x W x D):
Note: 2.44" = width at PTT; 2.34" = width at
bottom; 1.83" = depth at speaker; 0.97" = depth
at keypad
Without Battery (Radio Only):
6.58" x 2.44" x 1.83"/6.58" x 2.34" x 0.97"
(167.13 mm x 61.90 mm x 46.42 mm/
167.13 mm x 59.49 mm x 24.56 mm)
With Battery:
6.58" x 2.44" x 1.83"/6.58" x 2.34" x 1.65"
(167.13 mm x 61.90 mm x 46.42 mm/
167.13 mm x 59.49 mm x 41.97 mm)
Weight: (w/ Antenna):
Less Battery:
14.10 oz (383 gm)
With Ultra-High Cap. NiCd: 25.19 oz (693 gm)
With Li-Ion:
20.41 oz (583 gm)
With Ultra-High Cap. NiMH:23.45 oz (644 gm)
With Extended- Cap. NiMH:24.04 oz (682 gm)
Specifications subject to change without notice.
October 14, 2003
6881094C31-C
Chapter 1 Introduction
1.1
General
This manual includes all the information needed to maintain peak product performance and
maximum working time for the ASTRO XTS 5000 radio. This detailed level of service (component
level) is typical of the service performed by some service centers, self-maintained customers, and
distributors.
Use this manual in conjunction with the ASTRO XTS 5000 VHF/UHF Range 1/700–800 MHz Digital
Portable Radios Basic Service Manual (Motorola part number 6881094C28), which can help in
troubleshooting a problem to a particular printed circuit (PC) board.
Conduct the basic performance checks outlined in the basic service manual first to verify the need to
analyze the radio and to help pinpoint the functional problem area. In addition, you will become
familiar with the radio test mode of operation, which is a helpful tool. If any basic receive or transmit
parameters fail to be met, the radio should be aligned according to the radio alignment procedure.
Included in other areas of this manual are functional block diagrams, detailed theory of operation,
troubleshooting charts and waveforms, schematics, and parts lists. You should become familiar with
these sections to aid in determining circuit problems. Also included are component location diagrams
to aid in locating individual circuit components and some IC diagrams, which identify some
convenient probe points.
“Chapter 3, Theory of Operation,” on page 3-1, contains detailed descriptions of the operations of
many circuits. Once you locate the problem area, review the troubleshooting flowchart for that circuit
to fix the problem.
1-2
1.2
Introduction: Notations Used in This Manual
Notations Used in This Manual
Throughout the text in this publication, you will notice the use of warnings, cautions, and notes.
These notations are used to emphasize that safety hazards exist, and care must be taken and
observed.
NOTE: An operational procedure, practice, or condition that is essential to emphasize.
CAUTION indicates a potentially hazardous situation which, if
not avoided, might result in equipment damage.
Caution
WARNING indicates a potentially hazardous situation
which, if not avoided, could result in death or injury.
WARNING
DANGER
October 14, 2003
DANGER indicates an imminently hazardous
situation which, if not avoided, will result in death or
injury.
6881094C31-C
Chapter 2 Radio Power
This chapter provides a detailed circuit description of the power distribution of an ASTRO XTS 5000
radio.
2.1
General
In the ASTRO XTS 5000 radio, power (B+) is distributed to two boards: the transceiver (RF) board
and the VOCON board (see Figure 2-1 on page 2-2 for UHF Range 1 (R1) and 700–800 MHz, and
Figure 2-2 on page 2-2 for VHF). In the case of a secure model radio, B+ is also supplied to the
encryption module.
Power for the radio is provided through a battery supplying a nominal 7.5 Vdc directly to the
transceiver. The following battery types and capacities are available:
Table 2-1. Conventional Batteries
Part Number
Description
NTN8294
1525 NiCd, Ultra-High Capacity
NTN8295
1525 NiCd High-Capacity Factory Mutual (FM) Intrinsically Safe
NTN8297
1525 NiCd High-Capacity Factory Mutual (FM) Intrinsically Safe,
Rugged
NTN8299
1750 NiMH Ultra-Capacity FM
NTN8610
1650 Lithium Ion
NTN8923
1800 NiMH Ultra-Capacity
NTN9177
Battery Holder, Clamshell, Black
NTN9183
Battery Holder, Clamshell, Orange
RNN4006
3000 NiMH
RNN4007
3000 NiMH FM
Table 2-2. Smart Batteries
Part Number
Description
HNN9031
1525 NiCd Smart
HNN9032
1525 NiCd Smart FM
NNTN4435_R
1800 mAh, NiMH Smart
NNTN4436
1750 NiMH Smart FM (VHF use only)
2-2
Radio Power: General
Battery
RF Board
J1 BATT
FB+ P1 P201
Fuse
RAW B+
UNSW_B+
FET
V5A
SW_B+
GCAP II
1.875 Volts
(VSW2)
1.55V
3VA
3 Volts
Analog Circuits
5 Volts
VCC5
3.8 V (VSW1)
5 Volts
SW_B+
(control signal)
7.5 Volts
(Nominal)
VOCON Board
3 Volts
Digital Circuits
3 Volts 3 Volts
(VREF) (V2)
1.55 Volts
(VSW_1.55)
MAEPF-27419-A
Figure 2-1. DC Power Distribution—UHF Range 1 and 700–800 MHz Radios
RF Board
Battery
J1 BATT
VOCON Board
FB+ P1 P201
Fuse
UNSW_B+
5 Volts
VCC5
V5A
RAW B+
5 Volts
V3A
SW_B+
(control signal)
FET
SW_B+
3.8 V (VSW1)
3 Volts
Analog Circuits
GCAP II
7.5 Volts
(Nominal)
V3B
3 Volts
Misc. Supply
V3D
3 Volts
Digital Circuits
1.55V
1.55 Volts
(VSW_1.55)
1.875 Volts
(VSW2)
3 Volts 3 Volts
(VREF) (V2)
MAEPF-27520-A
Figure 2-2. DC Power Distribution—VHF Radios
B+ from the battery is electrically switched to most of the radio, rather than routed through the On/
Off/volume control knob, S1. The electrical switching of B+ supports a keep-alive mode. Under
software control, even when the On/Off/volume control knob has been turned to the Off position,
power remains on until the MCU completes its power-down, at which time the radio is physically
powered down.
October 14, 2003
6881094C31-C
Radio Power: DC Power Routing—Transceiver Board
2.2
2-3
DC Power Routing—Transceiver Board
NOTE: Refer to Table 8-1, “List of Transceiver Schematics and Board Overlays,” on page 8-1 for a
listing of schematics showing the transceiver board DC power routing components.
Connector J1, the B-plus assembly, connects the battery to the transceiver board. Capacitors C1,
C2, and C3 provide protection against momentary breaks at the B-plus connector due to contact
bounce when the radio is dropped.
UHF R1 and 700–800 MHz: Components C5, E4, C7, and E1 form a power-line filter for signal
RAWB+, which supplies battery voltage to the transmitter PA.
VHF: Component E1 forms a power-line filter for signal RAWB+, which supplies battery voltage to
the transmitter PA.
Transistor Q1, controlled by signal SWB+ (SB+ for VHF) from the VOCON board, turns on XB+,
which supplies to the 5-V linear regulator and TX_ALC block.
Fuse F901 and filter C11, L1, C10 (C14, L1, C13 for VHF) supply fused B-plus to the VOCON board.
In turn, the VOCON board supplies VSW1, regulated 3.8 Vdc, from the Global Control Audio and
Power (GCAP) switching regulator to the XCVR. Switch Q99 (Q503 for VHF), controlled by SWB+,
turns on V38 to the XCVR 3-V linear regulators. The XCVR regulated power supplies are
summarized in Table 2-3.
Table 2-3. Transceiver Voltage Regulators
2.3
Ref.
Desig.
IC
Name
Output
Signal Name
U1
LP2989
V5A
Regulated 5.0 Vdc
U2
LP3985
V3D
Regulated 3.0 Vdc digital
U3
LP3985
V3A
UHF R1 and 700–800 MHz: Regulated 3.0 Vdc
analog for the RX FE
VHF: Regulated 3.0 Vdc analog for synthesizer
U5
LP3985
V3B
VHF only: Regulated 3.0 Vdc miscellaneous
supply
Description
DC Power Routing—VOCON Board
NOTE: Refer to Table 8-2, “List of VOCON Schematics and Board Overlays,” on page 8-1 for a listing
of schematics showing the VOCON board DC power routing components.
Raw B+, or unswitched B+, (UNSW_B+) is routed to connector P1 on the transceiver board, and
then on to P201 on the VOCON board. Here the UNSW B+ is forwarded to the radio’s control top
On/Off/volume knob through connector J101 and a flex circuit, as well as to regulator U505 (VCC5).
The On/Off/volume knob controls B+SENSE to Q502, which in turn controls Q501. Transistor Q501
is a solid-state power switch that provides SW B+ to the VOCON board, the audio PA, the GCAP II
IC (via GCAP_B+), and back to the transceiver board.
In the case of a secure radio model, SW B+ and UNSW B+ are also supplied to the encryption
module through connector J701.
6881094C31-C
October 14, 2003
2-4
Radio Power: DC Power Routing—VOCON Board
Transistor Q501 is also under the control of the microcontroller unit (MCU) via Vref from U501. This
allows the MCU to follow an orderly power-down sequence when it senses that B+SENSE is off. This
sense is provided through MECH_SW_BAR (inverted B+SENSE, see Q508).
The digital circuits in the VOCON board are powered from regulators located in the GCAP II IC
(U501), an external 5 Vdc regulator (VCC5, U505), and an external 1.55 Vdc regulator (VSW_1.55V,
on NNTN4717 VOCON kit only). The GCAP II IC provides three supplies: VSW1, VSW2, and V2.
These regulators are software programmable. Table 2-4 lists the supply voltages and the circuits that
use these voltages.
Table 2-4. VOCON Board DC Power Distribution
Supply
Name
Output
Voltage
Supply Type
Unprogrammed
Output Voltage
UNSW_B+
9 to 6 Vdc
7.5 Vdc
nominal
Battery
N/A
VCC5 input
Mechanical switch
Power switch (FET)
Secure module
Real-time clock battery
SW_B+
9 to 6 Vdc
7.5 Vdc
nominal
Battery
N/A
VSW1 input (GCAP)
Audio power amplifier
Side connector
SW_B+ to transceiver board
GCAP IC
Secure module
USB circuitry
VCC5
5Vdc
Linear
Regulator
N/A
Smart battery circuitry
Int. / ext. microphone bias
Audio preamplifier
Flipper IC
Keypad / Display LEDs
VSW1
3.8 Vdc
Switching
regulator
software
progammable
3.2 Vdc
3-V regulators (RF)
VSW2 input
V2 input
VSW2
1.8 Vdc
Switching
regulator
software
progammable
2.2 Vdc
Patriot core
FLASH IC
SRAM
Display (only on NTN9564
VOCON board)
V2
3 Vdc*
2.9 Vdc**
Linear
regulator
software
progammable
2.775 Vdc
Patriot I/O ring
Flipper IC
EEPOT
Display
16.8 MHz buffer
VSW_1_55V
1.55 Vdc
Linear
regulator
N/A
Patriot core (only on
NNTN4717 VOCON board)
Circuits Supplied
* = NTN9564,NNTN4563 & NNTN4819 VOCON kits
** = NNTN4717 VOCON kit
October 14, 2003
6881094C31-C
Chapter 4 Troubleshooting Procedures
The purpose of this chapter is to aid in troubleshooting problems with the ASTRO XTS 5000 radio. It
is intended to be detailed enough to localize the malfunctioning circuit and isolate the defective
component. It also contains a listing of service tools recommended for PC board repair at the
component level.
Caution
4.1
Most of the ICs are static sensitive devices. Do not attempt to
disassemble the radio or troubleshoot a board without first
referring to the following Handling Precautions section.
Handling Precautions
Complementary metal-oxide semiconductor (CMOS) devices, and other high-technology devices,
are used in this family of radios. While the attributes of these devices are many, their characteristics
make them susceptible to damage by electrostatic discharge (ESD) or high-voltage charges.
Damage can be latent, resulting in failures occurring weeks or months later. Therefore, special
precautions must be taken to prevent device damage during disassembly, troubleshooting, and
repair. Handling precautions are mandatory for this radio, and are especially important in lowhumidity conditions. DO NOT attempt to disassemble the radio without observing the following
handling precautions.
1. Eliminate static generators (plastics, Styrofoam, etc.) in the work area.
2. Remove nylon or double-knit polyester jackets, roll up long sleeves, and remove or tie back
loose-hanging neckties.
3. Store and transport all static-sensitive devices in ESD-protective containers.
4. Disconnect all power from the unit before ESD-sensitive components are removed or inserted
unless otherwise noted.
5. Use a static-safeguarded workstation, which can be accomplished through the use of an antistatic kit (Motorola part number 01-80386A82). This kit includes a wrist strap, two ground
cords, a static-control table mat and a static-control floor mat.
4-2
4.2
Troubleshooting Procedures: Recommended Service Tools
Recommended Service Tools
Table 4-1 lists recommended service tools that can be used for PC board repairs at the component
level. For listings of additonal service tools, service aids, and test equipment that are recommended
for all levels of service, refer to the XTS 5000 basic service manual (see “ Related Publications” on
page xii).
Table 4-1. Recommended Service Tools
Motorola
Part Number
Description
Application
R1453
Digital-readout solder station
Digitally controlled soldering iron
RLN4062
Hot-air workstation, 120V
Tool for hot-air soldering/desoldering of
surface-mounted integrated circuits
0180386A78
Illuminated magnifying glass with
lens attachment
Illumination and magnification of
components
0180302E51
Master lens system
0180386A82
Anti-static grounding kit
6684253C72
Straight prober
6680384A98
Brush
1010041A86
Solder (RMA type), 63/67, 0.5 mm
diameter, 1 lb. spool
0180303E45
SMD tool kit (included with
R1319A)
R1319
ChipMaster (110V)
R1321
ChipMaster (220V)
Surface-mount removal and assembly of
surface-mounted integrated circuits and/or
rework station shields. Includes 5 nozzles.
R1364
Digital heated tweezer system
Chip component removal
R1427
Board preheater
Reduces heatsink on multi-level boards
6680309B53
Rework equipment catalog
Contains application notes, procedures,
and technical references used to rework
equipment
Used during all radio assembly and
disassembly procedures
ChipMaster Options:
6680370B54
0.710” x 0.710”
6680370B57
0.245” x 0.245”
6680370B58
0.340” x 0.340”
6680371B15
0.460” x 0.560”
October 14, 2003
Heat-focus heads for R1319 workstation
6881094C31-C
Troubleshooting Procedures: Voltage Measurement and Signal Tracing
4-3
Table 4-1. Recommended Service Tools (Continued)
Motorola
Part Number
Description
Application
ChipMaster Nozzles:
6680333E28
PA nozzle
6680332E83
PLCC-28* nozzle
6680332E93
PLCC-32 nozzle
6680332E82
PLCC-44* nozzle
6680332E94
PLCC-52 nozzle
6680332E95
PLCC-68* nozzle
6680332E96
PLCC-84 nozzle
6680332E89
QFP-80 nozzle
6680332E90
QFP-100* nozzle
6680332E91
QFP-132* nozzle
6680334E67
QFP-160 nozzle
6680332E86
SOIC-14/SOL-16J nozzle
6680333E46
SOL-18 nozzle
6680332E84
SOIC-20 nozzle
6680332E87
SOL-20J nozzle
6680333E45
SOL-24 nozzle
6680332E88
SOL-28J nozzle
6680333E54
TSOP-32 nozzle
6680333E55
TSOP-64 nozzle
Soldering and unsoldering ICs
* Included with ChipMaster packages
4.3
Voltage Measurement and Signal Tracing
It is always a good idea to check the battery voltage under load. This can be done by checking the
OPT_B+_VPP pin at the side connector (pin 4). The battery voltage should remain at or above
7.0 Vdc. If the battery voltage is less than 7.0 Vdc, then it should be recharged or replaced as
necessary prior to analyzing the radio.
In most instances, the problem circuit may be identified using a multimeter, an RF millivoltmeter,
oscilloscope (preferably with 100 MHz bandwidth or more), and a spectrum analyzer.
Caution
6881094C31-C
When checking a transistor or module, either in or out of
circuit, do not use an ohmmeter having more than 1.5 Vdc
appearing across test leads or use an ohms scale of less than
x100.
October 14, 2003
4-4
4.4
Troubleshooting Procedures: Standard Bias Table
Standard Bias Table
Table 4-2 outlines some standard supply voltages and system clocks which should be present under
normal operation. These should be checked as a first step to any troubleshooting procedure.
Table 4-2. Standard Operating Bias
Signal Name
Nominal Value
Tolerance
VOCON Board Source
13 MHz
±1000 ppm
C303 (NTN9564)
C339 (NNTN4563, NNTN4819 &
NNTN4717)
FLIP_32K
32.768 kHz
±400 ppm
U302, pin2
(under shield SH102
on NNTN4563, NNTN4819 &
NNTN4717)
SINE32K
32.768 kHz
±400 ppm
C313 (NTN9564)
C306 (NNTN4563, NNTN4819 &
NNTN4717)
13 MHz
CKIH
16.8 MHz
R452
(under shield SH101 on NNTN4563,
NNTN4819 & NNTN4717 or
test fixture pin 7 on the
board-to-board connector)
16_8MHz
16.8 MHz
C452
(under shield SH101
on NNTN4563, NNTN4819 &
NNTN4717)
POR
3.0 Vdc
±5%
POR test point
RESET_OUT
3.0 Vdc
±5%
RESET_OUT test point (NTN9564)
D401, pin 3 (NNTN4563, NNTN4819 &
NNTN4717)
VSW1
3.85 Vdc
±5%
R502
VSW2
1.85 Vdc
±5%
R501
FILT_B+
7.5 Vdc
6.0-9.0 Vdc
C523
3.0 Vdc*
2.9 Vdc**
±5%
R560
GCAP_B+
7.5 Vdc
6.0-9.0 Vdc
R581
UNSW_B+
7.5 Vdc
6.0-9.0 Vdc
B104
SW_B+
7.5 Vdc
6.0-9.0 Vdc
R587
VCC5
5.0 Vdc
±5%
R503
VSW_1_55 V
1.55 Vdc
±5%
R407 (NNTN4717 VOCON kit only)
V2
* = NTN9564, NNTN4563, & NNTN4819 VOCON kits
** = NNTN4717 VOCON kit
October 14, 2003
6881094C31-C
Troubleshooting Procedures: Power-Up Self-Check Errors
4.5
4-5
Power-Up Self-Check Errors
Each time the radio is turned on, the MCU and DSP perform a series of internal diagnostics. These
diagnostics consist of checking such programmable devices as the FLASH ROMs, the EEPROM,
and SRAM devices.
Problems detected during the power-up self-check routines are presented as error codes on the
radio’s display. For non-display radios, the problem is presented at power up by a single, lowfrequency tone. Table 4-3 lists possible error codes, a description of each error code, and a
recommended corrective action.
Table 4-3. Power-Up Self-Check Error Codes
Error
Code
Description
Corrective Action
01/02
FLASH ROM codeplug Checksum Non-Fatal Error
Reprogram the codeplug
01/12
Security Partition Checksum Non-Fatal Error
Send radio to depot
01/20
ABACUS Tune Failure Non-Fatal Error
Turn radio off, then on
01/22
Tuning Codeplug Checksum Non-Fatal Error
Send radio to depot
01/81
Host ROM Checksum Fatal Error
Send radio to depot
01/82
FLASH ROM Codeplug Checksum Fatal Error
Reprogram the codeplug
01/88
External RAM Fatal Error — Note: Not a checksum error
Send radio to depot
01/90
General Hardware Failure Fatal Error
Turn radio off, then on
01/92
Security Partition Checksum Fatal Error
Send radio to depot
01/93
FLASHport Authentication Code Failure
Send radio to depot
01/98
Internal RAM Fail Fatal Error
Send radio to depot
01/A2
Tuning Codeplug Checksum Fatal Error
Send radio to depot
02/81
DSP ROM Checksum Fatal Error
Send radio to depot
02/88
DSP RAM Fatal Error — Note: Not a checksum error
Turn radio off, then on
02/90
General DSP Hardware Failure (DSP startup message not
received correctly)
Turn radio off, then on
09/10
Secure Hardware Failure
Turn radio off, then on
09/90
Secure Hardware Fatal Error
Turn radio off, then on
6881094C31-C
October 14, 2003
4-6
4.6
Troubleshooting Procedures: Power-Up Self-Check Diagnostics and Repair (Not for Field Use)
Power-Up Self-Check Diagnostics and Repair (Not for Field Use)
Table 4-4 lists additional action items that can be used for the diagnosis and resolution of the error
codes listed in Table 4-3 on page 4-5.
Table 4-4. Power-Up Self-Check Diagnostic Actions
Error
Code
Diagnostic Actions
01/02
This non-fatal error will likely recover if the radio’s power is cycled. In the event that this
does not resolve the issue, the radio should be reflashed. As a last resort, the FLASH
ROM U402 should be replaced.
01/12
The radio should be sent to the depot for reflashing of the security codeplug.
01/20
Cycling radio power should resolve this issue.
01/22
The radio should be sent to the depot for reflash of the tuning codeplug followed by
retuning of the radio.
01/81
The radio should be sent to the depot for reflashing of the host code.
01/82
The radio should be sent to the depot for reflashing of the radio codeplug.
01/88
Reflashing of the radio should first be performed. If this fails to resolve the issue, then
replacement of the SRAM U403 is necessary.
01/90
Cycle power to radio. Continued failure indicates a likely IC failure (GCAP, PCIC,
FLIPPER, ABACUS). In this event, radio should be sent to the depot for isolation and
repair of the problem IC.
01/92
The radio should be sent to the depot for reprogramming of the security codeplug.
01/93
The radio should be sent to the depot for reflashing of the host code.
01/98
Send radio to the depot for replacement of the SRAM U403.
01/A2
The radio should be sent to the depot for reflashing of the tuning codeplug followed by
re-tuning of the radio.
02/81
The radio should be sent to the depot for examination and/or replacement of either the
FLASH U402, or the PATRIOT MCU/DSP U401.
02/88
Cycle power to the radio. If this does not fix the problem, then the radio should be sent
to the depot for reflashing of the DSP code. Continued failure requires examination and/
or replacement of the SRAM U403.
02/90
Cycle power to the radio. If this fails to fix the problem, then the radio should be sent to
the depot for reflashing of the DSP code. Continued failure may require replacement of
U401, the PATRIOT MCU/DSP.
09/10
Cycle power to the radio. If this fails then follow instructions in the secure hardware
failure troubleshooting flowchart.
09/90
Cycle power to the radio. If this fails then follow instructions in the secure hardware
failure troubleshooting flowchart.
October 14, 2003
6881094C31-C
Chapter 5 Troubleshooting Charts
This section contains detailed troubleshooting flowcharts. These charts should be used as a guide in
determining the problem areas. They are not a substitute for knowledge of circuit operation and
astute troubleshooting techniques. It is advisable to refer to the related detailed circuit descriptions in
the theory of operation sections prior to troubleshooting a radio.
5.1
List of Troubleshooting Charts
Most troubleshooting charts (see Table 5-1) end up by pointing to an IC to replace. It is not always
noted, but it is good practice to verify supplies and grounds to the affected IC and to trace
continuity to the malfunctioning signal and related circuitry before replacing any IC. For
instance, if a clock signal is not available at a destination, continuity from the source IC should be
checked before replacing the source IC.
Table 5-1. Troubleshooting Charts List
Chart Title
Page
Number
Main Troubleshooting Flowchart
5-2
Power-Up Failure
5-3
DC Supply Failure
5-5
Display Failure (NNTN4563, NNTN4819, & NNTN4717
VOCON Kits)
5-8
Display Failure (NTN9564)
5-11
Volume Set Error
5-14
Channel/Zone Select Error
5-15
Button Test
5-16
Top/Side Button Test
5-17
VCO TX/RX Unlock
5-18
VOCON TX Audio
5-19
VOCON RX Audio
5-21
RX RF
5-23
TX RF (VHF)
5-28
TX RF (UHF R1/700-800 MHz)
5-31
Keyload Failure
5-34
Secure Hardware Failure
5-35
5-2
5.2
Troubleshooting Charts: Main Troubleshooting Flowchart
Main Troubleshooting Flowchart
Start
Good
power-up
Self-Test?
Yes
Go to
TX RF
flowchart
No
Is there
TX Power?
No
Error
Message?
No
Yes
Display
Model?
Yes
No
See Table 5-2:
Power-up SelfCheck Error
Codes
Use RSS to
display Error
Messages
Yes
Go to
TX RF
flowchart
No
Is TX
Deviation
OK?
Yes
Go to
VOCON
RX Audio
flowchart
No
Receive
Audio?
Yes
Error
Messages on
RSS?
No
Go to either
Display Failure or
Power-Up Failure
flowchart
Yes
No
Good
SINAD?
Yes
See Button
Test flowchart
No
Buttons
Functional?
Yes
End
MAEPF-27403-A
October 14, 2003
6881094C31-C
Troubleshooting Charts: Power-Up Failure
5.3
5-3
Power-Up Failure—Page 1
Radio
Power-Up
Failure
Verify Standard
Bias in
Table 5-1
Isolate and
Repair Problem
See DC Supply
Failure flowchart
No
Standard
Bias OK?
Yes
Remove
R528 (VOCON)
Replace U301
(Flipper) and
place R528
back on board
Yes
Fixed?
No
Place R528
back on board
Signal may appear
for a very short period
of time (50 ms). Use
an oscilloscope with
trigger to capture signal.
Probe
32.768 kHz
Clock at R316
Signal
Present?
Verify integrity
of C308 and
C309
No
Yes
Is
VOCON Board
NNTN4563, NNTN4819,
or NNTN4717
kit?
No
Yes
Remove
Shield
SH101
MAEPF-27389-C
6881094C31-C
October 14, 2003
5-4
Troubleshooting Charts: Power-Up Failure
Power-Up Failure—Page 2
Signal may
appear for a very
short period of
time (50ms). Use
an oscilloscope
with trigger to
capture signal.
Probe
16.8 MHz
Signal at R452
Signal
greater than
600mV?
Investigate
16.8 MHz
Reference
Oscillator
No
Yes
This signal may
contain harmonics
and, therefore, may
not appear as a
perfect sinewave.
Check
16.8 MHz
Signal at
C452
Signal
greater than
600mV?
Note: All components noted on this
chart are VOCON components.
Investigate
Clock Buffer
Components and
Isolate Problem
No
Yes
Refer Board to
Service Depot for
Reflash, Patriot,
SRAM, and
FLASH Analysis
Components
OK?
No
Replace
Problem
Component
Yes
Fixed?
Yes
End
No
Replace
Y301
Fixed?
No
Replace
U301
Yes
MAEPF-27390-A
October 14, 2003
6881094C31-C
Troubleshooting Charts: DC Supply Failure
5.4
5-5
DC Supply Failure—Page 1
NOTE: Since the failure of a critical voltage supply might cause the radio to automatically power
down, supply voltages should first be probed with a multimeter. If all the board voltages
are absent, then the voltage test point should be retested using a rising-edge-triggered
oscilloscope. If the voltage is still absent, then another voltage should be tested using the
oscilloscope. If that voltage is present, then the original voltage supply in question is
defective and requires investigation of associated circuitry.
Problem with
DC Distribution
Network
Check Voltage
at pin 5 of
Q501 (VOCON)
Voltage
= B+?
No
Check
Continuity of
Fuse F901
on transceiver
Fuse OK?
Yes
Replace
Fuse
Yes
Check Voltage
at pin 1 of
Q501
Voltage
= B+?
No
Check Battery
Connections for
Good Contact
No
Check Voltage
at pin 3 of
Q502
Voltage
= B+?
Yes
No
Replace Front
Cover Housing
Assembly
Yes
Check Voltage
at pin 2 of
Q502
Fixed?
Yes
End
No
Replace
Q501
Yes
Voltage
= 0V?
No
Replace
Q502
MAEPF-27391-A
6881094C31-C
October 14, 2003
5-6
Troubleshooting Charts: DC Supply Failure
DC Supply Failure—Page 2
Check Voltage
at B502
(VOCON)
Voltage
= 3.77V+/-5%?
No
Check R502,
C506, L502,
and D503
Yes
Yes
No
Replace
Problem
Component
Check Voltage
at R501
Voltage
= 1.85V+/-5%?
Components
OK?
No
Check R763,
L703, C717,
and CR700
Components
OK?
Yes
ReFLASH
HOST C
Code
No
Yes
Replace
Problem
Component
Check Voltage
at R560
Fixed?
Yes
End
No
Voltage
= V2?*
No
* per Standard Bias Table
Replace
U501
(GCAP II)
Yes
MAEPF-27392-B
October 14, 2003
6881094C31-C
Troubleshooting Charts: DC Supply Failure
5-7
DC Supply Failure—Page 3
Check Voltage
at pin 5 of
U505 (VOCON)
Voltage
= 5.0V+/-5%?
No
Check R503,
D501, C509,
C510, and C508
Components
OK?
No
Replace
Problem
Component
No
Replace
Problem
Component
No
Replace
Problem
Component
No
Replace
Problem
Component
No
Replace
Problem
Component
Yes
Yes
Replace
700-800: U505
VHF: U1
Check Voltage
at TP5
* per Standard Bias Table
Check
700-800: E6, C15,
Voltage
No
C16, C17, and D2
= V2?*
VHF: E6, C6,
C8, and D2
Yes
Check Voltage
at TP7
Components
OK?
Yes
Replace
U2
* per Standard Bias Table
Voltage
= V2?*
No
Check
700-800: D3, R704,
C19, and C20
VHF: E7, C9, C10,
C11, and D3
Yes
No
Components
OK?
Yes
Replace
U3
Is unit
VHF?
Yes
Check Voltage
at TP6
* per Standard Bias Table
Voltage
= V2?*
No
Check
E8, C18, C19,
C20, and D4
Yes
Yes
Check Voltage
at TP3
Voltage
= 5.0V+/-5%?
Yes
End
6881094C31-C
Components
OK?
Replace
U5
No
Check
700-800: D1, E5,
C12, C13, and C14
VHF: E5, C3, C4,
C5, and D1
Components
OK?
Yes
Replace
U1
MAEPF-27393-C
October 14, 2003
5-8
5.5
Troubleshooting Charts: Display Failure (NNTN4563, NNTN4819, & NNTN4717 VOCON Kits)
Display Failure (NNTN4563, NNTN4819, & NNTN4717 VOCON Kits)
Page 1
NOTE: The NNTN4563 VOCON board is compatible only with the 7285726C02 display module,
and the NNTN4819 VOCON board is compatible only with the 7285726C03 display
module.
No Display
Replace
LCD Display
Problem
Resolved?
Yes
End
No
Check DC
on J301,
pins 17 and 18
2.775 V11.0Vdc or
drifting?
No
Check if VCO
is locked using
spectrum analyzer
Remove
VCO shield
VCO locked?
Is unit
VHF?
Yes
Check parts
around U202. If
OK, replace U202
No
Yes
Yes
Aux. line
3 high for TX
or low for RX
(VHF)?
No
Check
VOCON board
Yes
Check parts
around U302.
If OK, replace
Q302
Field Effect Transistor (FET)
Q302 VC01
Q306 VC02
Q309 VC03
Yes
No
FET
drain voltage
0V?
Remove
VCO buffer
shield (SH302)
No
Yes
No
Aux.
line 1 (2,4)
is high?
Is pin
19 of VCOBIC
low for RX and
4.5 for TX?
No
Check parts
around Q301. If
OK, replace Q301
Check parts
around FET. If
OK, replace FET
Yes
BJT
emitter voltage
>1.2V?
No
Check parts
around U300. If
OK, replace U300
Yes
Bi-polar Transistor (BJT)
Q301 VC01
Q303 VC02
Q308 VC03
Check parts
around BJT. If
OK, replace BJT
MAEPF-27398-A
October 14, 2003
6881094C31-C
Troubleshooting Charts: VOCON TX Audio
5-19
5.12 VOCON TX Audio—Page 1
Radio has no
Transmitter Deviation
(VOCON Evaluation)
Inspect
Microphone and
Flex Connector
No
Connections
OK?
Repair connections
and/or replace flex
and microphone
Yes
Connect an
RLN4460A audio
test box (or equivalent)
to the radio side
connector
Inject a 200 mV
rms 1.0 kHz tone
to the test box
Audio In port
Is FM
deviation approx.
3.0 kHz?
Yes
No Problem
found.
End
No
Verify Integrity
of Mic path up
to U509
No
Probe Voltage
at U509, pin 5
Is
1 kHz Signal
present at approx.
14 mV rms?
Problem
with Mic path
components?
Replace
appropriate
component
No
Yes
Yes
MAEPF-27396-O
6881094C31-C
October 14, 2003
5-20
Troubleshooting Charts: VOCON TX Audio
VOCON TX Audio—Page 2
Use an oscilloscope to check the
SSI audio signals from the GCAP
(U703). The following test points
are used for data collection:
DCLK: 520 kHz Square Wave Clock*
256 kHz Square Wave Clock**
TX: Audio Data Words
SYNC: 8 kHz Frame Sync Pulse
Clock
and Frame Sync
present?
No
* on NTN9564, NNTN4563 & NNTN4819 VOCON boards
** on NNTN4717 VOCON board
* on NTN9564, NNTN4563 & NNTN4819 VOCON boards
Replace U301* ** on NNTN4717 VOCON board
Replace U401**
(Flipper ASIC)
Yes
Data
present at TX
test point?
No
Replace U501
(GCAP II)
Yes
Go to
TX RF
flowchart
No
Problem
Resolved?
Yes
End
Replace
U509
(EEPOT)
Is
1 kHz signal
present at about
14 mV
rms?
No
Replace
U501
(GCAP II)
Yes
Problem
Solved?
Yes
End
No
MAEPF-27397-A
October 14, 2003
6881094C31-C
Troubleshooting Charts: VOCON RX Audio
5-21
5.13 VOCON RX Audio—Page 1
Bad SINAD
Bad 20db Quieting
No Recovered Audio
A standard input is an
RF signal with a 1 kHz
tone modulated with 3 kHz
deviation in a 25 kHz channel.
Inject Standard
Input into Antenna
Connector
Check Preamp
Input Signal at
C533
Signal
Present?
No
Yes
Yes
Data
Present?
No
Probe R405
for Clock Signal,
Compare with
RX SAP
waveform, Trace 3
Clock
Present?
Probe R406 for
Frame Sync Signal,
Compare with
RX SAP waveform,
Trace 1
Replace U501
(GCAP II)
No
Go to
RX RF
flowchart
No
Yes
Yes
Check
Distortion of
Signal at C533
THD <3%?
Probe R403 for
Data, Compare
with RX SAP
waveform, Trace 2
Yes
Frame
Sync
Present?
No
* on NTN9564, NNTN4563 & NNTN4819 VOCON boards Replace U301*
** on NNTN4717 VOCON board
Replace U401**
(FLIPPER)
MAEPF-27394-A
6881094C31-C
October 14, 2003
5-22
Troubleshooting Charts: VOCON RX Audio
VOCON RX Audio—Page 2
Check Preamp
Output Signal
at C530
Signal
Present?
No
Check Preamp
U502 and its
associated
components
Make sure that you look at
all solder contacts. Check
resistors and capacitors
associated with this check. If
all look fine, then replace U502.
Yes
Distortion
>3%?
Yes
No
Preamp Gain
= 2.8 V/V?
No
Yes
PA Gain
= 11.2 V/V?
No
Check Audio PA
U503 and its
Components
Make sure that you look at
all solder contacts. Check
resistors and capacitors
associated with this check. If
all look fine, then replace U503.
Yes
Distortion
>3%?
Yes
No
Check Flex
Connector
MAEPF-27395-O
October 14, 2003
6881094C31-C
Troubleshooting Charts: RX RF
5-23
5.14 RX RF—Page 1
Poor RX
sensitivity or
no RX audio
Inject a standard FM test signal
into the antenna port. Use CPS to
ensure that attenuator feature is
disabled. Use a spectrum analyzer
and high-impedance RF probe to
measure the IF signal at TP12
(700-800) or TP15 (VHF) on side 2
Frequency OK?
VHF: 44.85 MHz
UHF: 73.35 MHz
700-800: 109.65 MHz
3 kHz FM deviation,
1 kHz rate, -47 dBm
No
Check
RXLO
Yes
IF
level about
-38 dBm?
Yes
No
Measure RF
input level
at TP02
RF level
about
-47 dBm?
No
Inspect coaxial
antenna connector
and cable assembly
Measure RF levels at TP02
and TP13 (UHF & 700-800)
or TP401 (VHF),
compute SW_FL loss
Yes
No
Replace
bad part
No
Replace
cable assembly
Yes
Yes
SW_FL
loss < 2 dB?
Visual
inspection
OK?
No
Remove cable
assembly, measure
insertion loss
Check
SW_FL
Loss
< 0.2 db?
Yes
Bad antenna connector.
Replace chassis
(connector is not
serviceable)
MAEPF-27470-B
6881094C31-C
October 14, 2003
5-24
Troubleshooting Charts: RX RF
RX RF—Page 2
2nd LO, 700-800: 107.4 MHz, VHF: 42.6 MHz, about 356 mVpp
Measure 2nd LO at
TP501 (UHF & 700-800)
or TP18 (VHF)
on PCB side 2
Signal
Present?
2nd LO DC bias
No
Q501-c
= 5.0 Vdc?
Yes
Check Voltage
Regulator U1
No
Replace
Q501
Yes
LO Freq.
OK?
VHF: 42.6 MHz
UHF: 71.1 MHz
700-800:
107.4 MHz
No
Q501-e
= 3.7 Vdc?
Yes
Remove SH501
(UHF & 700-800)
or SH502 (VHF), inspect
2nd LO VCO
Yes
Measure
RXCK, P1-5
RXFS, P1-6
RXDO, P1-12
Visual
examination
OK?
Observe
0 to 3 Vdc
digital signals
Levels
OK?
No
No
Repair
Defects
Yes
No
Replace
Q502
Yes
Measure
bit clock rate
(Fbit) at RXCK
Fbit =
1.2 MHz?
No
RXDO = 24-bit I,
24-bit Q, 8-bit
AGC. AGC varies
with RF level
Yes
RXDO
OK?
RXFS = 20 kHz
sync pulse
No
Yes
RXFS
OK?
Yes
October 14, 2003
No
Go to
VOCON RX
AUDIO flowchart
MAEPF-27471-B
6881094C31-C
Troubleshooting Charts: RX RF
5-25
RX RF—Page 3
Measure RF levels at first preselector
filter and compute filter loss.
VHF: TP401, TP9
UHF: TP13, U401-3
700-800: TP13, D401-3
Loss < 3 db?
No
VHF
TP502 TP18
(Vdc) (MHz)
Fvco
Measure
control voltage
at TP502
Yes
1.40
3.20
Fvco
too low?
VHF: < 42.6 MHz
UHF: < 71.1 MHz
700-800:
< 107.4 MHz
UHF R1
TP502 TP501
(Vdc) (MHz)
Fvco
1.7
3.7
42.6
47.1
No
TP502
= 0 Vdc?
71.1
75.6
No
700-800 MHz
TP502 TP501
(Vdc) (MHz)
Fvco
0.00
1.85
4.30
5.00
101.0
107.4
111.9
113.0
Yes
Yes
Measure RF levels at LNA
and compute LNA gain.
VHF: TP9, TP12
UHF: U401-1, TP402
700-800: D401-3, TP402
No
TP502
= 5 Vdc?
Yes
Gain
about
+12 dB?
No
Check
LNA
Yes
Measure RF levels at second preselector
filter and compute filter loss.
VHF: TP12, TP451
UHF: TP402, TP403
700-800: TP402, TP403
Remove Abacus shield and
inspect second LO VCO.
VHF: SH502
UHF: SH501
700-800: SH501
Visual
examination
OK?
Repair
defects
No
Yes
Loss
< 3 dB?
No
Replace
Varactor D550
Yes
Measure RF and IF level at mixer
and compute mixer conversion gain.
VHF: TP451, TP15
UHF: TP403, TP404
700-800: TP403, TP404
Mixer
gain about
4 dB?
Yes
No
Measure IF level at XTAL filter
and compute XTAL filter loss.
VHF: TP15, TP455
UHF: TP404, TP12
700-800: TP404, TP12
Check
mixer
Loss
< 3 dB?
No
Yes
No problem
found
MAEPF-27472-B
6881094C31-C
October 14, 2003
5-26
Troubleshooting Charts: RX RF
RX RF—Page 4
Clock
synthesizer
Measure
tuning voltage
(Vt) at R512
Fbit
< 1.2 MHz?
Remove SH501,
inspect
components
No
Vt = 0 Vdc?
Yes
Yes
Vt= 3 Vdc?
No
No
Visual
examination
OK?
No
Repair
defects
Yes
Replace
Abacus
U500
Yes
Remove SH501,
inspect clock
oscillator circuit at
U500-19, 20
Repair
defects
No
Visual
examination
OK?
Yes
Replace
Varactor D501
MAEPF-27473-O
October 14, 2003
6881094C31-C
Troubleshooting Charts: RX RF
5-27
RX RF—Page 5
Measure prselector filter
tuning voltage dac1 and dac2.
VHF: None, TP29
UHF: TP401, TP405
700-800: TP401, TP405
Remove IF filter shield. Check IF
filter and LC matching networks.
VHF: SH451
UHF: SH403
700-800: SH403
Is
unit
VHF?
Visual
inspection
OK?
Yes
Repair
defects
Yes
No
dac1 = dac2?
No
No
Replace
PCIC
Replace IF filter.
VHF: FL451
UHF: FL490
700-800: FL403
Yes
Tune the radio across several
channels. Measure dac2,
proportional to frequency.
Band
VHF
UHF
Dac
voltages
OK?
No
Replace
PCIC
700-800
F (MHz) dac2 (Vdc)
136
174
380
470
770
869
1.3
2.4
0.5
2.9
1.5
3.5
Yes
VHF/UHF: Check discrete
preselector filters.
700-800: Replace FL401
or FL402.
MAEPF-27474-B
6881094C31-C
October 14, 2003
5-28
Troubleshooting Charts: TX RF (VHF)
5.15 TX RF (VHF)—Page 1
No or low
TX power
Measure RF
level
at C147
Place XCVR and VOCON
into the analysis fixture.
Key up. Measure RF
power at antenna port
TX
power OK?
Yes
Check coaxial
connector and
cable assembly
No
Level about
0 dBm?
Yes
Is voltage
5 V?
No
Check
FGU
Yes
Level
about
-3 dBm?
Measure
drain of
Q104
Use a spectrum analyzer
and high-impedance RF
probe. Measure TXRF
at C016
Frequency
OK?
No
No
Check bias of Q101,
Q103, and Q106.
Replace bad
transistors
Yes
Remove SH701
and check for
parts off pad
No
Check
FGU
Yes
Measure RF level
at Q107 pin 2
Level about
+15 dBm?
No
Yes
MAEPF-27635-O
October 14, 2003
6881094C31-C
Troubleshooting Charts: TX RF (VHF)
5-29
TX RF (VHF)—Page 2
Measure
RAWB+
at U102-6
Measure
RAWB+
at Q107-drain
RAWB+
about
7.2 Vdc?
No
Check
continuity
RAWB+
about
7.2 Vdc?
Yes
Yes
Measure
TX7V at
U102-14
Measure
gate bias
at L108
TX7V
about
7.2 Vdc?
No
Check
continuity
No
Check
continuity
Yes
Yes
DC bias is OK,
control is OK,
RFIN is OK,
PA has low gain
Measure
Vgate at TP111,
normally 4 to
5.5 Vdc
Vgate
> 4 Vdc?
V.gate
about 2 to
3 Vdc?
No
No
Yes
DC bias is OK,
control is OK,
RFIN is OK, driver
has low gain
Is
unit
VHF?
Yes
Measure RF
level at
pin 6 of Q107
No
Replace
Q107
No
Level
about
+35 dBm?
Yes
Remove SH101
and check for
parts off pad
Replace U102.
For VHF, check under
SH101. if all parts soldered,
replace U102.
MAEPF-27420-B
6881094C31-C
October 14, 2003
5-30
Troubleshooting Charts: TX RF (VHF)
TX RF (VHF)—Page 3
TX7V is low.
Measure TXINH
at P1-19, Q101-b
Vgate at TP111
is low (< 4 Vdc)
Measure INT
at TP104
TXINH
< 1 Vdc?
No
Bad control
signal from
VOCON
Yes
Replace
Q108
No
Bad PCIC
Replace U104
INT is low.
Measure VLIM
at TP119
No
Yes
RXH
> 5 Vdc?
Yes
No
Measure RXH
at U104-23
and Q103-b
RXH
< 1 Vdc?
INT > 5 Vdc?
VLIM
about 2 to
3 Vdc?
Yes
No
Bad PCIC
Replace U104
PCIC is
programmed.
Measure TEMP
at R130
Yes
Trace dc levels
through switching
transistors Q101,
Q102, Q103,
and Q106
Replace bad
transistors
TEMP
< 1.0 Vdc at
25C?
No
Repair temperature
sensor circuit
(U103, Q109,
R130)
Yes
Measure
RFIN at
TP101
TP101
< 0.5 Vdc?
No
Low output power,
RFIN is high, check
RF detectors and
op amp U106.
Repair defects
Yes
RFIN is low, INT
is low, bad PCIC,
replace U104
MAEPF-27476-O
October 14, 2003
6881094C31-C
Troubleshooting Charts: TX RF (UHF R1/700-800 MHz)
5-31
5.16 TX RF (UHF R1/700-800 MHz)—Page 1
No or low
TX power
Measure RF level
at PA output,
C103.
Place XCVR and VOCON
into the analysis fixture.
Key up. Measure RF
power at antenna port
TX
power OK?
Yes
Check coaxial
connector and
cable assembly
No
Level about
+36 dBm?
Yes
Loss < 1 db?
No
Check
FGU
Yes
Level
about
-3 dBm?
No
Check
FGU
No
Measure RF levels
at D701-cathode and
TP02. Calculate
harmonic filter loss
Loss < 2 db?
Measure RF level
at driver amp
outlet, C107.
Check
switch
Yes
Yes
RF level OK?
Approx. +26 dBm
Measure RF levels
at C103 and D701cathode. Calculate
switch loss
Use a spectrum analyzer
and high-impedance RF
probe. Measure TXRF
at TP11
Frequency
OK?
No
No
Remove
SH700,
repair defects
Yes
Go to
VOCON TX
AUDIO flowchart
No
Yes
MAEPF-27475-B
6881094C31-C
October 14, 2003
5-32
Troubleshooting Charts: TX RF (UHF R1/700-800 MHz)
TX RF (UHF R1/700-800 MHz)—Page 2
Measure
RAWB+
at U102-6
Measure
RAWB+
at Q107-drain
RAWB+
about
7.2 Vdc?
No
Check
continuity
RAWB+
about
7.2 Vdc?
Yes
Yes
Measure
TX7V at
U102-14
Measure
gate bias
at L108
TX7V
about
7.2 Vdc?
No
Check
continuity
No
Check
continuity
Yes
Yes
DC bias is OK,
control is OK,
RFIN is OK,
PA has low gain
Measure
Vgate at TP111,
normally 4 to
5.5 Vdc
Vgate
> 4 Vdc?
V.gate
about 2 to
3 Vdc?
No
No
Yes
DC bias is OK,
control is OK,
RFIN is OK, driver
has low gain
Is
unit
VHF?
Yes
Measure RF
level at
pin 6 of Q107
No
Replace
Q107
No
Level
about
+35 dBm?
Yes
Remove SH101
and check for
parts off pad
Replace U102.
For VHF, check under
SH101. if all parts soldered,
replace U102.
MAEPF-27420-B
October 14, 2003
6881094C31-C
Troubleshooting Charts: TX RF (UHF R1/700-800 MHz)
5-33
TX RF (UHF R1/700-800 MHz)—Page 3
TX7V is low.
Measure TXINH
at P1-19, Q101-b
Vgate at TP111
is low (< 4 Vdc)
Measure INT
at TP104
TXINH
< 1 Vdc?
No
Bad control
signal from
VOCON
Yes
Replace
Q108
No
Bad PCIC
Replace U104
INT is low.
Measure VLIM
at TP119
No
Yes
RXH
> 5 Vdc?
Yes
No
Measure RXH
at U104-23
and Q103-b
RXH
< 1 Vdc?
INT > 5 Vdc?
VLIM
about 2 to
3 Vdc?
Yes
No
Bad PCIC
Replace U104
PCIC is
programmed.
Measure TEMP
at R130
Yes
Trace dc levels
through switching
transistors Q101,
Q102, Q103,
and Q106
Replace bad
transistors
TEMP
< 1.0 Vdc at
25C?
No
Repair temperature
sensor circuit
(U103, Q109,
R130)
Yes
Measure
RFIN at
TP101
TP101
< 0.5 Vdc?
No
Low output power,
RFIN is high, check
RF detectors and
op amp U106.
Repair defects
Yes
RFIN is low, INT
is low, bad PCIC,
replace U104
MAEPF-27476-O
6881094C31-C
October 14, 2003
5-34
Troubleshooting Charts: Keyload Failure
5.17 Keyload Failure
Keyload Failure
Verify the use of the correct secure kit and key loader:
XTS 5000 UCM Kits:
Software Kits:
NNTN4006A - DES, DES-XL, DES-OFB
NTN9837A - DES, DES-XL, DES-OFB with DVP-XL
NTN9838A - DVI-XL
NTN9839A - DVP-XL
NNTN4197 - AES
NNTN4198 - AES with DES, DES-XL, DES-OFB
Hardware Kits:
NTN9738C
NNTN5032A
Use KVL - 3000 or later model Keyloader. Use with
cable TDN9390.
Obtain correct
KVL and
cable
No
Correct
equipment?
Yes
With KVL attached to
radio and radio on,
verify display
message "KEYLOAD"
Verify and repair
connection of UC_CTS,
UC_RS232DIN_USB-,
and UC_OPT_SEL2 signals
from KVL to universal
connector to J101
No
"KEYLOAD"
message
displayed?
Yes
Verify connection
of KEYFAIL
from the universal
connector pin 13 to
J101-2 and D301
Good
connection?
No
Repair
connection
Yes
With KVL attached to radio
and radio on, initiate a
keyload by pressing PTT on
the keyloader and look for
activity on J701-1
No
Activity?
Repair
connection
Yes
No
Verify
connection
across J701
Good
connection?
Yes
Verify operation of
voltage translator
circuit by seeing
activity on R315
Translator
circuit OK?
Synopsis
This failure relates only to secureequipped radios and indicates a
failure to load key with the KVL
indicated by the message
"KEYFAIL" and key-fail tone.
Typical failure modes would be:
1) Open between universal
connector uC which places radio
in Keyload mode.
2) Use of wrong KVL or KVL cable
for XTS 5000 radio.
3) Failure of secure module.
Replace
secure
module
No
Replace
translator
circuit
Yes
Replace
VOCON
board
MAEPF-27388-B
October 14, 2003
6881094C31-C
Troubleshooting Charts: Secure Hardware Failure
5-35
5.18 Secure Hardware Failure
Fail
09/10 or 09/90
Secure Hardware
Failure
Verify connections
to secure module
through J701
No
Repair
opens
Connections
good?
Yes
Replace module
with known good
one and retest
Yes
Synopsis
This failure relates only to secure-equipped
radios and indicates a power-up self-test failure
for the secure module. More specifically this
failure indicates a failure in communications
between the DSP and secure module. The
secure module is not considered field repairable
so troubleshooting is limited to verifying a
problem with the module and replacing.
Typical failure modes would be:
1) Open between secure module and VOCON
board at J701.
2) Failure of the SSI bus that the DSP uses to
communicate with the secure module.
3) Failure to get proper supplies and grounds
to J701.
Is
known good
module
available?
No
Radio
functions with
known good
module?
Yes
Replace
secure
module
No
Use ohmmeter to electrically
verify the following signal
connections to source IC:
Signal @ J701
Source
ENC_SSI_DI
R403
ENC_SSI_DO
R402
ENC_SSI_CLK
R405
RESET_ENC
R418
Verify bias of following signals:
Signal @ J701
Nominal Bias
UNSW_B+
7.5VDC+/-1.0VDC
SW_B+
7.5VDC+/-1.0VDC
GND
GND
Replace
respective
source IC or
VOCON board
No
Connections
good?
Repair
connections
Yes
Verify electrical activity
at the following signals
at power up:
Signal @ J701 Source
ENC_SSI_DI
R403
ENC_SSI_CLK R405
No
Signals
good?
Yes
Replace
secure
module
MAEPF-27387-O
6881094C31-C
October 14, 2003
5-36
Troubleshooting Charts: Secure Hardware Failure
Notes
October 14, 2003
6881094C31-C
Chapter 6 Troubleshooting Waveforms
This chapter contains images of waveforms that might be useful in verifying operation of certain parts
of the circuitry. These waveforms are for reference only; the actual data depicted will vary depending
on operating conditions.
6.1
List of Waveforms
Table 6-1 lists each waveform and the page on which the waveform can be found.
Table 6-1. List of Waveforms
Waveform
Page No.
13 MHz Clock
6-2
16.8 MHz Buffer Input and Output
6-3
32.768 kHz Clock Outputs
6-4
SPI B Data
6-5
Receive Serial Audio Port (SAP)
6-6
Receive Baseband Interface Port (RX BBP)
6-7
Transmit Baseband Interface Port (TX BBP)
6-8
6-2
6.2
Troubleshooting Waveforms: 13 MHz Clock
13 MHz Clock
MAEPF-27490-O
13 MHz clock from U301 to U501.
Trace 1: Trace recorded at C303 on the NTN9564 board.
Similar waveform is visible on C339 on the NNTN4563, NNTN4819, & NNTN4717 VOCON
boards.
Figure 6-1. 13 MHz Clock Waveform
October 14, 2003
6881094C31-C
Troubleshooting Waveforms: 16.8 MHz Buffer Input and Output
6.3
6-3
16.8 MHz Buffer Input and Output
MAEPF-27491-O
Trace 1: Buffer input at R452.
Trace 2: Buffer output at C452.
Note: These components are under shield SH101 on the NNTN4563, NNTN4819, & NNTN4717
VOCON boards.
Figure 6-2. 16.8 MHz Buffer Input and Output Waveforms
6881094C31-C
October 14, 2003
6-4
6.4
Troubleshooting Waveforms: 32.768 kHz Clock Outputs
32.768 kHz Clock Outputs
MAEPF-27492-O
Trace 1: Output at C313 (to real-time clock of GCAP II IC).
Trace 2: Output at U302, pin 2 (to Patriot IC CKIL input).
Note: These components are under shield SH102 on the NNTN4563, NNTN4819, & NNTN4717
VOCON boards.
Figure 6-3. 32.768 kHz Clock Outputs Waveforms
October 14, 2003
6881094C31-C
Troubleshooting Waveforms: SPI B Data
6.5
6-5
SPI B Data
MAEPF-27493-O
Trace 1: GCAP II IC chip enable at R539 (Note active high).
Trace 2: SPI data clock at Test Point SCKB.
Trace 3: SPI data to GCAP II IC at Test Point MOSIB.
Figure 6-4. SPI B Data Waveforms
6881094C31-C
October 14, 2003
6-6
6.6
Troubleshooting Waveforms: Receive Serial Audio Port (SAP)
Receive Serial Audio Port (SAP)
MAEPF-27494-O
Trace 1: 8 kHz frame sync at R406 (each word is 13 bits after failing edge of FSYNC).
Trace 2: SAP data at R403 (audio data from GCAP II IC CODEC to Patriot IC DSP).
Note: Transmit is identical, except data acquired at R402.
Trace 3: 520 kHz bit clock at R405 on the NTN9564, NNTN4563 & NNTN4819 VOCON boards.
256 kHz bit clock at R405 on the NNTN4717 VOCON board.
Figure 6-5. Receive Serial Audio Port (SAP) Waveforms
October 14, 2003
6881094C31-C
Troubleshooting Waveforms: Receive Baseband Interface Port (RX BBP)
6.7
6-7
Receive Baseband Interface Port (RX BBP)
Trace 1: BBP RX frame sync signal at R123.
Trace 2: BBP RX clock signal at R124.
Trace 3: BBP RX data signal at R121.
Figure 6-6. Receive Baseband Interface Port (RX BBP) Waveforms
6881094C31-C
October 14, 2003
6-8
6.8
Troubleshooting Waveforms: Transmit Baseband Interface Port (TX BBP)
Transmit Baseband Interface Port (TX BBP)
Trace 1: BBP TX frame sync signal at R119.
Trace 2: BBP TX clock signal at R125.
Trace 3: BBP TX data signal at R127.
Figure 6-7. Transmit Baseband Interface Port (TX BBP) Waveforms
October 14, 2003
6881094C31-C
Chapter 7 Troubleshooting Tables
7.1
List of Board and IC Signals
Due to the nature of the schematic-generating program, signal names might be different when they
are not directly connected to the same point. The tables in this chapter provide a cross reference to
the various pinouts for these signals. Table 7-1 lists and provides links to each of the tables in this
chapter.
Table 7-1. List of Tables of Board and IC Signals
Table No.
Table Name
Page No.
7-2
J101 VOCON Board to Controls Flex Assembly
7-1
7-3
J107 VOCON Board to Keypad Module
7-3
7-4
J701 VOCON Board to Encryption Module
7-3
7-5
U402 FLASH Pinouts
7-5
7-6
U403 SRAM Pinouts
7-7
7-7
U401 Patriot MCU/DSP IC Pinouts
7-9
7-8
U301 Flipper IC Pinouts
7-18
7-9
U501 GCAP II IC Pinouts
7-20
Table 7-2. J101 VOCON Board to Controls Flex Assembly
J101
Pin No.
Description
To/From
Side
Connector
Number
UC_CTS
TP208
10
UC_LHDATA_KEYFAIL
TP206
13
DGND03
TP202
UC_RS232DIN_USB-
R253
12
UC_EXT_SPKR_NEG-
TP213
UC_RS232DOUT_USB+
R252
11
UC_OPT_SEL2
R218
UC_SB9600_BUSY
TP207
UC_EXT_SKPR
TP212
10
UC_RTS
TP209
7-2
Troubleshooting Tables: List of Board and IC Signals
Table 7-2. J101 VOCON Board to Controls Flex Assembly (Continued)
J101
Pin No.
October 14, 2003
Description
To/From
Side
Connector
Number
11
UC_OPT_SEL1
R217
12
UC_OPTB+_VPP
R255
13
UC_EXT_MIC
TP214
14
UC_EMERG
R233
15
DGND15
TP202
16
DGND16
TP202
17
UC_MONITOR
R244
18
DGND18
TP202
19
DGND19
TP202
20
UC_BL_FREQ
R206
21
UC_RED_LED
R203
22
UC_GREEN_LED
R204
23
UC_TG2
R234
24
UC_RTA1
R236
25
UC_RTA3
R241
26
UC_RTA2
R239
27
UC_RTA0
R235
28
DGND28
TP202
29
DGND29
TP202
30
DGND30
TP202
31
UC_VOLUME
R232
32
BSENS_1
L202
33
UNSWB+1
L201
34
UC_TG1
R231
35
V2A
L203
36
UC_INT_MICU
L208
37
C_INT_SPKR_NEG
TP213
38
UC_INT_PTT
R216
39
AGND39
L204
40
UC_INT_SPKR
L205
6881094C31-C
Troubleshooting Tables: List of Board and IC Signals
7-3
Table 7-3. J107 VOCON Board to Keypad Module
J107
Pin No.
Description
To/From
Accessible
on
VOCON?
KP_COLUMN0
C134
Yes
KP_COLUMN1
C133
Yes
KP_COLUMN2
C132
Yes
KP_GND
GROUND
Yes
KP_GND
GROUND
Yes
KP_BL_EN
C124
Yes
KP_5V1
C104
Yes
KP_5V2
C104
Yes
KP_GND
GROUND
Yes
10
KP_GND
GROUND
Yes
11
KP_GND
GROUND
Yes
12
KP_GND
GROUND
Yes
13
KP_ROW0
C131
Yes
14
KP_ROW1
C130
Yes
15
KP_ROW2
C129
Yes
16
KP_ROW3
C128
Yes
17
KP_ROW4
C127
Yes
18
KP_ROW5
C126
Yes
19
KP_ROW6
C125
Yes
20
KP_GND
GROUND
Yes
21
KP_GND
GROUND
Yes
22
KP_GND
GROUND
Yes
Table 7-4. J701 VOCON Board to Encryption Module
J701
Pin No.
6881094C31-C
Description
To/From
Accessible
on VOCON?
Q303 Pin 2
Yes
KEYFAIL_LH_BDMDATA
RS232_DIN_ENC
R308
Yes
RS232_DIN_UP
R308
Yes
RTSIN_ENC
U301 Pin H7
No
October 14, 2003
7-4
Troubleshooting Tables: List of Board and IC Signals
Table 7-4. J701 VOCON Board to Encryption Module (Continued)
J701
Pin No.
October 14, 2003
Description
To/From
Accessible
on VOCON?
RS232_DOUT_UP
R317
Yes
RS232_DOUT_ENC
R317
Yes
SW_B+_ENC
C101
Yes
Regulated V_ENC
No Connect
N/A
RS232_DTR_IN_ENC
No Connect
N/A
10
RS232_RI_OUT_EN
No Connect
N/A
11
USB_MINUS Monitor
No Connect
N/A
12
CONT_3VDC_OUT_ENC
No Connect
N/A
13
RS232_DCD_ENC
No Connect
N/A
14
USB_PLUS Monitor
No Connect
N/A
15
BOOT_ENC
R417
Yes
16
TAMPER
GROUND
Yes
17
SSI_DO_CODEC_ENC
R403
Yes
18
SSI_DI_CODEC_ENC
R402
Yes
19
RTA0_ENC
R246
Yes
20
RTA1_ENC
R247
Yes
21
RTA3_ENC
R251
Yes
22
RTA2_ENC
R250
Yes
23
TG2_ENC
R234
Yes
24
LHDATA_BDMDATA_KEYFAIL
D308 Pin 3
Yes
25
GREEN_LED_ENC
R204
Yes
26
WAKEUP
U401 Pin E1
No
27
TX_INHIBIT
R109
Yes
28
UCM_SS
U301 Pin G4
No
29
RED_LED_ENC
R203
Yes
30
RESET_ENC
R418
Yes
31
MONITOR
R244
Yes
32
SPARE1_ENC
R415
Yes
33
GROUND_ENC
GROUND
Yes
34
SPARE2_ENC
R416
Yes
35
EMERG_ENC
R241
Yes
6881094C31-C
Troubleshooting Tables: List of Board and IC Signals
7-5
Table 7-4. J701 VOCON Board to Encryption Module (Continued)
J701
Pin No.
Description
To/From
Accessible
on VOCON?
36
UNSW_B+_ENC
C102
Yes
37
ENC_SSI_CLK
R404
Yes
38
ENC_SSI_FS
R406
Yes
39
ENC_SSI_DI
R403
Yes
40
ENC_SSI_DOUT
R402
Yes
* = Component located under a shield on NNTN4563, NNTN4819, & NNTN4717
Table 7-5. U402 FLASH Pinouts
U402
Pin No.
6881094C31-C
To/From
B4
B_CLK
B_CLK**
E7
CS0
F8
EN_OE
No
C5
EN_WE
No
D6
WRITE PROTECT
No
C4
ADV
B5
RESET
E8
ADDRESS 1
No
D8
ADDRESS 2
No
C8
ADDRESS 3
No
B8
ADDRESS 4
No
A8
ADDRESS 5
No
B7
ADDRESS 6
No
A7
ADDRESS 7
No
C7
ADDRESS 8
No
A2
ADDRESS 9
No
B2
ADDRESS 10
No
C2
ADDRESS 11
No
A1
ADDRESS 12
No
B1
ADDRESS 13
No
C1
ADDRESS 14
No
CS0
Comment
Accessible
on Vocon?
Description
Yes
Active Low
ADV**
D401, pin 2
Yes
Yes
1.875 V
Yes
October 14, 2003
7-6
Troubleshooting Tables: List of Board and IC Signals
Table 7-5. U402 FLASH Pinouts (Continued)
U402
Pin No.
Description
D2
ADDRESS 15
No
D1
ADDRESS 16
No
D4
ADDRESS 17
No
B6
ADDRESS 18
No
A6
ADDRESS 19
No
C6
ADDRESS 20
No
B3
ADDRESS 21
No
C3
ADDRESS 22
No
D7
ADDRESS 23
A3
GROUND
No
F1
GROUND
No
G2
GROUND
No
G8
GROUND
No
E2
DATA 15
No
F2
DATA 14
No
F3
DATA 13
No
D5
DATA 12
No
F4
DATA 11
No
F5
DATA 10
No
F6
DATA 9
No
G7
DATA 8
No
G1
DATA 7
R435**
Yes
E3
DATA 6
R434**
Yes
G3
DATA 5
R433**
Yes
E4
DATA 4
R432**
Yes
G5
DATA 3
R431**
Yes
E5
DATA 2
R430**
Yes
E6
DATA 1
R429**
Yes
F7
DATA 0
R428**
Yes
A5
VPP
G6
VSW2
October 14, 2003
To/From
Comment
R427*
Accessible
on Vocon?
Yes
D402, pin 3
1.875 V
Yes
C409*
1.875 V
Yes
6881094C31-C
Troubleshooting Tables: List of Board and IC Signals
7-7
Table 7-5. U402 FLASH Pinouts (Continued)
U402
Pin No.
Description
To/From
Comment
Accessible
on Vocon?
E1
VSW2
C409*
1.875 V
Yes
G4
VSW2
C409*
1.875 V
Yes
A4
VSW2
C409*
1.875 V
Yes
* = Component located under a shield on NNTN4563, NNTN4819, & NNTN4717
** = No test point/component on NNTN4563, NNTN4819, & NNTN4717 - signal not
accessible
Table 7-6. U403 SRAM Pinouts
U403
Pin No.
6881094C31-C
Description
To/From
Comment
Accessible
on Vocon?
A2
EN_OE
No
G5
R_W
A1
LB
No
B2
UB
No
B5
CS1
CS2 (TP)
Active Low
Yes
A6
CS2
C411*
Active Low
Yes
A3
ADDRESS 1
Yes
A4
ADDRESS 2
Yes
A5
ADDRESS 3
Yes
B3
ADDRESS 4
Yes
B4
ADDRESS 5
Yes
C3
ADDRESS 6
Yes
C4
ADDRESS 7
Yes
D4
ADDRESS 8
No
H2
ADDRESS 9
No
H3
ADDRESS 10
No
H4
ADDRESS 11
No
H5
ADDRESS 12
No
G3
ADDRESS 13
No
G4
ADDRESS 14
No
F3
ADDRESS 15
No
F4
ADDRESS 16
No
R_W
W=0V
Yes
October 14, 2003
7-8
Troubleshooting Tables: List of Board and IC Signals
Table 7-6. U403 SRAM Pinouts (Continued)
U403
Pin No.
Description
E4
ADDRESS 17
No
D3
ADDRESS 18
No
H1
ADDRESS 19
No
D1
GROUND
No
E6
GROUND
No
E3
GROUND
No
H6
NOT USED
No
G2
NOT USED
No
G1
DATA 15
No
F1
DATA 14
No
F2
DATA 13
No
E2
DATA 12
No
D2
DATA 11
No
C2
DATA 10
No
C1
DATA 9
No
B1
DATA 8
No
G6
DATA 7
R435**
No
F6
DATA 6
R434**
No
F5
DATA 5
R433**
No
E5
DATA 4
R432**
No
D5
DATA 3
R431**
No
C6
DATA 2
R430**
No
C5
DATA 1
R429**
No
B6
DATA 0
R428**
No
D6
VSW2
C411*
1.875 V
Yes
E1
VSW2
C411*
1.875 V
Yes
To/From
Comment
Accessible
on Vocon?
* = Component located under a shield on NNTN4563, NNTN4819, & NNTN4717
** = No test point/component on NNTN4563, NNTN4819, & NNTN4717 - signal not
accessible
October 14, 2003
6881094C31-C
Troubleshooting Tables: List of Board and IC Signals
7-9
Table 7-7. U401 Patriot MCU/DSP IC Pinouts
6881094C31-C
U401
Pin No.
Description
To/From
Comment
Accessible
on Vocon?
H10
EEPOT_INC*
C537
Active Low
Yes
J14
EXT_SPKR_SEL
C14
AUDIO_PA_EN
B14
HOST_WAKE
F6
BATTERY_ID
E5
MECH_SW_BAR
J6
Q505, pin 5
Yes
R575
Yes
No
C556
Yes
Q508, pin 3
Active Low
Yes
INT_PTT
R216
Active Low
Yes
J5
GCAP_INT
R538
Yes
J4
OPT_SEL1_IN
U201 pin 1
Yes
J3
UART_INT*
C16
8KHZ_INT
G11
OPT_SEL2_IN
No
R406
8 kHz Pulse
Yes
U202 pin 1
Yes
F1
KP_ROW0
C131
Yes
H4
KP_ROW1
C130
Yes
H6
KP_ROW2
C129
Yes
G2
KP_ROW3
C128
Yes
G11
KP_ROW4
C127
Yes
G7
KP_ROW5
C126
Yes
H7
KP_ROW6
C125
Yes
H1
SPARE1_ENC
J701, pin 32
Yes
D1
KP_COL0
C134
Yes
G5
KP_COL1
C133
Yes
F3
KP_COL2
C132
Yes
G4
ENC_RESET
J701, pin 30
Yes
F2
BOOT*
J701, pin 15
Yes
E1
WAKEUP
J701, pin 26
Yes
H6
SPARE2_ENC
J701, pin 34
Yes
G3
NOT USED
No
E7
NOT USED
No
A8
NOT USED
No
F8
MISOA_SEL
U406, pin 2
Yes
October 14, 2003
7-10
Troubleshooting Tables: List of Board and IC Signals
Table 7-7. U401 Patriot MCU/DSP IC Pinouts (Continued)
U401
Pin No.
October 14, 2003
Description
To/From
Comment
Accessible
on Vocon?
E8
NOT USED
No
G8
NOT USED
No
C3
NOT USED
No
D4
LOCK_DET
C123
A2
TG2
R234
Yes
B2
RTA3
R241
Yes
A3
RTA2
R239
Yes
B3
RTA1
R236
Yes
B4
RTA0
R235
Yes
A7
VSW2
E401*
1.875 V
Yes
P3
VSW2
E401*
1.875 V
Yes
P6
VSW2
E401*
1.875 V
Yes
T9
VSW2
E401*
1.875 V
Yes
N10
VSW2
E401*
1.875 V
Yes
R16
VSW2
E401*
1.875 V
Yes
H9
V2
E402*
3.0 V
Yes
G9
V2
E402*
3.0 V
Yes
E15
V2
E402*
3.0 V
Yes
A16
V2
E402*
3.0 V
Yes
K10
V2
E402*
3.0 V
Yes
C12
V2
E402*
3.0 V
Yes
D8
V2
E402*
3.0 V
Yes
B7
V2
E402*
3.0 V
Yes
A4
V2
E402*
3.0 V
Yes
A16
V2
E402*
3.0 V
Yes
H2
V2
E402*
3.0 V
Yes
K3
VSW2
E401*
1.875 V
Yes
R8
VSW2
E401*
1.875 V
Yes
G15
VSW2
E401*
1.875 V
Yes
C10
VSW2
E401*
1.875 V
Yes
K12
URXD1_USB_VMI
Active Low
Yes
No
6881094C31-C
Troubleshooting Tables: List of Board and IC Signals
7-11
Table 7-7. U401 Patriot MCU/DSP IC Pinouts (Continued)
6881094C31-C
U401
Pin No.
Description
L16
URTS1_XRXD
No
F13
ADTRIG
No
B16
URXD2
D14
BSY_IN_RTS
B12
RX_SSI_DATA
R123
Data From
Abacus to
DSP
Yes
C11
TX_SSI_CLK
R125
1.536 MHz
Yes
B10
RED_LED
Q201, pin 3
Active High
Yes
D10
GREEN_LED
Q201, pin 5
Active High
Yes
B11
TX_SSI_FSYNC
R119
48 kHz
Yes
J10
CODEC_TX
R402
GCAP to DSP
Tx Audio Data
Yes
J15
CODEC_DCLK
R405
520 kHz
(NTN9564
NNTN4563
NNTN4819)
256 kHz
(NNTN4717)
Yes
K16
CODEC_FSYNC
R406
8 kHz Pulse
Yes
D7
SPI_MISOA
MISOA
SPI A Data In
Yes
D3
SPI_MISOB
MISOB
SPI B Data In
Yes
E6
NOT USED
No
F7
NOT USED
No
D6
EEPROM_SEL*
R132
Active Low
Yes
C5
AD_CS*
R133
Active Low
Yes
A9
NOT USED
No
B8
NOT USED
No
B9
NOT USED
No
A10
NOT USED
No
G6
BT_DISABLE
No
D13
NOT USED
No
S15
BT_WAKE
No
F11
RX_SSI_CLK
To/From
Comment
U303, pin 4
Accessible
on Vocon?
Yes
No
R124
Yes
October 14, 2003
7-12
Troubleshooting Tables: List of Board and IC Signals
Table 7-7. U401 Patriot MCU/DSP IC Pinouts (Continued)
U401
Pin No.
October 14, 2003
Description
To/From
Comment
Accessible
on Vocon?
B15
OPT_SEL2_OUT
R256
Yes
J13
AUDIO_MODE_SEL
R257
Yes
J16
EEPOT_CS_EXT*
U509, pin 1
Yes
J12
EEPOT_U_D*
U509, pin 2
Yes
H11
EEPOT_CS*
U509, pin 10
Yes
A5
GROUND
GROUND
Yes
N6
GROUND
GROUND
Yes
P8
GROUND
GROUND
Yes
P11
GROUND
GROUND
Yes
M11
GROUND
GROUND
Yes
L15
GROUND
GROUND
Yes
H16
GROUND
GROUND
Yes
F14
GROUND
GROUND
Yes
G14
GROUND
GROUND
Yes
E13
GROUND
GROUND
Yes
B13
GROUND
GROUND
Yes
K15
GROUND
GROUND
Yes
D9
GROUND
GROUND
Yes
C8
GROUND
GROUND
Yes
B5
GROUND
GROUND
Yes
C2
GROUND
GROUND
Yes
C1
GROUND
GROUND
Yes
H3
GROUND
GROUND
Yes
K15
GROUND
GROUND
Yes
T8
GROUND
GROUND
Yes
H15
GROUND
GROUND
Yes
C9
GROUND
GROUND
Yes
B6
ABACUS_CS*
R126
Active Low
Yes
E2
UNI_SEL*
R131
Active Low
Yes
D2
FLPR_CS*
Active Low
No
E3
GCAP_CE
Active High
Yes
R539
6881094C31-C
Troubleshooting Tables: List of Board and IC Signals
7-13
Table 7-7. U401 Patriot MCU/DSP IC Pinouts (Continued)
U401
Pin No.
6881094C31-C
Description
To/From
Comment
Accessible
on Vocon?
SCKB
SPI B Clock
Yes
E4
SCKB
B1
NOT USED
No
F4
NOT USED
No
F5
SPI_MOSIB
MOSIB
SPI Data Out
Yes
C7
SCKA
SCKA
SPI A Clock
Yes
C6
MOSIA
MOSIA
SPI Data Out
Yes
G10
NOT USED
No
G16
OPT_SEL1_OUT
J11
CODEC_RX
R403
DSP to GCAP
Rx Audio Data
Yes
A12
RX_SSI_FSYNC
R123
20 kHz pulse
Yes
A11
RX_SSI_CLK
R124
1.2 MHz
Yes
E9
TX_SSI_DATA
R127
Data From
DSP to A/D
Yes
U201, pin 3
Yes
C15
BSY_OUT_CTS*
No
F12
UTXD2
D15
USB_SUSP
E14
DISPLAY_R_W*
D16
NOT USED
No
G12
UCTS1_USB_SPEED*
No
K11
UTXD1_USB_VPO
No
K14
USB_VMO
No
K13
USB_TX_EN
No
D5
8 KHZ_INT
R406
H14
BL_EN
C124
K4
LV_DETECT
POR
F9
NOT USED
No
J2
NOT USED
No
A6
16_8_MHZ
U303, pin 1*
Yes
No
D403, pin 3
C452*
W=0V
8 kHz Pulse
Yes
Yes
Yes
3.0 V
16.8 MHz
Yes
Yes
October 14, 2003
7-14
Troubleshooting Tables: List of Board and IC Signals
Table 7-7. U401 Patriot MCU/DSP IC Pinouts (Continued)
U401
Pin No.
J7
October 14, 2003
Description
FLIP_32K
To/From
Comment
Accessible
on Vocon?
32 kHZ
(NTN9564)
U302, pin 2*
(NNTN4563
NNTN4819
NNTN4717)
32.768 kHz
Yes
G13
NOT USED
No
J11
MOD
A13
NOT USED
No
M6
NOT USED
No
R1
NOT USED
No
N3
NOT USED
No
M5
NOT USED
No
P2
NOT USED
No
P1
NOT USED
No
N1
NOT USED
No
M4
NOT USED
No
M3
NOT USED
No
M2
NOT USED
No
M1
NOT USED
No
L4
NOT USED
No
L3
NOT USED
No
L1
NOT USED
No
L2
NOT USED
No
K2
NOT USED
No
T1
NOT USED
No
R2
NOT USED
No
T2
NOT USED
No
K7
NOT USED
No
N2
NOT USED
No
L5
NOT USED
No
L6
NOT USED
No
C4
NOT USED
No
MOD
Bootstrap
mode > 2.7 V
Yes
6881094C31-C
Troubleshooting Tables: List of Board and IC Signals
7-15
Table 7-7. U401 Patriot MCU/DSP IC Pinouts (Continued)
U401
Pin No.
6881094C31-C
Description
To/From
Comment
Accessible
on Vocon?
L13
NOT USED
No
D11
ONE_WIRE_EN*
Active Low
No
E16
KVL_USB_DET*
Active Low
No
F15
NOT USED
K5
BAT_BUS_EN*
H8
NOT USED
F16
RESET
K6
USB_VPI
H12
BL_FREQ
H13
NOT USED
E10
DSP_DE
DSP_DE
ONCE/JTAG
Yes
F10
MCU_DE
MCU_DE
ONCE/JTAG
Yes
D12
TCK
TCK
ONCE/JTAG
Yes
C13
TMS
TMS
ONCE/JTAG
Yes
E11
TRST
TRST
ONCE/JTAG
Yes
A14
TDO
TDO
ONCE/JTAG
Yes
E12
TDI
TDI
ONCE/JTAG
Yes
M16
NOT USED
No
L14
NOT USED
No
P15
NOT USED
No
L11
NOT USED
No
M14
NOT USED
No
N16
NOT USED
No
L12
NOT USED
No
M12
CKO
N15
NOT USED
No
M15
NOT USED
No
No
Q507, pin 2
Active Low
Yes
No
RESET_OUT
(NTN9564)
D401, Pin 3
(NNTN4563
NNTN4819,
NNTN4717)
Reset = 0 V
Yes
No
Q202, pin 5
Active High
Yes
No
CKO
Disabled
Yes
October 14, 2003
7-16
Troubleshooting Tables: List of Board and IC Signals
Table 7-7. U401 Patriot MCU/DSP IC Pinouts (Continued)
U401
Pin No.
Description
To/From
Comment
R12
ADDRESS 0
J101, pin 7
Not accessible
on NNTN4563,
NNTN4819, &
NNTN4717
T13
ADDRESS 1
No
M10
ADDRESS 2
No
T12
ADDRESS 3
No
P13
ADDRESS 4
No
M9
ADDRESS 5
No
P10
ADDRESS 6
No
P12
ADDRESS 7
No
N9
ADDRESS 8
No
R10
ADDRESS 9
No
P9
ADDRESS 10
No
L10
ADDRESS 11
No
T10
ADDRESS 12
No
R9
ADDRESS 13
No
L9
ADDRESS 14
No
K9
ADDRESS 15
No
J9
ADDRESS 16
No
L8
ADDRESS 17
No
M8
ADDRESS 18
No
N8
ADDRESS 19
No
K8
ADDRESS 20
No
L7
ADDRESS 21
No
T7
ADDRESS 22
No
R7
ADDRESS 23
R3
DATA 15
No
T3
DATA 14
No
N4
DATA 13
No
P4
DATA 12
No
R4
DATA 11
No
October 14, 2003
R427*
Accessible
on Vocon?
Yes
Yes
6881094C31-C
Troubleshooting Tables: List of Board and IC Signals
7-17
Table 7-7. U401 Patriot MCU/DSP IC Pinouts (Continued)
U401
Pin No.
Description
To/From
Comment
Accessible
on Vocon?
J8
DATA 10
No
T4
DATA 9
No
N5
DATA 8
No
P5
DATA 7
R435**
Yes
R5
DATA 6
R434**
Yes
T5
DATA 5
R433**
Yes
R6
DATA 4
R432**
Yes
T6
DATA 3
R431**
Yes
M7
DATA 2
R430**
Yes
N7
DATA 1
R429**
Yes
P7
DATA 0
R428**
Yes
N11
R_W
R_W
Yes
T11
NOT USED
No
R14
NOT USED
No
N12
CS3*
R106**
Active Low
Yes
T14
CS2
CS2
Active Low
Yes
R11
NOT USED
R15
CS0
P16
OE_EN
No
M13
EB1_N
No
R13
EBO_N
No
N14
NOT USED
No
T16
WAIT
P14
NOT USED
N13
ADV
T15
B_CLK
No
CS0
WAIT**
Active Low
Yes
Yes
No
ADV**
Yes
B_CLK**
Yes
* = Component located under a shield on NNTN4563, NNTN4819, & NNTN4717
** = No test point/component on NNTN4563, NNTN4819, & NNTN4717 - signal not
accessible
6881094C31-C
October 14, 2003
7-18
Troubleshooting Tables: List of Board and IC Signals
Table 7-8. U301 Flipper IC Pinouts
U301
Pin No.
October 14, 2003
Description
To/From
Comment
Accessible
on Vocon?
E7
RXDIN_ENC_3V
R308
Yes
D5
TXDO_BDI_5V
R329*
5 V RS232
Data Out
Yes
C7
RXDIN_5V
R328*
5 V RS232
Data In
Yes
A8
RTS
D303 pin 3
Request to
Send (RS232)
Yes
D7
CTS
R303
Clear to Send
(RS232)
Yes
H8
CTS_FILLREQ_3V
R306**
H3
16.8 MHz
C307*
16.8 MHz
Clock
Yes
H6
13 MHz
R302
R331*
13 MHz Clock
(OUT)
Yes
H5
PLL_LFT
C302*
PLL Loop
Filter
Yes
F4
CODEC_DCLK
R405
520 kHz
Yes
E5
CODEC_FSYNC
R406
8 kHz Pulse
Yes
G4
UCM_SS
G2
V2
C304*
3.0 V
Yes
F1
V2
C317*
3.0 V
Yes
F3
VSS3_DC
GROUND
Yes
F2
VSS3_AC
GROUND
Yes
D8
VCC5
C305*
C8
VSS5
GROUND
A7
LI_CELL
C6
VSS3_XTL
GROUND
Yes
A4
UART_TX
NC
No
C4
UART_RX
NC
No
G3
ONE_WIRE_UP
No
G7
KVL_USB_DET
No
G1
ONE_WIRE_EN*
No
B5
BSY_IN_RTS
No
C5
BSY_OUT_CTS
No
E4
UCTS1_USB_SPEED*
No
C1
USB_TXENAB
No
Yes
J701 pin 28
C312*
Yes
5.0 V
Yes
Yes
3.0-3.3 V
Yes
6881094C31-C
Troubleshooting Tables: List of Board and IC Signals
7-19
Table 7-8. U301 Flipper IC Pinouts (Continued)
U301
Pin No.
6881094C31-C
Description
To/From
Comment
Accessible
on Vocon?
D1
UTXD1_USP_VPO
No
B1
USB_VMO
No
C3
URTS1_XRXD
No
C2
USB_VPI
No
D2
URXD1_USB_VMI
No
E3
USB_SUSP
No
B2
SCKB
SCKB
SPI B Clock
Yes
B3
SPI_MOSIB
MOSIB
SPI Data Write
to Flipper IC
Yes
A2
SPI_MISOB
MISOA
SPI Data Read
from Flipper IC
Yes
A1
FLPR_CS*
No
A3
UART_INT*
No
F5
GCAP_RESET_X
H4
C310*
Yes
TEST_MODE1
GROUND
Yes
H1
TES_MODE2
GROUND
Yes
G6
OUT_DIS
GROUND
Yes
G5
SCAN_EN
GROUND
Yes
A6
XTAL32_IN
Yes
B6
XTAL32_OUT
Yes
A5
REF32_OUT
R316
B7
BYPASS_32
GROUND
B4
BP_SEN_X
R510
0V
Yes
D4
WD_OUT
R528
Watchdog Int
to GCAP II
Yes
H2
ONE_WIRE_OPT
D6
SB96D_BDO_KF_5V
B8
32.768 kHz
Square Wave
Yes
Yes
D306 pin 3
Yes
NC
No
LH_BUSY
D307 pin 3
Yes
D3
USB_DIS
R310*
Yes
E2
USB_DPLUS
Q301 pin 1*
USB Data Plus
Yes
E1
USB_DMINUS
Q301 pin 4*
USB Data
Minus
Yes
E8
SB96D_BDO_KF_3V
F6
SB96D_BDO_3V
NC
No
D308 pin 3
Yes
October 14, 2003
7-20
Troubleshooting Tables: List of Board and IC Signals
Table 7-8. U301 Flipper IC Pinouts (Continued)
U301
Pin No.
Description
To/From
Comment
Accessible
on Vocon?
H7
RTS_FILLSEN_3V
NC
No
G8
CTS_FILLREQ_3V
R309*
Yes
F8
TXDO_BDI_ENC_3V
R317
Yes
F7
TXDO_BDI_UP_3V
R317
Yes
E6
RXDIN_ENC_3V
R308
Yes
* = Component located under a shield on NNTN4563, NNTN4819, & NNTN4717
** = No test point/component on NNTN4563, NNTN4819, & NNTN4717 - signal not
accessible
Table 7-9. U501 GCAP II IC Pinouts
U501
Pin No.
October 14, 2003
Description
To/From
Comment
Accessible
on Vocon?
A2
AD4_BD_ID
R525
Yes
B2
AD3_BDTYPE
R524
Yes
B3
AD2_BAT_STAT
R568
Yes
A3
AD_TG1
R523
Yes
D4
AD0_EMERG
R522
Yes
C4
LV_DETECT
R511
B4
AD_TRIG
A4
CONV_BYP
C516
B5
V3
C550
Unused
Voltage
Regulator
Yes
A5
VIN3
C515
3.77 V
Yes
D5
VSEN1
GROUND
0V
Yes
C5
VSIN
C515
3.77 V
Yes
C6
VSIM1
C551
Unused
Voltage
Regulator
Yes
A6
V1
C552
Unused
Voltage
Regulator
Yes
B6
VIN1
B503
7.5V
Yes
D6
LI_CELL
C553
3.0-3.3V
Yes
D7
CHARGE
NC
Active Low
Yes
No
Yes
No
6881094C31-C
Troubleshooting Tables: List of Board and IC Signals
7-21
Table 7-9. U501 GCAP II IC Pinouts (Continued)
U501
Pin No.
To/From
Comment
G_32K
32.768 kHz
Square Wave
Accessible
on Vocon?
A7
XTAL1
B7
XTAL2
A8
PRSC2
C514
3.77V
Yes
B8
LX2
D502
262.144 kHz
Square Wave
Yes
A9
PGND1
B9
FB2
R501
C8
ON
R579
A10
FB1
R502
3.77V
Yes
B10
LX1
D503
262.144 kHz
Square Wave
Yes
C9
PWRON
C529
At Battery
Voltage Level
Yes
D8
INT_EXT
GROUND
C10
PSRC1
C531
At Battery
Voltage Level
Yes
WDI
R576
3.0V
Yes
D10
MOSPORTB
C529
At Battery
Voltage Level
Yes
D9
ISENSE
NC
No
E8
CHRGC
NC
No
E9
SQ_OUT
NC
No
E10
BPOS
E7
6881094C31-C
Description
Yes
No
GROUND
C529
Yes
1.85V
Yes
Yes
Yes
At Battery
Voltage Level
Yes
F7
BATTERY
NC
No
F8
AUX_BAT
NC
No
F9
AUX_FET
NC
No
F10
MAIN_FET
NC
No
E6
PGM2
C529
At Battery
Voltage Level
Yes
G8
PGM1
C529
At Battery
Voltage Level
Yes
G10
AGND1
G9
REF
GROUND
C528
Yes
3.0V
Yes
October 14, 2003
7-22
Troubleshooting Tables: List of Board and IC Signals
Table 7-9. U501 GCAP II IC Pinouts (Continued)
U501
Pin No.
October 14, 2003
Description
To/From
Comment
Accessible
on Vocon?
H9
PA_DRV
NC
No
H10
PA_SENSE
NC
No
G7
PGM0
GROUND
Yes
H8
LS3_RX
NC
No
J10
DGND
GROUND
Yes
K10
LS3TX_PABPOS
GROUND
Yes
K1
MIC_OUT
U509 pin 6
AC Mic Signal
Yes
G4
STANDBY
R557
3.0V
Yes
K2
AUX_OUT
U509 pin 6
AC Mic Signal
Yes
H3
AUX_MIC_NEG
C538
Virtual Ground
Yes
J3
MB_CAP
C535
Yes
H4
EXT_MIC
NC
No
K3
MIC_BIAS
C535
Yes
J4
CD_CAP
C543
Yes
K4
VAG
C544
Yes
J5
V2
R560
3.0V
Yes
K5
VIN2
R502
3.77V
Yes
G5
ON2
NC
H5
EXTOUT
K6
SPKR_OUT
NC
No
J6
SPKR_IN
NC
No
H6
SPKR_NEG
NC
No
H7
SPKR_POS
NC
No
K7
LS1IN_TG1A
GROUND
Yes
J7
LS1OUT_TG1
NC
No
G6
LS2IN_TG2A
GROUND
Yes
F6
LS2OUT_TG2
No
K8
ALRT_GND
No
K9
ALRT_OUT
NC
No
J9
ALRT_VCC
NC
No
C533
No
AC RX Audio
Signal
Yes
6881094C31-C
Troubleshooting Tables: List of Board and IC Signals
7-23
Table 7-9. U501 GCAP II IC Pinouts (Continued)
U501
Pin No.
6881094C31-C
Description
J8
SIMI_O
A1
AD5_VOLUME
B1
AGND3
C3
DWN_OUT
C2
DWN_IN
C1
To/From
Comment
NC
R526
Accessible
on Vocon?
No
0-2.5V
Yes
GROUND
Yes
NC
No
GROUND
Yes
CMP_OUT
NC
No
D3
DSC_INN
GROUND
Yes
D2
DSC_INP
GROUND
Yes
D1
SPI_CLK
SCKB
SPI Data
Clock
Yes
E4
SPI_DR
MISOB
SPI Data Read
From GCAP
Yes
E3
SPI_DW
MOSIB
SPI Data Write
To GCAP
Yes
E2
SR_VCCIN
NC
No
E1
SR_VCCOUT
NC
No
F3
SR_IN
NC
No
F2
SR_OUT
NC
No
F1
INTERRUPT
R538
GCAP
Interrupt
Yes
F4
CE
R539
Active High
GCAP Chip
EN
Yes
F5
CLK_IN
R302
R331*
13 MHz
Yes
E5
CODEC_DCLK
R405
520 kHz
(NTN9564
NNTN4563
NNTN4819)
256 kHz
(NNTN4717)
Yes
G1
CODEC_TX
R402
TX Audio Data
To DSP
Yes
G2
CODEC_RX
R403
RX Audio Data
From DSP
Yes
G3
CODEC_FSYNC
R406
8 kHz Frame
Sync
Yes
October 14, 2003
7-24
Troubleshooting Tables: List of Board and IC Signals
Table 7-9. U501 GCAP II IC Pinouts (Continued)
U501
Pin No.
Comment
Accessible
on Vocon?
Description
To/From
H1
AGND4
GROUND
Yes
J1
AGND2
GROUND
Yes
H2
MICIN_POS
C534
Yes
J2
MICIN_NEG
Virtual Ground
No
* = Component located under a shield on NNTN4563, NNTN4819, & NNTN4717
October 14, 2003
6881094C31-C
8-150
Schematics, Board Overlays, and Parts Lists: VOCON Boards
Notes
October 14, 2003
6881094C31-C
Appendix A
A.1
Replacement Parts Ordering
Basic Ordering Information
When ordering replacement parts or equipment information, the complete identification number
should be included. This applies to all components, kits, and chassis. If the component part number
is not known, the order should include the number of the chassis or kit of which it is a part, and
sufficient description of the desired component to identify it.
Crystal orders should specify the crystal type number, crystal and carrier frequency, and the model
number in which the part is used.
A.2
Transceiver Board and VOCON Board Ordering Information
When ordering a replacement Transceiver Board or VOCON Board, refer to the applicable Model
Chart in the front of this manual, read the Transceiver Board or VOCON Board note, and include the
proper information with your order.
A.3
Motorola Online
Motorola Online users can access our online catalog at
https://www.motorola.com/businessonline
To register for online access, please call 800-814-0601 (for U.S. and Canada Service Centers only).
International customers can obtain assistance at https://businessonline.motorola.com.
A.4
Mail Orders
Send written orders to the following addresses:
Replacement Parts/
Test Equipment/Manuals/
Crystal Service Items
(United States and Canada):
Federal Government Orders:
International Orders:
Motorola Inc.
Radio Products Services Division*
Attention: Order Processing
1307 E. Algonquin Road
Schaumburg, IL 60196
U.S.A.
Motorola Inc.
U.S. Federal Government
Markets Division
Attention: Order Processing
7230 Parkway Drive
Landover, MD 21076
U.S.A.
Motorola Inc.
Radio Products Services Division*
(United States and Canada)
Attention: Order Processing
1307 E. Algonquin Road
Schaumburg, IL 60196
U.S.A.
* The Radio Products Services Division (RPSD) was formerly known as the Customer Care and
Services Division (CCSD) and/or the Accessories and Aftermarket Division (AAD).
A-2
A.5
Replacement Parts Ordering: Telephone Orders
Telephone Orders
Radio Products Services Division*
(United States and Canada)
7:00 AM to 7:00 PM (Central Standard Time)
Monday through Friday (Chicago, U.S.A.)
1-800-422-4210
(International Orders)
1-847-538-8023
U.S. Federal Government Markets Division (USFGMD)
1-800-826-1913 Federal Government Parts - Credit Cards Only
8:30 AM to 5:00 PM (Eastern Standard Time)
A.6
Fax Orders
Radio Products Services Division*
(United States and Canada)
1-800-622-6210
(International)
1-847-576-3023
USFGMD
(Federal Government Orders)
1-800-526-8641 (For Parts and Equipment Purchase Orders)
A.7
Parts Identification
Radio Products Services Division*
(United States and Canada)
1-800-422-4210, menu 3
A.8
Product Customer Service
Customer Response Center
(Non-technical Issues)
1-800-247-2346
FAX:1-800-247-2347
* The Radio Products Services Division (RPSD) was formerly known as the Customer Care and
Services Division (CCSD) and/or the Accessories and Aftermarket Division (AAD).
October 14, 2003
6881094C31-C
Glossary
Glossary
This glossary contains an alphabetical listing of terms and their definitions that are applicable to
ASTRO portable and mobile subscriber radio products. All terms do not necessarily apply to all
radios, and some terms are merely generic in nature.
Term
Definition
A/D
See analog-to-digital conversion.
Abacus IC
A custom integrated circuit providing a digital receiver intermediate
frequency (IF) backend.
ADC
See analog-to-digital converter.
ADDAG
See Analog-to-Digital, Digital-to-Analog and Glue.
ALC
See automatic level control.
analog
Refers to a continuously variable signal or a circuit or device designed
to handle such signals. See also digital.
Analog-to-Digital,
Digital-to-Analog
and Glue
An integrated circuit designed to be an interface between the radio’s
DSP, which is digital, and the analog transmitter and receiver ICs.
analog-to-digital
conversion
Conversion of an instantaneous dc voltage level to a corresponding
digital value. See also D/A.
analog-to-digital
converter
A device that converts analog signals into digital data. See also DAC.
automatic level
control
A circuit in the transmit RF path that controls RF power amplifier output,
provides leveling over frequency and voltage, and protects against high
VSWR.
band
Frequencies allowed for a specific purpose.
BBP
See baseband interface port.
baseband interface
port
Synchronous serial interface to the transceiver board used to transfer
transmit and receive audio data.
BGA
See ball grid array.
ball grid array
A type of IC package characterized by solder balls arranged in a grid
that are located on the underside of the package.
CODEC
See coder/decoder.
Glossary-2
Term
Definition
codeplug
Firmware that contains the unique personality for a system or device. A
codeplug is programmable and allows changes to system and unit
parameters. See also firmware.
coder/decoder
A device that encodes or decodes a signal.
CPS
See Customer Programming Software.
Customer
Programming
Software
Software with a graphical user interface containing the feature set of an
ASTRO radio. See also RSS.
D/A
See digital-to-analog conversion.
DAC
See digital-to-analog converter.
Data communication
equipment
Definition for device (such as radio) data communications using the
RS232 protocol. The correct data communication wiring requires the
device’s TX pins (output) to connect to the RX pins (input) and the RTS
pins (output) to connect to the CTS pins (input). It is incorrect to attach
device pins having the same name to to each other.
Data terminal
equipment
Data terminal equipment; for example, a computer.
DCE
See Data communication equipment.
default
A pre-defined set of parameters.
digital
Refers to data that is stored or transmitted as a sequence of discrete
symbols from a finite set; most commonly this means binary data
represented using electronic or electromagnetic signals. See also
analog.
digital-to-analog
conversion
Conversion of a digital signal to a voltage that is proportional to the input
value. See also A/D.
digital-to-analog
converter
A device that converts digital data into analog signals. See also ADC.
Digital Private-Line
A type of digital communication that utilizes privacy call, as well as
memory channel and busy channel lock-out to enhance communication
efficiency.
digital signal
processor
A microcontroller specifically designed for performing the mathematics
involved in manipulating analog information, such as sound, that has
been converted into a digital form. DSP also implies the use of a data
compression technique.
digital signal
processor code
Object code executed by the Digital Signal Processor in an ASTRO
subscriber radio. The DSP is responsible for computation-intensive
tasks, such as decoding ASTRO signaling.
October 14, 2003
6881094C31-C
Glossary-3
Term
Definition
DPL
See Digital Private-Line. See also PL.
DSP
See digital signal processor.
DSP code
See digital signal processor code.
DTE
See Data terminal equipment.
DTMF
See dual tone multi-frequency.
dual tone multifrequency
The system used by touch-tone telephones. DTMF assigns a specific
frequency, or tone, to each key so that it can easily be identified by a
microprocessor.
EEPOT
Electrically Programmable Digital Potentiometer.
EEPROM
See Electrically Erasable Programmable Read-Only Memory.
Electrically Erasable
Programmable
Read-Only Memory
A special type of PROM that can be erased by exposing it to an
electrical charge. An EEPROM retains its contents even when the
power is turned off.
FCC
Federal Communications Commission.
firmware
Code executed by an embedded processor such as the Host or DSP in
a subscriber radio. This type of code is typically resident in non-volatile
memory and as such is more difficult to change than code executed
from RAM.
FGU
See frequency generation unit.
flash
A non-volatile memory device similar to an EEPROM. Flash memory
can be erased and reprogrammed in blocks instead of one byte at a
time.
FLASHcode
A 13-digit code which uniquely identifies the System Software Package
and Software Revenue Options that are enabled in a particular
subscriber radio. FLASHcodes are only applicable for radios which are
upgradeable through the FLASHport process.
FLASHport
A Motorola term that describes the ability of a radio to change memory.
Every FLASHport radio contains a FLASHport EEPROM memory chip
that can be software written and rewritten to, again and again.
FMR
See Florida Manual Revision.
Florida Manual
Revision
A document that provides interim updates to a publication until the
entire publication can be updated and reissued.
frequency
Number of times a complete electromagnetic-wave cycle occurs in a
fixed unit of time (usually one second).
6881094C31-C
October 14, 2003
Glossary-4
Term
Definition
frequency
generation unit
This unit generates ultra-stable, low-phase noise master clock and other
derived synchronization clocks that are distributed throughout the
communication network.
General-Purpose
Input/Output
Pins whose function is programmable.
GPIO
See General-Purpose Input/Output.
host code
Object code executed by the host processor in an ASTRO subscriber
radio. The host is responsible for control-oriented tasks such as
decoding and responding to user inputs.
IC
See integrated circuit.
IF
Intermediate Frequency.
IMBE
A sub-band, voice-encoding algorithm used in ASTRO digital voice.
inbound signaling
word
Data transmitted on the control channel from a subscriber unit to the
central control unit.
integrated circuit
An assembly of interconnected components on a small semiconductor
chip, usually made of silicon. One chip can contain millions of
microscopic components and perform many functions.
ISW
See inbound signaling word.
keep-alive mode
A software-controlled operational mode in which power for the radio
remains on after the On/Off/volume control knob is turned off to allow
the microcontroller unit to complete its power-down sequence. Then,
the radio completely powers off.
key-variable loader
A device used to load encryption keys into a radio.
kHz
See kilohertz.
kilohertz
One thousand cycles per second. Used especially as a radio-frequency
unit.
KVL
See key-variable loader.
LCD
See liquid-crystal display.
LED
See light emitting diode.
light emitting diode
An electronic device that lights up when electricity is passed through it.
liquid-crystal display
An LCD uses two sheets of polarizing material with a liquid-crystal
solution between them. An electric current passed through the liquid
causes the crystals to align so that light cannot pass through them.
LO
Local oscillator.
October 14, 2003
6881094C31-C
Glossary-5
Term
Definition
low-speed
handshake
150-baud digital data sent to the radio during trunked operation while
receiving audio.
LSH
See low-speed handshake.
Master In Slave Out
SPI data line from a peripheral to the MCU.
Master Out Slave In
SPI data line from the MCU to a peripheral.
MCU
See microcontroller unit.
MDC
Motorola Digital Communications.
MDI
MCU/DSP Interface internal to the Patriot IC.
MHz
See Megahertz.
Megahertz
One million cycles per second. Used especially as a radio-frequency
unit.
microcontroller unit
Also written as µC. A microprocessor that contains RAM and ROM
components, as well as communications and programming components
and peripherals.
MISO
See Master In Slave Out.
MOSI
See Master Out Slave In.
multiplexer
An electronic device that combines several signals for transmission on
some shared medium (e.g., a telephone wire).
MUX
See multiplexer.
NiCd
Nickel-cadmium.
NiMH
Nickel-metal-hydride.
OMPAC
See over-molded pad-array carrier.
open architecture
A controller configuration that utilizes a microprocessor with extended
ROM, RAM, and EEPROM.
oscillator
An electronic device that produces alternating electric current and
commonly employs tuned circuits and amplifying components.
OSW
See outbound signaling word.
OTAR
See over-the-air rekeying.
outbound signaling
word
Data transmitted on the control channel from the central controller to the
subscriber unit.
over-molded padarray carrier
A Motorola custom IC package, distinguished by the presence of solder
balls on the bottom pads.
6881094C31-C
October 14, 2003
Glossary-6
Term
Definition
over-the-air rekeying
Allows the dispatcher to remotely reprogram the encryption keys in the
radio.
PA
Power amplifier.
paging
One-way communication that alerts the receiver to retrieve a message.
Patriot IC
A dual-core processor that contains an MCU and a DSP in one IC
package.
PC Board
Printed Circuit Board. Also referred to as a PCB.
phase-locked loop
A circuit in which an oscillator is kept in phase with a reference, usually
after passing through a frequency divider.
PL
See private-line tone squelch.
PLL
See phase-locked loop.
private-line tone
squelch
A continuous sub-audible tone that is transmitted along with the carrier.
See also DPL.
Programmable
Read-Only Memory
A memory chip on which data can be written only once. Once data has
been written onto a PROM, it remains there forever.
PROM
See Programmable Read-Only Memory.
PTT
See Push-to-Talk.
Push-to-Talk
The switch or button usually located on the left side of the radio which,
when pressed, causes the radio to transmit. When the PTT is released,
the unit returns to receive operation.
radio frequency
The portion of the electromagnetic spectrum between audio sound and
infrared light (approximately 10 kHz to 10 GHz).
radio frequency
power amplifier
Amplifier having one or more active devices to amplify radio signals.
Radio Interface Box
A service aid used to enable communications between a radio and the
programming software.
Radio Service
Software
DOS-based software containing the feature set of an ASTRO radio. See
also CPS.
RAM
See random access memory.
random access
memory
A type of computer memory that can be accessed randomly; that is, any
byte of memory can be accessed without touching the preceding bytes.
read-only memory
A type of computer memory on which data has been prerecorded. Once
data has been written onto a ROM chip, it cannot be removed and can
only be read.
October 14, 2003
6881094C31-C
Glossary-7
Term
Definition
real-time clock
A module that keeps track of elapsed time even when a computer is
turned off.
receiver
Electronic device that amplifies RF signals. A receiver separates the
audio signal from the RF carrier, amplifies it, and converts it back to the
original sound waves.
registers
Short-term data-storage circuits within the microcontroller unit or
programmable logic IC.
repeater
Remote transmit/receive facility that re-transmits received signals in
order to improve communications range and coverage (conventional
operation).
repeater/talkaround
A conventional radio feature that permits communication through a
receive/transmit facility, which re-transmits received signals in order to
improve communication range and coverage.
RESET
Reset line: an input to the microcontroller that restarts execution.
RF
See radio frequency.
RF PA
See radio frequency power amplifier.
RIB
See Radio Interface Box.
ROM
See read-only memory.
RPCIC
Regulator/power control IC.
RSS
See Radio Service Software.
RTC
See real-time clock.
RX
Receive.
RX DATA
Recovered digital data line.
SAP
See Serial Audio CODEC Port.
SCI IN
See Serial Communication Interface Input Line.
Serial Audio CODEC
Port
SSI to and from the GCAP II IC CODEC used to transfer transmit and
receive audio data.
Serial
Communication
Interface Input Line
A full-duplex (receiver/transmitter) asynchronous serial interface.
Serial Input/Output
IC
An integrated circuit that provides SB9600 serial and power-control
functions.
Serial Peripheral
Interface
How the microcontroller communicates to modules and ICs through the
CLOCK and DATA lines.
6881094C31-C
October 14, 2003
Glossary-8
Term
Definition
signal
An electrically transmitted electromagnetic wave.
Signal Qualifier
mode
An operating mode in which the radio is muted, but still continues to
analyze receive data to determine RX signal type.
SIO IC
See Serial Input/Output IC.
Smart Radio
Interface Box
A service aid containing microcontroller buffered RAM that enhances
the speed and capability of programming a radio with programming
software.
softpot
See software potentiometer.
software
Computer programs, procedures, rules, documentation, and data
pertaining to the operation of a system.
software
potentiometer
A computer-adjustable electronic attenuator.
spectrum
Frequency range within which radiation has specific characteristics.
SPI
See Serial Peripheral Interface.
squelch
Muting of audio circuits when received signal levels fall below a predetermined value. With carrier squelch, all channel activity that exceeds
the radio’s preset squelch level can be heard.
SRAM
See static RAM.
SRIB
See Smart Radio Interface Box.
SSI
See Synchronous Serial Interface.
Standby mode
An operating mode in which the radio is muted but still continues to
monitor data.
static RAM
A type of memory used for volatile, program/data memory that does not
need to be refreshed.
Synchronous Serial
Interface
DSP interface to peripherals that consists of a clock signal line, a frame
synchronization signal line, and a data line.
system central
controllers
Main control unit of the trunked dispatch system; handles ISW and
OSW messages to and from subscriber units (See ISW and OSW).
system select
The act of selecting the desired operating system with the system-select
switch (also, the name given to this switch).
talkaround
A conventional radio feature that lets you bypass the repeater and
connect directly to another radio. The transmit and receive frequencies
are the same.
thin small-outline
package
A type of dynamic random-access memory (DRAM) package that is
commonly used in memory applications.
October 14, 2003
6881094C31-C
Glossary-9
Term
Definition
time-out timer
A timer that limits the length of a transmission.
TOT
See time-out timer.
transceiver
Transmitter-receiver. A device that both transmits and receives analog
or digital signals. Also abbreviated as XCVR.
transmitter
Electronic equipment that generates and amplifies an RF carrier signal,
modulates the signal, and then radiates it into space.
TSOP
See thin small-outline package.
TX
Transmit.
UART
See also Universal Asynchronous Receiver Transmitter.
UHF
Ultra-High Frequency.
Universal
Asynchronous
Receiver Transmitter
A microchip with programming that controls a computer’s interface to its
attached serial devices.
Universal Serial Bus
An external bus standard that supports data transfer rates of 12 Mbps.
USB
See Universal Serial Bus.
VCO
See voltage-controlled oscillator.
vector sum excited
linear predictive
coding
A voice-encoding technique used in ASTRO digital voice.
VHF
Very-High Frequency.
VIP
Vehicle Interface Port.
VOCON
See vocoder/controller.
vocoder
An electronic device for synthesizing speech by implementing a
compression algorithm particular to voice. See also voice encoder.
vocoder/controller
A PC board that contains an ASTRO radio’s microcontroller, DSP,
memory, audio and power functions, and interface support circuitry.
voice encoder
The DSP-based system for digitally processing analog signals, and
includes the capabilities of performing voice compression algorithms or
voice encoding. See also vocoder.
voltage-controlled
oscillator
An oscillator in which the frequency of oscillation can be varied by
changing a control voltage.
VSELP
See vector sum excited linear predictive coding.
6881094C31-C
October 14, 2003
Glossary-10
Notes
October 14, 2003
6881094C31-C
Index
Index
Numerics
13 MHz reference generation, flipper IC 3-27
32 kHz oscillator, flipper IC 3-26
5-volt regulator U505, VOCON 3-23
700-800 MHz
model chart
non-ruggedized xxii
ruggedized xxiii
radio specifications xxvi
Abacus III IC U500 3-7
algorithms, encryption module 3-34
amplifier
audio power U503 3-24
audio pre-amplifier U502 3-24
driver U102 3-9
power transistor 3-10
summing U106 3-11
antenna port J2 3-5
antenna switch, transmitter 3-10
audio
circuitry, GCAP II IC U501 3-23
components, VOCON board 3-22
power amplifier U503 3-24
pre-amplifier U502 3-24
audio path
receive 3-33
transmit 3-32
automatic level control (ALC), PCIC 3-12
baseband interface port (BBP) 3-19
battery
connector J3 3-3
types and capacities 2-1
block diagram
Abacus III IC U500 3-7
overall 3-1
power distribution
700-800 MHz 2-2
UHF 2-2
VHF 2-2
receiver 3-5
transceiver 3-2, 3-3
board overlays
transceiver (RF) board
700-800 MHz 8-10
UHF 8-55
VHF 8-41
transceiver list 8-1
VOCON board
NTN9564B 8-86
NTN9564C 8-100
VOCON list 8-1
boot data path control, flipper IC 3-25
caution symbol meaning 1-2
charts, troubleshooting
button test 5-16
channel/zone select error 5-15
DC supply failure 5-5
display failure
800 MHz 5-11
VHF 5-8
keyload failure 5-34
list 5-1
main 5-2
power-up failure 5-3
secure hardware failure 5-35
top/side button test 5-17
VCO Tx/Rx unlock 5-18
VOCON
Rx audio 5-21
Rx RF 5-23
Tx audio 5-19
Tx RF (UHF R1/700-800 MHz) 5-31
Tx RF (VHF) 5-28
volume set error 5-14
CMOS support, flipper IC 3-26
components
block diagram 3-1
controller (VOCON) 3-17
encryption module 3-34
keypad module 3-30
universal flex assembly 3-30
connector
display module P301 3-17
encryption J701 3-17
keypad module P107 3-17
RF interface P201 3-17
universal J101 3-17
controller components, VOCON board 3-17
controls and control top flex, VOCON board 3-30
copyrights
computer software ii
document ii
D/A outputs, PCIC 3-13
danger symbol meaning 1-2
detailed theory
transceiver (RF) board 3-2
VOCON board 3-16
digital signal processor (DSP)
baseband interface port (BBP) 3-19
detailed theory 3-19
serial audio CODEC port (SAP) 3-20
timer module 3-19
universal serial bus (USB) 3-20
directional coupler U101, transmitter 3-10
disclaimer, documentation ii
display module
connector P301 3-17
VOCON board 3-29
driver amplifier U102 3-9
Index-2
EEPOT potentiometer U509 3-24
encryption
connector J701 3-17
module 3-34
module algorithms 3-34
errors, power-up self-check 4-5
ESD protection circuitry, VOCON board 3-27
external interface module (EIM) 3-18
Flash memory IC U402 3-21
flipper IC U301
13 MHz reference generation 3-27
32 kHz oscillator 3-26
boot data path control 3-25
CMOS support 3-26
detailed theory 3-25
logic level translation 3-25
one-wire support 3-26
side interface connector 3-25
SSI clock and frame sync generator 3-27
USB transceiver 3-25
watchdog timer 3-26
FracN IC U202 3-14
frequency generator unit (FGU)
FracN IC U202 3-14
loop filter 3-15
reference oscillator Y200 3-13
VCO buffer IC (VCOBIC) U200 3-15
GCAP II IC U501
audio circuitry 3-23
detailed theory 3-22
MCU interface 3-23
power routing 2-3
voltage regulation 3-22
global control audio and power II IC 501
See GCAP II IC U501
glossary Glossary-1
handling precautions, troubleshooting 4-1
harmonic filter, transmitter 3-10
IC
Abacus III U500 3-7
directional coupler U101 3-10
driver amplifier U102 3-9
Flash memory U402 3-21
flipper U301 3-25
FracN U202 3-14
GCAP II U501 3-22
Patriot U401 3-18
power-control (PCIC) U104 3-11
October 14, 2003
static RAM (SRAM) U403 3-20
summing amplifier U106 3-11
IF filter, receiver front end 3-6
interconnections
transceiver 3-3
VOCON board 3-16
interface support components, VOCON board 3-24
keep-alive mode 2-2
key variable loader (KVL) 3-34
keypad module
connector P107 3-17
description 3-30
VOCON board 3-30
KVL (key variable loader) 3-34
LNA, receiver front end 3-6
logic level translation, flipper IC 3-25
loop filter, FGU 3-15
manual
notations 1-2
revisions ii
MCU interface, GCAP II IC U501 3-23
memory components, VOCON board 3-17
microcontroller unit (MCU)
description 3-18
external interface module (EIM) 3-18
multiple queue serial peripheral interface
(MQSPI) 3-19
one-way interface 3-19
universal asynchronous receiver/transmitter
(UART) 3-19
mixer, receiver front end 3-6
mode, keep-alive 2-2
model chart
700-800 MHz
non-ruggedized xxii
ruggedized xxiii
numbering system xvii
UHF Range 1
non-ruggedized xx
ruggedized xxi
VHF
non-ruggedized xviii
ruggedized xix
model numbering system, radio xvii
module
encryption 3-34
keypad 3-30
multiple queue serial peripheral interface (MQSPI) 3-19
notations in manual 1-2
6881094C31-C
Index-3
one-way interface 3-19
one-wire support, flipper IC 3-26
option selects, universal connector 3-29
ordering replacement parts A-1
oscillator
32 kHz 3-26
reference Y200, FGU 3-13
sampling clock 3-8
second local 3-8
voltage-controlled (VCO) 3-8
overview
keypad module 3-30
universal flex assembly 3-30
VOCON board 3-16
parts list
transceiver (RF) board
700-800 MHz 8-12, 8-26
UHF 8-57, 8-73
VHF 8-43
VOCON board
NNTN4563A/B 8-116
NNTN4717D 8-145
NNTN4819A 8-131
NTN9564B 8-88
NTN9564C 8-102
parts, ordering replacement A-1
Patriot IC U401
description 3-18
digital signal processor (DSP) 3-19
microcontroller unit (MCU) 3-18
PCIC (power-control IC) U104
automatic level control (ALC) 3-12
D/A outputs 3-13
detailed theory 3-11
purpose 3-8
temperature cut back 3-13
voltage multiplier 3-12
voltage regulator 3-12
power
amplifier transistor 3-10
components, VOCON board 3-22
conditioning components, transceiver 3-5
power control IC U104 See PCIC (power control IC)
U104
power distribution
block diagram
700-800 MHz 2-2
UHF 2-2
VHF 2-2
keep-alive mode 2-2
radio 2-1
transceiver board 2-3
transmitter 3-9
VOCON board 2-3
power-up self-check
diagnostics and repair 4-6
errors 4-5
power-up/power-down sequence 3-33
6881094C31-C
preselector filters, receiver front end 3-6
product safety information ii
publications, related xii
radio
keep-alive mode 2-2
model numbering system xvii
power distribution 2-1
power-up/power-down sequence 3-33
receive audio path, VOCON board 3-33
receiver
back end
Abacus III IC U500 3-7
detailed theory 3-7
sampling clock oscillator 3-8
second LO 3-8
block diagram 3-5
front end
detailed theory 3-6
IF filter 3-6
low-noise amplifier (LNA) 3-6
mixer 3-6
preselector filters 3-6
reference oscillator Y200, FGU 3-13
related publications xii
replacement parts, ordering A-1
RF
detectors, transmitter 3-11
exposure compliance information ii
interface connector P201 3-17
sampling clock oscillator 3-8
schematics
transceiver (RF) board 8-3
transceiver board list 8-1
VOCON board 8-79
VOCON board list 8-1
second LO (local oscillator) 3-8
serial audio CODEC port (SAP) 3-20
serial EEPROM 3-5
service tools, recommended 4-2
side interface connector, flipper IC 3-25
signal tracing, troubleshooting 4-3
specifications
700-800 MHz radios xxvi
UHF Range 1 radios xxv
VHF radios xxiv
SSI clock and frame sync generator, flipper IC 3-27
standard supply voltages 4-4
static RAM (SRAM) IC U403 3-20
summing amplifier U106, transmitter 3-11
symbols
caution 1-2
danger 1-2
warning 1-2
system clocks
troubleshooting 4-4
VOCON board 3-31
October 14, 2003
Index-4
temperature cut back, PCIC 3-13
terms and definitions Glossary-1
timer module, DSP 3-19
tools, recommended service 4-2
trademark information ii
transceiver
antenna port J2 3-5
battery connector J3 3-3
block diagram 3-2, 3-3
board overlays
700-800 MHz 8-10
UHF 8-55
VHF 8-41
detailed theory 3-2
interconnections 3-3
parts list
700-800 MHz 8-12, 8-26
UHF 8-57, 8-73
VHF 8-43
power conditioning 3-5
power distribution diagram 2-3
schematics 8-3
serial EEPROM 3-5
VOCON connector P1 3-3
voltage regulators 2-3
transmit audio path, VOCON board 3-32
transmitter
antenna switch 3-10
directional coupler U101 3-10
driver amplifier U102 3-9
harmonic filter 3-10
introduction 3-8
PCIC (power-control IC) U104 3-11
power amplifier transistor 3-10
power distribution 3-9
power-control IC (PCIC) 3-8
RF detectors 3-11
summing amplifier U106 3-11
troubleshooting
button test 5-16
channel/zone select error 5-15
charts listing 5-1
DC supply failure 5-5
display failure
800 MHz 5-11
VHF 5-8
handling precautions 4-1
keyload failure 5-34
main chart 5-2
power-up failure 5-3
power-up self-check
diagnostics and repair 4-6
errors 4-5
secure hardware failure 5-35
service tools 4-2
signal tracing 4-3
standard supply voltages 4-4
system clocks 4-4
top/side button test 5-17
VCO Tx/Rx unlock 5-18
VOCON
Rx audio 5-21
Rx RF 5-23
October 14, 2003
Tx audio 5-19
Tx RF (UHF R1/700-800 MHZ) 5-31
Tx RF (VHF) 5-28
voltage measurement 4-3
volume set error 5-14
troubleshooting waveforms
13 MHz clock 6-2
16.8 MHz buffer input and output 6-3
32.768 kHz clock outputs 6-4
list 6-1
receive baseband interface port (BBP) 6-7
RX serial audio port (SAP) 6-6
SPI B data 6-5
transmit baseband interface port (BBP) 6-8
UHF Range 1
model chart
non-ruggedized xx
ruggedized xxi
radio specifications xxv
universal asynchronous receiver/transmitter
(UART) 3-19
universal connector
interface circuitry, VOCON board 3-28
J101 3-17
location 3-28
option selects 3-29
universal flex assembly 3-30
universal serial bus (USB) 3-20
USB transceiver, flipper IC 3-25
VCO (voltage-controlled oscillator) 3-8
VCO buffer IC (VCOBIC) U200, FGU 3-15
VHF
model chart
non-ruggedized xviii
ruggedized xix
radio specifications xxiv
VOCON board
5-volt regulator U505 3-23
audio
components 3-22
power amplifier U503 3-24
pre-amplifier U502 3-24
board overlays
NTN9564B 8-86
NTN9564C 8-100
connector J101 pin-outs 3-28
controller components 3-17
controls and control top flex 3-30
display
module 3-29
module connector P301 3-17
EEPOT potentiometer U509 3-24
encryption connector J701 3-17
ESD protection circuitry 3-27
Flash memory IC U402 3-21
flipper IC U301 3-25
GCAP II IC U501 3-22
6881094C31-C
Index-5
interconnections 3-16
interface support components 3-24
keypad
module 3-30
module connector P107 3-17
memory components 3-17
overview 3-16
parts list
NNTN4563A/B 8-116
NNTN4717D 8-145
NNTN4819A 8-131
NTN9564B 8-88
NTN9564C 8-102
Patriot IC U401 3-18
power components 3-22
power distribution 2-3
receive audio path 3-33
RF interface connector P201 3-17
schematics 8-79
static RAM (SRAM) IC U403 3-20
system clocks 3-31
transmit audio path 3-32
universal connector interface circuitry 3-28
universal connector J101 3-17
VOCON connector P1 3-3
6881094C31-C
voltage
measurement, troubleshooting 4-3
multiplier, PCIC 3-12
regulation, GCAP II IC U501 3-22
regulator, PCIC 3-12
regulators, transceiver 2-3
voltage-controlled oscillator (VCO) 3-8
voltages, standard supply 4-4
warning symbol meaning 1-2
warranty information xiii
watchdog timer, flipper IC 3-26
waveforms, troubleshooting
13 MHz clock 6-2
16.8 MHz buffer input and output 6-3
32.768 kHz clock outputs 6-4
list 6-1
receive baseband interface port (BBP) 6-7
RX serial audio port (SAP) 6-6
SPI B data 6-5
transmit baseband interface port (BBP) 6-8
October 14, 2003
Index-6
October 14, 2003
6881094C31-C
Motorola, Inc.
8000 West Sunrise Boulevard
Ft. Lauderdale, FL 33322
MOTOROLA, the Stylized M Logo, ASTRO, FLASHport, and CommPort
are registered in the U.S. Patent and Trademark Office. All other product
or service names are the property of their respective owners.
© Motorola, Inc. 2003
All rights reserved. Printed in U.S.A.
*6881094C31*
6881094C31-C

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 129
Page Mode                       : UseOutlines
Has XFA                         : No
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:e9fee0af-8fab-4d54-b7dc-ee683fccd4ab
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Create Date                     : 2003:10:14 10:47:50Z
Modify Date                     : 2004:02:11 17:16:40-05:00
Metadata Date                   : 2004:02:11 17:16:40-05:00
Creator Tool                    : FrameMaker 6.0
Document ID                     : uuid:04894d82-7cba-459e-b63e-4cd5ed6171ca
Format                          : application/pdf
Creator                         : Motorola, Inc.
Description                     : English
Title                           : ASTRO XTS 5000 VHF/UHF R1/700-800 MHz Digital Portable Radio Detailed Service Manual
Author                          : Motorola, Inc.
Keywords                        : 6881094C31, 94C31-B, ASTRO, XTS 5000, VHF, UHF R1, 700-800 MHz, Digital Portable Radio, Detailed Service Manual
Subject                         : English

EXIF Metadata provided by EXIF.tools