Techsan I and C PT4200U PDP Monitor User Manual Helios NTSC Luce pdf

Download:
Mirror Download [FCC.gov]
Document ID	388813
Application ID	kTfp2fV0ykfQccMr/FOEzQ==
Document Description	User Manual 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	255.05kB (3188183 bits)
Date Submitted	2004-01-14 00:00:00
Date Available	2004-01-13 00:00:00
Creation Date	2003-07-03 15:26:07
Producing Software	Acrobat Distiller 4.0 for Macintosh
Document Lastmod	2003-12-30 16:20:00
Document Title	*Helios NTSC(Luce)pdf
Document Creator	QuarkXPress3.3k: LaserWriter 8 KH-8.7.1
Document Author:	005

REPORT NO : HCT-F03-1203
FCC ID : RJ5PT4200U
DATE :DECEMBER 22,2003
ATTACHMENT D.
- USER’S GUIDE
HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD.
SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA
TEL : +82 31 639 8518
FAX : +82 31 639 8525 www.hctec.co.kr
Table of Contents
Important Safety Information .......................................................................................................................... 2
Overview Of Your New PDP ............................................................................................................................ 7
Control Button .............................................................................................................................................. 7
Control Button Key Function ....................................................................................................................... 7
Connecting To External Equipment ........................................................................................................... 8
RS-232C Configurations ............................................................................................................................. 9
Accessories ....................................................................................................................................................... 11
Features Of The Remote Control.................................................................................................................... 12
Loading The Batteries ................................................................................................................................. 13
Reception Range Of Remote Control ........................................................................................................ 13
Monitor Installation ........................................................................................................................................... 14
Wall Mount (optional) Installation................................................................................................................ 14
Table Stand (optional) Installation .............................................................................................................. 15
Speaker Installation ..................................................................................................................................... 17
Optional Extras .................................................................................................................................................. 21
Watching TV ....................................................................................................................................................... 22
To watch TV (When the Interface board is installed) ................................................................................ 22
Watching VCR.................................................................................................................................................... 23
To watch VCR (When the Interface board is installed) ............................................................................. 23
Watching DVD(Interlace).................................................................................................................................. 24
How to connect (When the Interface board is installed)............................................................................ 24
How to use (When the Interface board is installed) ................................................................................... 24
Watching DVD(Progressive) ........................................................................................................................... 25
Connecting The PC ........................................................................................................................................... 26
OSD Structure.................................................................................................................................................... 27
.......................................................................................................................................... 28
Picture
PIP
........................................................................................................................................................ 29
SOUND ............................................................................................................................................................... 31
SETUP ........................................................................................................................................................... 34
CHANNEL........................................................................................................................................................... 35
FUNCTION ........................................................................................................................................................ 38
TIME
............................................................................................................................................................... 40
Compatible Display Monitor Specification ................................................................................................... 44
Hot Key Function By Remote Control ........................................................................................................... 42
Specification ...................................................................................................................................................... 45
Troubleshooting ................................................................................................................................................ 47
United States Retail Warranty Card ............................................................................................................... 48
OWNER'S MANUAL
Important Safety Information
WA R NING
WA R NING : To reduc e the ris k of elec tric s hoc k do not remove c over or bac k. No
us er-s ervic eable parts ins ide. R efer s ervic ing to qualified s ervic e pers onnel.
T he lightning fla s h with
arrow-head within a triangle
is intended to tell the us er
that parts ins ide the product
are a risk of electric shock to
pers ons .
T he exclamation point within
a triangle is intended to tell
the us e r tha t importa nt
ope ra ting a nd s e rvic ing
instructions are in the papers
with the appliance.
WAR NING
This is a C lass B product. In a domestic environment this product may cause radio interference in which case
the user may be required to take adequate measures.
F C C NOT IC E
This device has been tested and found to comply with the limits for a C lass B device, pursuant to Part 15 of the FC C R ules.
These limits are designed to provide reasonable protection against harmful interference in a commercial, industrial or
business environment. This equipment can generate, use and radiate radio frequency energy and, if not installed and used
in accordance with the instruction, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures :
- R eorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- C onnect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- C onsult the dealer or an experienced radio/TV technician for help.
C hanges or modification not expressly approved by the party responsible for compliance could void the user's authority to
operate the equipment.
C onnecting of peripherals requires the use of ground shielded signal cables.
Always be careful when using your Monitor. To reduce the risk of fire, electrical shock,
and other injuries, keep these safety precautions in mind when installing, using, and
maintaining your machine.
Warning and
Instruction
Read all safety and operating
instructions before operating your
Monitor.
Keep the safety and operating
instructions for future reference.
Read all warnings on the Monitor and
in the operating instructions.
OWNER'S MANUAL
Important Safety Information
1. R ead these ins truc tions
All the safety and operating instructions shall be read before the appliance is operated.
2. Retain instructions
The safety and operating instructions shall be retained for future reference.
3. Heed all warnings
All warnings on the appliance and in the operating instructions shall be adhered to.
4. Keep these ins truc tions
All operating and use instructions shall be followed.
5. Follow all ins truc tions
6. Do not use this apparatus near warter
7. Clean only with a dry cloth
8. Do not block any of the ventilation openings. Install in accordance with the manufacturer's instructions
9. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
( including amplifiers) that produce heat.
10. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two
blades and a third grounding prong. The wide blade or the third prong is provided for your safety.
When the provided plug does not fit into your outlet, consult an electrician for replacement of
the obsolete outlet.
11. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles and the point where they exit from the apparatus.
12. Only use the attachments/accessories specified by the manufacturer.
13. Use only with a cart, stand, tripod, bracket, or sold with the apparatus.
When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury form tip-over
14. Unplug this apparatus during lightning storms or whe unused for long
periods of time
15. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus, the apparatus has veen exposed to rain or
moisture , does not operate normally, or has been dropped
CAUTION - This stand intended for use only with idisplay.tv , iP#-42S$@, PDP TV monitor. Use with
other appratus is capable of resulting in instability causing possible injury
CAUTION - These servicing instructions are for use by qualified service personnel only. To reduce the
risk of electric shock, do not perform any servicing other than that contained in the
operating instructions unless you qualified to do so
CAUTION - Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids,
such as vases, shall be placed on the appratus
OWNER'S MANUAL
Important Safety Information
Provide ventilation for the Monitor. The unit is designed
with slots in the cabinet for ventilation to protect it from
overheating. Do not block these openings with any object,
and do not place the Monitor on a bed, sofa, rug, or other
similar surface. Do not place it near a radiator or heat
register. If you place the Monitor on a rack or bookcase,
ensure that there is adequate ventilation and that you've
followed the manufacturer's instructions for mounting.
Use only the accessory cord designed for this product to
prevent shock. The power supply voltage rating of this
product is AC100-240V and the power cord attached conforms
to the above power supply voltage. Use only the power
cord designated by our dealer to ensure Safety and EMC.
When it is used by other power supply voltage, the power cable
must be changed. Consult your product dealer.
Use only a grounded or polarized outlet. For your safety, this
Monitor is equipped with a polarized alternating current line
plug having one blade wider than the other. This plug will fit
into the power outlet only one way. If you are unable to insert
the plug fully into the outlet, try reversing the plug. If the plug
still does not fit, contact your electrician to replace your outlet.
Avoid overhead power lines. An outside antenna system
should not be placed in the vicinity of overhead power lines
or other electric light or power circuits or where it can fall into
such power lines or circuits. When installing an outside
antenna system, be extremely careful to keep from touching
the power lines or circuits. Contact with such lines can be fatal.
Unplug the Monitor from the wall outlet and disconnect the
antenna or cable system during a lightening storm or when left
unattended and unused for long periods of time. This will
prevent damage to the unit due to lightening and power-line
surges.
Protect the power cord. Power supply cords should be
routed so that they won't be walked on or pinched by
objects placed on or against them. Pay particular attention
to cords at plugs, convenience receptacles, and the point
where they exit from the unit.
OWNER'S MANUAL
Important Safety Information
Do not overload the wall outlet or
extension cords. Overloading can
result in fire or electric shock.
Do not insert anything through the
openings in the unit, where they can
touch dangerous voltage points or
damage parts. Never spill liquid of
any kind on the Monitor.
Bend antenna cable between inside
and outside building to prevent rain
from flowing in.
- This may cause water damaged
inside the Monitor and could give an
electric shock.
Ground outdoor antennas. If an outside antenna or cable system is connected to the Monitor, be sure the
antenna or cable system is grounded so as to provide some protection against voltage surges and built-up
static charges. Section 810 of the National Electrical Code, ANSI/NFPA No.70-1984, provides information
about proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode.
Do not place an outside antenna in
the vicinity of overhead power lines or
other electric light or power circuits.
- This may cause and electric shock.
There should be an enough distance
between an outside antenna and
power lines to keep the former from
touching the latter even when the
antenna falls.
- This may cause an electric shock.
Do not attempt to service the Monitor yourself. Refer all servicing to qualified service
personnel. Unplug the unit from the wall outlet and refer servicing to qualified service
personnel under the following conditions:
• when the power-supply cord or plug is damaged
• if liquid has been spilt on the unit or if objects have fallen into the unit
• if the Monitor has been exposed to rain or water
• if the Monitor does not operate normally by following the operating instructions
• if the Monitor has been dropped or the cabinet has been damaged
• when the Monitor exhibits a distinct change in performance
OWNER'S MANUAL
Important Safety Information
When replacement parts are
required, be sure the service
technician use replacement parts
specified by the manufacturer or
those that have the same
characteristics as the original part.
Unauthorized substitutions may result
in additional damage to the unit.
Upon completion of any service or
repairs to this Monitor, ask the
service technician to perform safety
checks to determine that the Monitor
is in a safe operating condition.
If you make adjustments yourself,
adjust only those controls that are
covered by the operating instructions.
Adjusting other controls may result in
damage and will often require
extensive work by a qualified
technician to restore the Monitor to
normal.
Use only the specified batteries.
Do not place anything containing
liquid on top of the Monitor.
In case of smoke or strange smell
from the Monitor, switch it off, unplug
it from the wall outlet and contact
your dealer or service center.
- This may cause damage to the
Monitor or could give an electric
shock.
- This may cause a fire or could give an
electric shock.
The recommended viewing distant is
5~7 times farther out than the diagonal
length of the screen.
When moving the Monitor assembled
with speakers, do not carry holding
the speakers.
- If not, eyes may strain.
- This may cause the Monitor to fall,
causing serious injury to a child or
adult, and serious damage to the
Monitor.
OWNER'S MANUAL
- This may cause a fire or could give an
electric shock.
Avoid having a fixed image remain
on the screen for a long period of
time. Typically a frozen still picture
from a VCR, 4:3 picture format or if
a CH label is present; the fixed
image may remain visible on the
screen.
Overview Of Your New PDP
OSD Button

MENU
VOL
CH
OS D B utton & F unc tion
1 Input S ignal S ource S elect
2 MENU Select
3 Audio Volume Down/Up
4 CHANNEL Down/Up
5 Remoncon Sensor or Power (S tand By)
OSD Key Function
SELECT
S elect the signal source from multiple input source such as TV, VIDEO , S -Video, DTV, DVD , DVI
PC and DTV YPbPr.
MENU
OSD Menu Control.
V OL - / V OL +
C hange the audio level in normal display mode and move the scroll bar in Volume control menu.
CH- / CH +
C hange the TV Channel control menu.
P OWE R
Turn on and off the main power.
OWNER'S MANUAL
Overview Of Your New PDP
Connecting To External Equipment
AUDIO
COMPONENT(480i/480p/720p/1080i)
SERVICE
RS-232C
AUDIO
COMPOSITE
JACK
DVI-D(Option)
CVBS
S-VIDEO
RGB(PC)
AUDIO
AUDIO OUT
OUT
DTV
IN
DVD
CVBS
AUDIO
PIP
EAR P.
EXT. SPEAKER
ANT
VHF / UHF
SPEAKER
SWITCH
EXT
COMPONENT(480i/480p/720p/1080i)
AUDIO
DTV
SERVICE
RS-232C
INT
JACK
DVI-D(Option)
RGB(PC)
DVD
R S -232C INP UT C ONT R OL T E R MINA L
Control the monitor's functions externally by external equipment. Connects to the computer RS-232C output
terminal.
DV I INP UT (Optional)
Connect DVI Computer Source (Digital Signal) here. Contact your dealer for buying optional item.
D-s ub 15pin (P C )
Connect PC Computer Source ( here. Contact your dealer for buying optional item.
AUDIO INPUT TERMINAL
Connect to the audio output terminal of a DVI, PC or similar source of device.
OWNER'S MANUAL
POWER
Overview Of Your New PDP
Component Input(DVD Y,Pb,Pr) 480i
Connects to a component output terminal of a DVD player.
Component Input(DTV Y, Pb, Pr) 480p, 720p, 1080i
Connects to a component out put terminal of a Progressive DVD player or HD Set-Top Box.
COMPOSITE
AUDIO
AUDIO OUT
EXT. SPEAKER
OUT
CVBS
S-VIDEO
PIP
EAR P.
IN
CVBS
ANT
VHF / UHF
POWER
SPEAKER
SWITCH
EXT
INT
S-Video Input Terminal
Connects to a S-Video output terminal of a S-VHS VCRs or DVD players.
Composite Input/Output Terminal(VIDEO INPUT, MONITOR OUT)
Connects to a composite output terminal of VCRs or DVD players or Monitor out.
Audio out / PIP Earphone
Fixed Level Audio signal output to external audio amplifier(optional) or Headphones(Optional).
T V A ntenna Terminal
Connects to an antenna cable.
A C(POWER) Input T e r m i n a l
Firmly insert the accessory power cord as far as it will go into the power input terminal.
Firmly push the power cord plug as far as it will go into the power socket.
S l i d e Switc h
Audio out controller to internal or external.
C onnectors
AUDIO INPUT
R C A Pin Jack
VIDE O INPUT
R C A Pin Jack
S -VIDE O INPUT
Pin Did
C OMPONE NT VIDE O INPUT
R C A Pin Jack
R GB INPUT
15-pin D-sub
R S -232C
9-pin D-sub
RS-232C Configurations
• Cables connecting PC's may vary depending on the
PC types.
OWNER'S MANUAL
10
OWNER'S MANUAL
RS-232C
SERVICE
JACK
DVI-D(Option)
RGB(PC)
AUDIO
DVD
DTV
COMPONENT(480i/480p/720p/1080i)
AUDIO
S-VIDEO
IN
OUT
CVBS
CVBS
COMPOSITE
AUDIO
PIP
EAR P.
AUDIO OUT
EXT. SPEAKER
out
EXT
INT
SPEAKER
SWITCH
ANT
VHF / UHF
POWER
Overview Of Your New PDP
Accessories
Table Stand
(Separated Type)
Remote Control Handset
Shielded
Alkaline Batteries (AAA)
4*30 : 2EA
Screw
Power C ord
Owner's Manual
4*16 : 2EA
F Type Connector
OWNER'S MANUAL
11
Features Of The Remote Control
When us ing the remote control, always point it directly at the IR s ens or of Plas ma monitor.
P R E CH
Jump back to previous TV channel
ME NU / S E T
Activate the OSD window, enter the sub-menu
STILL
Activate the temporary image freeze feature
C H+ / C HChange channel on TV mode, up or down
V OL + / V OL Change the audio level, increase or decrease
MT S
Multi Channel Television Stereo. Select audio out mode to
stereo or mono
INF O
See information for selectecd channel
P IC T UR E
Choose three different modes of picture settings
PC AUTO
Automatically adjust picture position and eliminate any image shaking
S OUND
Choose the best appropriate audio environment
SLEEP
Set TV timer for 30 min, 60 min, 90 min, 120 min, 180 min and 240 min
MUT E
Mute on / off
P OWE R
Turn the main power on and to stand by
T V / V IDE O
Select the signal source from multiple input
source of TV, Video, S-video, DVD , DTV, PC
DVI(Optional)
ASPECT
Change the image settings, ie; WIDE etc.
P IP (Picture-in-picture)
Activate PIP function on PC for DTV Mode
Number key
Input channel number
12
OWNER'S MANUAL
CAPTION
Control the caption decoder On/Off
SOURCE
Change the video input source of the sub-picture when PIP is turned on
SIZE
Change the sub-picture size large/small/double
SWAP
Swaps the picture and the sub-picture
C H SCAN
The sub-picture TV channel scan
CH UP/DOWN
The sub-picture channel up/down
LOCATION
Move the sub-picture the screen
Features Of The Remote Control
Loading The Batteries
Press on the cover and slide
in the direction of the arrow.
Load two AAA batteries, taking
care that the + and - ends face
to the correct direction.
Close the cover until it clicks.
Reception range of Remote Control
OWNER'S MANUAL
13
Monitor Installation
The Monitor can be installed in Wall Mount, Table Stand and Ceiling Mount
Wall Mount (optional) Installation

• Install the monitor only in a location where adequate ventilation is available.
14
OWNER'S MANUAL
Monitor Installation
Table Stand (optional) Installatidfdfdfon
United type Table Stand (optional)

• Table Stand requires minimum allowable clearances for adequate ventilation.
OWNER'S MANUAL
15
Monitor Installation
Ins tallation
16
OWNER'S MANUAL
Monitor Installation
Speaker Installation
42" External S peaker (Optional) Ins tallation
• Match the color of each connection on the speaker and monitor
• Turn off monitor power before making any connections .
Place the speakers in the position you want. Install the speaker wires on the monitor and speaker. Be sure to connect the
positive Ò+Ówire to the Ò+Óinput and the negative Ò-Ówire to the ÒÐÓinput. C onnect left monitor input to left speaker and right
monitor input to right speaker. Any extra speaker wire length remaining can be bunched into the wire holders provided.
(C aution: Once installed, the speaker wire holders lock into position and canÕtbe removed.)
OWNER'S MANUAL
17
Monitor Installation
External Speaker Accessories
4-Metal Plates (Mount speakers to monitor)
8-4 x 8 Short Screws (Attach metal plates to monitor)
18
OWNER'S MANUAL
8-4 x 16 Long Screws (Attach metal plates to speakers)
2-Speaker Wires
Monitor Installation
50" Speaker (Optional) Installation
• Match the color of each connection on the speaker and monitor.
• Always lift the monitor itself (not the speakers) when handling or moving the monitor after speakers have been installed.
Assemble the monitor to speaker using the supporter hanger and bolt. As shown above A, assemble the a and b of
supporter hanger to the monitor using the bolt(M4x8). Assemble the c, d and e to the speaker using the
bolt(4x16). If the bolts are tightened too much, the product could be damaged.
OWNER'S MANUAL
19

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 20
Has XFA                         : No
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:b71e3899-f499-49d8-b45d-cd150d3098ff
Producer                        : Acrobat Distiller 4.0 for Macintosh
Create Date                     : 2003:07:03 15:26:07Z
Modify Date                     : 2003:12:30 16:20:00+09:00
Metadata Date                   : 2003:12:30 16:20:00+09:00
Creator Tool                    : QuarkXPress3.3k: LaserWriter 8 KH-8.7.1
Document ID                     : uuid:135a2346-d46e-4d2e-ae41-711e52c0d529
Format                          : application/pdf
Creator                         : 005
Title                           : *Helios NTSC(Luce)pdf
Author                          : 005

EXIF Metadata provided by EXIF.tools