Tecom Co 402421 Multiple handset cordless phone User Manual 4

Tecom Co Ltd Multiple handset cordless phone 4

manual with warning statements

Download: Tecom Co 402421 Multiple handset cordless phone User Manual 4
Mirror Download [FCC.gov]Tecom Co 402421 Multiple handset cordless phone User Manual 4
Document ID147071
Application IDAkaIBwUy0gEsyHx1iM8Bbg==
Document Descriptionmanual with warning statements
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize21.25kB (265656 bits)
Date Submitted2001-04-27 00:00:00
Date Available2002-03-19 00:00:00
Creation Date2001-05-13 14:24:55
Producing SoftwareAcrobat PDFWriter 4.05 for Windows
Document Lastmod2001-04-27 15:33:36
Document Title4_.PDF
Document CreatorMicrosoft Word
Document Author: csr

VTECH TELECOMMUNICATIONS LTD.
File :VT40-2421
MMI REV 4.doc
Date : 15 Nov, 2000
TITLE : INTERNAL PRODUCT SPECIFICATION
Feature Operation
(VT 40-2421)
2.4GHz 4-Line Cordless Telephone
with speakerphone, Type II Caller ID
on Handset
DOCUMENT NO.
VT40-2421 MMI
REV NO.
PAGE
1 of 43
VTECH TELECOMMUNICATIONS LTD.
File :VT40-2421
MMI REV 4.doc
Date : 15 Nov, 2000
TITLE : INTERNAL PRODUCT SPECIFICATION
TABLE OF CONTENTS
1.
REVISION RECORD.................................................................................................................................................3
2.
INTRODUCTION .......................................................................................................................................................4
3.
FEATURES OVERVIEW.........................................................................................................................................5
4.
HANDSET KEYPAD LAYOUT .............................................................................................................................7
5.
FUNCTIONAL DESCRIPTION OF HANDSET AND BASE........................................................................8
5.1.
5.2.
5.3.
5.4.
HANDSET .........................................................................................................................................................8
BASE .................................................................................................................................................................10
CHARGER ......................................................................................................................................................11
LCD ON THE HANDSET ................................................................................................................................11
6.
OPERATIONS............................................................................................................................................................13
7.
FCC WARNING STATEMENT ...........................................................................................................................43
7.1.
7.2.
FCC WARNING STATEMENT .....................................................................................................................43
RF EXPOSURE W ARNING STATEMENT ..................................................................................................43
DOCUMENT NO.
VT40-2421 MMI
REV NO.
PAGE
2 of 43
VTECH TELECOMMUNICATIONS LTD.
File :VT40-2421
MMI REV 4.doc
1.
Date : 15 Nov, 2000
TITLE : INTERNAL PRODUCT SPECIFICATION
REVISION RECORD
Revision
Date
24-Jun-2000
Initial release
19-July 2000
REVISION
7-Aug-2000
REVISION
8-Aug-2000
REVISION
15-Nov-2000
REVISION
DOCUMENT NO.
VT40-2421 MMI
Summary of changes
REV NO.
PAGE
3 of 43
VTECH TELECOMMUNICATIONS LTD.
File :VT40-2421
MMI REV 4.doc
2.
Date : 15 Nov, 2000
TITLE : INTERNAL PRODUCT SPECIFICATION
INTRODUCTION
VT 40-2421 system consists of one base unit and up to 12 wireless handset units. The
base unit provides 4 voice (RF) channels for intercom or outside calling by any
wireless handset.
Since the transmitter has the value of 5dBm, the EUT passed the applicable
requirements.
DOCUMENT NO.
VT40-2421 MMI
REV NO.
PAGE
4 of 43
VTECH TELECOMMUNICATIONS LTD.
File :VT40-2421
MMI REV 4.doc
3.
Date : 15 Nov, 2000
TITLE : INTERNAL PRODUCT SPECIFICATION
FEATURES OVERVIEW
•
•
CO LINES/PBX : 4 CO LINES ,12 STATIONS
LCD with 2 x 16 ALPHA-NUMERIC & 2 ROWS ICONS
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
TONE/PULSE DIALING SELECTABLE
SPEED DIAL : 20 (EACH 30 DGT AND 16 CHAR NAME MAX)
MEMORY: 01 - 20
CID MEMORY: 50
HANDSET SPEAKERPHONE
PAGE
ROOM MONITOR
CALL TIMER
TYPE I & II CALLER ID
VISUAL MESSAGE WAITING
INTERCOM
LAST NUMBER REDIAL
CALL HOLD FOR EXTERNAL CALL
3-WAY CONFERENCE
CALL TRANSFER OF EXTERNAL CALL
TRANSFER RECALL
HOLD REMINDER
DO-NOT-DISTURB(DND)
FLASH
PAUSE (2 SECONDS)
MUTE/UNMUTE TOGGLE CONTROL
HEADSET COMPATIBILITY
RINGER TONES SELECTION AND VOL ADJUSTABLE
HANDSET/HEADSET/SPEAKERPHONE VOL ADJUSTABLE
CO LINE RINGING ENABLE/DISABLE
PROGRAMMABLE FLASH (0.6 SECONDS DEFAULT)
RANGE 0.1SEC -----0.9 SEC
STORE REDIAL INTO SPEED DIAL MEMORY
ERASE SPEED DIAL MEMORY
PROGRAM SYSTEM SECURITY CODE
PROGRAM CID AREA CODES
HOME AREA CODES : 1
LOCAL AREA CODES : 5
MASTER RESET
HOLD TONE REMINDER TIME (30 SECONDS DEFAULT)
15 SECONDS -------60 SECONDS
WITH OFF SETTING
LINE IN USE DETECT ENABLE/DISABLE
RINGING INDICATORS
•
•
•
•
•
•
•
•
•
•
DOCUMENT NO.
VT40-2421 MMI
REV NO.
PAGE
5 of 43
VTECH TELECOMMUNICATIONS LTD.
File :VT40-2421
MMI REV 4.doc
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Date : 15 Nov, 2000
TITLE : INTERNAL PRODUCT SPECIFICATION
CONFERENCE TWO OUTSIDE LINES
CONFERENCE ONE OUTSIDE AND TWO HANDSET
HANDSET IDENTIFICATION (01 --12)
BATTERY LOW INDICATION
OUT OF RANGE INDICTION AND WARNING TONE
REVIEWING A CALL
AUTO-DIAL FROM CALLER ID LOG
STORE CID INTO SPEED DIAL
ERASE CID CALL
ERASE ALL CALLS
DISPLAY TOTAL CALLS /TOTAL NEW CALLS
ANY KEY ANSWER
DIGITAL KEYS AND LINE KEYS
DIRECTLY ANSWER ANY RINGING LINE BY PRESSING THE
ASSOCIATED LINE BUTTON
AUX DATA PORT (Connected to Line 2)
KEYPAD BACKLIGHT
LCD BACKLIGHT
US STANDARD WALL MOUNT BRACKET
AUTO RELEASE WHEN THE HANDSET IS RETRUNTED TO CRADLE
DOCUMENT NO.
VT40-2421 MMI
REV NO.
PAGE
6 of 43
VTECH TELECOMMUNICATIONS LTD.
File :VT40-2421
MMI REV 4.doc
4.
Date : 15 Nov, 2000
TITLE : INTERNAL PRODUCT SPECIFICATION
HANDSET KEYPAD LAYOUT
FLASH
CID LIST
END
LINE 1
LINE 2
LINE 3
LINE 4
REDIAL
HOLD
MUTE
SPEAKERPHONE
2ABC
3DEF
5JKL
6MNO
8TUV
9WXYZ
0 OPER
DEL
4GHI
DND
7PQRS
PAUSE
Æ TONE
TONE
CONF
FUNCTION
DOCUMENT NO.
(Confirm)
MEM
VT40-2421 MMI
INTERCOM
REV NO.
CALLER
PAGE
7 of 43
VTECH TELECOMMUNICATIONS LTD.
File :VT40-2421
MMI REV 4.doc
5.
Date : 15 Nov, 2000
TITLE : INTERNAL PRODUCT SPECIFICATION
FUNCTIONAL DESCRIPTION OF HANDSET AND BASE
5.1.
HANDSET
5.1.1.
DIALING KEYS “0~9”, “*” & “#”
Press the dial digits 0~9, “*” or “#’ on the dialing keypad. The corresponding DTMF
tone (or pulse sequence) will be dialed out immediately. The dial digits will be
buffered up to 30 digits maximum. If the digit you entered faster than the phone
dialing, all the digits will dialed out in sequentially.
The ‘#’ key will be ignored if in pulse dialing mode.
In pulse dialing mode. The “*” key is temporarily used for enable tone dialing mode.
5.1.2.
LINE KEYS
Pressed the [Lx] key, where x=1,2,3,4 you can hear a dial tone on the Earpiece for
placing an outside call or retrieving a line on hold.
5.1.3.
END KEY
You can press the [END] key to ending a call and to quit all modes.
5.1.4.
INTERCOM KEY
Press the [INTERCOM] key to initiate / confirm two-way internal communication
between the handsets. To exit the intercom mode by presses the [END] key on the
Handset.
5.1.5. REDIAL KEY
Press the [Lx] key, where x=1,2,3,4 and then Press [REDIAL] to redial the last dialed
number.
or
Press [REDIAL] key to display the last dialed number and then press an available
[Lx] key, where x=1,2,3,4 to automatically dial out the last dialed number.
5.1.6. CID LIST KEY
Press the [CID LIST] key to retrieve CID database.
5.1.7. FLASH KEY
Press [FLASH] key to activate call waiting or 3-way calling.
5.1.8.
HOLD KEY
Press the [HOLD] key to place the call on hold. You can then,
DOCUMENT NO.
VT40-2421 MMI
REV NO.
PAGE
8 of 43
VTECH TELECOMMUNICATIONS LTD.
File :VT40-2421
MMI REV 4.doc
Date : 15 Nov, 2000
TITLE : INTERNAL PRODUCT SPECIFICATION
a) make an intercom for conference call
b) make the second line call for conference
c) transfer the call to another station
5.1.9.
MUTE KEY
Press [MUTE] key to turns off the microphone for privacy or to resume back the
conversation.
5.1.10. SPEAKERPHONE KEY
Press [SPEAKERPHONE] to use the speakerphone for making or answering calls.
To end the call by presses this key again.
5.1.11. FUNCTION KEY
Press the [FUNCTION] will form a function access key by followed function
code [1/4/7/*].
[FUNCTION] [1] DELETE code, to delete the SPEED/CID list memory, or
CID area Code
[FUNCTION] [4] DND code, to activate Do Not Disturb feature
[FUNCTION] [7] PAUSE code, to insert a delay during digits
[FUNCTION] [*] CONFERENCE code, to bridge 3-way conference call
5.1.12. MEM KEY
Press [MEM] key for speed dialing operation and programming parameters.
The list of programming parameters is as below:•
•
•
•
•
•
•
•
•
•
•
•
System Security Code (S.S.C.)
Handset ID Programming.
CO Line Ring Programming.
Handset Ring Type Programming.
Hold-Reminder Time Programming.
FLASH Time Programming.
Tone/Pulse Mode Programming.
Caller ID Area Code Programming (Refer to the Caller ID Operation)
LIU (Line In Use) Enable/Disable Programming
Handset Reset Programming.
Base Unit Reset Programming
System Security Code Registration (Refer to the Installation Operation)
5.1.13. CALLER KEY
Press [CALLER] key for view the caller ID information between ring calls or
see the Caller ID of the waiting caller.
DOCUMENT NO.
VT40-2421 MMI
REV NO.
PAGE
9 of 43
VTECH TELECOMMUNICATIONS LTD.
File :VT40-2421
MMI REV 4.doc
Date : 15 Nov, 2000
TITLE : INTERNAL PRODUCT SPECIFICATION
5.1.14. VOLUME UP/DOWN KEYS
These two keys have the following operations:a) For adjusting speakerphone volume in speakerphone mode (There are total of 5
volume levels setting).
b) For adjusting ringer volume in idle mode (There are total of 3 volume levels
setting Low/Mid/Hi).
c) For adjusting the handset or headset volume when off-hook (There are total of 5
volume levels setting).
d) For editing the speed dial memory
e) For viewing the CID index
f) For editing the CID memory for storing in the speed dial memory
g) For selecting the programming parameters
5.2.
BASE
5.2.1. LED CADENCE
Dark
Solid dark
Lit
solid lit
Slowest
Slow
1sec off, 1sec on repeatedly.
0.5sec off, 0.5sec on repeatedly.
Fast
0.125sec off, 0.125sec on, repeatedly.
wink1
0.250sec off, 1.750sec on, repeatedly.
Wink2 (Reserved)
0.25sec off, 0.250sec on, 0250sec off, 1.250sec on, repeatedly
wink3
0.250sec off, 0.250sec on, 0.250sec off, 0.250sec on, 0.250sec off,
0.750sec on, repeatedly.
5.2.2. POWER LED
This LED indicates the AC power and the base unit status as below:Dark:
The AC power lost.
Slowest:
1sec on, 1sec off, repeatedly.
Within power on 15 seconds, waiting to receive the new S.S.C. period,
Fast:
Base unit in S.S.C. Programming mode.
0.125sec on, 0.125sec off, repeatedly.
The S.S.C. is empty in the Base unit.
Lit:
Base unit is in idle mode.
Wink1:
Wink3:
At least, one user uses the 1 voice channel in this system.
The all 4 voice channels are occupied.
The other users can’t access the voice channel.
DOCUMENT NO.
VT40-2421 MMI
REV NO.
PAGE
10 of 43
VTECH TELECOMMUNICATIONS LTD.
File :VT40-2421
MMI REV 4.doc
5.3.
Date : 15 Nov, 2000
TITLE : INTERNAL PRODUCT SPECIFICATION
CHARGER
5.3.1. CHARGING LED
This LED is used to indicate the charging status of the handset.
5.3.2. SPARE BATT LED
This LED lights, illuminate a spare battery pack has been installed on the charger in
charging condition.
5.4.
LCD on the handset
The LCD of the handset is 2*16 dot matrix with some icons. The top two rows are 2*16 dot matrix.
The 3rd and 4th row is icons and 7-segment display. The full LCD is.
XXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXX
NEW 25 9/02 11:09AM
%1% % 2% %3% % 4 %
2*16 dot matrix
It displays handset ID in standby mode (eg Handset ID is 01).
Handset & CO Line
There are 4 CO lines, 1, 2, 3, and 4
% & CO line OFF: CO Line is idle
% ON & CO line ON: CO Line is in use
% & CO line FLASH: CO Line is held
If the CO line is disconnected, % & CO line is OFF
Ringer
%: Ringer is set to OFF
%FLASH: CO Line is ringing
Press [s
s ] / [t
t ] in idle mode or ringing mode to adjust the ringer volume
Ringer and Handset
Both ringer and Handset icon FLASH: Transfer ring or recall ring
Battery Icon
This icon represents the battery status
NEW Icon
This icon is for new caller ID messages if there is new caller ID in database in idle mode or in retrieve mode.
Caller Counter Icon (eg 25 in fig.1)
This icon has three purposes.
a) New caller ID counter (NEW icon is on)
It means there are 25 new caller ID in database.
Or
DOCUMENT NO.
VT40-2421 MMI
REV NO.
PAGE
11 of 43
VTECH TELECOMMUNICATIONS LTD.
File :VT40-2421
MMI REV 4.doc
Date : 15 Nov, 2000
TITLE : INTERNAL PRODUCT SPECIFICATION
b) Total caller ID counter (NEW icon is off)
It means there are totally 25 caller ID in database.
Or
c) Current ringing Co line (eg line 3)
When Co line 3 is ringing, it will display “L3” instead of caller ID counter. The 1st row will display caller name
and the 2nd row will show caller number.
7-segment for date/time (It is for Caller ID only)
7-segment is for date and time. (eg 9/02 11:09 AM )
It means date and time is September 2 and 11:09am respectively.
DOCUMENT NO.
VT40-2421 MMI
REV NO.
PAGE
12 of 43
VTECH TELECOMMUNICATIONS LTD.
File :VT40-2421
MMI REV 4.doc
6.
Date : 15 Nov, 2000
TITLE : INTERNAL PRODUCT SPECIFICATION
Operations
1. STANDBY MODE
1.
In the Standby mode and the handset ID is programmed,
the display shows as Fig. 1a or 1b or 1c:
HANDSET 01
1a) Handset links with the idle base unit
1b) Handset links with the busy base unit
1c) Handset cannot link with base unit
Note: 1. In the No Service case, the handset may have the
wrong S.S.C., or if the local power is OFF at the base unit or
Fig.1a
HANDSET 01
BUSY
the handset is out of the system service areas.
2. If trying to request a service from the 'Busy' base unit
which all the paths are in use, you will get a audible warning
tone.
Fig.1b
HANDSET 01
NO SERVICE
Fig.1c
DOCUMENT NO.
VT40-2421 MMI
REV NO.
PAGE
13 of 43
VTECH TELECOMMUNICATIONS LTD.
File :VT40-2421
MMI REV 4.doc
Date : 15 Nov, 2000
TITLE : INTERNAL PRODUCT SPECIFICATION
2. INSTALLATION
After charging, the handset is removed it from its charging
cradle, the screen will as Fig. 2.
Registering handset security codes
1. Press [MEM] and the LCD will display the first
programming choice as Fig.3
2. Press [s ] / [t ] until displaying “HS SECUIRTY
CODE”(refer to Fig 4. Show “XXXXXX” or “EMPTY”)
3. Press [#] to confirm this option
4. Enter 6 digits for the security code (see Fig. 5,
eg.123456).
5. Press [#] to confirm the code and the handset will display
Fig. 7 for 3 seconds if the registration is successful and
return to programming mode (refer to Fig. 4).
Registering base security codes
1. Power up the base unit and be sure the handset security
code has been programmed to in the handset
2. Press [MEM] t o enter the programming mode (refer to
Fig 3)
3. Press [s
s ] / [t
t ] until displaying “BU SECUIRTY
CODE”(refer to Fig 6)
4. Press [#] and HOLD the [#] key until a confirmation beep
is heard to indicate the security code is accepted correctly
in the base unit.
5. The handset will display Fig. 7 for 3 seconds if the
registration is successful and return to programming
mode (refer to Fig. 6).
6. After about 15 seconds, if you still do not get the
confirmation, then it means that the programming failed.
The error message is displayed as Fig 8 for 3 seconds and
return to Fig.6 display. In this case, the user has to re-do
from step 1 again.
Note:
HANDSET 01
NO SERVICE
Fig.2
MEMORY
[s ] /[ t ]
Fig.3
HS SECURITY CODE
XXXXXX
[ s ] /[ t ]
Fig.4
PLS ENTER CODE
123456
Fig.5
BU SECURITY CODE
[s ] /[ t ]
If the programming is successful, a happy tone (one beep)
will be emitted.
If the programming is unsuccessful, an error tone(two beeps)
will be emitted.
Fig.6
PROGRAMMING
SUCCESSFUL!
Fig.7
ERROR! PLS
REGISTER AGAIN!
Fig.8
DOCUMENT NO.
VT40-2421 MMI
REV NO.
PAGE
14 of 43
VTECH TELECOMMUNICATIONS LTD.
File :VT40-2421
MMI REV 4.doc
Date : 15 Nov, 2000
TITLE : INTERNAL PRODUCT SPECIFICATION
3. PROGRAMMING HANDSET ID
1.
2.
3.
4.
5.
Press [MEM] to enter the programming mode (refer to
Fig. 3)
Press [s
s ] / [t
t ] until displaying “HANDSET ID”(refer
to Fig. 9)
Press [#] to confirm this option (refer Fig. 9)
Enter 2 digit ID no. (01-12) (refer to Fig.10). For
example, handset ID is 05
Press [#] to confirm the ID no. and the screen will display
Fig. 11 for 3 seconds and return to programming display
as Fig. 9 (The ID will be changed to 05)
HANDSET ID
01
[s ] /[ t ]
Fig.9
PLS ENTER ID NO.
05
Fig.10
PROGRAMMING
SUCCESSFUL!
Fig.11
4. SETTING RINGER VOLUME & ON/OFF
1.
2.
3.
4.
5.
Press [MEM] to enter the programming mode (refer to
Fig 3)
Press [s
s ] / [t
t ] until displaying “CO LINE x RING”
where x=1-4 of your chosen line for setting ringer on/off.
(refer to Fig. 12)
Press [#] to confirm this option
Press [s
s ] / [t
t ] to choose ON or Off
Press [#] to confirm the choice to display either Fig.13 or
Fig.14 and the screen will display Fig. 11 for 3 seconds
and return to programming display as Fig 12.
CO LINE 1 RING
ON
[s ] /[ t ]
Fig.12
CO LINE 1 RING
ON
[s ] /[ t ]
Fig.13
CO LINE 1 RING
OFF
[s ] /[ t ]
Fig.14
5. PROGRAMMING RINGER TYPE (4
TYPES)
1.
2.
RINGER TYPE
Press [MEM] to enter the programming mode (refer to
Fig 3)
Press [s
s ] / [t
t ] until displaying “RINGER TYPE” (refer
to Fig. 15 )
DOCUMENT NO.
VT40-2421 MMI
[s ] /[ t ]
Fig.15
REV NO.
PAGE
15 of 43
VTECH TELECOMMUNICATIONS LTD.
File :VT40-2421
MMI REV 4.doc
3.
4.
5.
Date : 15 Nov, 2000
TITLE : INTERNAL PRODUCT SPECIFICATION
Press [#] to confirm this option.
Choose the ringer type by using [s
s ] / [t
t ] (refer to
Fig.16). The default type is 1.
Press [#] to confirm the choice and the screen will
display Fig. 11 for 3 seconds and return to the
programming display as Fig 15 (Change to type 3)
RINGER TYPE
[s ] /[ t ]
Fig.16
6. PROGRAMMING FLASH TIME
1.
2.
3.
4.
5.
Press [MEM] to enter the programming mode (refer to
Fig 3)
Press [s
s ] / [t
t ] until displaying “FLASH TIME” (refer
to Fig.17)
Press [#] to confirm this option.
Choose the flash time by using [s
s ] / [t
t ] (refer to
Fig.18). (Option is from 100ms to 900ms)
Press [#] to confirm the choice and the screen will
display Fig. 11 for 3 seconds and return to the
programming display as Fig 17. (Change to 300ms)
FLASH TIME
100ms
[s ] /[ t ]
Fig.17
FLASH TIME
300ms
[s ] /[ t ]
Fig.18
7. PROGRAMMING TONE/PULSE MODE
1.
2.
3.
4.
5.
Press [MEM] to enter the programming mode (refer to
Fig. 3)
Press [s] / [t] until displaying “TONE/PULSE” (refer
to Fig..19)
Press [#] to confirm this option.
Select Tone or Pulse by using [s] / [t] (refer to Fig. 20)
Press [#] to confirm the choice and the screen will
display Fig. 11 for 3 seconds and return to the
programming display as Fig. 19. (Change to TONE)
TONE/PULSE
PULSE
[s ] /[ t ]
Fig.19
TONE/PULSE
TONE
[s ] /[ t ]
Fig.20
DOCUMENT NO.
VT40-2421 MMI
REV NO.
PAGE
16 of 43
VTECH TELECOMMUNICATIONS LTD.
File :VT40-2421
MMI REV 4.doc
Date : 15 Nov, 2000
TITLE : INTERNAL PRODUCT SPECIFICATION
8. PROGRAMMING HOLD REMINDER TIME
1.
2.
3.
4.
5.
Press [MEM] to enter the programming mode (refer to
Fig 3)
Press [s] / [t] until displaying “HOLD REMINDER”
(refer to Fig.21)
Press [#] to confirm this option.
Choose the reminder time setting by using [s] / [t]
(refer to Fig. 22) (Option:OFF/15/30/45/60 seconds and
the default is 30 seconds)
Press [#] to confirm the choice and the screen will
display Fig. 11 for 3 seconds and return to the
programming display as Fig 21. (Change to 45 SEC)
HOLD REMINDER
30SEC
[s ] /[ t ]
Fig.21
HOLD REMINDER
45SEC
[s ] /[ t ]
Fig.22
9. PROGRAMMING LINE IN USE DETECT
1.
2.
3.
4.
5.
Press [MEM] to enter the programming mode (refer to
Fig 3)
Press [s] / [t] until displaying “LINE IN USE” (refer
to Fig.23)
Press [#] to confirm this option.
Choose the line in use on or off by using [s] / [t] (refer
to Fig.. 24) (The default is on)
Press [#] to confirm the choice and the screen will
display Fig. 11 for 3 seconds and return to the
programming display as Fig 23. (Change to OFF)
LINE IN USE
ON
[s ] /[ t ]
Fig.23
LINE IN USE
OFF
[s ] /[ t ]
Fig.24
DOCUMENT NO.
VT40-2421 MMI
REV NO.
PAGE
17 of 43
VTECH TELECOMMUNICATIONS LTD.
File :VT40-2421
MMI REV 4.doc
Date : 15 Nov, 2000
TITLE : INTERNAL PRODUCT SPECIFICATION
10. RESET HANDSET PROGRAMMING
1.
2.
3.
4.
Press [MEM] to enter the programming mode (refer to
Fig 3)
Press [s] / [t] until displaying “HANDSET RESET”
(refer to Fig.25)
Press [#] to confirm this option and the LCD will display
Fig 26
Press [#] to confirm the choice and the screen will
display Fig. 11 for 3 seconds and return to the
programming display as Fig 1a or 1b or 1c.
HANDSET RESET
[s ] /[ t ]
Fig.25
RESET YES
Fig.26
11. RESET BASE PROGRAMMING
1.
2.
3.
4.
5.
Re-power the unit
Press [MEM] to enter the programming mode (refer to
Fig. 3)
Press [s] / [t] until displaying “BASE RESET” (refer
to Fig.27)
Press [#] to confirm this option and the LCD will display
Fig. 28
Press [#] to confirm the choice and the screen will
display Fig. 11 for 3 seconds and return to the
programming display as Fig 1a or 1b or 1c.
BASE RESET
[s ] /[ t ]
Fig.27
RESET YES
Fig.28
DOCUMENT NO.
VT40-2421 MMI
REV NO.
PAGE
18 of 43
VTECH TELECOMMUNICATIONS LTD.
File :VT40-2421
MMI REV 4.doc
Date : 15 Nov, 2000
TITLE : INTERNAL PRODUCT SPECIFICATION
12. MAKING OUTSIDE LINE CALL
LINE 2
mm:ss
If trying to request a service from the 'busy' base unit which
all the paths are in use. You will get an audible warning tone.
1.
%2
Press an available [Lx], where x = 1/2/3/4. For example,
Fig.29
press [L2]. The LCD will display Fig. 29
2.
For example, the telephone number is
035775141+PAUSE +2581"
3.
Enter "035775141and then press [FUNCTION][7], then
LINE 2
035775141P
%2
the LCD will display Fig. 30
4.
5.
mm:ss
Then, enter "2581" & the LCD will display Fig. 31.
Some leading digits will be shifted away.
Press [END] to release the call, or put the handset to the
charger to release the call automatically. The screen will
Fig.30
LINE 2
mm:ss
035775141P2581
return to idle mode as Fig.1a
%2
Fig.31
13. ANSWERING CALL
TONY KENT
You may press any one of the digit keys
[1/2/3/4/5/6/7/8/9/0/*/#] to pick up the ringing call, and the
12345678901
L2 9/02 11:09 AM
answer priority is Ringing Intercom Call, Transfer Calls, Hold
Recall Calls, Ringing CO Line Calls. But, you may override
Fig.32
the priority, by press the [Lx] or [ICM] directly.
1.
Handset in the standby mode when the handset rings (eg.
Co line 2), the caller ID will be displayed. (refer to
LINE 2
%2
Fig.32)
2.
Press [any one of the digit] key, or you may press the
Fig.33
ringing [Lx] to pick up the CO ringing line, the LCD will
display as Fig. 33.
3.
mm:ss
Press [END] to release the call, or put the handset to the
charger to release the call automatically. The screen will
return to idle mode as Fig.1a
DOCUMENT NO.
VT40-2421 MMI
REV NO.
PAGE
19 of 43
VTECH TELECOMMUNICATIONS LTD.
File :VT40-2421
MMI REV 4.doc
Date : 15 Nov, 2000
TITLE : INTERNAL PRODUCT SPECIFICATION
14. PR-DIALING
1.
Enter the telephone number, for example:
2.
"0357751412581 and the LCD will display Fig. 34
Press an available [Lx], where x = 1/2/3/4. For example,
0357751412581
press [L2]. The LCD will display Fig. 35
3.
Fig.34
Press [END] to release the call, or put the handset to the
charger to release the call automatically. The screen will
return to idle mode as Fig.1a
LINE 2
0357751412581
mm:ss
%2
Fig.35
15. REDIAL
LINE 2
1.
Standby, press an available [Lx], where x = 1/2/3/4. For
2.
example, if you press [L2], the LCD will display Fig 36.
Press [REDIAL] to redial the last dialed number. The
mm:ss
%2
LCD will display as Fig .37.
Fig.36
LINE 2
0357751412581
mm:ss
%2
Fig.37
16. REDIAL WITH PRE-DAILING
1.
Press [REDIAL] to redial the last dialed number. The
2.
LCD will display as Fig .38
After Last dialing number reviewed, and you want to dial
REDIAL
0357751412581
the number. Press an available [Lx], where x = 1/2/3/4,
handset will pick up the CO line and dial out the number
as display as Fig. 39
Fig.38
LINE 2
0357751412581
mm:ss
%2
Fig.39
DOCUMENT NO.
VT40-2421 MMI
REV NO.
PAGE
20 of 43
VTECH TELECOMMUNICATIONS LTD.
File :VT40-2421
MMI REV 4.doc
Date : 15 Nov, 2000
TITLE : INTERNAL PRODUCT SPECIFICATION
17. HOLD
TRANSFER TO/HOLD
1.
2.
3.
4.
5.
On line (eg. Line 2), the screen will display either Fig. 33
or Fig.35
Press [HOLD], and the LCD will display Fig.40 and
Handset icons will be flashing.
After 10 seconds time out, the display will return to idle
display as Fig. 1a with flashing Handset icons
If the Hold Reminder Time is not disabled, when you
held a CO line over a programmed period of time, a triple
beep will be heard to remind you that the line is still held.
(The hold reminder time can be set from 15/30/45/60
seconds and off. The default is 30 seconds)
If the held CO line is not picked up for 3 minutes, all
handset units will start ringing (i.e., Recall Ring) to
%2
Fig.40
remind all of users. The related icons will be changed.
6.
Press [any one of the digit] key or you may press the
ringing [Lx] to pick up the CO hold recall ringing line,
the LCD will display Fig.33
Note: In this wireless system, the held CO line will be
released when the held line isn’t picked up within 5 minutes.
DOCUMENT NO.
VT40-2421 MMI
REV NO.
PAGE
21 of 43
VTECH TELECOMMUNICATIONS LTD.
File :VT40-2421
MMI REV 4.doc
Date : 15 Nov, 2000
TITLE : INTERNAL PRODUCT SPECIFICATION
MAKE AN INTERCOM CALL
INTERCOM TO
1.
Standby, press the [ICM] key. The LCD will display Fig.
2.
42
Dial desired intercom number, say station 12 calls station
05, the LCD will display Fig. 43
3.
If the Called Party is Idle and Access-able, the calling
Fig.42
INTERCOM TO 05
party station 12 will display Fig. 44 and the called party
station 05 will get an intercom ring and display Fig.45
4.
party station 12 will display Fig.46
5.
Fig.43
If the called party is busy and access-able, the calling
INTERCOM TO 05
RINGING!
If the Called Party is in DND (Ringer Off) Mode and
Access-able, the calling party station 12 will display
Fig.44
Fig.47.
6.
If the called party is an illegal number, the calling party
station will display Fig.48.
INTERCOM BY 12
RINGING!
Note:
-Access-able means the called party is linked with the base
Fig.45
unit.
When the called party is busy or in DND, the called party
station 05 will remain UN-changed. The called party will not
hear a call waiting triple beep for intercom call.
INTERCOM TO 05
BUSY!
- Illegal means the called party is non-existing or loses the
link with this system.
Fig.46
INTERCOM TO 05
DO NOT DISTURB!
Fig.47
INTERCOM TO 05
NOT FOUND!
Fig.48
DOCUMENT NO.
VT40-2421 MMI
REV NO.
PAGE
22 of 43
VTECH TELECOMMUNICATIONS LTD.
File :VT40-2421
MMI REV 4.doc
Date : 15 Nov, 2000
TITLE : INTERNAL PRODUCT SPECIFICATION
18. ANSWERING AN INTERCOM CALL
1.
2.
Handset is ringing, the LCD will display Fig. 45
Press [any one of the digit] key or you may press the
INTERCOM BY 12
TALKING!
[ICM] to pick up the ringing intercom call. The LCD will
display Fig. 49.
3.
The calling party station will show Fig.50
Fig.49
INTERCOM TO 05
TALKING!
Fig.50
19. PAGE CALL TO THE HANDSET
1.
2.
3.
Make an intercom call. The calling party station will
display Fig.44
The called party station 05 will get an intercom ring and
display Fig.45
When the calling party station 12 presses the [ICM] key
again, the intercom ring will be changed to talk
automatically. The calling party station 12 display Fig.
51, while the called party’s LCD will display Fig. 52.
4.
INTERCOM TO 05
TALKING!
Fig.51
INTERCOM BY 12
SPEAKERPHONE!
If the called party station 05 wants to talk by handset, just
press [SPEAKERPHONE] and the LCD will display Fig.
49.
DOCUMENT NO.
Fig.52
VT40-2421 MMI
REV NO.
PAGE
23 of 43
VTECH TELECOMMUNICATIONS LTD.
File :VT40-2421
MMI REV 4.doc
Date : 15 Nov, 2000
TITLE : INTERNAL PRODUCT SPECIFICATION
20. INTERCOM CALL AND PAGE CALL
INTERCHANGING
1.
2.
3.
4.
After make a page call. The calling party station 12 will
display Fig. 51
The called party station 05 will stop ring and display
Fig.52
The calling party station 12 presses the [ICM] key again.
The page will be changed to intercom ring automatically.
The calling party station 12 will display Fig.44
The called party station 05 will get an intercom ring and
display Fig.45
Note:
1. If the called party answers the call by pressing the [ICM] or
[SPEAKERPHONE] key, the intercom call will not change to
“Page Call” mode anymore.
DOCUMENT NO.
VT40-2421 MMI
REV NO.
PAGE
24 of 43
VTECH TELECOMMUNICATIONS LTD.
File :VT40-2421
MMI REV 4.doc
Date : 15 Nov, 2000
TITLE : INTERNAL PRODUCT SPECIFICATION
21. CONFERENCE CALL
LINE 2
mm:ss
The user is allowed to make a three-way conference call.
%2
Two CO lines Conference Call
1.
On CO line, the LCD will display Fig.53 or Fig.54
2.
Press [HOLD], the LCD will display Fig. 55. Handset
3.
icons will be flashing.
Make the second CO line call, the LCD will display Fig.
56
4.
Press [FUNCTION] and LCD will display Fig. 57. The
5.
first line’s icon will be flashing.
Press [CONF] (same as [*]) to bridge the two CO lines
Fig.53
LINE 2
0357751412581
mm:ss
%2
Fig.54
and the LCD will display Fig.58a or Fig.58b if in
TRANSFER TO/HOLD
speakerphone mode
One CO line Conference Call
1.
On CO line, the LCD will display Fig.53 or Fig.54
2.
Press [HOLD], the LCD will display Fig. 55
3.
Make an intercom call to another station (eg.05) and it is
available. The calling party will display Fig. 50 and the
called party will display Fig.49.
4.
Press [FUNCTION]and LCD will display Fig. 57
5.
Press [CONF] (same as [*]) to bridge the two handsets
and one CO lines, the LCD will display Fig.59a or
%2
Fig.55
LINE 3
0357751412555
%2
mm:ss
%3
Fig.56
Fig.59b if in speakerphone mode
(Note: The dialing number field should be blank.)
[1] DEL
[4]DND
[7] PAUSE [*] CONF
%2
%3
Fig.57
L2+L3
0357751412555
%2
mm:ss
%3
Fig.58a
DOCUMENT NO.
VT40-2421 MMI
REV NO.
PAGE
25 of 43
VTECH TELECOMMUNICATIONS LTD.
File :VT40-2421
MMI REV 4.doc
Date : 15 Nov, 2000
TITLE : INTERNAL PRODUCT SPECIFICATION
L2+L3 SPKR
0357751412555
%2
mm:ss
%3
Fig.58b
LINE 2
mm:ss
%2
Fig.59a
LINE 2 SPKR
mm:ss
%2
Fig.59b
22. TRANSFERRING CO CALL
TRANSFER TO/HOLD
1.
2.
On CO line, the LCD will display Fig.53 or Fig.54
Press [HOLD], the LCD will display Fig. 55
3.
After the 10 seconds time-out, the display will revert to
%2
the final idle display if nothing is dialed. If you enter the
transfer station number in time, say station 12 transfer a
call to station 05. Then, the LCD will display Fig .61
4.
A transfer ring will be heard at station 05.
Fig.60
TRANSFR TO 05
The icon below the LCD will indicate the transferred line.
%2
Note: You will hear a call waiting triple beep when you are
on the other line and receive a transfer ring.
DOCUMENT NO.
VT40-2421 MMI
Fig.61
REV NO.
PAGE
26 of 43
VTECH TELECOMMUNICATIONS LTD.
File :VT40-2421
MMI REV 4.doc
Date : 15 Nov, 2000
TITLE : INTERNAL PRODUCT SPECIFICATION
23. TRANSFERRING RECALL
LINE 2
1.
If the transferred call didn't answer over 3 minute, the
system will recall to all handsets to remind there is a line
mm:ss
%2
has been unanswered and in holding state for too long.
The icon below the LCD will indicate the transferred
Fig.62
line.
2.
Press [any one of the digit] key or you may press the
recalling [Lx] to pick up the CO ringing line. The LCD
will display Fig.62.
24. FLASH FUNCTION
You may press the FLASH function key instead of pressing
the hook switch to activate services such as call waiting, 3-
LINE 2
035775141
%2
way calling, etc.
1.
2.
Fig.63
On line, the LCD will display Fig. 63
Press [FLASH] to make a hook switch to the line. The
LINE 2
LCD will display Fig .64
3.
mm:ss
mm:ss
Enter new phone number, or service code and the LCD
will display Fig. 65
%2
Fig.64
LINE 2
0357797196
mm:ss
%2
Fig.65
25. PAUSE FUNCTION
Please refer to “12. Making Outside line call”.
DOCUMENT NO.
VT40-2421 MMI
REV NO.
PAGE
27 of 43
VTECH TELECOMMUNICATIONS LTD.
File :VT40-2421
MMI REV 4.doc
Date : 15 Nov, 2000
TITLE : INTERNAL PRODUCT SPECIFICATION
26. TONE FUNCTION
LINE 2
mm:ss
035775141*2581
If you have pulse service and wish to access a computer or
%2
calling service that use tone.
Fig.66
1.
On line, and dialed digits in pulse. The LCD will display
Fig. 63
2.
Press [TONE] (same as [*]) to change the dialing mode
to TONE mode. And then enter the rest digits will be
dialed as TONE signal. The LCD will display Fig. 66
Note: When you release the line, the dial mode will change to
the pulse mode again automatically.
27. DO NOT DISTURB FUNCTION
1.
Press [FUNCTION] to display Fig. 57. And then press
[DND] (same as [4]) to activate DND. The LCD will
HANDSET 11
DO NOT DISTURB
display Fig. 67a
2.
To cancel the DND mode, press [FUNCTION] and then
Fig.67a
press [DND] (same as [4]) again to disable DND mode.
The handset will be return to idle mode (Fig. 67b)
HANDSET 11
Fig.67b
28. MUTE FUNCTION
The Mute feature turns off the microphone so the person at
the other phone cannot hear you. The Mute feature
automatically cancels when you hang up or change lines.
1.
On line, press [MUTE] key for privacy, the LCD will
2.
display Fig .68
To resume your conversation, press the [MUTE] key
MUTE!
03577971*96
mm:ss
%2
Fig.68
again and will display Fig. 69.
DOCUMENT NO.
VT40-2421 MMI
REV NO.
PAGE
28 of 43
VTECH TELECOMMUNICATIONS LTD.
File :VT40-2421
MMI REV 4.doc
Date : 15 Nov, 2000
TITLE : INTERNAL PRODUCT SPECIFICATION
29. OUT OF RANG WARNING
The LCD will display the “Out Of Range” and a double beep
warning when the handset is too far from the base unit. You
LINE 2
03577971*96
mm:ss
%2
have to move closer to the base unit for clear conversation.
Fig.69
1.
Walking out from base unit service area, the LCD will
display Fig. 72
2.
If the user walks back to the base unit after he/she receive
LINE 2
03577971*96
mm:ss
the Out Of Range warning (O.O.R.), the handset will stop
3.
%2
the O.O.R. warning and return to Fig.71
If the user keeps walking away from the base unit service
Fig.71
area, once the system lose the signal for a period of time,
say 20 seconds, then the base will disconnect the call.
OUT OF RANGE
03577971*96
%2
Fig.72
30. BATTRY LOW WARNING
The warning indicator appears when the battery of the handset
becomes weak. If you are on a call when battery low, you will
hear the double beep, end the conversation as soon as
possible. Otherwise, you may lose the call. The icon will warn
you about the battery at low status.
31. COMPLETE WITH HEADSET
The Headset unit frees your hands so you can keep working.
Plug the headset into the headset jack. The voice will be
switched to the headset unit automatically. Plug out the
headset when you want to talk by handset. The voice will be
switched to the handset automatically.
DOCUMENT NO.
VT40-2421 MMI
REV NO.
PAGE
29 of 43
VTECH TELECOMMUNICATIONS LTD.
File :VT40-2421
MMI REV 4.doc
Date : 15 Nov, 2000
TITLE : INTERNAL PRODUCT SPECIFICATION
32. COMPLETE WITH SPEAKERPHONE
The speakerphone function frees your hands so you can keep
working, too.
Press the [SPEAKER] key to turn on the speakerphone
function when you are using the handset unit. The voice will
be switched to the speakerphone.
If the user wants to come back handset mode. Press
[SPEAKERPHONE] again to switch the voice to the handset
automatically.
Note: If the headset unit has plugged in the handset, the
speakerphone would not work.
33. VOLUME CONTROL
Adjusting the handset/speaker/headset volume level
While using the handset or speaker or handset, the user may
LINE 2
VOLUME
mm:ss
%2
adjust the volume level of pressing [s]/[t] and the LCD will
show Fig.73 for 3 seconds after the volume is set.
Fig.73
There are 5 receiver volume levels (Level 1,2,3,4,5). The
default level is middle (Level 3).
.A warning beep will be heard when the volume is set at the
maximum (Level 5) and minimum level (Level 1)
HANDSET 11
RINGER:HIGH
%2%
Adjusting the Ringe r volume
Fig.74
1. While the telephone is idle (not being used), the user may
adjust the ringer volume level by pressing [s]/[t] key.
2 The LCD will automatically show “RINGER:HIGH” or
“RINGER: MID” or “RINGER: LOW” . For example, if the
user increases the ringe r volume from ringer low to ringer
high, the display will show Fig. 74 for 3 seconds. Then, the
display will return to idle mode as Fig. 1a.
There are 3 ringer volume levels (Low/Mid/High). The
default level is middle.
DOCUMENT NO.
VT40-2421 MMI
REV NO.
PAGE
30 of 43
VTECH TELECOMMUNICATIONS LTD.
File :VT40-2421
MMI REV 4.doc
Date : 15 Nov, 2000
TITLE : INTERNAL PRODUCT SPECIFICATION
34. SPEED DIALING OPERATION
The Speed Dialing memory stores 20 names and phone
MEMORY
t]
[s ]/[t
numbers. Name: maximum 16 characters. Number:
maximum 30 digits.
Storing the information into speed dialing memory
1. Press [MEM] to enter the programming mode and the
LCD display “MEMORY” (refer to Fig. 75)
2. Press [#] to confirm this option
3. The SPEED MEMORY will be displayed. (refer to Fig.
75a)
4. Enter speed dialing memory index or use [s] / [t] to
choose another memory location. (Fig. 77a and Fig. 77b)
NOTE:
1. If the number length is longer than 12, the LCD will
show 2nd page for more numbers information after 3
seconds automatically.
2. Use Down arrow to view the next record (eg. memory
05 to 06)
3. Use up arrow to view back the previous record (eg.
Memory 05 to 04)
4. When the display shows "SPEED MEMORY", the user
can either view the memory index ( eg M02) by pressing
the down arrow twice or enter the index no. 02.
5.
6.
7.
8.
9.
Press [#] to confirm the chosen memory
Use the [s]/[t] key for the Backward/Forward the
cursor to edit the name. When the cursor is moved to the
character to be changed, that character will flash.
Press [#] to confirm the name.
Use the [s]/[t] key for the Backward/Forward the
cursor to edit the phone no. When the cursor is moved to
the digit to be changed, that digit will flash.
Press [#] to confirm the storing and LCD shows Fig. 78
for 3 seconds with a happy tone and return to the
programming mode as Fig. 77b.
Note:
- If the user would like to store the “#” character in name
field or in the number field, he must press and hold the [#]
over 2 seconds.
-Repeatedly press the dial pad key that letter or symbols, until
Fig.75
SPEED MEMORY
t]
[s ]/[t
Fig.75a
EMPTY
M01
MARY GROTE
1762337890
M01
EMPTY
M05
the display shows the letter or symbol that you want to save.
1 for , - ' & . ( ) @ 1
2 for A, B, C, a, b, c, 2
Fig.77a
3 for D, E, F, d, e, f, 3
4 for G, H, I, g, h, i, 4
5 for J, K, L, j, k, l, 5
6 for M, N, O, m, n, o, 6
7 for P, Q, R, S, p, q, r, s, 7
DOCUMENT NO.
VT40-2421 MMI
REV NO.
PAGE
31 of 43
VTECH TELECOMMUNICATIONS LTD.
File :VT40-2421
MMI REV 4.doc
Date : 15 Nov, 2000
TITLE : INTERNAL PRODUCT SPECIFICATION
8 for T, U, V, t, u, v, 8
9 for W, X, Y, Z, w, x, y, z, 9
0 for 0, “SPACE”
* for *
TONY KENT
1367225678
M05
# for #
Fig.77b
Reviewing the information from speed dialing memory
1.
User could review the speed dialing memory by repeating
the above step 1 to step 5.
Dialing information from speed dialing memory
1.
User could review the speed dialing memory by repeating
the above step 1 to step 4.
2.
Press an available [Lx], where x = 1/2/3/4, handset will
PROGRAMMING
SUCCESSFUL!
Fig.78
automatically pick up the CO line and dial out the
number.
Dialing Information after pick up the line
1.
2.
Press an available [Lx], where x = 1/2/3/4, handset will
automatically pick up the CO line and shows Fig. 64.
Press [MEM] to enter the programming mode.
Enter speed dialing memory index (01-20), for example”12”,
it will automatically dial out the content in the memory index
12 and the LCD will display Fig.71(eg. memory no. is
03577971*96)
DOCUMENT NO.
VT40-2421 MMI
REV NO.
PAGE
32 of 43
VTECH TELECOMMUNICATIONS LTD.
File :VT40-2421
MMI REV 4.doc
Date : 15 Nov, 2000
TITLE : INTERNAL PRODUCT SPECIFICATION
35. REMOVING ONE INFORMATION FROM
SPPED DIAL MEMORY
[1] DEL
[4]DND
[7] PAUSE [*] CONF
Removing one information from speed dial memory
1.
User could review the speed dialing memory by repeating
the above step 1 to step 5.
2.
Fig.79
Once the memory to be deleted is displayed (eg. memory
05 (Fig.77b), press [FUNCTION] and the LCD will
display Fig.79
3.
Press [DEL] (same as [1]) to delete the memory(eg.
4.
delete memory 5). The LCD will display Fig. 80.
Press [#] to confirm the deletion, the LCD display Fig
TONY KENT
DELETE?
.81a for 3 seconds and return to the programming display
Fig.80
A0
as Fig 81b.
Removing alle informat ion from speed dial memory
1.
User could review the speed dialing memory by repeating
M05
PROGRAMMING
SUCCESSFUL!
the above step 1 to step 3. (fig 75a)
2.
3.
Press [FUNCTION] and the LCD will display Fig.79
Press [DEL] (same as [1]) to delete all speed dial
Fig.81a
memory (Fig 81c)
4.
Press [#] to confirm the deletion, the LCD display Fig
.81a for 3 seconds and return to the programming display
as Fig 75a.
EMPTY
M05
Fig.81b
SPEED MEMORY
DELETE ALL?
Fig.81C
DOCUMENT NO.
VT40-2421 MMI
REV NO.
PAGE
33 of 43
VTECH TELECOMMUNICATIONS LTD.
File :VT40-2421
MMI REV 4.doc
Date : 15 Nov, 2000
TITLE : INTERNAL PRODUCT SPECIFICATION
36. PROGRAMMING AREA CODE
The Cordless System provides 1 home area code and 5 local
area codes that are programmable.
HOME AREA CODE
EMPTY
[s ] /[ t ]
--- If the phone number came from your home area code (the
one you programmed), the LCD displays only the phone
number (without an area code).
Fig.82
HOME AREA CODE
EMPTY
--- If the phone number does not come from your home area
codes, the LCD displays the phone number with the area code
prefixed.
HOME AREA CODE
Programming the Home Area Code
1.
2.
3.
4.
5.
Fig.83
Press [MEM] to enter programming mode (refer to Fig
75)
Press [s
s ] / [t
t ] until displaying “HOME AREA
CODE”(refer to Fig. 82)
Press [#] to confirm this option and the screen will
display Fig.83)
Enter 3 digit home area code (refer to Fig. 84)
Press [#] to confirm no. and the screen will display Fig.
85 for 3 seconds and return to the programming display
as Fig 82.(Change to 527)
527
Fig.84
PROGRAMMING
SUCCESSFUL!
Fig.85
Programming the Local Area Code
1.
2.
3.
4.
5.
Press [MEM] to enter programming mode (refer to Fig
75)
Press [s
s ] / [t
t ] until displaying “LOCAL AREA CODE
x” where x=1-5(refer to Fig. 86a)
Press [#] to confirm this option and the screen will
display Fig. 86b)
Enter 3 digit local area code (eg.522, the LCD will
display Fig.86c)
Press [#] to confirm the no. and the screen will display
Fig. 85 for 3 seconds and return to the programming
display as Fig 86a. (Change to 522)
Erasing the Local Area Code
1. Press [MEM] to enter programming mode (refer to Fig
75)
2. Press [s
s ] / [t
t ] until displaying “LOCAL AREA CODE
x” where x=1-5(eg refer to Fig. 86a)
3. Press [#] to confirm this option
LOCAL AREA CODE2
123
[s ] /[ t ]
Fig.86a
LOCAL AREA CODE2
123
Fig.86b
LOCAL AREA CODE2
522
Fig.86c
DOCUMENT NO.
VT40-2421 MMI
REV NO.
PAGE
34 of 43
VTECH TELECOMMUNICATIONS LTD.
File :VT40-2421
MMI REV 4.doc
4.
Date : 15 Nov, 2000
TITLE : INTERNAL PRODUCT SPECIFICATION
Press [FUNCTION] to display Fig. 79 and then press
[DEL] (same as [1]) to erase the CID Area code. The
5.
LCD will display Fig. 87
Press [#] to confirm the ID no. and the screen will display
LOCAL AREA CODE2
DELETE?
Fig. 85 for 3 seconds and return to the programming
display as Fig 86a. (But, change to “EMPTY”)
DOCUMENT NO.
VT40-2421 MMI
Fig.87
REV NO.
PAGE
35 of 43
VTECH TELECOMMUNICATIONS LTD.
File :VT40-2421
MMI REV 4.doc
Date : 15 Nov, 2000
TITLE : INTERNAL PRODUCT SPECIFICATION
37.CALLER ID
TONY KENT
Display
If the Caller ID service is available from your telephone
12345678901
L2 9/02 11:09 AM
company, and you have requested this feature, the LCD will
show the telephone name and number of the incoming calls.
When you receive a call, the caller's Number & Name is
displayed as:
“ Name & Number”: Name and number are sent from your
Fig.88a
NO CALLER INFO
123456979
L2 9/02 11:09 AM
telephone company (refer to Fig. 88a)
If there is no name with telephone no., it will show "NO
CALLER INFO” on the first row. (refer to Fig. 88b)
If there is name without number, it will show “NO CALLER
INFO” on the 2nd row. (refer to Fig. 88c)
Fig.88b
TONY KENT
NO CALLER INFO
L2 9/02 11:09 AM
"Private": Incoming caller’s Name Private indicator (refer to
Fig. 88d)
Fig.88c
"Out Of Area": Incoming caller’s Name Out -Of-Area
indicator (refer to Fig. 88e)
PRIVATE
L2 9/02 11:09 AM
View the caller ID information between ringing calls
If you get more than one line ringing at the same time, you
Fig.88d
can check the caller from these different lines to decide which
line should be answered with higher priority.
OUT OF AREA
1. Handset in standby mode, line 2 and line 3 ringing, the
L2 9/02 11:09 AM
LCD shows line 2 caller information as Fig. 89
1.
Press [CALLER] again to check the Line 3 caller
information and the screen will display Fig. 90.
2.
Press [CALLER] again will back to normal mode.
TONY KENT
3.
Press [CALLER] again to check the Line 2 caller
12345678901
L2 9/02 11:09 AM
information and the screen will return to Fig. 89.
Fig.88e
Enter the CID data base retrieve mode
Fig.89
You may enter the CID Database, which stored the latest 50
calls, and you may use some very useful features during the
view of the database.
1.
JIMMY SMITH
654335678
L3 9/02 11:09 AM
Standby, press [CID LIST] to enter CID database retrieve
mode. The LCD will display Fig. 91
Fig.90
DOCUMENT NO.
VT40-2421 MMI
REV NO.
PAGE
36 of 43
VTECH TELECOMMUNICATIONS LTD.
File :VT40-2421
MMI REV 4.doc
Date : 15 Nov, 2000
TITLE : INTERNAL PRODUCT SPECIFICATION
Delete all callers information
1.
Press [CID LIST] to show Fig.91
2.
To delete all callers information, press [FUNCTION] to
display Fig. 79 and then press [DEL] (same as [1]). The
LCD displays Fig. 92
3.
ALL CID: XX
NEW CID: XX
Š%‹
Š%‹
Press [#] to confirm the choice and the LCD will shows
Fig. 93
Delete a single callers information
1.
Press [CID LIST] to show Fig.91
2.
Use [s
s ] / [t
t ] key to scroll the CID information, which
4.
you wish to delete. (eg. Fig .94)
Press [FUNCTION] and the LCD will display Fig. 95.
5.
Press [DEL] (same as [1]) to delete the caller data. The
Press [#] to confirm the choice and the LCD will shows
Fig.96.
Dial back for the caller on the display
1.
2.
DELETE ALL CID?
[MEM]
Š%‹
Š%‹
NOTE: During the review mode, if the Caller number
length is longer than 13, the LCD will show 2nd page for
Š% ‹
Š%‹
Fig.92
ALL CID: 00
NEW CID: 00
Š%‹
Š%‹
Press [CID LIST] to show Fig.91
Use [s
s ] / [t
t ] key to scroll the CID information, which
you wish to dial. (eg. Fig .94)
Š%‹
Fig.91
LCD displays Fig. 96a.
6.
Š%‹
Š% ‹
Š%‹
Fig.93
JIMMY SMITH
L2:6543335678
NEW 25 9/02 11:09 AM
more numbers information after 3 seconds automatically.
Fig.94
3.
Press an available [Lx] (where x = 1/2/3/4) to pick up the
CO line. And then the unit will dial out the number
automatically. The LCD will show fig. 97
[1] DEL
[4]DND
[7] PAUSE [*] CONF
Note:
1.
If the phone number came from your home area code, the
call will be dialed only the 7-phonenumber (without an
Fig.95
79
area code).
2.
If the phone number came from one of your local area
code, the call will be dialed 10 digits including the local
area code prefixed.
3.
JIMMY SMITH
DELETE?
If the phone number did not come from any of your area
codes (the ones you programmed), and then there are 2
cases:
Fig.96a
Case 1: If the phone number is more than or equal to
10, the phone will automatically insert and display '1',
the call will be dialed all digits with the leading digit
“1”.
DOCUMENT NO.
VT40-2421 MMI
REV NO.
PAGE
37 of 43
VTECH TELECOMMUNICATIONS LTD.
File :VT40-2421
MMI REV 4.doc
Date : 15 Nov, 2000
TITLE : INTERNAL PRODUCT SPECIFICATION
Case 2: If the phone number is less than 10, the phone
will dial the phone number only without the leading
DELETED !
“1”.
Store a caller number into speed dialing memory
1.
2.
you wish to store. (eg. Fig .94)
3.
Fig.96
Press [CID LIST] to show Fig.91
Use [s ] / [t ] key to scroll the CID information, which
Press [MEM] to enter the programming mode and the
LCD will display Fig. 98
Press [#] to confirm this option
The SPEED MEMORY index will be displayed.
Enter speed dialing memory index or use [s] / [t] to
choose another memory location. (eg. choose M05, the
display will be as Fig. 99 or 100)
7. Press [#] to confirm the chosen memory location and the
LCD will display Fig.99 or 100.
8. Press [CID LIST] Key to show Fig.101a.
9. Use the [s]/[t] key for the Backward/Forward the
cursor to edit the name. When the cursor is moved to the
character to be changed, that character will flash.
10. Press [#] to confirm the name.
11. Use the [s]/[t] key for the Backward/Forward the
cursor to edit the phone no. When the cursor is moved to
the digit to be changed, that digit will flash.
12. Press [#] to confirm the storing and LCD shows Fig. 101
for 3 seconds with a happy tone and return to the
programming mode as Fig. 101a.
LINE 2
16543335678
mm:ss
%2
4.
5.
6.
Fig.97
MEMORY
[s ] /[ t ]
Fig.98
EMPTY
M05
Fig.99
MARY GROTE
1762337890
M05
Fig.100
JIMMY SMITH
16543335678
Type II Caller ID
M05
This is a telephone service that identifies a waiting caller
without interrupting your current call.
This feature gives you the informed choice of whether or not
to take the incoming call.
The operation is same as the normal operation. Please see the
example below:
Fig.101a
PROGRAMMING
SUCCESSFUL!
Suppose that you are talking on Line#2. The LCD displays
Fig. 102
Fig.101
DOCUMENT NO.
VT40-2421 MMI
REV NO.
PAGE
38 of 43
VTECH TELECOMMUNICATIONS LTD.
File :VT40-2421
MMI REV 4.doc
Date : 15 Nov, 2000
TITLE : INTERNAL PRODUCT SPECIFICATION
1. After hearing a short CPE Alert Signal (CAS), the LCD
will display the new incoming Caller ID automatically. If you
want to view the new incoming Call ID of this line when you
are doing something else, press [CALLER] and see the Caller
LINE 2
1367225678
mm:ss
%2
ID of the waiting caller as Fig. 103
Fig.102
2. Press [CALLER] again to return the original line#2 talking
mode as Fig 102.
TONY KENT
1234567890
L2 9/02 11:09 AM
%2
Fig.103
DOCUMENT NO.
VT40-2421 MMI
REV NO.
PAGE
39 of 43
VTECH TELECOMMUNICATIONS LTD.
File :VT40-2421
MMI REV 4.doc
Date : 15 Nov, 2000
TITLE : INTERNAL PRODUCT SPECIFICATION
38.CALLER ID MESSAGE WAITING
Your telephone company may send a "Message Waiting"
signal to you. You can retrieve the messages through your
MESSAGE WAITING
ON LINE 1, 2, 3,4
telephone company. For example, Fig. 104a shows someone
left messages to you on Line 1, 2, 3, 4. Fig. 104b shows
Fig.104a
someone left messages to you on Line 3 only.
Delete the display of the message waiting
1.
Press [FUNCTION] & the LCD Fig.95 and then press
2.
[DEL] (same as [1]. The LCD will display Fig. 105
Suppose that the user presses ”3”, the LCD will display
MESSAGE WAITING
ON LINE
Fig.104b
Fig. 106
3.
Suppose that the user presses “0” (all 4 CO lines). The
LCD will display return to idle mode as Fig. 107
DEL MSG DISPLAY?
[1, 2, 3, 4, ALL(0)]
Fig.105
MESSAGE WAITING
ON LINE 1, 2, 4
Fig.106
HANDSET 11
Fig.107
39.PRROMGRAMMING SEQUENCE
Once entering the programming mode, pressing [s
s ] / [t
t ] will cycle through the programming parameters’
display in the following sequence.
1.
2.
3.
4.
5.
6.
MEMEORY
CO LINE 1 RING
CO LINE 2 RING
CO LINE 3 RING
CO LINE 4 RING
RINGER TYPE
DOCUMENT NO.
VT40-2421 MMI
REV NO.
PAGE
40 of 43
VTECH TELECOMMUNICATIONS LTD.
File :VT40-2421
MMI REV 4.doc
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
Date : 15 Nov, 2000
TITLE : INTERNAL PRODUCT SPECIFICATION
HS SECURITY CODE
BU SECURITY CODE
HANDSET ID
HOLD REMINDER
TONE/PULSE
FLASH TIME
HOME AREA CODE
LOCAL AREA CODE 1
LOCAL AREA CODE 2
LOCAL AREA CODE 3
LOCAL AREA CODE 4
LOCAL AREA CODE 5
LINE IN USE
HANDSET RESET
BASE RESET
If the user has finished all the programming, Press [END] to exit the programming mode and return to the idle
display.
DOCUMENT NO.
VT40-2421 MMI
REV NO.
PAGE
41 of 43
VTECH TELECOMMUNICATIONS LTD.
File :VT40-2421
MMI REV 4.doc
DOCUMENT NO.
Date : 15 Nov, 2000
VT40-2421 MMI
TITLE : INTERNAL PRODUCT SPECIFICATION
REV NO.
PAGE
42 of 43
VTECH TELECOMMUNICATIONS LTD.
File :VT40-2421
MMI REV 4.doc
7.
Date : 15 Nov, 2000
TITLE : INTERNAL PRODUCT SPECIFICATION
FCC Warning Statement
7.1.
FCC Warning Statement
Caution to User: the changes or modification not expressly approved by the party responsible or
Compliance could void the user’s authority to operate the equipment.
7.2.
RF Exposure Warning Statement
The 40-2421 is classified as a portable device and it does not operate in the one of the services listed
in Section 2.1093(c). Therefore, the 40-2421 is categorically excluded from routine environmental
evaluation for RF exposure as per section 2.1093(c).
* Important Notic e
Since this equipment has very low output power (EIRP <5 dBm), it complies with the FCC
RF Exposure Limit.
DOCUMENT NO.
VT40-2421 MMI
REV NO.
PAGE
43 of 43
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Creator                         : Microsoft Word
Create Date                     : 2001:05:13 14:24:55
Title                           : 4_.PDF
Author                          : csr
Producer                        : Acrobat PDFWriter 4.05 for Windows
Modify Date                     : 2001:04:27 15:33:36-06:00
Page Count                      : 43
EXIF Metadata provided by EXIF.tools
FCC ID Filing: D6X402421

Navigation menu