Teleco Automation S r l TXRW433US Remote Control, Gates, Doors, Shutters, etc. User Manual istrW gb USA

Teleco Automation S.r.l. Remote Control, Gates, Doors, Shutters, etc. istrW gb USA

Contents

User Manual and Operational Description TXW

TELECO Automation Srl Viale Del Lavoro 531010 Colle Umberto (TV) - ItalyTel. +39.0438.388511 - Fax 0438.388536 www.telecoautomation.comE mail: teleco.automation@nline.itABDCWall fasteningTX must be fastened to a smooth wall free from grooves andaway from metal surfaces and objects.Fasten the lower part with the Fischer screws supplied. Thenpush in the upper part and apply the front cover to close theunit.Pulling out the front coverThis is necessary any time that :- you need to have access to the programming push buttonP3 ;- you need to replace the battery ;- you need to open the container for maintenance.Pulling out the upper shellIf it is necessary to open the transmitter, follow this procedure :press the points marked with A and B or C and D with ascrewdriver and remove the upper shell.Product descriptionSuperheterodyne radio control devices, with thecarrier frequency in the UHF band controlled by sawresonator, for the remote control of electronic andelectrical appliances in conformity with the laws andstandards in force.The type of rolling code transmission signal makes itimpossible to duplicate.The transmitter code can be inserted (memorised)either directly into the receiver or via radio from thetransmitter. The second possibility allows you to insertnew transmitters into an existing system withouthaving to have the receiver on hand. This may becarried out easily by the user without the help of theinstaller whilst still guaranteeing the total secrecy ofthe code.The user code is memorised under EEprom in thereceiver which maintains the code information evenwhen faced with blackouts.Caution !Changes or modifications not expressly approvedby the manufacturer could void the user’sauthority to operate the equipment.TransmittersThe transmitters are encoded in the factory and each transmitter has itsown unique code.Caution!If you keep a channel button pressed down for more than 30 seconds thetransmitter will automatically switch off.The transmitters are available in 2 or 4 channel versions with the followingcodes:TXW433US2 2 channel transmitterTXW433US4 4 channel transmitterTechnical data - carrier frequency 433.92 MHz- carrier frequency tolerance ±75 KHz- modulation AM/ASK- signal modulation PCM, 1.3 ms/bit- power supply 12V ± 10%(Alkaline battery GP23A)- maximum power consumption 28 mA- operating temperature range - 10° _ +55°CP3-+TYPE RS433Mod.: TXW WALLRev. USA0102

Navigation menu