Teleco Automation S r l TXRW433US Remote Control, Gates, Doors, Shutters, etc. User Manual istrW gb USA

Download:
Mirror Download [FCC.gov]
Document ID	224921
Application ID	ql8rhXFnIXQ+eueVcbi+bQ==
Document Description	User Manual and Operational Description TXW
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	13.94kB (174281 bits)
Date Submitted	2002-02-06 00:00:00
Date Available	2002-02-06 00:00:00
Creation Date	2002-01-26 11:11:59
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2002-01-26 11:11:59
Document Title	Microsoft Word - istrW_gb-USA
Document Creator	ADOBEPS4.DRV Version 4.50
Document Author:	Gene.sys

TELECO Automation Srl
Viale Del Lavoro 5
31010 Colle Umberto (TV) - Italy
Tel. +39.0438.388511 - Fax 0438.388536 www.telecoautomation.com
E mail: teleco.automation@nline.it
TYPE RS433
Mod.: TXW WALL
Rev. USA0102
Wall fastening
P3
TX must be fastened to a smooth wall free from grooves and
away from metal surfaces and objects.
Fasten the lower part with the Fischer screws supplied. Then
push in the upper part and apply the front cover to close the
unit.
Pulling out the upper shell
If it is necessary to open the transmitter, follow this procedure :
press the points marked with A and B or C and D with a
screwdriver and remove the upper shell.
Pulling out the front cover
This is necessary any time that :
- you need to have access to the programming push button
P3 ;
- you need to replace the battery ;
- you need to open the container for maintenance.
Product description
Transmitters
Superheterodyne radio control devices, with the
carrier frequency in the UHF band controlled by saw
resonator, for the remote control of electronic and
electrical appliances in conformity with the laws and
standards in force.
The type of rolling code transmission signal makes it
impossible to duplicate.
The transmitter code can be inserted (memorised)
either directly into the receiver or via radio from the
transmitter. The second possibility allows you to insert
new transmitters into an existing system without
having to have the receiver on hand. This may be
carried out easily by the user without the help of the
installer whilst still guaranteeing the total secrecy of
the code.
The user code is memorised under EEprom in the
receiver which maintains the code information even
when faced with blackouts.
The transmitters are encoded in the factory and each transmitter has its
own unique code.
Caution!
If you keep a channel button pressed down for more than 30 seconds the
transmitter will automatically switch off.
The transmitters are available in 2 or 4 channel versions with the following
codes:
Caution !
Changes or modifications not expressly approved
by the manufacturer could void the user’s
authority to operate the equipment.
TXW433US2
TXW433US4
2 channel transmitter
4 channel transmitter
Technical data
- carrier frequency
- carrier frequency tolerance
- modulation
- signal modulation
- power supply
(Alkaline battery GP23A)
- maximum power consumption
- operating temperature range
433.92 MHz
±75 KHz
AM/ASK
PCM, 1.3 ms/bit
12V ± 10%
28 mA
- 10° _ +55°C

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2002:01:26 11:11:59+01:00
Modify Date                     : 2002:01:26 11:11:59+01:00
Page Count                      : 1
Creation Date                   : 2002:01:26 10:11:59Z
Mod Date                        : 2002:01:26 10:11:59Z
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : Gene.sys
Metadata Date                   : 2002:01:26 10:11:59Z
Creator                         : Gene.sys
Title                           : Microsoft Word - istrW_gb-USA

EXIF Metadata provided by EXIF.tools