Telepower Communication TPS900 Smart POS Terminal User Manual

Telepower Communication Co., Ltd. Smart POS Terminal

User Manual

Card Reading1.NFC tag, put the NFC tag over the printer case of thedevice.2.Smart card, insert the smart card to the slot,chip should bedownside.3.Magnetic card, put the card to the slot, then swipeit.4AccessoriesMainDevice 1Set PowerAdapter 1PieceBattery 1Piece UserGuide 1VolumeThis device complies with part 15 of the FCC Rules. Operation is subject tothe condition that this device does not cause harmful interferenceAny Changes or modifications not expressly approved by the partyresponsible for compliance could void the user's authority to operate theequipment.This equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to part 15 of the FCC Rules. These limitsare designed to provide reasonable protection against harmful interferencein a residential installation. This equipment generates uses and can radiateradio frequency energy and, if not installed and used in accordance withthe instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmful interference toradio or television reception, which can be determined by turning theequipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that towhich the receiver is connected.-Consult the dealer or an experienced radio/TV technician for help.This device was tested for typical body-worn operations. To comply withRF exposure requirements, a minimum separation distance of 0 cm mustbe maintained between the user’s body and the handset, including theantenna. Third-party belt-clips, holsters, and similar accessories used bythis device should not contain any metallic components. Body-wornaccessories that do not meet these requirements may not comply with RFexposure requirements and should be avoided. Use only the supplied or anapproved antenna.TPS900 EFT POSUser Guide
TPS900 Specification1SIM Card, PSAM & TF CardInstallation1. Take out the back cover and battery, the card socketswillbeshown.2. Push the SIM card into the socket correctly. Be suretheSIM card is in rightposition.2Battery Installation1.Open the back cover and put the battery intotheholder. Install the battery in rightdirection.2.Put the cover back to theterminal.Warning: The changing of wrong battery type has risk tobe explosive.Warning: Don't throw battery casually.Before using the POS terminal, ensure that all theaccessories above are included in the package.If you have any problems, please contact the servicesprovider of the distributors.3ProcessorQualcomm 8909, Quad-core, 1.1GOSAndroid 5.1Memory8GB FLASH, 1GB RAM,optional 16GB Flash, 2GB RAMExt. MemoryTF Card, up to 32GBDisplay5.5”, TFT1280*720Magnetic Card ReaderTrack 1/2/3, bi-directional swipe,ISO7810, ISO7811, ISO7812Smart Card Reader(Optional)ISO 7816PSAMoptional 2 slotsContactless Card Reader(Optional)ISO14443 Type A/B, Mifare®,ISO18092 compliantCamera5 megapixels, auto focusFingerprintOptionalGPSBuilt-inSIM2CommunicationsFDD-LTE/TDD-LTE/WCDMA/GPRS/WIFI/BluetoothPeripheral Ports1 Micro USBPower SupplyInput: 100-240V AC; Output: 5V DC, 2A.BatteryLi-ion, 7.4V, 2200mAh

Navigation menu