Telepower Communication TPS900 Smart POS Terminal User Manual
Telepower Communication Co., Ltd. Smart POS Terminal
User Manual
Card Reading Accessories 1. NFC tag, put the NFC tag over the printer case of the device. 2. Smart card, insert the smart card to the slot, chip should bedownside. 3. Magnetic card, put the card to the slot, then swipeit. MainDevice 1Set Battery 1Piece PowerAdapter UserGuide 1Piece 1Volume This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 0 cm must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna. TPS900 EFT POS User Guide TPS900 Specification Processor Qualcomm 8909, Quad-core, 1.1G OS Android 5.1 Memory 8GB FLASH, 1GB RAM, optional 16GB Flash, 2GB RAM Ext. Memory TF Card, up to 32GB Display 5.5”, TFT1280*720 Magnetic Card Reader Track 1/2/3, bi-directional swipe, ISO7810, ISO7811, ISO7812 Smart Card Reader (Optional) ISO 7816 PSAM optional 2 slots Contactless Card Reader (Optional) ISO14443 Type A/B, Mifare®, ISO18092 compliant Camera 5 megapixels, auto focus Fingerprint Optional GPS Built-in SIM Communications FDD-LTE/TDD-LTE/WCDMA /GPRS/WIFI/Bluetooth Peripheral Ports 1 Micro USB Power Supply Input: 100-240V AC; Output: 5V DC, 2A. Battery Li-ion, 7.4V, 2200mAh SIM Card, PSAM & TF Card Installation 1. Take out the back cover and battery, the card socketswill beshown. 2. Push the SIM card into the socket correctly. Be surethe SIM card is in rightposition. Battery Installation 1. Open the back cover and put the battery into theholder. Install the battery in rightdirection. 2. Put the cover back to theterminal. Warning: The changing of wrong battery type has risk to be explosive. Warning: Don't throw battery casually. Before using the POS terminal, ensure that all the accessories above are included in the package. If you have any problems, please contact the services provider of the distributors.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No Page Count : 2 Author : 刘继元 Comments : Company : Create Date : 2018:02:05 16:27:56+08:27 Creator : WPS Office Modify Date : 2018:02:05 16:27:56+08:27 Producer : Source Modified : D:20180205162756+08'27' Subject : Title : TPS900手持POS终端说明书(英文 通用).cdr Trapped : falseEXIF Metadata provided by EXIF.tools