TelergyHD THD601DC0003 RF Remote Receiver User Manual

TelergyHD BV RF Remote Receiver

User Manual

TelergyHD BV. PRODUCT SPECIFICATION MODEL NAME: THD-AIR1 VERSION HISTORY Ver Changes Description Date Prepared By Checked By Approved By
TelergyHD BV. Page 2 of 11 INDEX 1、Cover---------------------------------------------------------------------------------1 2、Index---------------------------------------------------------------------------------2 3、ID Drawing--- ----------------------------------------------------------------------3 4、Button Introduction ----------------------------------------------------------------5 5、Wireles Range ---------------- --------------------------------------------------- 8 6、 RC Pairing-------------------------------------------------------------------------8 7、Air-mouse ------------------------------------------------------------------------9 8、Full Key Board--------------------------------------------------------------------9 9、Button Code----------------------------------------------------------------------10 10、FCC Statement-------------------------------------------------------------------11
TelergyHD BV. Page 3 of 11 3、 ID Drawing
TelergyHD BV. Page 4 of 11
TelergyHD BV. Page 5 of 11 4、Remote Control Button introduction : Total 44 buttons Item Buttons Type Function Description 01 Power IR Power on/off the target device 02 Mute IR Switch remote to send Mute command to the target 03 Play/Pause IR Play / pause program 04 Stop IR Stop program 05 Fast Forward IR Fast go to next program 06 Fast Backward IR Fast go to last program 07 PLEX IR customize 08 You Tube IR customize 09 NETFLIX IR customize 10 Skype IR customize 11 Mouse on/off RF turn on/off the mouse function 12 Mouse Left RF Mouse’s left button function 13 Mouse Right RF Mouse‘s right button function 14 OK IR Confirms the current selection/mouse left 15 Up IR Move to up 16 Down IR Move to down 17 Left IR Move to left 18 Right IR Move to right 19 Vol + IR Increases the volume of the device 20 Vol - IR Decreases the volume of the device 21 PG+ IR Last page 22 PG- IR next program 23 BACK IR Back to last menu 24 MENU IR Go to homepage
TelergyHD BV. Page 6 of 11 25 Number 1 IR Input number 1 26 Number 2 IR Input number 2 27 Number 3 IR Input number 3 28 Number 4 IR Input number 4 29 Number 5 IR Input number 5 30 Number 6 IR Input number 6 31 Number 7 IR Input number 7 32 Number 8 IR Input number 8 33 Number 9 IR Input number 9 34 Number 0 IR Input number 0 35 SETUP IR Go to setup page 36 EPG IR customize 37 DISP IR customize 38 EXIT IR Exit current page/menu 39 RES IR customize 40 DEL IR customize 41 Red IR Programmable button - links to a page or function in the 42 Green IR Programmable button - links to a page or function in the 43 Yellow IR Programmable button - links to a page or function in the 44 Blue IR Programmable button - links to a page or function in the
TelergyHD BV. Page 7 of 11 5、RF and IR Range The remote control can support a transmission range of 16 meters in direct line-of-sight, 10 meters when not line-of-sight by RF. RF Range IR Range Direct line-of-sight 16m Direct line-of-sight 10m Not line-of-sight 10m Angles IR distance 8m with the angle 15degree 6、 RC Pairing Before operating the remote control, user have to pair the target device with the remote control, the remote should be paired with the target (Usb dongle) as steps below. Pairing Process:  First be sure that the device is power on, then press and hold “1” button and “9” button at the same time .  LED of the remote control will turn on to indicate that it is now in pairing mode.  Remote control will search the target device（USB Dongle）automatically.  Remote control sends pairing request to the device（USB Dongle）.  LED of remote control will blink three times slowly (blink one time each second) if pairing procedure finish successfully.
TelergyHD BV. Page 8 of 11 7、Air-mouse Mode 7.1 、Air-mouse Introduction Two gyros produce the initial delta x and delta y data. This can be accomplished because the gyros measure the amount of angular velocity in their corresponding axis. The pointer follows the user’s motions (no matter what the motion are, circular, horizontal, vertical, fast, slow, etc.). The pointer works smoothly and doesn’t produce any unwanted movements or delays. The pointer can go precisely where the user wants it to. 7.2、Air-mouse Usage 10.2.1 User can press the mouse on/off button to switch between the air mouse mode and the non-air mouse mode. 10.2.2 Air-mouse only can work on the mode of Remote control. 10.2.3 When Air-mouse is turn on and no any action to Remote Control within 30 seconds, the Air mouse will enter the sleeping mode, after that, if you use Remote control again, Air-mouse will wakeup automatically. 8、Full Key Board Full keyboard mode will turn on automatically when user make remote control full keyboard face up ；Full keyboard mode will turn off automatically when user make remote control full keyboard face down.
TelergyHD BV. Page 9 of 11 9、Button Code 9.1 Remote control Button Code
TelergyHD BV. Page 10 of 11 9.2 Full-key board Button Code Basic button code Up button code Remark： A. Button”mouse on/off”no button code。 B. Button “.com” Code：37 06 12 10 C. Button “www” Code：1a 1a 1a
TelergyHD BV. Page 11 of 11 10、FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Navigation menu