TelergyHD THD601DC0003 RF Remote Receiver User Manual

TelergyHD BV RF Remote Receiver

User Manual

Download: TelergyHD THD601DC0003 RF Remote Receiver User Manual
Mirror Download [FCC.gov]TelergyHD THD601DC0003 RF Remote Receiver User Manual
Document ID2309280
Application IDjaIzW9x3WwdTEWpq517kTw==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize32.92kB (411535 bits)
Date Submitted2014-06-27 00:00:00
Date Available2014-06-27 00:00:00
Creation Date2017-10-22 05:31:02
Producing SoftwareGPL Ghostscript 9.18
Document Lastmod2017-10-22 05:31:02
Document TitleMicrosoft Word - THD-AIR1 PRODUCT SPECIFICATION 0610
Document CreatorPScript5.dll Version 5.2.2
Document Author: dell

TelergyHD BV.
PRODUCT SPECIFICATION
MODEL NAME: THD-AIR1
VERSION HISTORY
Ver
Changes Description
Date
Prepared By
Checked By
Approved By
TelergyHD BV.
INDEX
Cover---------------------------------------------------------------------------------1
Index---------------------------------------------------------------------------------2
ID Drawing--- ----------------------------------------------------------------------3
Button Introduction ----------------------------------------------------------------5
Wireles Range ---------------- --------------------------------------------------- 8
RC Pairing-------------------------------------------------------------------------8
Air-mouse ------------------------------------------------------------------------9
Full Key Board--------------------------------------------------------------------9
Button Code----------------------------------------------------------------------10
10、FCC Statement-------------------------------------------------------------------11
Page 2 of 11
TelergyHD BV.
ID Drawing
Page 3 of 11
TelergyHD BV.
Page 4 of 11
TelergyHD BV.
Remote Control Button introduction : Total 44 buttons
Item
Buttons
Type
Function Description
01
Power
IR
Power on/off the target device
02
Mute
IR
Switch remote to send Mute command to the target
03
Play/Pause
IR
Play / pause program
04
Stop
IR
Stop program
05
Fast Forward
IR
Fast go to next program
06
Fast Backward
IR
Fast go to last program
07
PLEX
IR
customize
08
You Tube
IR
customize
09
NETFLIX
IR
customize
10
Skype
IR
customize
11
Mouse on/off
RF
turn on/off the mouse function
12
Mouse Left
RF
Mouse s left button function
13
Mouse Right
RF
Mouse s right button function
14
OK
IR
Confirms the current selection/mouse left
15
Up
IR
Move to up
16
Down
IR
Move to down
17
Left
IR
Move to left
18
Right
IR
Move to right
19
Vol +
IR
Increases the volume of the device
20
Vol -
IR
Decreases the volume of the device
21
PG+
IR
Last page
22
PG-
IR
next program
23
BACK
IR
Back to last menu
24
MENU
IR
Go to homepage
Page 5 of 11
TelergyHD BV.
25
Number 1
IR
Input number 1
26
Number 2
IR
Input number 2
27
Number 3
IR
Input number 3
28
Number 4
IR
Input number 4
29
Number 5
IR
Input number 5
30
Number 6
IR
Input number 6
31
Number 7
IR
Input number 7
32
Number 8
IR
Input number 8
33
Number 9
IR
Input number 9
34
Number 0
IR
Input number 0
35
SETUP
IR
Go to setup page
36
EPG
IR
customize
37
DISP
IR
customize
38
EXIT
IR
Exit current page/menu
39
RES
IR
customize
40
DEL
IR
customize
41
Red
IR
Programmable button - links to a page or function in the
42
Green
IR
Programmable button - links to a page or function in the
43
Yellow
IR
Programmable button - links to a page or function in the
44
Blue
IR
Programmable button - links to a page or function in the
Page 6 of 11
TelergyHD BV.
RF and IR Range
The remote control can support a transmission range of 16 meters
in direct line-of-sight, 10 meters when not line-of-sight by RF.
RF Range
Direct line16m
of-sight
I R Range
Direct lineof-sight
10m
8m with the angle 15degree
Not line-ofsight
10m
Angles I R
distance
RC Pairing
Before operating the remote control, user have to pair the target
device with the remote control, the remote should be paired with the target
(Usb dongle) as steps below.
Pairing Process:
 First be sure that the device is power on, then press and hold “1” button and
“9” button at the same time .
 LED of the remote control will turn on to indicate that it is now in pairing
mode.
 Remote control will search the target device USB Dongle automatically.
 Remote control sends pairing request to the device USB Dongle .
 LED of remote control will blink three times slowly (blink one time each
second) if pairing procedure finish successfully.
Page 7 of 11
TelergyHD BV.
Air-mouse Mode
7.1
Air-mouse Introduction
Two gyros produce the initial delta x and delta y data. This can be
accomplished because the gyros measure the amount of angular velocity in
their corresponding axis.
The pointer follows the user’s motions (no matter what the motion are,
circular, horizontal, vertical, fast, slow, etc.). The pointer works smoothly
and doesn’t produce any unwanted movements or delays. The pointer can go
precisely where the user wants it to.
7.2
Air-mouse Usage
10.2.1 User can press the mouse on/off button to switch
between the air mouse mode and the non-air mouse mode.
10.2.2 Air-mouse only can work on the mode of Remote control.
10.2.3 When Air-mouse is turn on and no any action to Remote
Control within 30 seconds, the Air mouse will enter the sleeping mode,
after that, if you use Remote control again, Air-mouse will wakeup
automatically.
Full Key Board
Full keyboard mode will turn on automatically when user make
remote control full keyboard face up Full keyboard mode will turn off
automatically when user make remote control full keyboard face down.
Page 8 of 11
TelergyHD BV.
Button Code
9.1 Remote control Button Code
Page 9 of 11
TelergyHD BV.
9.2 Full-key board Button Code
Basic button code
Up button code
Remark
A. Button”mouse on/off”no button code
B. Button “.com” Code 37 06 12 10
C. Button “www” Code 1a 1a 1a
Page 10 of 11
TelergyHD BV.
10 FCC STATEMENT
1.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1)
This device may not cause harmful interference, and
(2)
This device must accept any interference received, including interference
that may cause undesired operation.
2.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Page 11 of 11

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : dell
Create Date                     : 2014:06:10 13:57:06+08:00
Modify Date                     : 2014:06:27 09:53:29-07:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2014:06:27 09:53:29-07:00
Format                          : application/pdf
Title                           : Microsoft Word - THD-AIR1 PRODUCT SPECIFICATION   0610
Creator                         : dell
Producer                        : Acrobat Distiller 9.3.3 (Windows)
Document ID                     : uuid:7efd0c27-2522-45f4-8cc5-e368fe1af417
Instance ID                     : uuid:635150de-6e43-4012-a5c5-0c0645d880b2
Page Count                      : 11
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2AA9TTHD601DC0003

Navigation menu