Thomson 2-5831AH 2.4GHz FHSS, Cordless Telephone Handset Caller Id User Manual 25832 DOM IB E 0

Download:
Mirror Download [FCC.gov]
Document ID	523504
Application ID	uIWaDa+o66Zbq994VNdV2g==
Document Description	USERS MANUAL 3
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	139.55kB (1744435 bits)
Date Submitted	2005-03-15 00:00:00
Date Available	2005-03-15 00:00:00
Creation Date	2005-02-25 22:22:01
Producing Software	Acrobat Distiller 6.0.1 for Macintosh
Document Lastmod	2005-02-25 22:22:40
Document Title	25832 DOM IB E 0
Document Creator	PageMaker 7.0

Extra Handset and Recharge Cradle 25832
with Call-Waiting Caller ID for Use with
Models 25831, 25833 and 25835
User’s Guide
•
•
•
•
EQUIPMENT APPROVAL INFORMATION
Your telephone equipment is approved for connection to the Public
Switched Telephone Network and is in compliance with parts 15 and
68, FCC Rules and Regulations and the Technical Requirements for
Telephone Terminal Equipment published by ACTA.
1 Notification to the Local Telephone Company
On the bottom of this equipment is a label indicating, among
other information, the US number and Ringer Equivalence
Number (REN) for the equipment. You must, upon request,
provide this information to your telephone company.
The REN is useful in determining the number of devices you may
connect to your telephone line and still have all of these devices
ring when your telephone number is called. In most (but not all)
areas, the sum of the RENs of all devices connected to one line
should not exceed 5. To be certain of the number of devices you
may connect to your line as determined by the REN, you should
contact your local telephone company.
A plug and jack used to connect this equipment to the premises
wiring and telephone network must comply with the applicable
FCC Part 68 rules and requirements adopted by the ACTA.
A compliant telephone cord and modular plug is provided with
this product. It is designed to be connected to a compatible
modular jack that is also compliant. See installation instructions
for details.
Notes
This equipment may not be used on coin service provided by the
telephone company.
Party lines are subject to state tariffs, and therefore, you may not
be able to use your own telephone equipment if you are on a
party line. Check with your local telephone company.
Notice must be given to the telephone company upon permanent
disconnection of your telephone from your line.
If your home has specially wired alarm equipment connected to
the telephone line, ensure the installation of this product does
not disable your alarm equipment. If you have questions about
what will disable alarm equipment, consult your telephone
company or a qualified installer.
Rights of the Telephone Company
Should your equipment cause trouble on your line which may
harm the telephone network, the telephone company shall,
where practicable, notify you that temporary discontinuance of
service may be required. Where prior notice is not practicable
and the circumstances warrant such action, the telephone
company may temporarily discontinue service immediately. In
case of such temporary discontinuance, the telephone company
must: (1) promptly notify you of such temporary discontinuance;
(2) afford you the opportunity to correct the situation; and (3)
inform you of your right to bring a complaint to the Commission
pursuant to procedures set forth in Subpart E of Part 68, FCC
Rules and Regulations.
The telephone company may make changes in its
communications facilities, equipment, operations or procedures
where such action is required in the operation of its business and
not inconsistent with FCC Rules and Regulations. If these changes
are expected to affect the use or performance of your telephone
equipment, the telephone company must give you adequate
notice, in writing, to allow you to maintain uninterrupted service.
Model 25832
00003413 (Rev. 0 E)
05-08
Printed in China
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference; and (2) This device must accept any
interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna (that is, the antenna
for radio or television that is “receiving” the interference).
• Reorient or relocate and increase the separation between the
telecommunications equipment and receiving antenna.
• Connect the telecommunications equipment into an outlet on a circuit
different from that to which the receiving antenna is connected.
If these measures do not eliminate the interference, please consult
your dealer or an experienced radio/television technician for
additional suggestions. Also, the Federal Communications
Commission has prepared a helpful booklet, “How To Identify and
Resolve Radio/TV Interference Problems.” This booklet is available
from the U.S. Government Printing Office, Washington, D.C. 20402.
Please specify stock number 004-000-00345-4 when ordering copies.
LICENSING
Licensed under US Patent 6,427,009
FCC RF RADIATION EXPOSURE STATEMENT
HEARING AID COMPATIBILITY
This equipment complies with FCC RF radiation exposure limits
set forth for an uncontrolled environment. This equipment should
be installed and operated with a minimum distance of 20
centimeters between the radiator and your body. This transmitter
must not be co-located or operated in conjunction with any other
antenna or transmitter.
This telephone system meets FCC standards for Hearing Aid Compatibility.
For body worn operation, this phone has been tested and meets the
FCC RF exposure guidelines when used with the belt clip supplied
with this product. Use of other accessories may not ensure
compliance with FCC RF exposure guidelines.
CAUTION:
RISK OF ELECTRIC SHOCK
DO NOT OPEN
ATLINKS USA, Inc.
101 West 103rd Street
Indianapolis, IN 46290
© 2005 ATLINKS USA, Inc.
Trademark(s) ® Registered
Marca(s) Registrada(s)
INTERFERENCE INFORMATION
WARNING: TO
PREVENT FIRE OR
ELECTRICAL SHOCK
HAZARD, DO NOT
EXPOSE THIS
PRODUCT TO RAIN
OR MOISTURE.
THE LIGHTNING
FLASH AND ARROW
HEAD WITHIN THE
TRIANGLE IS A
WARNING SIGN
ALERTING YOU OF
“DANGEROUS
VOLTAGE” INSIDE
THE PRODUCT.
CAUTION: TO REDUCE THE
RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR
BACK). NO USER
SERVICEABLE PARTS INSIDE.
REFER SERVICING TO
QUALIFIED SERVICE
PERSONNEL.
THE EXCLAMATION
POINT WITHIN THE
TRIANGLE IS A
WARNING SIGN
ALERTING YOU OF
IMPORTANT
INSTRUCTIONS
ACCOMPANYING
THE PRODUCT.
SEE MARKING ON BOTTOM / BACK OF PRODUCT
INTRODUCTION
CAUTION: When using telephone equipment, there are
basic safety instructions that should always be followed. Refer
to the IMPORTANT SAFETY INSTRUCTIONS provided with
this product and save them for future reference.
Congratulations on purchasing this extra GE cordless handset with Call
Waiting Caller ID. This telephone has been designed to be simple to
use, however, you can reach its full potential more quickly by taking a
few minutes to read this instruction book. This telephone is a
multifunction product for use with Call Waiting and Caller ID services
available from your local telephone company.
• know who called while you are on the other line or when you
were away.
• screen unwanted calls, eliminate harassment from annoying
calls, or to get prepared before answering a call.
PARTS CHECKLIST
Make sure your package includes the items shown here.
IMPORTANT: Because cordless phones operate on electricity,
you should have at least one phone in your home that isn’t
cordless, in case the power in your home goes out.
IMPORTANT: In order to use all of the features of this
telephone, you must subscribe to two separate services available
from your local telephone company: the standard Name/
Number Caller ID Service to know who is calling when the
phone rings and Call Waiting Caller ID Service to know who is
calling while you are on the phone.
INSTALLATION NOTE: Some cordless telephones operate at
frequencies that may cause or receive interference with nearby
TVs, microwave ovens, and VCRs. To minimize or prevent such
interference, the base of the cordless telephone should not be
placed near or on top of a TV, microwave ovens, or VCR. If such
interference continues, move the cordless telephone farther away
from these appliances. Certain other communications devices may
also use the 2.4/5.8 GHz frequency for communication, and, if not
properly set, these devices may interfere with each other and/or
your new telephone. Typical devices that may use the 2.4/5.8 GHz
frequency for communication include wireless audio/video senders,
wireless computer networks, multi-handset cordless telephone
systems, and some long-range cordless telephone systems.
HANDSET AND CHARGE CRADLE LAYOUT
Display
CALLER ID/VOL - /+
(caller ID/volume button)
TALK/CALLLBACK
(button)
Headset Jack
SPEAKER (button)
DELETE (button)
CONF/FORMAT
(conference/format button)
*EXIT (button)
#PAUSE/RINGER
(button)
REDIAL (button)
MEMORY (button)
INT
(intercom button)
FLASH (button)
MUTE/PROG
(mute/program button)
5. Close the battery compartment by pushing the door up until it
snaps into place.
6. Place the handset in the charging cradle. The charge indicator
turns on to indicate the battery is charging.
7. Allow the handset to charge for 16 hours prior to registration to
GE Models 25831, 25833, or 25835. If you don't properly charge
the phone, battery performance is compromised.
BATTERY
BLACK WIRE
Handset
Belt
Clip
Battery
compartment
cover
Handset battery Handset charge cradle
pack
INSTALLING THE PHONE
IMPORTANT: Make sure the extra handset is registered
to GE Models 25831, 25833, or 25835 before use. Refer
to the GE 25831, 25833, or 25835 instruction book for
detailed installation and operation information.
• Never install telephone wiring during a lightning storm.
• Never install telephone jacks in wet locations unless the jack is
specifically designed for wet locations.
• Never touch non-insulated telephone wires or terminals, unless the
telephone line has been disconnected at the network interface.
• Use caution when installing or modifying telephone lines.
• Temporarily disconnect any equipment connected to the phone
such as faxes, other phones, or modems.
IMPORTANT INSTALLATION GUIDELINES
• Install telephone near an electrical power outlet.
• Avoid sources of noise, such as a window by a busy street, and
electrical noise, such as motors, microwave ovens, and
fluorescent lighting.
• Avoid heat sources, such as heating air ducts, heating appliances,
radiators, and direct sunlight.
• Avoid areas of excessive moisture or extremely low temperature.
• Avoid dusty locations.
• Avoid other cordless telephones or personal computers.
1. Plug the charge cradle power adaptor into an electrical outlet.
2. Install the handset battery.
INSTALLING THE HANDSET BATTERY
PRESS DOWN
FIRMLY
RED WIRE
NOTE: If the battery is not properly installed in the handset, or
if the battery pack is not properly connected to the jack inside
the battery compartment. "NO BATTERY" shows in the display
when the handset is placed in the charging cradle.
IMPORTANT: After you place the handset in the cradle the
display shows "CHARGING...", then, "SEARCHING...", then
"HANDSET NEEDS REGISTRATION" alternately. Wait until the
handset charges properly, then register the handset to the base as
described below.
PROGRAMMING THE TELEPHONE
NOTE: The 25832 accessory handset is equipped with only basic
features and does not have any answering features even when
registered to Model 25833.
HANDSET REGISTRATION
Registration links the base to a cordless handset. Once a handset is
registered it can use the base’s phone connection. A cordless
handset will not operate until it is registered to the base. During the
registration process, keep the handset near the base.
NOTE: This extra handset is only compatible with the GE
Models 25831, 25833, or 25835 series.
1. Locate battery and battery door which are packaged together
inside a plastic bag and are separate from the handset.
2. Locate the battery compartment on the back of the handset.
3. Plug the battery pack cord into the jack inside the compartment.
HANDSET NAME
3. The handset number (1 to 4) is assigned. You may also give the
handset a specific identifying name.
HANDSET NAME
1. Use the touch-tone keypad to enter the name (up to 15 characters).
More than one letter is stored in each of the number keys. For
example, to enter the name Bill Smith, press the 2 key twice for
the letter B. Briefly pause and the cursor moves to the next field.
Press the 4 key 3 times for the letter I. Briefly pause and the cursor
moves to the next field. Press the 5 key 3 times for the second
letter L. Briefly pause and the cursor moves to the next field. Press
the 5 key 3 times for the second letter L, press 1 key to add a
space between the first and last name. Press the 7 key 4 times for
the letter S. Briefly pause and the cursor moves to the next field.
Press the 6 key once for the letter M. Briefly pause and the cursor
moves to the next field. Press the 4 key 3 times for the letter I.
Briefly pause and the cursor moves to the next field. Press the 8
key for the letter T. Briefly pause and the cursor moves to the next
field. Press the 4 key twice for the letter H.
NOTE: If you make a mistake press the DELETE button to
backspace and erase the wrong character(s).
NOTE: Press MUTE/PROG button once to skip this step and
exit to standby screen.
2. Press the MUTE/PROG button to save. You will hear a
confirmation tone, and the display returns to the main menu.
HANDSET DE-REGISTRATION
HANDSET NEEDS
REGISTRATION
1. Press the MUTE/PROG button and HOLD BASE PAGE WAIT FOR
BEEP shows in the display.
HOLD BASE PAGE
WAIT FOR BEEP
4. Insert the battery pack.
charge indicator
HANDSET #
REGISTERED
When your handset displays:
NOTE: You must connect the handset battery before use.
NOTE: It is important to maintain the polarity (black and red wires)
to the jack inside the compartment. To ensure proper battery
installation, the connector is keyed and can be inserted only one way.
Your Call Waiting Caller ID phone allows you to:
• view the name and telephone number of a caller while you are on
the phone (Call Waiting Caller ID).
• identify callers before you answer the phone.
• view the time and date of each incoming call.
• record up to 40 Caller ID messages sequentially in each handset.
BEFORE YOU BEGIN
2. Press and hold the PAGE button on the base of Models 25831,
25833, or 25835 until you hear a long beep. The handset displays
HANDSET # REGISTERED followed by HANDSET NAME.
Deregistration cancels a handset’s registration. If you do not know a
handset’s name, you should deregister the handset according to the
steps below. During the de-registration process, keep the handset
near the base.
WARNING: It is not recommended that a handset be deregistered unless absolutely necessary because once a
handset is de-registered, that handset's telephone features
cannot be used until the handset is re-registered.
1. Make sure your handset is OFF (not in talk mode).
2. Press the MUTE/PROG button to display main menus: ROOM
MONITOR and HANDSET SETUP.
3. Use CALLER ID/VOL - button to locate to HANDSET SETUP and
then press MUTE/PROG button to select.
4. Use CALLER ID/VOL - / + button to locate the DEREGISTRATION
and then press MUTE/PROG button to select.
5. Then, handset shows DEREGISTRATION 1YES 2NO in the display.
Extra Handset and Recharge Cradle 25832
with Call-Waiting Caller ID for Use with
Models 25831, 25833 and 25835
User’s Guide
•
•
•
•
EQUIPMENT APPROVAL INFORMATION
Your telephone equipment is approved for connection to the Public
Switched Telephone Network and is in compliance with parts 15 and
68, FCC Rules and Regulations and the Technical Requirements for
Telephone Terminal Equipment published by ACTA.
1 Notification to the Local Telephone Company
On the bottom of this equipment is a label indicating, among
other information, the US number and Ringer Equivalence
Number (REN) for the equipment. You must, upon request,
provide this information to your telephone company.
The REN is useful in determining the number of devices you may
connect to your telephone line and still have all of these devices
ring when your telephone number is called. In most (but not all)
areas, the sum of the RENs of all devices connected to one line
should not exceed 5. To be certain of the number of devices you
may connect to your line as determined by the REN, you should
contact your local telephone company.
A plug and jack used to connect this equipment to the premises
wiring and telephone network must comply with the applicable
FCC Part 68 rules and requirements adopted by the ACTA.
A compliant telephone cord and modular plug is provided with
this product. It is designed to be connected to a compatible
modular jack that is also compliant. See installation instructions
for details.
Notes
This equipment may not be used on coin service provided by the
telephone company.
Party lines are subject to state tariffs, and therefore, you may not
be able to use your own telephone equipment if you are on a
party line. Check with your local telephone company.
Notice must be given to the telephone company upon permanent
disconnection of your telephone from your line.
If your home has specially wired alarm equipment connected to
the telephone line, ensure the installation of this product does
not disable your alarm equipment. If you have questions about
what will disable alarm equipment, consult your telephone
company or a qualified installer.
Rights of the Telephone Company
Should your equipment cause trouble on your line which may
harm the telephone network, the telephone company shall,
where practicable, notify you that temporary discontinuance of
service may be required. Where prior notice is not practicable
and the circumstances warrant such action, the telephone
company may temporarily discontinue service immediately. In
case of such temporary discontinuance, the telephone company
must: (1) promptly notify you of such temporary discontinuance;
(2) afford you the opportunity to correct the situation; and (3)
inform you of your right to bring a complaint to the Commission
pursuant to procedures set forth in Subpart E of Part 68, FCC
Rules and Regulations.
The telephone company may make changes in its
communications facilities, equipment, operations or procedures
where such action is required in the operation of its business and
not inconsistent with FCC Rules and Regulations. If these changes
are expected to affect the use or performance of your telephone
equipment, the telephone company must give you adequate
notice, in writing, to allow you to maintain uninterrupted service.
Model 25832
00003413 (Rev. 0 E)
05-08
Printed in China
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference; and (2) This device must accept any
interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna (that is, the antenna
for radio or television that is “receiving” the interference).
• Reorient or relocate and increase the separation between the
telecommunications equipment and receiving antenna.
• Connect the telecommunications equipment into an outlet on a circuit
different from that to which the receiving antenna is connected.
If these measures do not eliminate the interference, please consult
your dealer or an experienced radio/television technician for
additional suggestions. Also, the Federal Communications
Commission has prepared a helpful booklet, “How To Identify and
Resolve Radio/TV Interference Problems.” This booklet is available
from the U.S. Government Printing Office, Washington, D.C. 20402.
Please specify stock number 004-000-00345-4 when ordering copies.
LICENSING
Licensed under US Patent 6,427,009
FCC RF RADIATION EXPOSURE STATEMENT
HEARING AID COMPATIBILITY
This equipment complies with FCC RF radiation exposure limits
set forth for an uncontrolled environment. This equipment should
be installed and operated with a minimum distance of 20
centimeters between the radiator and your body. This transmitter
must not be co-located or operated in conjunction with any other
antenna or transmitter.
This telephone system meets FCC standards for Hearing Aid Compatibility.
For body worn operation, this phone has been tested and meets the
FCC RF exposure guidelines when used with the belt clip supplied
with this product. Use of other accessories may not ensure
compliance with FCC RF exposure guidelines.
CAUTION:
RISK OF ELECTRIC SHOCK
DO NOT OPEN
ATLINKS USA, Inc.
101 West 103rd Street
Indianapolis, IN 46290
© 2005 ATLINKS USA, Inc.
Trademark(s) ® Registered
Marca(s) Registrada(s)
INTERFERENCE INFORMATION
WARNING: TO
PREVENT FIRE OR
ELECTRICAL SHOCK
HAZARD, DO NOT
EXPOSE THIS
PRODUCT TO RAIN
OR MOISTURE.
THE LIGHTNING
FLASH AND ARROW
HEAD WITHIN THE
TRIANGLE IS A
WARNING SIGN
ALERTING YOU OF
“DANGEROUS
VOLTAGE” INSIDE
THE PRODUCT.
CAUTION: TO REDUCE THE
RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR
BACK). NO USER
SERVICEABLE PARTS INSIDE.
REFER SERVICING TO
QUALIFIED SERVICE
PERSONNEL.
THE EXCLAMATION
POINT WITHIN THE
TRIANGLE IS A
WARNING SIGN
ALERTING YOU OF
IMPORTANT
INSTRUCTIONS
ACCOMPANYING
THE PRODUCT.
SEE MARKING ON BOTTOM / BACK OF PRODUCT
INTRODUCTION
CAUTION: When using telephone equipment, there are
basic safety instructions that should always be followed. Refer
to the IMPORTANT SAFETY INSTRUCTIONS provided with
this product and save them for future reference.
Congratulations on purchasing this extra GE cordless handset with Call
Waiting Caller ID. This telephone has been designed to be simple to
use, however, you can reach its full potential more quickly by taking a
few minutes to read this instruction book. This telephone is a
multifunction product for use with Call Waiting and Caller ID services
available from your local telephone company.
• know who called while you are on the other line or when you
were away.
• screen unwanted calls, eliminate harassment from annoying
calls, or to get prepared before answering a call.
PARTS CHECKLIST
Make sure your package includes the items shown here.
IMPORTANT: Because cordless phones operate on electricity,
you should have at least one phone in your home that isn’t
cordless, in case the power in your home goes out.
IMPORTANT: In order to use all of the features of this
telephone, you must subscribe to two separate services available
from your local telephone company: the standard Name/
Number Caller ID Service to know who is calling when the
phone rings and Call Waiting Caller ID Service to know who is
calling while you are on the phone.
INSTALLATION NOTE: Some cordless telephones operate at
frequencies that may cause or receive interference with nearby
TVs, microwave ovens, and VCRs. To minimize or prevent such
interference, the base of the cordless telephone should not be
placed near or on top of a TV, microwave ovens, or VCR. If such
interference continues, move the cordless telephone farther away
from these appliances. Certain other communications devices may
also use the 2.4/5.8 GHz frequency for communication, and, if not
properly set, these devices may interfere with each other and/or
your new telephone. Typical devices that may use the 2.4/5.8 GHz
frequency for communication include wireless audio/video senders,
wireless computer networks, multi-handset cordless telephone
systems, and some long-range cordless telephone systems.
HANDSET AND CHARGE CRADLE LAYOUT
Display
CALLER ID/VOL - /+
(caller ID/volume button)
TALK/CALLLBACK
(button)
Headset Jack
SPEAKER (button)
DELETE (button)
CONF/FORMAT
(conference/format button)
*EXIT (button)
#PAUSE/RINGER
(button)
REDIAL (button)
MEMORY (button)
INT
(intercom button)
FLASH (button)
MUTE/PROG
(mute/program button)
5. Close the battery compartment by pushing the door up until it
snaps into place.
6. Place the handset in the charging cradle. The charge indicator
turns on to indicate the battery is charging.
7. Allow the handset to charge for 16 hours prior to registration to
GE Models 25831, 25833, or 25835. If you don't properly charge
the phone, battery performance is compromised.
BATTERY
BLACK WIRE
Handset
Belt
Clip
Battery
compartment
cover
Handset battery Handset charge cradle
pack
INSTALLING THE PHONE
IMPORTANT: Make sure the extra handset is registered
to GE Models 25831, 25833, or 25835 before use. Refer
to the GE 25831, 25833, or 25835 instruction book for
detailed installation and operation information.
• Never install telephone wiring during a lightning storm.
• Never install telephone jacks in wet locations unless the jack is
specifically designed for wet locations.
• Never touch non-insulated telephone wires or terminals, unless the
telephone line has been disconnected at the network interface.
• Use caution when installing or modifying telephone lines.
• Temporarily disconnect any equipment connected to the phone
such as faxes, other phones, or modems.
IMPORTANT INSTALLATION GUIDELINES
• Install telephone near an electrical power outlet.
• Avoid sources of noise, such as a window by a busy street, and
electrical noise, such as motors, microwave ovens, and
fluorescent lighting.
• Avoid heat sources, such as heating air ducts, heating appliances,
radiators, and direct sunlight.
• Avoid areas of excessive moisture or extremely low temperature.
• Avoid dusty locations.
• Avoid other cordless telephones or personal computers.
1. Plug the charge cradle power adaptor into an electrical outlet.
2. Install the handset battery.
INSTALLING THE HANDSET BATTERY
PRESS DOWN
FIRMLY
RED WIRE
NOTE: If the battery is not properly installed in the handset, or
if the battery pack is not properly connected to the jack inside
the battery compartment. "NO BATTERY" shows in the display
when the handset is placed in the charging cradle.
IMPORTANT: After you place the handset in the cradle the
display shows "CHARGING...", then, "SEARCHING...", then
"HANDSET NEEDS REGISTRATION" alternately. Wait until the
handset charges properly, then register the handset to the base as
described below.
PROGRAMMING THE TELEPHONE
NOTE: The 25832 accessory handset is equipped with only basic
features and does not have any answering features even when
registered to Model 25833.
HANDSET REGISTRATION
Registration links the base to a cordless handset. Once a handset is
registered it can use the base’s phone connection. A cordless
handset will not operate until it is registered to the base. During the
registration process, keep the handset near the base.
NOTE: This extra handset is only compatible with the GE
Models 25831, 25833, or 25835 series.
1. Locate battery and battery door which are packaged together
inside a plastic bag and are separate from the handset.
2. Locate the battery compartment on the back of the handset.
3. Plug the battery pack cord into the jack inside the compartment.
HANDSET NAME
3. The handset number (1 to 4) is assigned. You may also give the
handset a specific identifying name.
HANDSET NAME
1. Use the touch-tone keypad to enter the name (up to 15 characters).
More than one letter is stored in each of the number keys. For
example, to enter the name Bill Smith, press the 2 key twice for
the letter B. Briefly pause and the cursor moves to the next field.
Press the 4 key 3 times for the letter I. Briefly pause and the cursor
moves to the next field. Press the 5 key 3 times for the second
letter L. Briefly pause and the cursor moves to the next field. Press
the 5 key 3 times for the second letter L, press 1 key to add a
space between the first and last name. Press the 7 key 4 times for
the letter S. Briefly pause and the cursor moves to the next field.
Press the 6 key once for the letter M. Briefly pause and the cursor
moves to the next field. Press the 4 key 3 times for the letter I.
Briefly pause and the cursor moves to the next field. Press the 8
key for the letter T. Briefly pause and the cursor moves to the next
field. Press the 4 key twice for the letter H.
NOTE: If you make a mistake press the DELETE button to
backspace and erase the wrong character(s).
NOTE: Press MUTE/PROG button once to skip this step and
exit to standby screen.
2. Press the MUTE/PROG button to save. You will hear a
confirmation tone, and the display returns to the main menu.
HANDSET DE-REGISTRATION
HANDSET NEEDS
REGISTRATION
1. Press the MUTE/PROG button and HOLD BASE PAGE WAIT FOR
BEEP shows in the display.
HOLD BASE PAGE
WAIT FOR BEEP
4. Insert the battery pack.
charge indicator
HANDSET #
REGISTERED
When your handset displays:
NOTE: You must connect the handset battery before use.
NOTE: It is important to maintain the polarity (black and red wires)
to the jack inside the compartment. To ensure proper battery
installation, the connector is keyed and can be inserted only one way.
Your Call Waiting Caller ID phone allows you to:
• view the name and telephone number of a caller while you are on
the phone (Call Waiting Caller ID).
• identify callers before you answer the phone.
• view the time and date of each incoming call.
• record up to 40 Caller ID messages sequentially in each handset.
BEFORE YOU BEGIN
2. Press and hold the PAGE button on the base of Models 25831,
25833, or 25835 until you hear a long beep. The handset displays
HANDSET # REGISTERED followed by HANDSET NAME.
Deregistration cancels a handset’s registration. If you do not know a
handset’s name, you should deregister the handset according to the
steps below. During the de-registration process, keep the handset
near the base.
WARNING: It is not recommended that a handset be deregistered unless absolutely necessary because once a
handset is de-registered, that handset's telephone features
cannot be used until the handset is re-registered.
1. Make sure your handset is OFF (not in talk mode).
2. Press the MUTE/PROG button to display main menus: ROOM
MONITOR and HANDSET SETUP.
3. Use CALLER ID/VOL - button to locate to HANDSET SETUP and
then press MUTE/PROG button to select.
4. Use CALLER ID/VOL - / + button to locate the DEREGISTRATION
and then press MUTE/PROG button to select.
5. Then, handset shows DEREGISTRATION 1YES 2NO in the display.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2005:02:25 22:22:40+08:00
Create Date                     : 2005:02:25 22:22:01+08:00
Title                           : 25832 DOM IB E 0
Author                          : 
Creator                         : PageMaker 7.0
Producer                        : Acrobat Distiller 6.0.1 for Macintosh
Page Count                      : 2
Mod Date                        : 2005:02:25 22:22:40+08:00
Creation Date                   : 2005:02:25 22:22:01+08:00
Metadata Date                   : 2005:02:25 22:22:40+08:00
Has XFA                         : No

EXIF Metadata provided by EXIF.tools