Three In One TIO-W355558100 Wireless Video Scope User Manual 01

Download:
Mirror Download [FCC.gov]
Document ID	1284935
Application ID	RK7f+4M4H8OFRw5TrKQ9GQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	347.51kB (4343822 bits)
Date Submitted	2010-05-21 00:00:00
Date Available	2010-05-21 00:00:00
Creation Date	2010-05-04 16:42:06
Producing Software	Adobe PDF library 8.00
Document Lastmod	2010-05-11 17:16:51
Document Title	01
Document Creator	Adobe Illustrator CS3

Video Scope User Manual
For Model：TIO-W3558100
Table of contents
Safety recommendations ..............................................................................3
1. Description................................................................................................4
2. Preparation for use ...................................................................................5
3. Menu set up ..............................................................................................6
4. Digital Zoom................................ ..............................................................8
5. LED Adjustment................................ ........................................................9
6. Mirror / Reflecting Object Surface.................................. ...........................9
7. Snapshot and Recording functions................................ ..........................10
8. Surfing mode............................................................................................10
9. Transferring Photos and Videos to a PC..................................................11
10. Troubleshooting......................................................................................11
11. Technical data. .......................................................................................11
12. Spares & accessories.............................................................................13
VIDEO SCOPE
Safety recommendations
Warning
• Do not modify or disassemble the unit.
• Do not use this item in explosive atmospheres.
Caution
• Keep the device out of the reach of children.
• Do not look directly into the objective lens at the end of the insertion
tube, your eyesight may be seriously damaged.
• Do not forcibly bend, twist or elongate the insertion tube.
• Strong impact on the device may result in the breakage of the objective
lens (made of glass) at the tip of the insertion tube.
• Do not use or store the device at a temperature higher than 60 °C or
lower than -20 °C.
• Don’t use the device in the direct sunshine.
• Store the device in a dry and adequately ventilated environment.
• Keep the device away from acid or alkaline solutions, oil or petrol, and do
not use it in an atmosphere containing their vapours.
• Do not remove the SD Memory Card while data is being saved to the
card. This may cause the data to be lost or the card to be damaged.
Warming:
Changes or modifications are not expressly approved by the manufacturer
could void the user's authority to operate the equipment
VIDEO SCOPE
1. Description
This wireless Video Scope is a compact handheld instrument that allows the user to view
applications in restricted spaces that could not normally be seen with the naked eye.
This wireless Video Scope is supplied in a sturdy carrying case and consists of a display unit,
insertion ube, main adapter and side view adapter. The display unit, with a 3,5” wide angle
TFT LCD screen, has the capacity of viewing, storing and reviewing photos and video images.
Images can also be displayed directly on a TV screen or stored and transferred to a PC
for viewing later. The display unit is powered by rechargeable Li-polymer batteries and a
multi-voltage charger is included. The 1 meter (3,3 ft) insertion tube has a tip of just
5,5 mm (0.22 in) and is equipped with powerful variable LED lighting. Other lengths are
available, see section 12. Spares & accessories.
Wireless Inspection System Introduction and Applications
Wireless Inspection System is an outstanding feature of Video Scope. The wireless inspection
camera lets you see a clear image of problems in hard to reach locations without the cable.
The image can be sent to main unit up to 50 m (160') away. With the palm-sized probe handle
you can inspect many applications. Video Scope includes wireless and direct input modes.
You can choose the appropriate mode to meet your needs in different working applications.
You can hold the wireless probe handle at a perfect height when checking somewhere
unreachable and narrow、dark space. In some special working environments you may need
a free hand to remove an obstacle during inspection. Simply place the main unit on a stable
platform and manipulate the probe with a single hand. Besides, we can have a long time
inspection away from the target observed with Wireless Inspection System if the probe handle
is set up fixed.
Parts and function
Rec
Eec
OK
A.
B.
C.
D.
E.
F.
POWER button
DOWN button
Escape
Mirror Image and Rotate
LED brightness decrease
PHOTO button
G.
H.
I.
J.
Zoom out
LED brightness increase
Insertion tube
OK button
K. UP button
L. Display unit
M.
N.
O.
P.
Q.
R.
REC button
Zoom in
SD slot
DC-in
Video Out
USB Port
VIDEO SCOPE
Wireless Inspection Device Parts and Function
Power Indicator LED
LED brightness increase
Battery charge
indicator LED
Insertion tube
Connector
Power ON/OFF
botton
Battery charger
connector
LED brightness decrease
2. Preparation for use
On first use it is important that the
SD card is inserted as Fig.1 shown.
Rec
Eec
OK
Fig.1
Connect the insertion tube to the display
unit as shown in the figure and tighten
the locking collar:Fig.2
Fig.2
Press the POWER button for 3-5
seconds to turn the display unit on.
The Start-up screen is shown briefly
followed by the status screen for five
seconds.Fig.3
Fig.3
The status screen shows the capacity of the SD card and the internal battery.
If the Video Scope has been stored for a long time then the display might not able to turn on.
The most likely cause is that the battery has run out.Please use power adapter to re-charge
the battery.
VIDEO SCOPE
Directly on the screen, a “live” picture can be seen. This is the camera mode.
It is strongly advised to properly set-up the Video Scope before first use. The indexing of
saved photos and video is based on date and time only. Other parameters, if set before
first use, can make the operation of the Video Scope easier in the future.
Press POWER button for 3-5 seconds to turn the display unit off.
The side view adapter included, is ideal for viewing pipe walls.
To fit the side view adapter, unscrew the chrome tip of the insertion tube and replace with
the side view adapter.
3. Menu set up
• Switch the unit on. Ensure that camera mode is active (i.e. a “live” picture can be seen)
• Press the OK button to access the menus. Use the UP or DOWN button to select the
menu item. Press OK to confirm.
The options displayed are as follows;
- Delete all
- Video output
- Date / time setup
- Language
- Video format
- Auto power off
- Input Source
Delete All
Take care in selecting this option, as everything will be deleted from the SD card!
Navigate to DELETE ALL in the menu, press the OK button. Select YES or NO using the
UP or DOWN buttons. Confirm with the OK button.
Video Output
This function allows live pictures or recorded photos and videos to be displayed on a
TV screen or beamer. First make sure that the Video format is set correctly to the used
TV system (PAL or NTSC). (See the Menu set up section.)
Connect the scope video cable to the display unit TV out jack. Ensure that the other end of
the video cable is well connected to the TV or beamer.
Press the OK button to select menu options, select Video Output and press the OK button.
The scope unit screen will turn black and the display will be shown on the TV. You can
transfer the screen back to the display unit by selecting the same function.
VIDEO SCOPE
Date/Time Set up
Press UP button & DOWN button to select year/month/day or hour/minute/second. Press
PHOTO button to increase the value and the REC button to decrease the value.
The date and time can be displayed in the preview image mode. Use either the PHOTO or
REC button to toggle between display “ON” and “OFF”:
MENU
Confirm selection and exit menu by pressing OK.
Language
Navigate to LANGUAGE in the menu, press the OK button. Select the required language
using the UP or DOWN buttons and confirm with the OK button.
MENU
Video Format
Navigate to VIDEO FORMAT in the menu, press the OK button. Select the required video
format (NTSC or PAL) using the UP or DOWN buttons. Confirm with the OK button.
Auto Power Off
Navigate to AUTO POWER OFF in the menu, press the OK button. Select the required
auto power off time (5, 10, 15, 30 minutes or Disable) using the UP or DOWN buttons.
Confirm with the OK button.
MENU
AUTO OFF
Wireless Inspection Device Operation
In the Menu page, press the OK button while
the INPUT SOURCE slot is selected.
MENU
DATE/TIME SETUP
LANGUAGE
VIDEO FORMAT
AUTO POWER OFF
INPUT SOURCE
VIDEO SCOPE
Press the OK button while the WIRELESS
slot is selected.
INPUT SOURCE
DIRECT
WIRELESS
Connect the insertion tube to the wireless handle unit as shown in the figure and tighten the
locking collar.
Press the POWER button
of the
wireless handle unit to start the wireless
inspection.
Press the
button of the wireless
handle unit to adjust the insertion cable LED
brightness.
4. Digital Zoom
The picture in preview mode could be magnificated by the user as themselves wish.
The zoom ratio is two times. Press Zoom in button and Zoom out button to select ratio from
1.0 to 2.0 divided by each 0.1 difference.
VIDEO SCOPE
5. LED Adjustment
This function is designed for user adjusting the brightness of LED to choose
a suitable illumination condition for different environment. The button
is for increasing brightness and
is for decreasing brightness.
Note:Adjust the insertion cable LED brightness with
and
button
of the wireless handle unit during Wireless Inspection System operation.
6. Mirror / Reflecting Object Surface
The Wireless Video Scope have the mirror image function. When you press the
button,
you can get a mirrored image to original image. The phenomenon is shown as follows:
button first time:
Press
button second time:
Press
Press
button third time:
VIDEO SCOPE
7. Snapshot and Recording functions
Snapshot
In preview mode, press the PHOTO button to take a photo.
The photo is stored to the SD card in jpg format with a file name of running number. For
example IMG00001.jpg.
Users can capture the picture that they wanted during the video playing and recording by
pressing the PHOTO bottom
Recording
In preview mode, press the REC button to take a video. The video icon is shown in the
top right corner.
To stop recording, press the REC button again. The video icon disappears. The display
reverts to preview mode.
The video is automatically stored to the SD card in avi format with a file name of running
number.
For example IMG00002.avi.
8. Surfing mode
In the preview mode, press the UP or DOWN key, the last photo or video will be displayed.
Press the UP or DOWN keys to navigate to the photo or video to be viewed.
To play the video, press the REC button. Press the REC button again to pause, and adjust
the video volume by pressing
button.
To revert to preview mode, press the ESC button
To delete a saved photo, press the OK button whilst it is displayed. To delete a saved video,
make sure the video is not in play mode, press the OK button. A delete menu will show.
Toggle between the Yes and No options using the UP and DOWN buttons. Press the OK
button to confirm.
10
VIDEO SCOPE
9. Transferring Photos and Videos to a PC
The computer must be running MS WindowsTM 2000 or later.
Turn the Video scope on. Connect the USB cable to the scope unit and the computer.
Look for the drive with the SD card files, this should look similar to the following figure:
IMG00001.JPG
DCIM
IMG00002.AVI
100DSCIM
The files can then transferred and viewed on the PC. In general, on a PC running MS
WindowsTM 2000 or later with WindowsTM Media player, no special software is required
to display JPG and AVI files.
10. Troubleshooting
No image on the display after turning the power on:
Battery is exhausted. Connect the scope unit to the power adapter supplied and recharge
batteries. The Video scope can be used when connected to ac power.
No image, only words on the LCD monitor after turning the power on:
Check that the insertion tube is correctly connected to the display unit.
Unable to take photos or record video:
SD card not present, wrongly inserted, full or faulty. Check SD card is present, check SD
card insertion, check SD capacity, check if SD card is faulty (check if SD card works in
other devices).
Shut down:
When all functions freeze or fail, insert an insulated needle into the hole on the back of
the main unit. The system will restart automatically.
Back
Back
RESET
Battery
Battery
11. Technical data
Insertion Tube & Light Source
Image Sensor
Resolution (Dynamic / Static)
Size Tip (Insertion Tube ) Diameter
VIDEO SCOPE
CMOS Image Sensor
320 (H) X 240 (V) / 640 (H) X 480 (V)
5.5 mm / 4.0 mm(optional)
11
Tube length
Field of View (FOV)
Depth of View (DOV)
Light Source
Probe Working Temperature
Ingress Protection
1 M & Up
54 º / 56 º
1.5 cm - 5 cm (OD 5.5mm/OD 4.0mm)
4 LEDs (OD 5.5mm/OD 4.0mm)
-20 to 60 °C (OD 5.5mm/OD 4.0mm)
IP57 (OD 5.5mm/OD 4.0mm)
Display Unit
Power
DC5V
Display
3.5” TFT LCD Monitor 320 X 240 Pixels
Interface
Battery (not user serviceable)
Mini USB 1.1/ AV out
Rechargeable Li-Polymer Battery (3.7V)
Power adapter
100 - 240V AC in / 5.5V DC out.
Video Out Format
NTSC & PAL
Recording medium
SD card
Compression Format
Still Image Storage Format
MPEG4
JPEG (640 X 480)
Video Recording Format
AVI (640 X 480)
Working & Storage/Battery charging
temperature range
-20 °C to 60 °C /0 to 40 °C
Functions
Snapshot, Video recording, Picture & video
review on LCD screen, TV Out, transfer of
picture & video from SD card to PC
Digital Zoom, Reflecting, Wireless
Insplection System
Wireless Inspection System
Transmitter
Type
RF 2.4GH
Data
Video/Audio
Video System
NTSC/PAL
Audio type
Stereo
Operation temperature
-10~60°C
Storage temperature
-40~80°C
12
VIDEO SCOPE
Receiver
Type
RF 2.4GH
Sensitivity:
-87dBm(SNR=42dB, Fmod=15kHz)
Data
Video/Audio
Video System
NTSC/PAL
Audio type
Stereo
Operation temperature
-10~60°C
Storage temperature
-40~80°C
12. Spares & accessories(Optional)
（1）90 ° side view camera tube
（8）1 meter tube
（2）Gooseneck tube
（9）2 meter tube
（3）70 ° mirror adapter
（9）3 meter tube
（4）90 ° mirror adapter
（9）5 meter tube
（5）110 ° mirror adapter
（10）10 meter tube
（6）Magnet
（11）20 meter tube
（7）Guide Ball
（12）30 meter tube
For more information, please contact your dealer.
VIDEO SCOPE
13

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-701
Modify Date                     : 2010:05:11 17:16:51+08:00
Create Date                     : 2010:05:04 16:42:06+08:00
Metadata Date                   : 2010:05:11 17:16:51+08:00
Creator Tool                    : Adobe Illustrator CS3
Format                          : application/pdf
Title                           : 01
Document ID                     : uuid:0a4f3123-f823-4590-9e26-cd38767461d9
Instance ID                     : uuid:fb9f6862-b63e-4822-a608-4ab359d50d41
Producer                        : Adobe PDF library 8.00
Has XFA                         : No
Page Count                      : 13
Creator                         : Adobe Illustrator CS3

EXIF Metadata provided by EXIF.tools