Tong Lung Metal Industry PL2-BT Electronic BLE Deadbolt User Manual Manual
Tong Lung Metal Industry Co.,Ltd. Electronic BLE Deadbolt Manual
Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 4026751 |
| Application ID | 88141lrnK03IFwmIGH58WQ== |
| Document Description | Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 127.94kB (1599311 bits) |
| Date Submitted | 2018-10-02 00:00:00 |
| Date Available | 2018-10-12 00:00:00 |
| Creation Date | 2018-10-01 17:31:16 |
| Producing Software | Corel PDF Engine Version 15.2.0.686 |
| Document Lastmod | 2018-10-01 17:31:16 |
| Document Title | Manual |
| Document Creator | CorelDRAW X5 |
| Document Author: | Kai Hsu_許世凱 |
Brand: EZSET Model: PL2-BT Electronic BLE Touch Deadbolt Please download “BLE Smart Lock” on Google Play or Lock / Unlock With Paired Mobile Phone Pairing With Bluetooth Lock Connect to Device Connect to Device My locks BLE Lock-PL1 BLE Lock-PL1 Here are your Locks App Store. Open BLE Smart Lock App and select paired lock. Choose a lock to configure Once the installation is completed, turn on the device’s Bluetooth and open “BLE Smart Lock” App to begin pairing. User Name User Name Tony Tony Programming Code ●●●● ●●●● The lock is not set Motor Detect Error Lock Name CONFIRM Home Mail Calendar Photos Camera Maps Clock Weather News Home Notes Favorites BLE Smart Lock Health Settings android app Here are your Locks Choose a lock to configure Nearby locks BLE Lock-PL1 Note : If the password is default value, please change the programming code for locker before pairing. Note : If the password is default value, please change the programming code for locker before pairing. CONNECT Attention: When “The lock is not set” message appears. Please follow the instructions for door handing - so that your lock knows if it is used on a left hand or right hand door. Then proceed with pairing. Connect to Device My lock Wait for the page to scan for Bluetooth locks in range. Locks found will be shown on screen. Select the lock with default name of “BLE Lock-PL1” to continue. Note: Bluetooth scanning time may vary depending on Android manufacturers. Attention: “BLE Lock-PL1” shown in black font means the unit is available. Paired lock names will be shown in red. The default name may vary for other product model. CONFIRM Home CONNECT BLE Smart Lock Home(paired) Programming Code Lock Name ios app Attention: The working range between the lock and your Smartphone is around 16 feet (5m). Nearby locks BLE Lock-PL1 Attention: When “Motor Detect Error” message appears. Bluetooth pairing must be carried out while the lock is in unlocked state. Please first unlock, then proceed with pairing process. Tony Programming Code Connection Note ●●●● Home Signal Strength Always make sure to stand at a close distance from your BLE lock Home CANCEL CONFIRM Note : If the password is default value, please change the programming code for locker before pairing. Home Locked Icon Home Home Bluetooth paring is completed when the lock setting screen displays the following: BLE Lock-PL1 Home Administrator Function Settings User Name Tony Home Programming Code ●●●● Lock Name (Set by user) Go Back Lock Name Home Lock / Unlock Note : If the password is default value, please change the programming code for locker before pairing. CONNECT The GREEN (unlocked) icon means the current status of the lock is "UNLOCKED". Lock Name CONNECT Connect to Device Unlocked Icon Follow the tips, touch lock with mobile phone and select “OK”. This step calibrates the sensor proximity. Please ensure the pairing process is done with mobile phone as close to the lock as possible. Failing to do so will cause sensor distance error and increase safety detection warning area. User Name Home Signal Strength Lock Battery Level Bluetooth signal strength between Smart phone and lock Signal Strength The ORANGE (locked) icon means the current status of the lock is "LOCKED". Brand: EZSET Model: PL2-BT Bluetooth Authentication Safety Detection Press ”Back” key and exit App. When the smart phone is within 20" (50cm) of the lock and the connection has been established a 10 seconds countdown will begin on the lock. If user does not unlock within 10 seconds by pressing the “Bluetooth” button, five short beeps will sound warning the user that currently mobile phone is within connection distance and they should move out of the 20" (50cm) connection range. Make sure your smart phone is within 12" (30cm) of the lock, then push the top button or touch the screen for touchscreen version on your lock to proceed with Bluetooth authentication. Once authenticated, the mobile phone will send “Unlocked” notification and unlock. Bluetooth authentication time may vary between different Android manufacturers and should not take longer than 5 seconds. Attention: If authentication fails, mobile phone will send “Unlock distance error” notification. Please adjust the distance between mobile phone and lock to within 12" (30cm), and then try again. m) 30c 12" Inside distance Outside distance 20" (50cm) 20" (50cm) Administrator Functions Load paired devices list Delete Paired Device From List Select the Setting icon on the top right corner of the locking setting screen to view paired Bluetooth devices. Administrator’s name appears in red. All other users’ name appear in black. (6 devices max, including the administrator) On “Paired Devices” screen, select the “Edit” button on the top right corner and “Delete” icon will appear. After pressing delete icon, confirm by pressing “OK” on the confirmation screen to delete. Devices Home Home Devices Devices Tony Tony Tony Family-1 Family-1 Family-1 Family-2 Family-2 Family-2 Family-3 Family-3 IOS IOS Problem Unable to find locks on the scan page. Family-3 Delete device「IOS」 Possible Causes Actions (1) Bluetooth not turned on. (2) Batteries are low or dead. (1) IOS system please manually IOS Family-4 CANCEL enable Bluetooth function. (2) Change batteries. CONFIRM “The lock is not set” message appears during pairing process. Door handing has not been set. Please refer to user manual and set door handing first before attempting to pair with the lock. “Motor Detect Error” message appears during pairing process. Lock has not been unlocked. Please turn lock bolt to “Unlocked” state/status, then try the pairing process again. “Lock Has Been Reset” message appears when entering Settings screen in App. (1) The lock has been reset by (1) Please turn lock bolt to Signal Strength Review Usage Log Devices Select administrator device name (in red) to review usage log. Attention: Unlocks made with passwords will show in log as “Code”, but no date and time information will be recorded. Records Home Tony Family-1 Family-2 Family-3 IOS 1207 12:10 Tony 1207 12:16 This product complies with standards established by the following regulatory bodies: • Federal Communications Commission (FCC) • Industry Canada Family-1 1207 14:03 FCC IOS 1207 14:23 IOS 1207 15:08 Tony 1207 15:15 IOS 1207 16:11 IOS 1207 16:15 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: ( 1 ) this device may not cause harmful interference, and ( 2 ) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. IMPORTANT ! Changes or modifications not expressly approved by the manufacturer could void the user' authority to operate the equipment. administrator. “Unlocked” state/status, then try the pairing process again. (2) Please consult with the administrator. Unable to perform one push unlock. (1) Mobile phone is too far (1) Please make sure the mobile from the lock. (2)Lock has been reset. phone is within 12" (30cm)of the lock for one push unlock. (2) Please enter the settings page within the App and make sure the lock had not been reset. Safety detection still beeps warning at distance over 3 feet (1m). Mobile phone was not paired correctly by touching the lock during the pairing process. Please reset lock or contact administrator and delete currently user, then try pairing the lock again to establish safety distance. REGULATORY COMPLIANCE Tony other users. (2) User has been deleted by Brand: EZSET Model: PL2-BT Electronic BLE Touch Deadbolt Default programming code (PC): 0000 Default user code (UC): 1234 Your new programming code (PC) ____________ Your new user code (UC) ___________________ 10 Press R The same programming code and user code cannot be accepted. USER GUIDE Do not use any chemical liquid or lubricating oil with additives to clean the lock body. It will damage the surface or even mainboard. The lock will cease operation if unauthorized codes are entered over 5 times. The system will unfreeze after 45 seconds. Enter PC DO THIS FIRST Change Programming Code Enter PC Add New User Code Enter PC Delete an Existing User Code Enter PC Battery Lid Programming Button Battery Holder Enter the UC you want to delete Restore default settings. To lock/unlock the lockset by key from outside. Turn-piece Prevents water from permeating into lockset. To lock/unlock the lockset from inside. Note: Auto-locking and keypad locking functions will be invalid when user codes are deleted. The lock can only be operated by key during that time. R Button (Reset) Washer POSSIBLE CAUSE After installing the lockset and batteries, the door can’t be locked and three short beeps are emitted when you press the lock button. The door-handing identification process isn’t yet complete. Refer to step1. You’ve installed the lockset and batteries, but you still get no response when you press any button. Batteries were installed incorrectly and cable connect incorrectly. Check to see if the battery polarities have been reversed or if the battery is dead. If so, re-install or change the battery. If not, please check to see if the cable is properly connected. When you are in the door-handing identifying process, you get the red light flashing three times, and three short beeps. Wrong door-handing or Press the R button to restore the system change of the door-handing to factory default setting and re-execute in the memory. door-handing identifying process (Refer to step 1) Although you succeeded in the first execution of the door-handing identifying process, the latch still doesn’t work. (i.e. You can feel the motor attempting to run.) Low battery. Replace with new alkaline batteries. The door can be locked normally, but when you try to unlock it, you hear three short beeps and the lock won't unlock when you enter the user code and press the lock button. The functioning of the micro-switch is abnormal. Call our customer service department. While the door is locked, you hear the latch bolt coming out when you press the to lock the door; however, three short beeps are emitted. Conversely, while the door is open, no beeps are emitted when locking the latch bolt. (1) The depth of the latch bolt hole is insufficient. (1) Dig the latch bolt hole for the strike deeper. The minimum depth is 1" (2.5 cm). Enter New UC Delete All User Codes at Once Enter PC Four AA (1.5 V) alkaline batteries. Lock Button is for lock and unlock function. Cylinder PROBLEM CORRECTIVE ACTION Slide the lid to change the batteries. Programming button is for setting function. Lock Buttons Reset button Trouble shooting Note: Up to 30 sets of user codes can be saved. User codes should be 4–10 digits in length. Note: Press the button for more than 5 seconds; the programming is reset back to the original factory codes once you hear 3 long beeps. After restoring default settings, you must run the door handing identifying process (#1) again before programming any other functions. Enter New PC Door Handing Identification Process The lock needs to learn if your door is a right-handed or left-handed. Operational Interface Restore Default Settings Toggle Auto-Lock On/Off Enter PC Operating Instructions Note: The preset delay-time is 30 seconds, you can change the time by following instructions #7. Repeat the steps in #6 to cancel the auto-locking function. Keep the door open while programming to avoid being locked out accidentally. The lock contains one factory-preset user code but can be programmed to store up to a total of thirty additional unique user codes. Codes can be added and deleted at any time. For first-time programming, use factory default programming code. It’s recommended to change the default programming code and default user code right after you install the lock. Every programming step should be done within 6 seconds. Set Auto-Lock Time Delay Enter PC Enter Seconds (10~99) Note: 10–99 seconds delay-time available. (2) The latch bolt is not aimed at the opening of the strike. (2) Adjust the strike to the appropriate position. Operation Indicator Sounds and Lights Sounds Lights Meaning 1 Beep Successful Operation 2 Long Beeps Successful Programming 3 Beeps Operation Error 5 Beeps Code Input Error; System Shuts Down 10 Rapid Beeps Low Battery Power 3 Long Beeps Default Setting Restored Lock button flashes slowly Enable/Disable All User Codes Enter PC Warranty Note: Auto-locking and keypad locking functions will be invalid when user codes are disabled. The lock can only be operated by key during the time. Repeat the steps to enable the user codes again. Create a One-Time User Code 4–10 Digits Long Enter PC Enter One Time Code In Programming Mode Note: The one-time user code will automatically cancel after it is used one time. The manufacturer warrants the product to be free from defects in material and workmanship for a period of 12 months from the original date of purchase. If you discover a defect in the product covered by this warranty, we will repair or replace the item at our option using new or refurbished components. EXCLUSIONS This warranty covers defects in manufacturing discovered while using the products as recommended by the manufacturer rather than occurred by the act of God, and damages caused by misuse, abuse, and unauthorized modification. LIMITED LIABILITY The manufacturer will not be held liable for incidental or consequential losses or damages from any act of God. 1 Brand: EZSET Model: PL2-BT This Manufacturer advises that no lock can provide complete security by itself. This lock may be defeated by forcible or technical means, or evaded by entry elsewhere on the property. No lock can substitute for caution, awareness of your environment, and common sense. Builder's hardware is available in multiple performance grades to suit the application. In order to enhance security and reduce risk, you should consult a qualified locksmith or other security professional. Rotate the thumb turn piece to the LEFT at 45 degrees for right-handed doors. Backset is a distance from door edge to centre of hole on door face. Adjustable latch fits both backset of 2-3/8" (60 mm) and 2-3/4" (70 mm). To identify the centre of strike: close the door to lay the latchbolt against the door frame. Mark the centre line on the doorframe exactly opposite the latch hole in the door edge. Measure one half of door thickness from door stop and vertically mark centre line of strike. Drill 1" (25.4 mm) hole, 1" (25.4 mm) deep at intersection of horizontal and vertical line of strike. Chisel 5/64" (2 mm) deep along the strike outline to allow the strike to be aligned with the doorframe. For right-handed door 10 Mark the Door with Template Select the height and backset as desired on the door face; use the TEMPLATE as an indication to mark the centre of the circle on the door face and the centre of the door edge. Install the strike plate into your door frame and tighten with wood screws. Install Keypad Assembly Install cylinder into the deadbolt keypad assembly with tailpiece in horizontal position inserted through hub of the latch. Screws Battery Cover Pass the IC wire under the latch to the interior side of the door, and insert the tailpiece through the cross-shaped crank of the latch. Connect the IC wire into the back of the receiver module. Ensure that the deadbolt tailpiece is engaged with turn piece, then attach receiver module to the door with screw. Use the optional wood screw to secure the receiver module to wood doors only. Description Description Quantity Part Key Cylinder Strike Plate Mounting Plate Deadbolt Touchpad Assembly Receiver Assembly Deadbolt Latch Battery Cover Drive-in Sleeve Part Drill Holes Cylinder IC wire Using the marks as a guide to drill a hole Ø2-1/8" (54 mm) through the door face for the lockset, then a hole of Ø1" (25.4 mm) for latch. Quantity HARDWARE SCREWS CONTENTS Machine Screws Qty. 3 Wood Screws Qty. 5 Pass the IC wire through the wire hole of the mounting plate. Fix the mounting plate with screws. If outside lock assembly is lopsided, please loosen the screws to adjust its position and tighten the screws again. Install Latch Insert the latch and ensure it is parallel to the door face. Mark the outline of the faceplate, then take out the latch. You need to stay this way up when inserting the latch. 11 Install Inside Mounting Plate Mounting Plate Wood Screw Insert Batteries Insert 4 (AA) 1.5 V alkaline batteries and slide the battery cover back onto the receiver module. Remarks: (1) Alkaline batteries are recommended in order to stabilize the power supply. If you don't use alkaline, battery performance will be reduced greatly. (2) All settings will be retained in the memory even if the batteries are completed dead. Screws Deadbolt Chassis Screws Qty. 2 LATCH ADJUSTMENT Determine if the latch needs to be adjusted to the 2-3/4" (70 mm) backset. To adjust, rotate the latch until it stops. Reverse the direction to return to the 2-3/8" (60 mm) backset. 180° 60 mm 2 3/8" (60 mm) 70 For left-handed door Install Receiver Module Remove the battery cover (push it up first then pull it out). Note : The thumb turn piece is opposite to the latching side. Backset Determination Drive-in Latch PACKAGE CONTENTS Adjust Thumb Turn Piece Rotate the thumb turn piece to the RIGHT at 45 degrees for left-handed doors. Drive-in Installation Remove original latch faceplate. Align the drive-in sleeve as illustrated and snap into the latch case. Do not use an electric screwdriver during installation. Installation Guide Install Strike Determine which latch mounting method will be used and make necessary adjustments. No adjustment required for square latch face plate. a. Use a flat screwdriver to separate the face plate. b. Snap selected latch face onto back plate. Electronic BLE Touch Deadbolt CHANGE LATCH FACE mm 2 3/4" (70 mm) Chisel 5/32" (4 mm) deep along the outline to allow the faceplate to be aligned with the door edge. Note: It is not necessary to chisel the door edge for the faceplate installation if you use the drive-in latch. Insert the latch into the door. (Make sure the cross is on the bottom of the latch.) Use 2 wood screws to secure latch. Please do not fully tighten the screws until lock is completely installed. Identify Door Handing TEMPLATE Face the door from the outside. The door is left-handed if the hinges are on the left side of the door, whereas the door is right-handed if the hinges are on the right side of the door. FOR BACKSET 2-3/4" (70 mm) FOR BACKSET 2-3/8" (60 mm) Fit here on door edge Hinge Hinge 51mm 45mm 40mm 35mm 2" Install Drive-in Latch Drive the latch into the hole on edge of door. 1-3/4" 1-9/16" 1-3/8" Mark Ø1" (25.4 mm) hole at centre of door edge. Left-handed Right-handed Ø2-1/8" (54 mm)
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Author : Kai Hsu_許世凱 Create Date : 2018:10:01 17:31:16+08:00 Modify Date : 2018:10:01 17:31:16+08:00 Title : Has XFA : No XMP Toolkit : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30 Metadata Date : 2018:10:01 17:31:16+08:00 Creator Tool : CorelDRAW X5 Format : application/pdf Creator : Kai Hsu_許世凱 Document ID : uuid:3718b117-085a-4464-9f36-a32c9be31049 Instance ID : uuid:c56fa918-dcf3-4da5-93d0-1ed8c1fe5fab Producer : Corel PDF Engine Version 15.2.0.686 Page Count : 4 Profile CMM Type : Linotronic Profile Version : 2.1.0 Profile Class : Display Device Profile Color Space Data : RGB Profile Connection Space : XYZ Profile Date Time : 1998:02:09 06:49:00 Profile File Signature : acsp Primary Platform : Microsoft Corporation CMM Flags : Not Embedded, Independent Device Manufacturer : Hewlett-Packard Device Model : sRGB Device Attributes : Reflective, Glossy, Positive, Color Rendering Intent : Perceptual Connection Space Illuminant : 0.9642 1 0.82491 Profile Creator : Hewlett-Packard Profile ID : 0 Profile Copyright : Copyright (c) 1998 Hewlett-Packard Company Profile Description : sRGB IEC61966-2.1 Media White Point : 0.95045 1 1.08905 Media Black Point : 0 0 0 Red Matrix Column : 0.43607 0.22249 0.01392 Green Matrix Column : 0.38515 0.71687 0.09708 Blue Matrix Column : 0.14307 0.06061 0.7141 Device Mfg Desc : IEC http://www.iec.ch Device Model Desc : IEC 61966-2.1 Default RGB colour space - sRGB Viewing Cond Desc : Reference Viewing Condition in IEC61966-2.1 Viewing Cond Illuminant : 19.6445 20.3718 16.8089 Viewing Cond Surround : 3.92889 4.07439 3.36179 Viewing Cond Illuminant Type : D50 Luminance : 76.03647 80 87.12462 Measurement Observer : CIE 1931 Measurement Backing : 0 0 0 Measurement Geometry : Unknown Measurement Flare : 0.999% Measurement Illuminant : D65 Technology : Cathode Ray Tube Display Red Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Green Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Blue Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract)EXIF Metadata provided by EXIF.tools