Top Victory Electronics CM990D Color Monitor User Manual D990T
Top Victory Electronics (Taiwan) Co Ltd Color Monitor D990T
users manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 157757 |
| Application ID | 0L39H96YKUrJMB8DA1h0Tw== |
| Document Description | users manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 63.32kB (791519 bits) |
| Date Submitted | 2001-07-03 00:00:00 |
| Date Available | 2001-07-03 00:00:00 |
| Creation Date | 2001-04-12 16:43:42 |
| Producing Software | Acrobat PDFWriter 4.0 for Windows NT |
| Document Lastmod | 0000-00-00 00:00:00 |
| Document Title | D990T.PDF |
| Document Creator | Microsoft Word - D990T |
| Document Author: | YEMMY |
Your Work Never Looked Better 9Elr/9ElrA 9Elr+/9ElrA+ USER MANUAL TABLE OF CONTENTS ENGLISH FOR YOUR SAFETY -------------------------------------------------- 1 SAFETY PRECAUTIONS -------------------------------------- 2 DEUTSCH BEFORE YOU OPERATE THE MONITOR ---------------------FEATURES -------------------------------------------------------PACKING LIST --------------------------------------------------INSTALLATION INSTRUCTIONS --------------------------CONTROLS AND CONNECTORS -------------------------- FRANÇAIS OPERATING INSTRUCTIONS ------------------------------------GENERAL INSTRUCTIONS ---------------------------------HOW TO ADJUST A SETTING -----------------------------ADJUSTING THE PICTURE ---------------------------------POWER MANAGEMENT FEATURE ----------------------PLUG AND PLAY ------------------------------------------------ ESPAÑOL ITALIANO TECHNICAL SUPPORT(FAQ) -------------------------------------10 APPENDIX ---------------------------------------------------------------11 SPECIFICATIONS -----------------------------------------11-12 FACTORY PRESET TIMING TABLE -----------------------13 CONNECTOR PIN ASSIGNMENT ------------------------- 13 LIMITED THREE-YEAR WARRANTY -----------------------14-15 Thank you very much for choosing the AOC Color Monitor. We recommend that you take a few minutes to read carefully through this brief but comprehensive manual before installing and switching on the monitor. Please keep this manual in a safe place for you future reference. Plug & Play Drivers for the AOC Spectrum Series Monitors are available at AOC’s Web Site: www.aoc-europe.com Before operating the monitor please read this manual thoroughly. This manual should be retained for future reference. FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1. Reorient or relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4. Consult the dealer or an experienced radio/TV technician for help. NOTICE : 1. The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits. 3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. It is the responsibilities of the user to correct such interference. As an ENERGY STAR? Partner ,Envision Peripherals Inc. has determined that this product meets the ENERGY STAR? guidelines for energy efficiency. WARNING : To prevent fire or shock hazard, do not expose the monitor to rain or moisture. Dangerously high voltages are present inside the monitor. Do not open the cabinet. Refer servicing to qualified personnel only. PRECAUTIONS ? Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement. ? Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can injure a person and cause serious damage to the appliance. Use only a cart or stand recommended by the manufacturer or sold with the monitor. If you mount the monitor on a wall or shelf, use a mounting kit approved by the manufacturer and follow the kit instructions. ? Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of the monitor and to protect it from overheating, be sure these openings are not blocked or covered. Do not place the monitor on a bed, sofa, rug, or similar surface. Do not place the monitor near or over a radiator or heat register. Do not place the monitor in a bookcase or cabinet unless proper ventilation is provided. ? The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company. ? The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will fit only into a grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire plug, have an electrician install the correct outlet, or use an adapter to ground the appliance safely. Do not defeat the safety purpose of the grounded plug. ? Unplug the unit during a lightning storm or when it will not be used for long periods of time. This will protect the monitor from damage due to power surges. ? Do not overload power strips and extension cords. Overloading can result in fire or electric shock. ? Never push any object into the slot on the monitor cabinet. It could short circuit parts causing a fire or electric shock. Never spill liquids on the monitor. ? Do not attempt to service the monitor yourself; opening or removing covers can expose you to dangerous voltages and other hazards. Please refer all servicing to qualified service personnel. ? To ensure satisfactory operation, use the monitor only with UL listed computers which have appropriate configured receptacles marked between 100 - 240V AC, Min. 2.5A. BEFORE YOU OPERATE THE MONITOR FEATURES ? 48.3cm(19”) Color Monitor ? Crisp, Clear Display for Windows ? Supports Resolutions up to 1600 ? 1200 ? Power Management ? Ergonomic Design (MPR II Approved) ? Space Saving, Compact Case Design CHECKING THE CONTENTS OF THE MONITOR PACKAGE The product package should include the following items: 1. Monitor 2. Owner's Manual 3. Power Cord 4. Swivel Base 5. Audio Cable ( For 9EA/9ElrA only ) INSTALLATION INSTRUCTIONS SWIVEL BASE To attach the swivel base to the monitor, do the following: ? Carefully turn the monitor on its side or upside down. ( see figure 1 ) ? Locate the cavities at the bottom front of the monitor. ? Insert the pegs on the swivel base into these cavities. Push the swivel base forward until the swivel base locks in place. ? To remove the swivel base, hold the bottom of the swivel base, then push it out. Install Remove Install Remove 9E/9Elr Figure 1 9EA/9ElrA Installing and Removing the Swivel Base POWER CORD Power Source: 1. Make sure the power cord is the correct type that required in your area. 2. This monitor has a universal power supply that allows operation in either 100/120V AC or 220/240V AC voltage area ( No user adjustment is required. ) 3. Connect the power cord into your monitor’s power input socket, and then plug the other end into a 3-pin AC power outlet. The power cord may be connected to either a wall power outlet or the power outlet socket on your PC, depending on the type of power cord supplied with your monitor. CONTROLS AND CONNECTORS VIDEO CABLE Connecting the Video Cable: the monitor comes with a built-in video cable. Plug the signal cable?s 15-pin connector into the computer's video port and tighten the two screws on the cable connector. (see figure 2) Caution: Don’t bend the signal cable, otherwise it will break the inner wire. Connecting the Power Cord: Plug the power cord into the monitor's AC power socket. Then plug the power cord into a grounded AC outlet or UL-approved power strip or the power output socket on your PC. Caution: If the AC outlet is not grounded, install the proper grounding adapter (not supplied). Connecting the Audio Cable ( 9EA/9ElrA only ): Plug audio cable between the computer multi-media (or sound) card's audio output and monitor's audio input. Connecting the DC Power Cable ( 9E/9Elr only ): Plug DC power cable between monitor to swivel base for audio power 9E/9Elr Figure 2 1. 2. 3. Power Cord Signal Cable VGA Card Adapter 9EA/9ElrA Connecting Cables 4. 5. PC Audio Output DC Output OPERATING INSTRUCTIONS GENERAL INSTRUCTIONS The power switch is located at front panel of the monitor. Press the power switch to turn the monitor on or off. The other control knobs are located at the base of the monitor (See Figure 3). By changing these settings, the picture can be adjusted to your personal preferences. ? The power cord should be connected. ? Connect the video cable from the monitor to the video card. ? To turn the monitor on, press the POWER switch to ON position. The power indicator will light up. ? Your monitor features a unique quick switch system which provides a picture within seconds after the monitor is switched on. 9E/9Elr Figure 3 9EA/9ElrA External Control Knob EXTERNAL CONTROLS 1. 2. 3. 4. 5. Switch: Power On/Off Switch LED Up Key Down Key Function Key 6. 7. 8. 9. 10. Functions: Contrast Brightness H-Size H-Center V-Size 11. 12. 13. 3+4. 4+5. 12+13. ? Functions:( 9EA/9ElrA ONLY) 14. 15. Audio power indicator Audio power ON/OFF 16. 17. Volume Earphone Jack V-Center Pincushion Trapezoid Recall Degauss Rotation NOTES ? Do not install the monitor in a location near heat sources such as radiators or air ducts , or in a place subject to direct sunlight , or excessive dust or mechanical vibration or shock. Save the original shipping carton and packing materials, as they will come in handy if you ever have to ship your monitor. For maximum protection, repackage your monitor as it was originally packed at the factory. To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn stains may be removed with a cloth lightly dampened with a mild detergent solution. Never use strong solvents such as thinner, benzene, or abrasive cleaners, since these will damage the cabinet. As a safety precaution, always unplug the monitor before cleaning it. HOW TO ADJUST A SETTING 1. Press the knob, the green LED lights and the power is ON. Press this knob again, the green LED disappears and the power is OFF. 2. When press the “FUNC” key, the LED will flash to indicate the function has been selected. 3. When function has been selected, press or to adjust picture image. 4. When eight LEDs don't flash, directly press to select the brightness function or press to select the contrast function. 5. Press the “FUNC” key until the LEDs of pincushion and trapezoid flash simultaneously, then press Up or Down key to adjust the picture tilt to horizontal position. 6. If color impurity occurs when moving or swiveling the monitor, press the Func. key and Down key together as manual degauss function to fix the picture condition. ADJUSTING THE PICTURE The description for function control LEDS 1. CONTRAST Adjust the picture contrast. 2. BRIGHTNESS Adjust the picture brightness. 3. H-SIZE Adjust the picture’s horizontal size. 4. H-CENTER Adjust the horizontal position of the picture. 5. V-SIZE Adjust the picture’s vertical size. 6. V-CENTER Adjust the vertical position of the picture. 7. PINCUSHION Adjust the pincushion and barrel. 8. TRAPEZOID Adjust the picture’s trapezoid distortion. 9. RECALL To recall original factory preset mode. 10. ROTATION Adjust the picture’s tilt to horizontal position. DEGAUSS Fix the picture condition. 11. FUNC.+ POWER MANAGEMENT FEATURE The power management feature of this product complies with every power saving requirements of ENERGY STAR? and VESA DPMS when activated, it automatically reduces unnecessary power consumption of the monitor when your computer is not in use. To use the feature, the monitor needs to be connected to a VESA DPMS computer. There are three power management modes available, these are described below. The required settings, including the timer setting, should be made by the computer. ? Stand-by Mode When the H-sync signal from the computer is off, the monitor enters into Stand-by Mode which reduces the power consumption to less than 15W. The screen becomes dark, and the power indicator turns to orange. From Standby Mode, the screen reappears instantaneously when the keyboard or the mouse is touched again. 9 ? Suspend Mode When the V-sync signal from the computer is off, the monitor enters into Suspend Mode which reduces the power consumption to less than 15W. The screen becomes dark, and the power indicator turns to orange. From Suspend Mode, the screen reappears instantaneously when the keyboard or the mouse is touched again. ? Active-off Mode When both the H and V sync signals form the computer are off, the monitor enters into Active-off Mode which reduces the power consumption to less than 8W. The screen becomes dark, and the power indicator turns to orange. From Active-off Mode, the screen reappears instantaneously when the keyboard or the mouse is touched again. ? The power-saving mode can be indicated by the light-emitting diode (LED) on the front panel: Signal Cable H-Sync V-Sync Attached Yes Yes On* Stand-by Attached No Yes Suspend Attached Yes No Off Attached No No Mode Video Active Blank Blank Blank Indicator Green Orange Orange Orange Power Consumption ? 120 W ? 15 W ? 15 W ? 8W FEATURES Green monitor ? The monitor has a power saving function that conforms to the VESA DPMS standard. This feature will only work if your PC is a green PC. This feature is similar to a screen saver, except that your monitor will turn it off instead of activating the screen saver. To activate this feature in Windows® 98 : In Windows® 98, this feature can be activated and customized under the screen saver setting of the display properties. 1. Right click on the desktop and choose Properties. 2. Click on the tab that says Screen Saver. If your system supports Green PC, there will be a section entitled “Energy Saving Features of Monitor.” If there isn’t a section like that, then your PC does not support Green Monitor. The monitor will behave just like a normal monitor, so you will have to turn it off manually to save energy. 3. In the “Energy Saving Features of Monitor” sections are two boxes, Standby and Shut off. To activate either one, click the box next to each one. 4. You can specify the amount of inactive time before your monitor enters standby mode or shuts off. PLUG AND PLAY 10 Plug & Play DDC1/2B Feature This monitor is equipped with VESA DDC1/2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities. The communication channel is defined in two levels, DDC1 and DDC2B. The DDC1 is a unidirectional data channel from the display to the host that continuously transmits EDID information. The DDC2B is a bidirectional data channel based on the I²C protocol. The host can request EDID information over the DDC2B channel. THIS MONITOR WILL APPEAR TO BE NON-FUNCTIONAL IF THERE IS NO VIDEO INPUT SIGNAL. IN ORDER FOR THIS MONITOR TO OPERATE PROPERLY, THERE MUST BE A VIDEO INPUT SIGNAL. This monitor meets the Power Management standards as set by the Video Electronics Standards Association (VESA) and/or the United States Environmental Protection Agency (EPA) and The Swedish Confederation Employees ( NUTEK ). This feature is designed to conserve electrical energy by reducing power consumption when there is no video input signal present. When there is no video input signal this monitor, following a time-out period, will automatically switch to an OFF mode. This reduces the monitor's internal power supply consumption. After the video input signal is restored, full power is restored and the display is automatically redrawn. The appearance is similar to a "Screen Saver" feature except the display is completely off. The display is restored by pressing a key on the keyboard, or clicking the mouse. USING THE RIGHT POWER CORD : The accessory power cord for the Northern American region is the wallet plug with NEMA 5-15 style and is UL listed and CSA labeled. The voltage rating for the power cord shall be 125 volts AC. Supplied with units intended for connection to power outlet of personal computer: Please use a cord set consisting of a minimum No. 18 AWG, type SJT or SVT three conductors flexible cord. One end terminates with a grounding type attachment plug, rated 10A, 250V, CEE-22 male configuration. The other end terminates with a molded-on type connector body, rated 10A, 250V, having standard CEE-22 female configuration. 11 TECHNICAL SUPPORT (FAQ) Problem & Question Power LED is not on No Plug & Play No picture Picture is fuzzy Picture bounces or a wave pattern is present in the picture Monitor is stuck in “Power Saving Mode” Missing one of the primary colors (RED, GREEN, or BLUE) North America technical support telephone number: Possible Solution *Check if the Power Switch is in the ON position *Power Cord should be connected *Check if the PC system is Plug & Play compatible *Check if the Video Card is Plug & Play compatible *Check if the D-15 plug pin of Video Cable is bent *Make sure the ENVISION Monitor Drivers are installed (ENVISION Monitor Drivers are available at: www.epius.com) *Computer Power Switch should be in the ON position *Computer Video Card should be snugly seated in its slot *The Signal Cable should be completely connected to the computer *Check the color of the Power LED indicator. If it is orange, then the monitor and the PC system are in power-saving mode. You need press your keyboard or move the mouse to reactivate the system. *Adjust the Contrast and Brightness Controls. *Move electrical devices that may cause electrical interference. *Make sure monitor’s video cable is properly connected to the computer. *Inspect monitor’s video cable and make sure none of the pins are bent. *Make sure computer is operational by hitting the CAPS LOCK key on the keyboard while observing the CAPS LOCK LED. The LED should either turn ON or OFF after hitting the CAPS LOCK key. *Inspect the monitor’s video cable and make sure that none of the pins are bent. 1-800-343-5777 12 APPENDIX SPECIFICATIONS CRT Size CRT Viewable Image Size Type Video Separate Sync. H./V.- Sync. H-Frequency V-Frequency Input Scanning Frequency Max. Resolution Video Dot Rate Factory Preset mode : User Programmable mode : Power Source Operating Humidity Dimensions 9E/9Elr : 9EA/9ElrA : Weight 9E/9Elr : 9EA/9ElrA : Signal Cable: 48.3cm(19"), 90º deflection, 29mm neck, 45.7cm (18"), diagonal 0.27mm dot pitch. 0.7Vpp, R,G,B Analog TTL Level Positive / Negative 30kHz - 95kHz 50Hz-160Hz 1600 x 1200 200MHz 10 Universal AC 100 - 240V, 50Hz / 60Hz 0ºC to 40ºC ambient 10%to 85%relative, non-condensing Monitor & Base Monitor & Base 446(W) × 436(H) × 455(D)mm 446(W) × 485(H) × 455(D)mm Unit (net) Unit (net) 18.4kg ( Net ) 19.4kg ( Net ) Attached Mini D-sub 15 Male 446 455 436 (ln mm) 9E/9Elr 9E/9Elr 13 ? Switch External Controls: Power On/Off switch UP/Down Key Function Key Volume(9EA/9ElrA) Contrast Brightness H-Center H-Size V-Center V-Size Pincushion Trapezoid Rotation Degauss Recall DDC1/2B EPA, VESA DPMS 120 Watts 346mm x 260mm Rated Power 1W rms (Per channel) UL, CSA, FDA, FCC, TÜ V/GS, CE, MPR II TCO’95 or TCO’99 (Optional) Functions Plug & Play Power Management Power Consumption ( Maximum ) Pre-set Display Area Audio Output (for 9EA/9ElrA only) Regulatory Compliance 9EA/9ElrA 9EA/9ElrA 14 FACTORY PRESET TIMING TABLE 720 × 400 HORIZONTAL FREQUENCY 31.5kHz VERTICAL FREQUENCY 70Hz VGA 640 × 480 31.5kHz 60Hz VESA/85 640 × 480 43.3kHz 85Hz VESA/85 800 × 600 53.7kHz 85Hz VESA/85 1024 × 768 68.7kHz 85Hz VESA/85 1280 × 960 85.9kHz 85Hz VESA/85 1280× 1024 91.1kHz 85Hz VESA/75 1600× 1200 93.8kHz 75Hz STANDARD RESOLUTION VGA CONNECTOR PIN ASSIGNMENT 10 11 15 15 - Pin Color Display Signal Cable PIN NO. 1. 2. 3. 4. 5. 6. 7. 8. DESCRIPTION PI N NO. DESCRIPTION 9. 10. 11. 12. 13. 14. 15. NC Ground Monitor Ground DDC-Serial Data H-Sync V-Sync / ?V-Clk DDC-Serial Clock For DDC Red Green Blue Ground Ground R-Ground G-Ground B-Ground 15
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Page Count : 15 Creator : Microsoft Word - D990T Create Date : 2001:04:12 16:43:42 Title : D990T.PDF Author : YEMMY Producer : Acrobat PDFWriter 4.0 for Windows NTEXIF Metadata provided by EXIF.tools