Top Victory Electronics CM991H 19" Color Monitor User Manual 41A591 624 2A E

Top Victory Electronics (Taiwan) Co Ltd 19" Color Monitor 41A591 624 2A E

users manual

1Before operating the monitor please read this manual thoroughly. Thismanual should be retained for future reference.FCC Class B Radio Frequency Interference StatementWARNING: (FOR FCC CERTIFIED MODELS)NOTE: This equipment has been tested and found to comply with the limitsfor a Class B digital device, pursuant to Part 15 of the FCC Rules. Theselimits are designed to provide reasonable protection against harmfulinterference in a residential installation. This equipment generates, uses andcan radiate radio frequency energy, and if not installed and used inaccordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will notoccur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined byturning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:1. Reorient or relocate the receiving antenna.2. Increase the separation between the equipment and receiver.3. Connect the equipment into an outlet on a circuit different from that towhich the receiver is connected.4. Consult the dealer or an experienced radio/TV technician for help. NOTICE1. The changes or modifications not expressly approved by the partyresponsible for compliance could void the user's authority to operate theequipment.2. Shielded interface cables and AC power cord, if any, must be used inorder to comply with the emission limits.3. The manufacturer is not responsible for any radio or TV interferencecaused by unauthorized modification to this equipment. It is theresponsibilities of the user to correct such interference.As an ENERGY STAR Partner our company has determined that thisproduct meets the ENERGY STAR guidelines for energy efficiency.WARNING :To prevent fire or shock hazard, do not expose the monitor to rain or moisture.Dangerously high voltages are present inside the monitor. Do not open thecabinet. Refer servicing to qualified personnel only.
2ContentsPacking list ------------------------------------------------ 2Precautions ------------------------------------------------ 3Installation Instructions ----------------------------------- 3Swivel Base ---------------------------------------------- 4Power cord ---------------------------------------------- 4Video cable ---------------------------------------------- 5Operating Instructions ------------------------------------ 6General Instructions ------------------------------------ 6Front panel control -------------------------------------- 7How to adjust a setting --------------------------------- 7Adjusting the picture ------------------------------------ 8Plug and play -------------------------------------------- 10Technical Support (FAQ) ---------------------------------- 11Appendix A – Specifications ------------------------------ 12-13Appendix B – Factory Preset Timing Table -------------- 14PACKING LISTThe product package should include the following items:1. Pure Flat Color Monitor2. Owner's Manual3. Power Cord4. Swivel Base
3PRECAUTIONSlDo not use the monitor near water, e.g. near a bathtub, washbowl, kitchensink, laundry tub, swimming pool or in a wet basement.lDo not place the monitor on an unstable cart, stand, or table. If themonitor falls, it can injure a person and cause serious damage to theappliance. Use only a cart or stand recommended by the manufacturer orsold with the monitor. If you mount the monitor on a wall or shelf, use amounting kit approved by the manufacturer and follow the kit instructions.lSlots and openings in the back and bottom of the cabinet are provided forventilation. To ensure reliable operation of the monitor and to protect itfrom overheating, be sure these openings are not blocked or covered. Donot place the monitor on a bed, sofa, rug, or similar surface. Do not placethe monitor near or over a radiator or heat register. Do not place themonitor in a bookcase or cabinet unless proper ventilation is provided.lThe monitor should be operated only from the type of power sourceindicated on the label. If you are not sure of the type of power supplied toyour home, consult your dealer or local power company.lThe monitor is equipped with a three-pronged grounded plug, a plug witha third (grounding) pin. This plug will fit only into a grounded poweroutlet as a safety feature. If your outlet does not accommodate the three-wire plug, have an electrician install the correct outlet, or use an adapterto ground the appliance safely. Do not defeat the safety purpose of thegrounded plug.lUnplug the unit during a lightning storm or when it will not be used forlong periods of time. This will protect the monitor from damage due topower surges.lDo not overload power strips and extension cords. Overloading can resultin fire or electric shock.lNever push any object into the slot on the monitor cabinet. It could shortcircuit parts causing a fire or electric shock. Never spill liquids on themonitor.lDo not attempt to service the monitor yourself; opening or removingcovers can expose you to dangerous voltages and other hazards. Pleaserefer all servicing to qualified service personnel.lTo ensure satisfactory operation, use the monitor only with UL listedcomputers which have appropriate configured receptacles markedbetween 100 - 240 VAC, Min. 2.5A.l The wall socket shall be installed near the equipment and shall be easilyaccessible.
4INSTALLATION INSTRUCTIONSSwivel BaseTo attach the swivel base to the monitor, do the following:?Carefully turn the monitor on its side or upside down. ( see figure 1 )?Locate the cavities at the bottom front of the monitor.?Insert the pegs on the swivel base into these cavities. Push the swivel baseforward until the swivel base locks in place.?To remove the swivel base, hold the bottom of the swivel base, then pushit out. Install Remove12Figure 1 Installing and Removing the Swivel BasePower CordPower Source:1. Make sure the power cord is the correct type that required in your area.2. This monitor has a universal power supply that allows operation in either100/120V AC or 220/240V AC voltage area ( No user adjustment isrequired. )3. Connect the power cord into your monitor’s power input socket, and thenplug the other end into a 3-pin AC power outlet. The power cord maybe connected to either a wall power outlet or the power outlet socket onyour PC, depending on the type of power cord supplied with yourmonitor.
5Video cableConnecting the Video Cable: The monitor comes with a built-in video cable.Plug the signal cable's 15-pin connector into the computer's video port andtighten the two screws on the cable connector.Caution: Don’t bend the signal cable, otherwise it will break the inner wire.Connecting the Power Cord: Plug the power cord into the monitor's ACpower socket. Then plug the power cord into a grounded AC outlet or UL-approved power strip or the power output socket on your PC.Caution: If the AC outlet is not grounded, install the proper groundingadapter (not supplied).12Figure 2 Connecting Cables1. Power Cord 2. Signal Cable
6OPERATING INSTRUCTIONSGeneral InstructionsThe other control knobs are located at the base of the monitor (See Figure 3).By changing these settings, the picture can be adjusted to your personalpreferences.?The power cord should be connected.?Connect the video cable from the monitor to the video card.?To turn the monitor on, press the POWER switch to ON position. Thepower indicator will light up.?Your monitor features a unique quick switch system which provides apicture within seconds after the monitor is switched on. EXITMENUFigure 3 External Control KnobEXTERNAL CONTROLS1. POWER2. POWER INDICATOR3. MENU4. CONTRAST/ 5. BRIGHTNESS/6. EXITNotes?Do not install the monitor in a location near heat sources such as radiatorsor air ducts , or in a place subject to direct sunlight , or excessive dust ormechanical vibration or shock.?Save the original shipping carton and packing materials, as they will comein handy if you ever have to ship your monitor.?For maximum protection, repackage your monitor as it was originallypacked at the factory.?To keep the monitor looking new, periodically clean it with a soft cloth.Stubborn stains may be removed with a cloth lightly dampened with amild detergent solution. Never use strong solvents such as thinner,
7benzene, or abrasive cleaners, since these will damage the cabinet. As asafety precaution, always unplug the monitor before cleaning it.Front Panel Control? : Press this knob to switch ON/OFF of monitor’s power.? MENU : Active OSD menu or function adjust confirm.? / : Adjust contrast or function adjust.? / : Adjust brightness or function adjust.? EXIT : Exit a function or inactive OSD menu.?Power Indicator :Green — Power On mode.Orange — Off mode.How to adjust a settingThe monitor controls are accessed by pressing button MENU to enable OSD(On-Screen-Display). The main menu will be displayed as follows.70V: 85Hz93006500H: 68.8KHzContrastFigure 4 The OSD MessageNote: If adjustment or selection of any OSD menu is not made for more than10 seconds, the current setup will be saved and the OSD will disappearautomatically.
8Adjusting the picture The description for functional control icons1. CONTRAST : Adjust the picture contrast.2. BRIGHTNESS :Adjust the picture brightness.3. H-CENTER :Adjust the horizontal position of the picture.4. H-SIZE :Adjust the picture’s horizontal size.5. V-CENTER :Adjust the vertical position of the picture.6. V-SIZE :Adjust the picture’s vertical size.7. ZOOM : Adjust the picture’s horizontal and vertical size simultaneously.8. PINCUSHION :Adjust the pincushion and barrel .9. TRAPEZOID :Adjust the picture’s trapezoid distortion.10. PIN-BALANCE :Adjust to compensate the pincushion unbalance.11. PARALLELOGRAM :Adjust the picture to be a rectangle.12. ROTATION :Adjust the picture tilt to horizontal position.13. 6500°K/9300°K ( COLOR TEMPERATURE ) : The color temperature for 6500°K is x=0.313, y=0.329 and 9300°K is x=0.283, y=0.297. It presents two different color sets on the screen. You can select 9300°K or 6500°K by pressing MENU Key.14. USER COLOR ( Red / Blue ) :If the 9300°K normal white or 6500°K warmer white do not satisfyyour desire, properly adjust R . B GAIN controls to obtain youroptimum whiteness level.15. DEGAUSS :If color impurity occurs when moving or swiveling the monitor,press MENU Key and degauss to fix the picture condition.
916. MOIRE REDUCE :Moire is the result of interference between the phosphor layout andthe video signal. In some cases, you may find the moire verynoticeable. Press the MENU to enter in the moire reduce setting.Please adjust the level to the optimum condition. Note: Too high of asetting will cause the picture to shake.17. RECALL :Press RECALL to restore the monitor to factory settings.18. EXIT :Close OSD window.19. SELECT LANGUAGE :Select the language as you like.
10THIS MONITOR WILL APPEAR TO BE NON-FUNCTIONAL IFTHERE IS NO VIDEO INPUT SIGNAL. IN ORDER FOR THISMONITOR TO OPERATE PROPERLY, THERE MUST BE A VIDEOINPUT SIGNAL.This monitor meets the Green Monitor standards as set by the VideoElectronics Standards Association (VESA) and/or the United StatesEnvironmental Protection Agency (EPA) and The Swedish ConfederationEmployees ( NUTEK ). This feature is designed to conserve electrical energyby reducing power consumption when there is no video input signal present.When there is no video input signal this monitor, following a time-out period,will automatically switch to an OFF mode. This reduces the monitor's internalpower supply consumption. After the video input signal is restored, full poweris restored and the display is automatically redrawn. The appearance is similarto a "Screen Saver" feature except the display is completely off. The displayis restored by pressing a key on the keyboard, or clicking the mouse.Plug and playPlug & Play DDC1/2B FeatureThis monitor is equipped with VESA DDC1/2B capabilities according to theVESA DDC STANDARD. It allows the monitor to inform the host system ofits identity and, depending on the level of DDC used, communicate additionalinformation about its display capabilities. The communication channel isdefined in two levels, DDC1 and DDC2B.The DDC1 is a unidirectional data channel from the display to the host thatcontinuously transmits EDID information. The DDC2B is a bidirectional datachannel based on the I²C protocol. The host can request EDID informationover the DDC2B channel.Video Cable Pin Assignments:1. Red 5. Ground 9. NC 13. H-sync2. Green 6. R-Ground 10. Ground 14. V- sync / * VCLK3. Blue 7. G-Ground 11. Monitor Ground 15. DDC-Serial Clock4. Ground 8. B-Ground 12. DDC-Serial Data * FOR DDC
11TECHNICAL SUPPORT (FAQ)Problem & Question Possible SolutionPower LED is not on *Check if the Power Switch is in the ONposition*Power Cord should be connectedNo Plug & Play *Check if the PC system is Plug & Play compatible*Check if the Video Card is Plug & Playcompatible*Check if the D-15 plug pin of VideoCable is bent*Make sure the Monitor Drivers areinstalledPicture is fuzzy *Adjust the Contrast and BrightnessControls.Picture bounces or a wave patternis present in the picture *Move electrical devices that may causeelectrical interference.The power LED is ON (orange)but there’s no video or no picture. *Computer Power Switch should be in theON position*Computer Video Card should be snuglyseated in its slot*Make sure monitor’s video cable isproperly connected to the computer.*Inspect monitor’s video cable and makesure none of the pins are bent.*Make sure computer is operational byhitting the CAPS LOCK key on thekeyboard while observing the CAPSLOCK LED. The LED should eitherturn ON or OFF after hitting the CAPSLOCK key.Missing one of the primary colors(RED, GREEN, or BLUE) *Inspect the monitor’s video cable andmake sure that none of the pins are bent.
12APPENDIX A - SPECIFICATIONSCRT 48.3cm(19"), 90° deflection, 29mm neck,0.25mm dot pitch non-glare screen.Viewable Image Size 45.7cm (18"), diagonalDisplay Color Unlimited colorsInput Signal Analog input All timing that meets scanningfrequencies?Video ?Analog R, G, B 0.7Vpp positive/75 ohm?Sync. ?Horizontal sync. : Positive/Negative?Vertical sync. : Positive/NegativeSynchronization?Horizontal 30kHz to 95kHz automatically?Vertical 50Hz to 160Hz automaticallyMax. Resolution 1600 × 1200Video Dot Rate 200MHzFactory Preset Timings : 8User mode Timings : 20Misconvergence?Center 0.3mm Max.?Corner 0.4mm Max.Power Source Switching mode power supplyAC 100-240V, 50Hz/60Hz full rangeOperating 0°C to 40°C ambientHumidity 10% to 85% relative, non-condensingWeight 20.0kg(Net)Dimensions•Monitor 446(W) × 436(H) × 455(D)mmSignal Cable 15 pin mini D-SubExternal Controls:Switch ?Power On/Off Switch?MENU Key?Contrast/ UP Key?Brightness/ Down Key?EXIT Key
13Functions ( OSD )? Contrast? Brightness? H-Center? H-Size ? V-Center? V-Size? Zoom? Pincushion? Trapezoid? Pin-Balance? Parallelogram? Rotation? 6500°K? User color? 9300°K? Degauss? Moire Reduce? Recall? Exit? Select languagePlug & Play DDC1/2B On Mode = 130WEPA ENERGY STAR® Off Mode = 5WPower consumption 130W Max.Preset display area 346mm × 260 mmRegulations UL, CSA, TÜV / GS, FCC, FDA,MPR II
14APPENDIX B – FACTORY PRESET TIMING TABLESTANDARD RESOLUTION HORIZONTALFREQUENCY VERTICALFREQUENCYVGA 720 × 400 31.5kHz 70HzVGA 640 × 480 31.5kHz 60HzVESA/85 640 × 480 43.3kHz 85HzVESA/85 800 × 600 53.7kHz 85HzVESA/85 1024 × 768 68.7kHz 85HzVESA/85 1280 × 960 85.9kHz 85HzVESA/85 1280× 1024 91.1kHz 85HzVESA/75 1600× 1200 93.8kHz 75Hz

Navigation menu