Top Victory Electronics PD4203G 42" pdp User Manual PT4231 English TV

Download:
Mirror Download [FCC.gov]
Document ID	422257
Application ID	UQtrUjO1mE9haQrzj5CFuA==
Document Description	users manual 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	47.67kB (595881 bits)
Date Submitted	2004-05-12 00:00:00
Date Available	2004-05-05 00:00:00
Creation Date	2004-05-05 12:31:58
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2004-05-05 12:31:58
Document Title	Microsoft Word - PT4231-English-TV.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	kathy

TABLE OF CONTENTS
Before Use…………………...………………………………………….……
Introduction ……………………………………………………..……….…
Part Names and Function ………………………………………………....
Installation ……………………………………………………………….…
OSD (On Screen Display) Controls ………………………………….……
11
RS232C Control ………………………………………………………….....
19
Troubleshooting ……………………………………………………….……
20
Specifications …………………………………………………………….…
20
Before Use
Before operating the tv, please read this manual thoroughly. This manual should be retained for future reference.
FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS)
NOTE: This equipment has been tested and found to comply with the limits residential installation. This equipment
generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
NOTICE:
1.
2.
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this
equipment. It is the responsibilities of the user to correct such interference.
To avoid the risk of electric shock or component damage, switch off the power before connecting the PDP to other
devices, such as VCR, DVD or PC.
Introduction
The features you’ll enjoy include:
Advanced DCDi Sampling Progressive Scan method is employed.
480p, 720p and 1080i HDTV signal compatibility.
PCs, VCRs, Laser Disc and DVD player source compatibility.
RGB input (2*), Video input (2*), YPbPr or YCbCr input (1*), Audio input (3), External Control input (1).
Component video input terminal for DVD, 15.75 kHz (YCbCr), 31.5 kHz (YPbPr).
Receive TV / cable broadcasting program．
Contents of the Package
Video/Audio cable (RCA pin jack to RCA pin jack connector × 3 ).
Part Names and Function
1.
2.
3.
4.
5.
6.
7.
8.
CH
POWER
POWER/Standby Indicator
REMOTE SENSOR Windows
INPUT Select
MENU
SETTING
ADJ. + , ADJ. - / VOL + , VOL CH+, CH-
7 6 5 4 3 2 1
Front View
4.
INPUT Select
Switch the input in the following order.
The available component input depends on the setting of “component input”.
Video Æ S-video
Æ Component input ( YCbCr or YPbPr )
TV Å DVI Å D-sub 15 PIN
5.
MENU
Sets the On-Screen Display (OSD) Menu mode and displays the main menu.
6.
SETTING
． In the on screen menu execute the selected highlight item or level setting
˙ Not in the on screen menu mode:
Switches the second screen input in the following order
Video Æ S-video Æ Component input (YCbCr) ÆTV
8.
CH+, CH- (Only for TV function)
Increase / decrease TV channel number.
Rear View / Terminal Board
EXT SPEAKER L and R OUTPUT
AUDIO1, AUDIO2, AUDIO3
VIDEO
S-VIDEO INPUT
L3
R3
L2
R2
L1
R1
AV - In
S -Vi d e o
VIDEO OUTPUT
AV - Ou t
Pb
Pr
COMPONENT INPUT
TV INPUT
D -SUB
DV I
RS - 232C
AC IN
Tu n e r
EXT SPEAKER L and R OUTPUT
Connect external speakers here. Maintain the correct polarity.
AUDIO1, AUDIO2, AUDIO3
These are Audio input terminals.
You can select the video source to match the audio source on the OSD menu.
The Audio3 can be set either input or output mode on the OSD menu.
VIDEO, S-VIDEO INPUT
Connect composite signal to VIDEO INPUT. Connect S-Video signal to S-VIDEO INPUT.
VIDEO OUTPUT
Output the video in composite video format.
COMPONENT INPUT
YPbPr signal : Connect YPbPr video signal from video source, such as progressive scan DVD player.
YCbCr signal : Connect YCbCr video signal from video source, such as non-progressive scan DVD player.
TV INPUT
Receive TV/cable broadcasting program.
Remote Control
POWER
MUTE
MUTE ON Æ MUTE OFF Æ MUTE ON
Switches power ON/OFF.
(This does not operate when
POWER/STANDBY indicator of the main
unit is off.)
GRAPHIC
POWER
VIDEO
Press this button to select video source on main screen.
Æ VIDEO Æ S-VIDEO Æ COMPONENT VIDEO
VIDEO
COMP
GRAPHIC
VIDEO can also be selected using the INPUT SELECT
button on the TV.
TV
Inputs RGB signal of personal computer,
etc.
RGB:
Æ D_sub 15 pin Æ DVI
CH
TV
Switch to TV channel
MUTE
CH+, CHIncrease / decrease TV channel number.
COMP
Press this button to select component video
CHRTN
source on MAIN screen.
VOL
CHRTN
0 ~ 9 –100 numeral keypad
Input TV channel number directly.
PIP
Example: select channel 20, directly key in
MTS
PIP I/P
SWAP
MENU
“2”, “0”. To select channel 8, you can
WIDE
ENTER
directly key in “0”、“8”，or only key in “8”
you must be wait for 5 sec.
ADJ
ADJ
Select channel 104, directly key in”100”,
At TV mode to exchange channel between
currently channel and before channel
At channel scan press “CHRTN” KEY to
stop channel scan.
VOL +, VOL –
Volume up / down.
MTS
“0”, “4”
Select stereo, mono or SAP.
A, B
Preset two channel hot key.
CCD
V-CHIP
TT
HOLD
EXIT
INDEX
MIXER
DISPLAY
PIP
Normal ÆPIPÆ POP 2 (LEFT &
RIGHT) ÆNORMAL
FREEZE
SLEEP
SUBTITLE REVEAL
WIDE
4:3 Æ 16:9 Æ ZOOM 1 (VIDEO ONLY) Æ
ZOOM 2 (VIDEO ONLY) Æ 4:3
(ZOOM 1 and ZOOM 2 only work on
composite video, s-video and component video.)
PIP I/P
SWAP (PIP & POP mode only)
Press this button to select video source on
second screen.
Swap the screen of PIP or POP
(Only work at main screen source VIDEO/SVIDEO/YCbCr)
MENU
DISPLAY OSD MENU
ENTER
ADJ+, ADJ-
Execute the selected highlight item or level
setting
Highlight the submenu or item you wish to
CCD
enter
Setting the caption to turn on or off
Adjust the level or change the setting of the
V-CHIP
selected item
RISTRICT TV and Movie Viewing
SLEEP
according to the parental level
NO TURN OFF Æ 30 MIN OFF Æ 60 MIN
FREEZE
freeze on Æ freeze off Æ freeze on
chosen.
OFF Æ 90 MIN OFF Æ 120 MIN OFF Æ
The preset PIN number to allow
NO TURN OFF
modification of the parental level set
is “0000”.
Change this number to one you can
remember the master PIN number
will show as “xxxx” and if forgotten
cannot be reset.
Reserved keys
TT, HOLD, SUBTITLE
REVEAL, R, G, Y, C, EXIT,
INDEX, MIXER, DISPLAY
*For teletext control only
Battery Installation and Replacement
Insert the battery, making sure to set them in with the proper polarity.
1.
Press and open the cover.
2.
Align the batteries according 3.
to the (+) and (-) indication
inside the case.
Replace the cover.
BATTERY CAUTIONS
Use only the size and type of batteries specified.
Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment.
Reversed batteries may cause damage to the device.
Do not mix different types of batteries together (e.g. alkaline and carbon-zinc) or old batteries with fresh ones.
If the device in not to be used for a long period of time, it is required to remove the batteries to prevent damage or
injury from possible battery leakage.
Do not try to recharge batteries which is not intended to be recharged; they can overheat and rupture. (follow
battery manufacturer’s directions)
Weak batteries can leak and severely damage the unit.
Always remove batteries as soon as they become weak.
The batteries of remote control may last approximately one year depending on how much the remote control is
used.
For the best performance it is recommended the batteries of remote control be replaced on a yearly basis, or when
remote control operation becomes erratic.
Do not take apart the batteries, heat them, or throw them into a fire.
Operating Range
Handling the remote control
Do not drop or mishandle the remote control.
Do not get the remote control wet. If the remote control
gets wet, wipe it dry immediately.
Avoid heat and humidity.
MUT
TV
CH
GRA
PHIC
ADJ
SL
EEP
REVEA
FREE
ZE
DISP
LAY
SUBT
ITLE
V-CHI
MIXE
HOLD
CC
TT
INDEX
EXIT
COMP
VOL
POW
ER
WIDE
VIDE
CHRT
SWA
ENTE
MTS
I/P
PIP
PIP
30
7m
MENU
Use the remote control within a distance of about 7m/23ft. from the front of the tv’s remote control sensor and at
horizontal and vertical angles of up to approximately 30°.
The remote control operation may not function if the tv’s remote control sensor is exposed to direct sunlight or
strong artificial light, or if there is an obstacle between the sensor and the remote control.
ADJ
Installation
Connecting Your VCR or Laser Disc Player
Use common RCA cables to connect your VCR or laser disc player to your plasma tv. To make these connections,
simply:
1.
2.
3.
Turn off the power to your plasma tv and VCR or laser disc player.
Connect one end of your RCA video to the video output connector on the back of your VCR or laser disc player,
connect the other end to the Video input on your plasma tv. Use standard RCA audio patch cords to connect the
audio from your VCR or laser disc player to your plasma tv (if your VCR or laser disc player has this capability).
Be careful to keep your right and left channel connections correct for stereo sound.
Turn on the plasma tv and the VCR or laser disc player.
Note: Refer to your VCR or laser disc player owner’s manual for more information about your equipment’s
video output requirements.
Connecting TV system
Use 75Ω standard coaxial cable to your plasma TV, To receive TV program.
For reduce noise of the RF signal level then we suggest that custom uses shielding coaxial cable to get good quality of
signal. To make these connections, simply:
1. Turn off the power to your plasma tv.
2. Connect one end of your coaxial cable to the RF input on your plasma tv.
3. Turn on the plasma tv.
此图中的单词
L3
R3
L2
R2
L1
R1
AV-In
S-Vi deo
AV-Out
Pb
Pr
D - SUB
DVI
RS - 232 C
AC IN
Tuner
Power
Cable TV
Connecting Your DVD Player
You can connect your plasma tv to a DVD player. To do so, simply:
1.
2.
3.
4.
Turn off the power to your plasma tv and DVD player.
Use a video cable (with Yellow RCA terminal) to connect your DVD player to the video input of plasma TV. If
your DVD player has component video output (YCbCr or YPbPr), use component cable to connect to component
inputs on your plasma TV. Or use the DVD player’s S-Video output. Use a standard S-Video cable to connect to
the S-Video input on the plasma TV S-Video input.
Use a pair of RCA audio cable (with Red and White RCA terminals) to connect the audio outputs of DVD player to
one of the audio inputs on plasma TV.
Turn on the plasma tv and the DVD player.
此图中的单词
L3
R3
L2
R2
L1
R1
AV-In
S-Vi deo
AV-Out
Pb
Pr
Amplifier
D - SUB
DV I
RS - 232 C
AC IN
Tuner
TV
VIDEO/OUT
Speaker
DVD/VCR/Laser Disc
Settop Box
Power
PC
External Speaker Connections
External speakers (Option) may be connected to the plasma tv to reproduce sound.
External speakers may be connected directly to the EXT SPEAKER L and R Output terminals.
(Connect EXT SPEAKER OUTPUTS to external speakers only. DO not connect EXT SPEAKER OUTPUTS to audio
power amplifier, because you may damage the audio power amplifier.)
CAUTION: Unplug the plasma tv and all connected components before connecting external speakers. Use
only speakers with 8-ohm impedance and a power input rating of 10 watts or more.
To connect external speakers directly to the plasma tv:
1.
2.
Strip the ends of the speaker wires.
Press down the tabs below the SPEAKERS terminals, insert the speaker wire and release the tab to secure the
speaker sire connection:
(a) Connect the right speaker (located at right side of the tv when viewed from the front) positive (+) wire to
RIGHT +.
(b) Connect the right speaker negative (-) wire to RIGHT -.
(c) Connect the left speaker negative (-) wire to LEFT -.
(d) Connect the left speaker positive (+) wire to LEFT+.
10
OSD (On Screen Display) Controls
Menu Operations
Your PDP screen has an easy and convenient menu operation
system. It helps you to use each PDP function quickly.
PICTURE
BRIGHTNESS
CONTRAST
SHARPNESS
COLOR
TINT
COLOR TEMPERATURE
EXIT MENU
08
16
+00
16
+00
NORMAL
: SELECT MAIN MENU
：OK
1.
After powering on PDP, press the MENU button on the
remote control. The menu operation system will display on
the screen.
2.
Press the ADJ+/ADJ- button on the remote control to display,
change, or use the selected menu. Press the ENTER button to
enter each item on the menu (now the item glows green); if
you need to change the selected item, press the ENTER
PICTURE
BRIGHTNESS
CONTRAST
SHARPNESS
COLOR
TINT
COLOR TEMPERATURE
EXIT MENU
SELECT ITEM
08
16
+00
16
+00
NORMAL
：OK
button again to make changes (now the item glows red). After
the change is made, press the ENTER button to exit the menu
setup. If no operation is detected, the on screen menu will
disappear after 20 seconds. You may also exit menu operation
interface quickly by pressing the MENU button on the
remote control.
PICTURE
BRIGHTNESS
CONTRAST
SHARPNESS
COLOR
TINT
COLOR TEMPERATURE
EXIT MENU
: ADJUSTMENT
08
16
+00
16
+00
NORMAL
：OK
11
Picture Quality Adjustment
Your PDP has the following setup options which allow you to
improve the picture quality.
PICTURE
BRIGHTNESS
CONTRAST
SHARPNESS
COLOR
TINT
COLOR TEMPERATURE
EXIT MENU
08
16
+00
16
+00
NORMAL
Brightness, contrast, sharpness, color, tint (only for NTSC), and
color temperature.
When the Picture is selected, you can adjust the following items:
1.
: SELECT MAIN MENU
on the screen.
：OK
2.
PICTURE
BRIGHTNESS
CONTRAST
SHARPNESS
COLOR
TINT
COLOR TEMPERATURE
EXIT MENU
SELECT ITEM
Press MENU button to display the menu operation interface
Press ADJ+/ADJ- button to select Picture menu. Then press
ENTER again to enter Picture submenu (selected item glows
08
16
+00
16
+00
NORMAL
green).
3.
Press ADJ+/ADJ- button to select the item you need then
press ENTER button again to enter the selected
adjustment submenu (Now the item glows red).
：OK
4.
Adjustment items…
Brightness
: ADJUSTMENT
08
16
+00
16
+00
NORMAL
Sharpness
Color
Tint
Color Temperature
PICTURE
BRIGHTNESS
CONTRAST
SHARPNESS
COLOR
TINT
COLOR TEMPERATURE
EXIT MENU
SELECT ITEM
If you are satisfied with your setup, press ENTER button
again to complete menu setup (selected adjustment item
PICTURE
: ADJUSTMENT
Select desired color temperature
（Normal, cold, warm）
：OK
5.
BRIGHTNESS
CONTRAST
SHARPNESS
COLOR
TINT
COLOR TEMPERATURE
EXIT MENU
Increase or decrease
Contrast
PICTURE
BRIGHTNESS
CONTRAST
SHARPNESS
COLOR
TINT
COLOR TEMPERATURE
EXIT MENU
Press ADJ+/ADJ- …
08
16
+00
16
+00
NORMAL
glows green again).
：OK
08
16
+00
16
+00
NORMAL
：OK
12
Picture-in-Picture
You can select Picture-in-Picture (PIP) display mode to display
two different pictures on the screen.
DISPLAY
POSITION
SIZE
PICTURE MODE
PIP SETUP
CLOCK
FOCUS
AUTO FOCUS
EXIT MENU
Note: TV and composite video pictures cannot be displayed at the
SINGLE
same time under PIP mode.
+000
16
When the component input is YCBCR, if the primary
picture input is TV or VIDEO, then YCBCR or S-VIDEO
: SELECT MAIN MENU
can be displayed as the secondary picture.
：OK
When the component input is YPBPR, if the primary
picture input is TV or VIDEO, then only S-VIDEO can be
displayed as the secondary picture.
DISPLAY
POSITION
SIZE
PICTURE MODE
PIP SETUP
CLOCK
FOCUS
AUTO FOCUS
EXIT MENU
SINGLE
+000
16
1.
Press MENU button to display the menu operation interface
on the screen.
2.
Press ADJ+/ADJ- button to select Display menu and then
press ENTER button.
SELECT ITEM
3.
：OK
Press ADJ+/ADJ- button to select the Display Mode under
Display menu, and then press the ENTER button (now the
Display Mode item glows red).
DISPLAY
4.
POSITION
SIZE
PICTURE MODE
PIP SETUP
CLOCK
FOCUS
AUTO FOCUS
EXIT MENU
Press ADJ+/ADJ- button again to select PIP, and then press
the ENTER button. PIP mode is displayed on the screen.
SINGLE
+000
16
You can also turn on PIP function by using remote control.
: ADJUSTMENT
Meanwhile, you can use the buttons on the remote control to
：OK
operate more functions.
DISPLAY
POSITION
SIZE
PICTURE MODE
PIP SETUP
CLOCK
FOCUS
AUTO FOCUS
EXIT MENU
: ADJUSTMENT
Button name
Function Descriptions
1．
PIP
Turn on/off PIP/POP functions.
2．
VIDEO
Select the display mode of the
SINGLE
+000
16
primary picture.
3．
PIP I/P
Select the display mode of the
secondary picture.
：OK
4．
SWAP
Switch between the primary and
secondary pictures.
13
Sound Setup
¾
function. You can select different functions based on
SOUND
TREBLE
BASS
BALANCE
SPEAKER
AUDI01 INPUT
AUDI02 INPUT
AUDI03 INPUT
SOUND MODE
EXIT MENU
Your PDP has an external/internal speaker selecting
+00
08
08
+00
INTERNAL
VIDEO
S-VIDEO
YCBCR
NORMAL
your preferences.
¾
allow you to setup the audio input method as you wish
and brings you more enjoyment.
¾
: SELECT MAIN MENU
Your PDP has three sets of audio input options which
：OK
You can adjust the audio setup based on your
preferences.
Treble, bass, balance, sound mode.
Your PDP was manufactured upon the certification and
SOUND
TREBLE
BASS
BALANCE
SPEAKER
AUDI01 INPUT
AUDI02 INPUT
AUDI03 INPUT
SOUND MODE
EXIT MENU
+00
08
08
+00
INTERNAL
VIDEO
S-VIDEO
YCBCR
NORMAL
authorization of BBE Company.
1. Press MENU button to display the menu operation interface
on the screen.
2. Press ADJ+/ADJ- button to select the sound menu and then
SELECT ITEM
：OK
press ENTER button.
3. Press ADJ+/ADJ- button to select the item you want to adjust
and then press the ENTER button to enter the selected
SOUND
TREBLE
BASS
BALANCE
SPEAKER
AUDI01 INPUT
AUDI02 INPUT
AUDI03 INPUT
SOUND MODE
EXIT MENU
+00
: ADJUSTMENT
08
08
+00
INTERNAL
VIDEO
S-VIDEO
YCBCR
NORMAL
adjustment item (now the item glows red).
4. Adjustment Item
：OK
Treble
Increase or decrease
Bass
Increase or decrease
Balance
Increase or decrease
Speaker
Internal or external
Sound Mode
Select the sound mode desired.
(Normal, 3D Stereo, WOW, BBE)
SOUND
TREBLE
BASS
BALANCE
SPEAKER
AUDI01 INPUT
AUDI02 INPUT
AUDI03 INPUT
SOUND MODE
EXIT MENU
+00
08
08
+00
INTERNAL
VIDEO
S-VIDEO
YCBCR
NORMAL
AUDIO1 Input
Select input mode
（VIDEO, S-VIDEO, YCBCR/YPBPR, RGB, DVI）
AUDIO2 Input
Select input mode
（VIDEO, S-VIDEO, YCBCR/YPBPR, RGB, DVI）
AUDIO3 Input
SELECT ITEM
Press ADJ+/ADJ- …
：OK
Select input mode
（VIDEO, S-VIDEO, YCBCR/YPBPR, RGB, DVI）
5.
If you are satisfied with the setup, press the ENTER button
again to complete the menu setup (selected adjustment item
glows green again).
14
Function Setup
Your PDP adds some special functions in the function setup
menu to provide you with more benefits.
FUNCTION
OSD DISPLAY
AUTO OFF
WHITE SCREEN
RESET
EXIT MENU
ON
ON
OFF
OSD
By turning on this function, you can see the current screen display
: SELECT MAIN MENU
：OK
mode while watching and changing programs.
Auto Off
By turning on this function, if there is no signal input detected for
FUNCTION
OSD DISPLAY
AUTO OFF
WHITE SCREEN
RESET
EXIT MENU
ON
ON
OFF
a period of time, PDP will be turned off automatically to save
energy.
White Screen
SELECT ITEM
：OK
This function is usually turned off under normal situations. It is
used as a screen evaluation tool while repairing PDP.
Reset
FUNCTION
OSD DISPLAY
AUTO OFF
WHITE SCREEN
RESET
EXIT MENU
ON
ON
OFF
Reset to factory’s default settings.
1.
Press the MENU button to display the menu operation
interface on the screen.
: ADJUSTMENT
：OK
2.
Press ADJ+/ADJ- button to select Function menu and then
press the ENTER button.
3.
FUNCTION
OSD DISPLAY
AUTO OFF
WHITE SCREEN
RESET
EXIT MENU
: ADJUSTMENT
ON
ON
OFF
and then press the ENTER button to enter the adjustment
item selected (now the item glows red).
4.
：OK
Press ADJ+/ADJ- button to select the item you want to adjust
Adjustment Item…
Press ADJ+/ADJ-..
OSD
On or off
Auto Off
On or off
White Screen
On or off
Reset
Press ENTER button to reset
15
Language Selection
CONFIGURATION
LANGUAGE
COMPONENT INPUT
RGB SOURCE
DB15 SOURCE
COLOR SYSTEM
EXIT MENU
: SELECT MAIN MENU
When you use PDP for the first time, please select the
desired OSD language.
ENGLISH
YCBCR
NORMAL
GRAPHICS
AUTO
1.
Press the MENU button on the remote control to display the
menu operation interface on the screen.
2.
Press the ADJ+/ADJ- button to select the Configuration menu
and then press ENTER button.
：OK
3.
Press the ADJ+/ADJ- button to select the Language option
under the Configuration menu and then press the ENTER
CONFIGURATION
LANGUAGE
COMPONENT INPUT
RGB SOURCE
DB15 SOURCE
COLOR SYSTEM
EXIT MENU
SELECT ITEM
CONFIGURATION
LANGUAGE
COMPONENT INPUT
RGB SOURCE
DB15 SOURCE
COLOR SYSTEM
EXIT MENU
: ADJUSTMENT
ENGLISH
YCBCR
NORMAL
GRAPHICS
AUTO
button (now the Language option glows red).
4.
Press the ADJ+/ADJ- button again to select the language you
desire. Then press the ENTER button to exit the Language
submenu.
：OK
ENGLISH
YCBCR
NORMAL
GRAPHICS
AUTO
：OK
16
Information Inquiry
You can obtain the information of the current PDP
input signal by using this function.
INFORMATION
1.
INPUT 1
VIDEO
interface on the screen.
INPUT 2
NONE
: SELECT MAIN MENU
Press the MENU button to display the menu operation
2.
：OK
Press the ADJ+/ADJ- button to select the Information menu.
The signal input information of the primary and secondary
pictures will be displayed on the screen.
17
TV Setup Operations
TV SETUP
USER CH
SYSTEM SETUP
CH MAPPING
CH FINE TUNE
AUTO FINE TUNE
MTS
V CHIP SETUP
C.C SETUP
EXIT MENU
10
User CH
+00
OFF
MONO
: SELECT MAIN MENU
TV SETUP
USER CH
SYSTEM SETUP
CH MAPPING
CH FINE TUNE
AUTO FINE TUNE
MTS
V CHIP SETUP
C.C SETUP
EXIT MENU
SELECT ITEM
：OK
+00
OFF
MONO
：OK
SYSTEM SETUP
COLOR SYSTEM
NTSC
SOUND SYSTEM
FREQUENCY TYPE
CABLE TV
EXIT MENU
SELECT ITEM
TV SETUP
USER CH
SYSTEM SETUP
CH MAPPING
CH FINE TUNE
AUTO FINE TUNE
MTS
V CHIP SETUP
C.C SETUP
EXIT MENU
SELECT ITEM
You can use your PDP in many different countries. Each country
has its own TV broadcast standard. You can select the TV system
you need in the TV Setting menu based on the TV standard of
your country.
：OK
+00
OFF
MONO
：OK
The user can setup the TV channels to a mode that he/she is more
familiar with.
CH Fine Tune/Auto Fine Tune
In some areas with weaker TV signals, you can use this function
to modify and correct the signal to obtain a better picture on the
screen.
1. Press the MENU button to display the menu operation
interface on the screen.
2. Press the ADJ+/ADJ- button to select the TV Setup menu and
then press ENTER button.
3. Press the ADJ+/ADJ- button to select the item you wish to
adjust and then press the ENTER button to enter the selected
item (now the item glows red).
4. Adjustment Item…
Press ADJ+/ADJ- …
System Setup
Select the item to adjust
（The adjusting method is the same as the menu operation.）
CH Fine Tune
Increase or decrease
Auto Fine Tune
On or off
MTS
Select “Mono”、 “Stereo”、“Sap”
V Chip Setup
The V-Chip reads information
encoded in the rated program and
blocks programs from the set based
upon the rating selected by the
parent.
C.C Setup
Setting the caption to turn on or off
5. If you are satisfied with the setup, press the ENTER button
again to complete the setup (the selected adjustment item
glows green again).
When you use the PDP’s TV function the first time, we
recommend channel scanning after selecting the required TV
system. This lets you to watch more and higher quality TV
programs.
If the signal is weaker in the area you live, we recommend you
use the auto channel scanning.
1. Press the MENU button to display the menu operation
interface on the screen.
2. Press the ADJ+/ADJ- button to select the TV Setup menu and
then press ENTER button.
3. Press the ADJ+/ADJ- button to select CH Mapping option
and then press ENTER button to enter the CH Mapping
adjustment item.
4. Press the ADJ+/ADJ- button again to select the Channel Scan
option and then press ENTER button. This item glows red.
5. Press the ADJ+/ADJ- button to select “on” and then press the
ENTER button. The system turns on the channel scanning
function.
18
RS232C Control
Application
Only use in factory.
Table of HDTV resolution supported.
H(KHz)
V(Hz)
Dot
clock
720*480
480p
31.54
60.08
27.00
1280*720
720p
45.00
60.00
74.25
1920*1080
1080i
33.75
30.00
74.25
19
Troubleshooting
If the picture quality is poor or there is some other problem, check the adjustments, operations, etc., before requesting
service.
Symptom
Checks
Picture appears but no sound is
Produced.
y Is the volume set at the minimum?
y Is the mute mode set?
y Are the speakers properly connected?
y Is AUDIO INPUT set correctly?
Poor picture with VIDEO signal
input.
y Improper control setting.
Local interference.
Cable interconnections.
Input impedance is not correct level.
Remedy
y Increase the volume.
y Press the remote control’s MUTE button.
y Connect the speakers properly.
y Set AUDIO INPUT on the SOUND menu
correctly.
y Adjust picture control as needed.
Try another location for the tv.
Be sure all connections are secure.
Specifications
Input Signals
Input Terminals
RGB
Video
DTV
Audio
RS232C control
Audio output
OSD Functions
Other features
Accessories
RGB, NTSC, PAL, HD*1, DVD*1, DTV*1
ANALOG RGB: 1 * mini D-sub 15-pin
DIGITAL RGB: 1 * DVI-D 29-pin
(Not compatible with analog input)
COMPOSITE VIDEO: 1 * RCA
S-Video: 1 * DIN 4-pin
COMPONENT VIDEO ( YCbCr ) 3 * RCA
COMPONENT VIDEO ( YPbRr ) 3 * RCA
Stereo RCA × 3(selectable)
D-sub 9-pin × 1
Internal 5W + 5W at 16 ohm / External (option) 10W + 10W at 8 ohm
Picture (Brightness / Contrast / Sharpness / Color / Tint / Color temperature),
Display (Position / Size / Picture mode / PIP setup / Clock / Focus / Auto focus),
Sound (Bass / Treble / Balance / Speaker / Audio 1 input / Audio 2 input / Audio 3 input &
output ),
Function (OSD / Power saving / White Screen / Reset),
Configuration (Language / Component input / RGB source / DB15 source / Color system),
Information (Main source / Second source)
TV setup(User ch / System setup / Ch mapping / Ch fine tune / MTS ./ V chip setup /
CC setup)
3D motion adaptive Scan Converter with 2-2 (50Hz), 2-3 (60Hz) Pull Down Converter,
AV cable, User’s Manual (about TV part )
20

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2004:05:05 12:31:58+08:00
Modify Date                     : 2004:05:05 12:31:58+08:00
Page Count                      : 20
Creation Date                   : 2004:05:05 04:31:58Z
Mod Date                        : 2004:05:05 04:31:58Z
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : kathy
Metadata Date                   : 2004:05:05 04:31:58Z
Creator                         : kathy
Title                           : Microsoft Word - PT4231-English-TV.doc

EXIF Metadata provided by EXIF.tools