TopSeed Technology TSAQ-901 rRF Flex Pointer - FSK User Manual AQ User manual

TopSeed Technology Corp. rRF Flex Pointer - FSK AQ User manual

users manual

Flex Pointer-TS/AQ User Manual How to use the remote: 1. Plug the receiver unit into any USB port. 1. Your operation system will start to setup the receiver unit. There is no software to load. (Win98/Me may show some dialog boxes during setup process. Press “Next” on all dialog boxes and then “finish”. During setup process, the O/S may ask you to put Win98 CD into the CD-ROM.) 2. After the setup process finish, the remote will work. Notice: 1-1. If the remote is not working or interference with another: ID Change : Press Both “ M “ and “ B ” buttons simultaneously more than 3 seconds will change the currend ID . (Green LED flashed) Pic.1 Pic.2 1-2. Use a paper clip to press the receiver unit red button (Stand by to learn the new ID)---Pic.2 1-3. Press any button except “M “ button to operate. (Let receiver unit learn the new ID). 2. If you remove the battery or the remote does not work, repeat the steps 1-1 to 1-3. 1
2 Symbo Key definition B Black Display a black screen or return to the slide show from a black screen Slide Forward Perform the next animation or advance to the next slide P Slide Back Perform the previous animation or return to the previous F5 F5/ESC F5: Running your slide show in full screen mode ESC:End a Slide show M Mode Key NOTE: 1. Remote Power ON/Off : In the remote ON mode , press and hold the “ M “ key and press “ F5 ” buttons more than 3 seconds the remote will be Power Off . (Green LED from on to off.) In the remote Off mode , Press and hold the “ M “ key and press “ F5 ” buttons more than 3 seconds the remote will be Power ON . (Green LED from off to on )
Federal Communications Commission (FCC) Requirements, Part 15 This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ---Reorient or relocate the receiving antenna. ---Increase the separation between the equipment and receiver. ---Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ---Consult the dealer or an experienced radio/TV technician for help. 3 CAUTION: Any changes of modifications not expressly approved by the grantee of this device could void the users authority to operate the equipment.

Navigation menu