TopSeed Technology TSAQ-901 rRF Flex Pointer - FSK User Manual AQ User manual

Download:
Mirror Download [FCC.gov]
Document ID	294994
Application ID	AI+tTnRz58SdQhbBfzVNcA==
Document Description	users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	4.04kB (50466 bits)
Date Submitted	2003-01-10 00:00:00
Date Available	2003-01-09 00:00:00
Creation Date	2002-11-29 11:51:07
Producing Software	Acrobat PDFWriter 4.0 for Windows NT
Document Lastmod	2003-01-06 15:27:13
Document Title	AQ-User-manual.PDF
Document Creator	AQ-User-manual - Microsoft Word
Document Author:	amenchi

Flex Pointer-TS/AQ User Manual
How to use the remote:
1. Plug the receiver unit into any USB port.
1. Your operation system will start to setup the receiver unit. There is no
software to load. (Win98/Me may show some dialog boxes during
setup process. Press “Next” on all dialog boxes and then “finish”.
During setup process, the O/S may ask you to put Win98 CD into the
CD- ROM.)
2. After the setup process finish, the remote will work.
Notice:
1-1. If the remote is not working or interference with another:
ID Change : Press Both “ M “ and “ B ” buttons simultaneously
more than 3 seconds will change the
currend ID . (Green LED flashed)
Pic.1
Pic.2
1-2. Use a paper clip to press the receiver unit red button (Stand by to
learn the new ID)---Pic.2
1-3. Press any button except “M “ button to operate. (Let receiver unit
learn the new ID).
2. If you remove the battery or the remote does not work, repeat the
steps 1-1 to 1-3.
Symbo
F5
Black
Key definition
Display a black screen or return to the slide show
from a black screen
Slide
Forward
Perform the next animation or advance to the
next slide
Slide Back
Perform the previous animation or return to the
previous
F5: Running your slide show in full screen mode
ESC:End a Slide show
F5/ESC
Mode Key
NOTE:
1. Remote Power ON/Off : In the remote ON mode ,
press and hold the “ M “ key and
press “ F5 ” buttons more than 3
seconds the remote will be Power
Off . (Green LED from on to off.)
In the remote Off mode ,
Press and hold the “ M “ key and
press “ F5 ” buttons more than 3
seconds the remote will be Power
ON . (Green LED from off to on )
Federal Communications Commission (FCC)
Requirements, Part 15
This equipment has been tested and found to comply with the
limits for a class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
---Reorient or relocate the receiving antenna.
---Increase the separation between the equipment and
receiver.
---Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
---Consult the dealer or an experienced radio/TV
technician for help.
CAUTION:
Any changes of modifications not expressly approved by the
grantee of this device could void the users authority to operate
the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2002:11:29 11:51:07Z
Modify Date                     : 2003:01:06 15:27:13+08:00
Page Count                      : 3
Has XFA                         : No
Creation Date                   : 2002:11:29 11:51:07Z
Author                          : amenchi
Producer                        : Acrobat PDFWriter 4.0 for Windows NT
Mod Date                        : 2003:01:06 15:27:13+08:00
Metadata Date                   : 2003:01:06 15:27:13+08:00
Title                           : AQ-User-manual.PDF
Creator                         : amenchi

EXIF Metadata provided by EXIF.tools