Toplink Technology Development TOPAP01 WIFI Module User Manual RA R111300A 5350
Shenzhen Toplink Technology Development CO.,LTD WIFI Module RA R111300A 5350
User Manual
User Manual Product Name: WIFI Module Model Name: TOP-AP01 TEL: FAX: Introduction The RT5350 SoC combines Ralinkâs IEEE 802.11b/g/n draft compliant 1T1R MAC/BBP/PA/RF, a high performance 360 MHz MIPS24KEc CPU core, a 5-port integrated 10/100 Ethernet switch/PHY and a USB host/device. With the RT5350, there are very few external components required for 2.4 GHz 802.11n wireless products. The RT5350 employs Ralinkâs 2nd generation 802.11n technologies for longer range and better throughput. The embedded, high performance CPU can easily manage advanced applications such as Wi-Fi data processing without overloading the host processor. In addition, the RT5350 offers a variety of hardware interfaces (SPI/I2S/I2C/PCM/UART/USB) to support a range of possible applications. Applications ÂiNICÂAP/Router Features ÂEmbedded1T1R2.4GCMOSRFÂMIPS24KEc360Mhzwith32KBIcache/16KBDcache ÂEmbedded802.11n1T1RMAC/BBPwithÂSupports16ͲbitSDRSDRAM(upto64MB) MLDenhancementÂSupportsbootfromROM,FLASH ÂEmbeddedPA/LNAÂUSB2.0HOST/Devicedualmodex1 Â150MbpsPHYdatarateÂEmbedded5Ͳport10/100MbpsEthernet Â20Mhz/40MHzchannelwidthswitchand5ͲportUTPPHY ÂLegacyandhighthroughoutmodesÂSupports510/100UTPports ÂCompressedblockACKÂSlowspeedI/O:GPIO,SPI,I2C,I2S,PCM, ÂBluetoothCoͲexistenceUART,andJTAG ÂMultipleBSSID(upto16)ÂPackagingandI/Ovoltage ÂWEP64/128,WPA,WPA2,WAPIenginesÂ12mmx12mmTFBGAͲ196package ÂQOSͲWMM,WMMPowerSaveÂI/O:3.3VI/O ÂHardwareframeaggregation ÂSupports802.11hTPC 2ă§Functional block diagram b/g/ b/g/ 3 General Specifications Model Name TOP-AP01-38pin/TOP-AP01-52pin Product Description Wireless AP/ROUTER Module WLAN Standard IEEE 802.11b/g/n ,Wi-Fi compliant Host Interface LAN/USB Major Chipset Ralink RT5350 Dimension 48 *30 *1MM Weight 42 *29 *1MM 10g Operating Conditions Voltage 3.3V +1.8V Temperature -10~55Í Humidity NonOperating 90% RH non-condensing (12 months among 0~40Í ) Electrical Specfications Frequency Range Transmission Distance Data Rate 2.412~2.462GHZ Transmit power 15.48dbm Data security Receiver Sensitivity 300m IEEE 802.11b: 1-11Mbps IEEE 802.11g: 6-54Mbps environment) IEEE 802.11n: MCS0-MCS7 WEP64/128, WPA,WPA2,WAPI 150M:-68dbm@10%PER 135M: -68dbm@10%PER 54M:-70dbm@10%PER 11M:-83dbm@10%PER 6M:-86dbm@10%PER 1M:-90dbm@10%PER Storage Temperature:-40~70Í (-40ÍŚ ~158ÍŚ ) Relative humidity:10%-90% Environment Non-condensing Storage Humidity:<10% RH Non-condensing Modulation Type OFDM/CCK/16-QAM/64-QAM 4. TEST PARAMETER Test item TX POWER EVM Freq ERR RX SENS Test result (54M) 14.75 dbm -30.67dbm 0.73 khz -70 dbm 5ă§Power Consumption 6. Mechanical Information Positive Negative TOP-AP01-38pin TOP-AP01-52pin TOP-APO1-38pin 7. PIN DEFINITION TOP-AP01-38pin 37 GND 38 AMCLK Note: the red oval tag is the UART serial port TX and UART RX two test points can be used as a serial port debugging use TOP-AP01-52pin 8 .Antenna And Interface Connection Information Interface and the antenna have the option about antenna and voltage support 9 .Product ordering information TOP-AP01 only support 802.11b/g/n, 3.3V and 1.8V voltage support And pls mark clearly your need information. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: o Reorient or relocate the receiving antenna. o Increase the separation between the equipment and receiver. o Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. o Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modi? cations to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference (2) this device must accept any interference received, including interference that may cause undesired operation. To comply with FCC RF exposure compliance requirements,this grant isapplicable to only mobile configurations. The antennas used for this transmittermust be installed to provide a separation distance of at least 20 cm from allpersons and must not be co-located or operating in conjunction with any otherantenna or transmitter.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0 (Windows) Create Date : 2015:04:23 16:57:34+08:00 Modify Date : 2015:04:23 16:57:34+08:00 Metadata Date : 2015:04:23 16:57:26+08:00 Creator Tool : PScript5.dll Version 5.2 Document ID : uuid:73CEEEC396E9E411AF68CEC5E5A8255A Instance ID : uuid:785fef3e-926a-4435-87dc-8b86195d690e Derived From Instance ID : uuid:dd58861b-67b9-4600-a3b9-277bdde48306 Derived From Document ID : uuid:c64a28e7-6297-4c92-a4fb-f9dd1c4157e9 Format : application/postscript Title : Microsoft Word - RA锛峎R111300A 5350.doc Creator : Administrator Page Count : 9 Author : AdministratorEXIF Metadata provided by EXIF.tools