TransCore M1010WBWW Tablet PC User Manual Part 1

TransCore Tablet PC Part 1

Contents

User Manual Part 1

Rugged Tablet ComputerUser's Manual2.0 M PGT101C
Copyright © 2012 All rights reserved.TRADEMARKSAll product names, trademarks or logos mentioned herein are the properties of their respective owners.Microsoft, Windows, and the Windows logo are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Microsoft products are licensed to OEMs by Microsoft Licensing, Inc., a wholly owned subsidiary of Microsoft Corporation.The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.All other brand and product names are trademarks or registered trademarks of their respective owners.NOTEDisplay images shown may vary slightly from actual display. Information in this manual is subject to change without notice.
iContentsCHAPTER 1: Getting Started ............................................................. 1-1Unpacking ........................................................................................1-2Optional Items ...........................................................................1-2Device Overview ..............................................................................1-3Front View ................................................................................. 1-3Rear View (Standard Model) ....................................................1-5Rear View (Expanded Model) ...................................................1-7Top and Bottom View ................................................................1-9Left and Right Views .................................................................1-10Installing the Stylus ..........................................................................1-11Removing the Stylus .................................................................1-11Installing the Memory Card ..............................................................1-12Removing the Memory Card .....................................................1-12Installing the SIM Card .....................................................................1-13Installing the Battery Pack ................................................................1-14Connecting to Network .....................................................................1-15Connecting to AC Power ..................................................................1-16Turning the Tablet Computer On and Off .........................................1-17Turning On ................................................................................1-17Turning Off ................................................................................1-18CHAPTER 2: Operating Your Tablet Computer ................................ 2-1Using the Touch Screen ...................................................................2-2Calibrating the Screen ..............................................................2-3Using the Input Panel .......................................................................2-4
iiOpening the Input Panel ...........................................................2-5Managing the Input Panel .........................................................2-5Using the Panel Keys .......................................................................2-6Adjusting Volume ......................................................................2-6Adjusting Screen Brightness .....................................................2-6Using Wireless LAN .........................................................................2-7Turning the Wireless Antenna On and Off ................................2-7Connecting to a Wireless Network ............................................2-8Using Bluetooth ................................................................................2-9Turning the Bluetooth Adapter On and Off ................................2-9Pairing with Bluetooth Devices .................................................2-9 .................................................2-12Using 3G Network ............................................................................2-13Connecting to 3G Network ........................................................2-13Using AirCard® Watcher ............................................................2-14® Watcher Settings .....................................2-16Using GPS ........................................................................................2-19Location ....................................................................................2-19Assistance ................................................................................2-20Using the Barcode Reader ...............................................................2-21Using SmartWedgeLite .............................................................2-22Pairing a Bluetooth Scanner .....................................................2-24Connecting an External Barcode Scanner ................................2-25Using the Fingerprint Reader ...........................................................2-27Using AuthenTec TrueSuite ......................................................2-27Setting Up Your Fingerprints .....................................................2-27Removing an Enrolled Fingerprint ............................................2-31Log On to Windows by Fingerprints ..........................................2-32CHAPTER 3: Connecting Your Tablet Computer ............................. 3-1Connecting USB Devices .................................................................3-2USB Port Connection ................................................................3-2Mini USB Port Connection ........................................................3-2Connecting HDMI Devices ...............................................................3-3Connecting Audio Devices ...............................................................3-4Connecting Serial Devices ...............................................................3-5
iiiCHAPTER 4: Managing Power .......................................................... 4-1Battery Pack .....................................................................................4-2Charging the Battery Pack ........................................................4-2Checking the Battery Level .......................................................4-3Replacing the Battery Pack ......................................................4-4Power Management .........................................................................4-6Power Saving Tips ............................................................................ 4-7CHAPTER 5: Expanding Your Tablet Computer .............................. 5-1Connecting the Docking Station .......................................................5-2Docking the Tablet Computer ...................................................5-2Installing the Expansion Module .......................................................5-3Installing the Extendable Battery Pack .............................................5-4Checking the Battery Level .......................................................5-5CHAPTER 6: Using BIOS Setup and System Recovery .................. 6-1BIOS Setup ......................................................................................6-2When to Use .............................................................................6-2Starting BIOS Setup Utility ........................................................6-2How to Use ...............................................................................6-3BIOS Menu ...............................................................................6-4APPENDIX A: Maintenance, Troubleshooting and   .....................................................................................A-1Taking Care of the Tablet Computer .................................................A-2Location Guidelines ..................................................................A-2General Guidelines ...................................................................A-2Cleaning Guidelines ..................................................................A-2Touchscreen Guidelines ...........................................................A-2Troubleshooting ................................................................................A-3 ........................................................A-5APPENDIX B: Regulatory Information .............................................. B-1Important Information .......................................................................B-2Safety Information (EN) ............................................................B-3Safety Information (FR) ............................................................B-4About the Batteries ...................................................................B-5
ivAbout the  Adapter ....................................................................B-5FCC Regulations ..............................................................................B-6RF Exposure Information (SAR)  ......................................................B-7IC Regulations ..................................................................................B-7Important Note ..........................................................................B-8
vPrefaceThis manual contains information that will help you operate this rugged Tablet Computer. It is divided into six chapters and two appendices. Chapter 1: Getting Started, takes you through the process of setting up your Tablet Computer and identifying its external components. Chapter 2: Operating Your Tablet Computer, tells you how to use the Tablet Computer’s components and features. Chapter 3: Connecting Your Tablet Computer, provides information on installing and using peripheral devices. Chapter 4: Managing Power, provides information on power management. Chapter 5: Expanding Your Tablet Computer, provides information on installing and using optional accessories, such as docking stations, expansion modules, etc. Chapter 6: Using BIOS Setup and System Recovery, describes the system recovery utility that reinstalls Windows to the Tablet Computer. Appendix Afor your Tablet Computer, and gives solutions to common problems you may encounter when using the Tablet Computer. Appendix B, provides regulatory information and safety notices on your Tablet Computer.
viNotational ConventionsThroughout this manual, the following conventions are used to distinguish elements of text.NOTE:CAUTION:Hardware and keyboard keys are shown in a bold typeset. For example:Press the F1 key to complete.A title, command, setup item, value, option, or button that you can see on the screen is shown in boldface. For example:Select When I press the power button, set it to Shut down, and then tap the Save changes button.
1-1Getting StartedCHAPTER 1Congratulations on purchasing this rugged Tablet Computer. The rugged design allows you to use it in harsh outdoor environments. You can use it under blazing heat, subzero cold, driving rain or dusty surroundings – places you could not take a consumer-grade Tablet Computer.This chapter tells you step by step how to get the Tablet Computer up and  Unpacking Device Overview (An Explanation of External Components and their Functions) Installing the Stylus Installing the SIM Card Installing Battery Packs and Connecting to AC Power Turning the Tablet Computer On and OffGetting Started
1-2 Getting StartedUnpackingInspect all items. If any item is damaged or missing, notify your dealer immediately. 2.0 MP  Keep the shipping carton and packaging materials in case you need to ship or store the Tablet Computer in the future.NOTE: Optional Items 
1-3Getting StartedDevice OverviewFront View2. 0 MP2678910113154No. Item Description1Barcode Scanner ButtonPress to activate the barcode scanner located on the top left corner of the Tablet Computer.2 Web Camera Use for video chatting and other interactive applications.3 Up Key On menu selection, moves the cursor up or increases a value.4 Down Key On menu selection, moves the cursor down or decreases a value.5LED Indicators Shows the current status of the Tablet Computer.Thermal  Lights up when the Tablet Computer temperature is too high.Wireless  Solid green: Wireless antenna is enabled. Off: Wireless antenna is disabled.Battery Blinking green: Battery is charging Solid greeen: Battery is fully charged. Blinking red: Battery power is low.
1-4 Getting StartedNo. Item Description5 Power  Solid green: Tablet computer is turned on Blinking green: Tablet computer is in sleep mode.  Off: Tablet computer is turned off.6 Ambient Light Sensor Adjusts the screen brightness according to the current ambient light.7 Microphone Use for chatting and other interactive applications. 8 Touch Screen Displays and receives information for the Tablet Computer.9 Left Key On menu selection, moves the cursor to the left or decreases a value.10 Right Key On menu selection, moves the cursor to the right or increases a value.11 Fingerprint Reader purposes.
1-5Getting StartedRear View (Standard Model)5.0MPAF515492 36678No. Item Description1 Speaker Sends out sound and voice from your Tablet Computer.2 Camera Flash camera.3 CMOS Camera Allows you to use the camera features.4 Expansion PortConnects to expansion modules, such as an RFID Reader, Smart  Card Reader, etc.Note:5 Battery Lock  Slide up to unlock the battery latch.  Slide down to lock the battery latch.6 Battery Latch Slide inward to latch the battery pack to the Tablet Computer. Slide outward to unlatch the battery pack from the Tablet Computer.7 Battery Pack Supplies power to your Tablet Computer when external power is not connected.
1-6 Getting StartedNo. Item Description8 Battery ButtonPress the button to light the battery status LEDs. The LEDs automatically go off after 5 seconds.9Battery Status LEDs Shows the battery capacity.  Battery fullBattery chargedBattery half chargedBattery low
1-7Getting StartedRear View (Expanded Model)7174102 38965No. Item Description1 Expansion Module Provides additional features for the Tablet Computer.2 Camera Flash camera.3 CMOS Camera Allows you to use the camera features.4 Expansion Module ScrewSecures the expansion module to the Tablet Computer.5 4G SIM Card Slot Stores a 4G SIM card which provides 4G data network capability to the Tablet Computer.6 Smart Card Reader Reads smart cards.7 Battery Screws Secures the extended battery pack to the Tablet Computer.8 Extended Battery Pack Supplies power to your Tablet Computer when external power is not connected.9 Battery ButtonPress the button to light the battery status LEDs. The LEDs automatically go off after 5 seconds.
1-8 Getting StartedNo. Item Description10 Battery Status LEDs Shows the battery capacity.  Battery fullBattery chargedBattery half chargedBattery low
1-9Getting StartedTop and Bottom View1 3Bottom ViewTop View4 5 6 72No. Item Description1 Audio Connector Connects to a set of headphones, external speakers, or an audio recording device.2 Antenna Receives and transmits wireless signals.WARNING: It is highly recommended not to use your Tablet Computer upside down.3 Barcode Reader Reads barcodes.4 SIM Card Slot Stores the SIM card which provides 3G data connection to your Tablet Computer.5 Docking Connector Connects to a docking station (optional).6 Stylus Holder Stores the stylus.7 Stylus Pull to release the stylus from the holder.
1-10 Getting StartedLeft and Right Views1Left View Right View234567No. Item Description1 Kensington Lock Provides lock mechanism security.2 Power Button   Short press to enable sleep mode. Long press to turn the Tablet Computer off.3USB Port Connects to a USB device, such as a USB Mini USB Port Connects to a USB device, such as a computer, printer, scanner, etc.HDMI Connector (Type D)Connects to an HDMI device such as an external monitor.4Power Connector Connects to the AC adapter.5Memory Card SlotStores the microSD card for additional storage.6 Ethernet Port Connects to a LAN jack for network connection.7 RS232 Port Connects to a serial device, such as a scanner, printer, etc.
1-11Getting StartedInstalling the StylusYour Tablet Computer comes with a stylus for use with the touch screen.The stylus holder at the bottom of the Tablet Computer provides a convenient place to store the stylus.Perform the following to prepare and install the stylus to your Tablet Computer:1.  Loop one end of the tether to the stylus eyelet.2.  Loop the other end of the tether to the Tablet Computer eyelet.213.  Insert the stylus into the stylus holder until it locks into place.Removing the StylusPull the stylus by its tab to remove it from the stylus holder.
1-12 Getting StartedInstalling the Memory Cardprovides additional storage space for the Tablet Computer.Perform the following to install a microSD card to your Tablet Computer:1.  On the right side of the Tablet Computer, open the memory card slot cover.2.  Insert the microSD card with the gold contacts facing down.3.  Push the microSD card until it clicks into place.4.  Close the SIM card slot cover.Removing the Memory Card1.  Perform Windows procedures on safely removing removable drives from the Tablet Computer.2.  On the right side of the Tablet Computer, open the memory card slot cover.3.  Push the microSD card to eject it from the slot.4.  Pull to remove the microSD card.
1-13Getting StartedInstalling the SIM CardThe Tablet Computer supports data connection using 3G SIM cards.Perform the following to install the SIM card to your Tablet Computer:1.  Make sure the Tablet Computer is turned off.2.  On the bottom side of the Tablet Computer, open the SIM card slot cover.3.  facing the front of the device.4.  Push the SIM card until it clicks into place.NOTE:   Removing the SIM Card1.  Turn the Tablet Computer off (see “Turning Off” on page 1-18).2.  On the bottom side of the Tablet Computer, open the SIM card slot cover.3.  Push the SIM card to eject it from the slot.4.  Pull to remove the SIM card.
1-14 Getting StartedInstalling the Battery PackPerform the following to install the battery pack to the Tablet Computer.1.  2.  From the bottom side of the battery pack, align and place the battery pack on its bay.3.  Slide the battery latches inward to the “close” position (A). 4.  For a more secured installation, slide the battery locks to the lock ( ) position (B).AB
1-15Getting StartedConnecting to NetworkThe Tablet Computer can connect to a local area network or the Internet via wired or wireless connection (see “Using Wireless LAN” on page 2-7). To connect the Tablet Computer via wired connection, perform the steps below:1.  On the right side of the Tablet Computer, open the network port cover.2.  Connect one end of an Ethernet cable to the Ethernet port of the Tablet Computer.3.  Connect the other end to a wall socket or a network hub.Network
1-16 Getting StartedConnecting to AC PowerThe Tablet Computer operates either on the external AC power or internal battery power. It is recommended to use AC power when you start up the Tablet CAUTION:Perform the following to connect the Tablet Computer to AC power:1.  On the left side of the Tablet Computer, open the power connector cover.2.  With the battery pack installed, plug the DC cord of the AC adapter into the power connector of the Tablet Computer.3.  Plug the female end of the AC power cord into the AC adapter.4.  Then plug the male end of the AC power cord into an electrical outlet.123When the AC adapter is connected, the battery pack is charging. The battery LED indicator ( ) shows shows three different states:  Blinking green: Battery is charging Solid greeen: Battery is fully charged. Blinking red: Battery power is low.
1-17Getting StartedCAUTION:   Turning the Tablet Computer On and OffTurning On1.  Make sure that the Tablet Computer is either connected to TouAC power or the battery pack is charged.2.  Press the power button ( ). Notice the screen remains blank for 8 ~ 10 seconds but the power LED lights up.The power LED indicator ( ) shows two different states: Solid green: Tablet computer is turned on Blinking green: Tablet computer is in sleep mode. Off: Tablet computer is turned off.
1-18 Getting StartedTurning OffTo turn off the Tablet Computer, use the “Shut Down” command of your operating system.CAUTION:shutting it down or leaving the Tablet Computer in Sleep or Hibernation mode:To stop in this mode...Do this...Off Use the Windows Start Menu and follow the shut down procedure.You can force the Tablet Computer to turn off by pressing and holding the power button ( ) for more than 6 seconds. This is not the recommended method, but may be necessary if the system is locked up.Hybrid Sleep Short press the power button ( ) or use the Windows Start Menu to put the Tablet Computer in Hybrid Sleep mode.Hibernation Use the Windows Start Menu to put the Tablet Computer in hibernation mode.Press the power button ( ) to resume or turn on the Tablet Computer from any of these modes. See “Power Management” on page 4-6 for more information.NOTE:-
2-1Operating Your Tablet ComputerCHAPTER 2This chapter provides information about the use of the Tablet Computer and describes the operating basics of these components and features: Touch Screen Input Panel Panel Keys Wireless LAN Features Bluetooth Features 3G Network Features GPS Features Camera Barcode Reader Fingerprint ReaderOperating Your Tablet  Computer
2-2 Operating Your Tablet ComputerUsing the Touch ScreenThe touch screen is a touch-sensitive device that allows you to control and make selections on the Tablet Computer by controlling the location of the pointer on the screen.CAUTION: 2. 0M PHere are some common terms that you should know when using the touch screen.Term ActionTap Tap gently on the touch screen to select or open an item. Tapping is the same as clicking the left mouse button of a PC.Double-tap Rapidly tap twice on the touch screen. This action is similar to double-clicking the left mouse button of a PC.Tap and hold Tap and hold the stylus lightly on the display. A big circle appears to indicate that a pop-up menu will soon appear. Lift up the stylus and a pop-up menu appears. Select the desired function. This action is similar to a right mouse click on a PC.Drag Hold the stylus on the screen and drag across the screen to select text and images or move icons to a new location.For a more customized stylus settings, go to Start > Control Panel > Pen and Touch.
2-3Operating Your Tablet ComputerCalibrating the ScreenWhen there is a noticeable discrepancy in the placement of the stylus on the screen and the indicated position of the onscreen pointer, recalibrate the screen.Perform the following to calibrate the screen:1.  Tap Start > Control Panel > Tablet PC Settings.2.  On the Display tab, tap Calibrate.3.  Tap the cross-hair with the stylus as it moves around the screen.4.  When calibration is complete, tap Yes to close the calibration utility screen.
2-4 Operating Your Tablet ComputerUsing the Input PanelThe Tablet Computer Input Panel is a virtual keyboard that allows you to enter text and perform various keyboard functions.There are two types of Input Panels for you to use: Touch Keyboard Allows you to enter text by tapping the keys with the stylus, like pressing the keys on a standard keyboard. Writing Pad Allows you to write on the writing pad, like writing on a piece of paper. Your handwriting will be converted into typed text.
2-5Operating Your Tablet ComputerOpening the Input PanelTo open the Input PanelFrom the left side of the screen, drag the edge of the Input Panel towards the center.To switch between keyboardsTo switch between the Touch Keyboard and the Writing Pad, tap   or   at the upper left corner of the Input Panel.Managing the Input PanelTo change the Input Panel sizeTo increase the size of the Input Panel, select  the lower right corner of the Input Panel and drag. To position the Input Panelto an area on the screen, place the stylus on the title bar and drag the Input Panel to a new location on the screen.To dock the Input PanelYou can dock the Input Panel to so that it is anchored at the top or the bottom of the screen. On the Input Panel, tap Tools > Docking, and tap Dock at top of screen or Dock at bottom of screen.NOTE: 
2-6 Operating Your Tablet ComputerUsing the Panel KeysThe Panel Keys provide shortcuts for you to utilize the functions of your Tablet Computer, such as adjusting the brightness setting or volume, and others.Adjusting VolumePeform the following to adjust the volume of your Tablet Computer:  Adjusting Screen BrightnessPeform the following to adjust the screen brightness of your Tablet Computer:  
2-7Operating Your Tablet ComputerUsing Wireless LANYour Tablet Computer has a built-in wireless antenna which automatically detects wireless networks that are within range. It takes approximately 30 seconds for your Tablet Computer to make a successful wireless connection and approximately 10 seconds to disconnect.WARNING: It is highly recommended not to use your Tablet Computer upside down.Turning the Wireless Antenna On and OffBy default, the wireless antenna is turned on. In case you need to turn the wireless antenna on or off, perform the following:1.  Tap Start > Control Panel > Windows Mobility Center.2.  To turn the wireless antenna on or off, tap Turn wireless on or Turn wireless off.
2-8 Operating Your Tablet ComputerConnecting to a Wireless NetworkPerform the following to connect to a wireless network:1.  green and the Wireless network icon on the taskbar shows  ).2.  Tap the Wireless Network icon ( ) on the taskbar.3.  In the list of available networks, tap a network.4.  Tap Connect.5.  If the network requires authentication, enter the security key or passphrase.NOTE:   
2-9Operating Your Tablet ComputerUsing BluetoothYour Tablet Computer has integrated Bluetooth capability for short-range wireless communication between Bluetooth-enabled devices.By default, the Bluetooth feature is enabled as indicated by the Bluetooth icon () on the taskbar; but your Tablet Computer is not visible to other devices. To make your Tablet Computer visible, check the Discovery box in Bluetooth Turning the Bluetooth Adapter On and OffIn case you need to turn the Bluetooth adapter on or off, perform the following:1.  Tap the Bluetooth On ( ) or Bluetooth off (  off) icon on the taskbar.2.  A pop up menu appears. Tap Turn adapter on or Turn adapter off.NOTE: Start > Devices and PrintersDevicesBlue-tooth settingsOKPairing with Bluetooth DevicesTo add and pair a Bluetooth devicePerform the following to pair your Tablet Compuer with Bluetooth devices:1.  Make sure the Bluetooth adapter is on as indicated by the Bluetooth icon  () on the taskbar.2.  Tap the Bluetooth icon ( ) to display a pop up menu.
2-10 Operating Your Tablet Computer3.  Tap Add a Device. The Tablet Computer will scan for Bluetooth devices within range.4.  Tap the device you want to pair with, then tap Next.5.  Depending on the device you are pairing, you may be prompted to enter or verify the pairing code. The pairing code entered or shown on your Tablet Computer and the Bluetooth device must be the same. Click Next to continue.
2-11Operating Your Tablet Computer6.  Windows will check for the device driver and install, if necessary. Tap Close to close the screen.Depending on the paired Bluetooth device, you may use your Tablet Computer more.NOTE: To reconnect to a Bluetooth deviceOnce a Bluetooth device has been paired with your Tablet Computer, you do not To reconnect to a Bluetooth device, perform the following:1.  Make sure the Bluetooth adapter is on as indicated by the Bluetooth icon  () on the taskbar.2.  Tap the Bluetooth icon ( ) to display a pop up menu.3.  Tap Show Bluetooth Devices.
2-12 Operating Your Tablet Computer4.  Tap and hold the Bluetooth device to display the pop up menu.5.  Tap Advance Operation, then tap the applicable connection operation.When a Bluetooth device wants to pair with your Tablet Computer, a pop up message appears on the taskbar, tap the message to pair with the device.Bluetooth devices, sync data, and other options. To access the settings, tap and hold the Bluetooth icon ( ) on the taskbar, and tap Open Settings.
2-13Operating Your Tablet ComputerUsing 3G NetworkYour Tablet Computer has 3G network capabilities that provide wireless connection to the Internet using a SIM card with data subscription.Connecting to 3G NetworkYour Tablet Computer comes with Sierra Wireless AirCard® Watcher, an application that allows you to connect to the Internet using your SIM card and keeps you informed of your wireless connection status. Perform the following to connect to your 3G network:1.  Install a SIM card to your Tablet Computer (see “Installing the SIM Card” on page 1-13).2.  Open the AirCard® Watcher application (tap Start > All Programs > Sierra Wireless > AirCard Watcher).The application detects the SIM card and displays network information on the AirCard® Watcher main screen.TIP: ®® 3.  Tap Connect to connect to the 3G network.Once connected, the AirCard® Watcher main screen displays the network connection information, such as signal strength, connection speed, and bitrate transfer. For more information on using the application, see “Using AirCard® Watcher” on page 2-14.
2-14 Operating Your Tablet ComputerUsing AirCard® WatcherThe AirCard® Watcher main screen1289341056117No. Item Description1 3G On/Off  Green: 3G network is on. Red: 3G network is off. Signal Strength   Green: Indicate the network signal strength. More lit bars indicate stronger signal.  Red: No signal. Network Type  Indicates the network connection type.2 Toolbar Tap an icon to access the function. Tap to view and modify wireless network  SMS Tap to open SMS Express to send and receive SMS messages on your Tablet Computer.NOTE:  History Tap to view the usage history and clear the bitrate counters. Airplane Mode Tap to enable airplane mode. When this feature is enabled, the icon turns red. Tap the icon again or tap Turn Radio On to disable airplane mode.
2-15Operating Your Tablet ComputerNo. Item Description2 AirCard GPS Tap to open AirCard GPS Monitor. Settings Tap to access the AirCard® Watcher settings. on page 2-16. Help 3 Network Name Displays the name of the SIM card network provider.4Data Transfer Rate Displays the upstream and downstream transfer information.5 Home Tap to open the Sierra Wireless website.6 Speed Graph Tap to display a graphical table of the data transfer speed.7 Menu Tap to access the application menu. Minimize Tap to minimize the application to the system tray. Restore Tap to toggle the display between full view and compact view. Close8 Connect / Disconnect ButtonTap to connect or disconnect from the 3G network.9Network Info A graphical display of the network connection type.10 Speed Indicates the network connection speed.11  Customer Support Tap to open Sierra Wireless support website.
2-16 Operating Your Tablet Computer® Watcher SettingsOn the AirCard® Watcher main screen, tap the Settings ( ) icon to display the screen below.Tap a menu item on the left panel to display the corresponding settings on the right. The following menus are available:Menu DescriptionGeneral messages, display properties, and others.Messaging Network SIM Settings Enables SIM security settings.Sounds Enables sound alert when network is connected, disconnected or when a new message is received. page 2-17.Data Usage Tracking subscription rate plan settings. This feature is useful when you have limited data rate plan to help you monitor and control your Internet usage.Firmware 
2-17Operating Your Tablet Computer(APN), TCP/IP settings, and more. You can also set AirCard® Watcher to automatically connect to the 3G network at startup.1.  On the AirCard® ) icon.NOTE:   2.  On the  menu, the following items are displayed: : Displays the name of your 3G network. Autoconnect Never: Do not auto-connect to network. While not roaming: Automatically connects to network while within the local network coverage. Always (even when roaming): Automatically connects to network even when roaming outside the local network coverage.NOTE:  Auto-createusing a new SIM card. Auto-selectthe current SIM.3.  Tap Apply to save the settings.
2-18 Operating Your Tablet Computer4.  To view the SIM card information, tap the network name on the left panel.5.  Tap OK to close the screen.
2-19Operating Your Tablet ComputerUsing GPSYour Tablet Computer has a GPS (Global Positioning System) receiver module built in and includes the u-blox GPS Location Sensors software.u-blox GPS Location Sensors is an application that allows you to manage the following: Location Assistance Satellites To open u-blox GPS Location Sensors, tap Start > All Programs > u-blox > u-tray > u-tray 1.1.0.4LocationThe Location tab provides an overview your location and system status.
2-20 Operating Your Tablet ComputerAssistanceThe Assistance tab allows you to set the schedule and download assistance data.  To download update manually, tap Download Assistance Data. To set automatic download, check the Automatic box and select the frequency of automatic download in .

Navigation menu