Transact Campus SE3100X006 Card Reader User Manual 1291 SE3RDR100 Install DRAFTf
Blackboard Inc. Card Reader 1291 SE3RDR100 Install DRAFTf
Contents
- 1. User Manual 1
- 2. User manual 2
User Manual 1
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1213148 |
| Application ID | mv764rvcteJjq1FUcpi42g== |
| Document Description | User Manual 1 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 55.47kB (693365 bits) |
| Date Submitted | 2009-12-14 00:00:00 |
| Date Available | 2009-12-14 00:00:00 |
| Creation Date | 2009-11-25 14:33:17 |
| Producing Software | PDFlib 3.03 (Win32) |
| Document Lastmod | 2009-11-30 16:04:04 |
| Document Title | 1291_SE3RDR100_Install_DRAFTf.pdf |
| Document Creator | Win2PDF http://www.daneprairie.com |
| Document Author: | tmattson |
Contents 2 SE3-RDR100 INSTALLATION GUIDE Install the SE3-RDR100 Surface Mount the SE3-RDR100 Single Gang Box Mount the SE3-RDR100 Remove the SE3-RDR100 10 Specifications PRINTED NOVEMBER 24, 2009 Figures Figure 1-1 Figure 1-2 Figure 1-3 Figure 1-4 Figure 1-5 Figure 1-6 Figure 1-7 Figure 1-8 Figure 1-9 Figure 1-10 SE3-RDR100 Reader.................................................................................2 Mounting Drill Pattern.................................................................................3 Mounting Plate Installation - Mullion...........................................................4 Mounting Plate Installation - Surface Mount...............................................5 Mullion Installation......................................................................................5 Single Gang Box Mount Assembly.............................................................6 Mounting Plate Installation - Gang Box Mount ...........................................7 Single Gang Box Mount .............................................................................7 SE3-RDR100 Wiring ..................................................................................8 SE3-RDR100 Mounting Removal...............................................................9 PRINTED NOVEMBER 24, 2009 II SE 3 - RD R1 0 0 I NSTALLATION GUIDE DOCUMENT 1 29 1 REV 01 Blackboard Inc. SE3-RDR100 Tested To Comply With FCC Standards FOR HOME OR OFFICE USE This Class B digital apparatus complies with Canadian ICES-003 Cet appareill numĂŠrique de la classes B est conform Ă la norme NMB-003 du Canada This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Part 15.21: Changes or modifications not expressly approved by the party responsible for complianc rity to operate the equipment. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. This equipment complies with the FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. PRINTED NOVEMBER 24, 2009 1-1 S E3 -R D R 100 I N S TA L L A T IO N G U ID E The Blackboard SE3-RDR100 is a Door Access Reader that supports contactless card technology. Contactless Card Technology offers the following advantages vs. magnetic stripe: virtually eliminates reader wear and tear (card need not contact the reader) Figure 1-1 SE3-RDR100 Reader The SE3-RDR100 Card Reader may be mounted or a single gang box using the included backing plate. The following items are included with the SE3-RDR100: PRINTED NOVEMBER 24, 2009 1-2 SE 3 - RD R1 0 0 I NSTALLATION GUIDE D OCUMENT 1 29 1 REV 01 I NSTALL THE SE3-RDR100 UL Considerations: Attention to Installers: All field wiring/cabling connections made to the Controller need to use shielded cable with one of the shielded ends connected to earth ground. Surface Mount the SE3-RDR100 (page 1-3) Single Gang Box Mount the SE3-RDR100 (page 1-6) The mounting plate is secured using #6 flat head hardware. Select hardware based on the mounting material. To surface mount the SE3-RDR100 Use the mounting plate as a template to mark mounting holes and a cable routing hole. Drill the holes for the mounting hardware (#6 flathead screws) and the cable. Figure 1-2 Mounting Drill Pattern PRINTED NOVEMBER 24, 2009 1-3 INSTALL THE SE 3 - RDR 1 0 0 Secure the mounting plate with the chosen hardware. Figure 1-3 Mounting Plate Installation - Mullion Pull the cable through the hole, and then wire to the 5-pin terminal block. SE3-RDR100 Wiring Plug the terminal block onto the SE3-RDR100. Place SE3-RDR100 at an angle over the mounting plate, and then slide down to engage the clip onto the mounting plate notch. PRINTED NOVEMBER 24, 2009 1-4 SE 3 - RD R1 0 0 I NSTALLATION GUIDE D OCUMENT 1 29 1 REV 01 Figure 1-4 Mounting Plate Installation - Surface Mount Push the bottom of the reader onto the mounting plate to lock the unit to the plate. Figure 1-5 Mullion Installation Test the SE3-RDR100 for proper operation. Optionally secure the reader to the mounting plate using the security screw supplied in the hardware kit. 10 Apply the Security Screw Cover Decal. PRINTED NOVEMBER 24, 2009 1-5 INSTALL THE SE 3 - RDR 1 0 0 To mount the SE3-RDR100 onto a single gang box Secure the backing and mounting plates with the appropriate hardware to the single gang box. Figure 1-6 Single Gang Box Mount Assembly Pull cable through mounting plate, and then connect to 5-pin terminal block, see: SE3-RDR100 Wiring (page 1-8). Plug the terminal block onto the SE3-RDR100. Place SE3-RDR100 at an angle over the mounting plate, and then slide down to engage the clip onto the mounting plate notch. PRINTED NOVEMBER 24, 2009 1-6 SE 3 - RD R1 0 0 I NSTALLATION GUIDE D OCUMENT 1 29 1 REV 01 Figure 1-7 Mounting Plate Installation - Gang Box Mount Push the bottom of the SE3-RDR100 onto the mounting plate to lock the unit to the plate. Figure 1-8 Single Gang Box Mount Test the reader for proper operation. Optionally secure the reader to the mounting plate using the security screw supplied in the hardware kit. Apply the Security Screw Cover Decal. PRINTED NOVEMBER 24, 2009 1-7 INSTALL THE SE 3 - RDR 1 0 0 Jumper wire between PINS 1 & 5 Figure 1-9 SE3-RDR100 Wiring PRINTED NOVEMBER 24, 2009 1-8 REMOVE THE SE 3 - RDR 1 0 0 R EMOVE THE SE3-RDR100 To remove the SE3-RDR100 from its mounting If a security screw is installed, remove the Security Screw Cover Decal. Insert the SE3-RDR100 key into the bottom slots. Gently pull the bottom of the reader at an angle over the mounting plate, and then slide up to disengage the clip from the mounting plate. Disconnect the terminal block. Remove the wall plate from the mounting if needed. Figure 1-10 SE3-RDR100 Mounting Removal PRINTED NOVEMBER 24, 2009 1-9 SPECIFICATIONS SPECIFICATIONS Physical Size: Weight: 0.30 lbs Input Power: 12VDC 150mA, 1.8 Watts Maximum Operating: Temperature: -20 to 60+ degrees Celsius Relative Humidity: 0 to 95 percent, non-condensing Altitude: 0 - 10,000 feet Non-Operating: Temperature: -20 to +70 degrees Celsius Relative Humidity: 0 to 95 percent, non-condensing Altitude: 0 - 35,000 feet This device contains an integrated lithium battery (BR2032). There is a risk of fire if the battery is replaced with an incorrect type. Proper disposal of a used battery is essential. PRINTED NOVEMBER 24, 2009 1-10
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Author : tmattson Create Date : 2009:11:25 14:33:17Z Modify Date : 2009:11:30 16:04:04-07:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Format : application/pdf Creator : tmattson Title : 1291_SE3RDR100_Install_DRAFTf.pdf Creator Tool : Win2PDF http://www.daneprairie.com Metadata Date : 2009:11:30 16:04:04-07:00 Producer : PDFlib 3.03 (Win32) Document ID : uuid:b83b196f-5afc-4ad3-9d6c-0f4c288df655 Instance ID : uuid:194c8ecb-99d2-4d39-ac3e-52a2219c17b3 Page Count : 13EXIF Metadata provided by EXIF.tools