Transtek Medical Electronics LS401-E01 DIGITAL PEDOMETER User Manual

Guangdong Transtek Medical Electronics Co.,Ltd DIGITAL PEDOMETER Users Manual

User Manual

LS401-E
Button Indicator light Charging dotProduct structure Before using1 Install the bridge. Please refer to the bridge instruction manual. (If already install the bridge, skip the steps.)2 Register the account and add the members. 1) Please enter into www.lifesense.com, make the free account.(If already have the account please skip the steps.)
2) Register the family account. 3) RAdd a family member.
4) Select program. 3 Add the device.1) Click the device and add the device.
2) Input the serial No. 3) Add the user.
4) Activate the device. 5) wait for activation.
5) Successfully add.1) Put the pedometer into the charging plate.2) Charging with the usb cable linked to the pc. It finishes in around 1.5 hours, and shows all the indicator lights.4 Battery charging.Successfully add!The page will be automatically closed in 3 second
1) Device should be less than 1 meter away from the bridge.2) Long press the button for 5 sec.3) Successfully activated after it shows you 6 green indicator lights.5 Product’s activation.1 Measurement and data sending.1) Log in health care center and set a week target.Usage
4 Go to www.lifesense.com to check how many step you finished.Attention: if you change an user, please long press activation button.2 Measure your step wherever you want.3 Automatically transmit the data to the server when the pedometer is close enough to the bridge.
Cautions1) Daily target check Press the button, how many lights you see means how fulfill how many day’s task.2) Weekly target check Press the button after you see the green lights, then you will see orange lights, how many of them you see means how many week task you finish.3) Power Inquires Press the button when it shows the orange indication light. How many red lights you see means how much power the blood pressure monitor has.4 orange lights are on and the fifth is flickering, it means you finish 4/7 for the weekly task.(all green lights show, it means you finish the daily task.)it shows 3 red light, that means, you have 3/7 battery left.5 Target and battery margin check.In order to avoid others being hurt by the product and extend its lifetime, please obey the following cautions.Symbol MeaningGeneral IndicationForbidendon't disassemble
About recharging About usageProduct maintenanceAfter recharging 2-3 times, the performance can be perfect Please take the pedometer as mentionedDon’t use the pedometer where it is in strong radiation which would influence the accuracyData can be saved for 30 days before transmittedPlease don’t disassemble the product if you are not professionalPut the product where it is dry and coolPut the product on a level table when you don’t use itDon’t disassemble the product after you abandon it, and obey city’s rule of environmentBattery duration: 13 daysDuring charging, it’s normal if the product is a little feverCharging within 0-40 celsius degreeAll green lights shows if it finishes chargingThe recharger is only for LS401-E pedometreDon’t store the recharger in a hot or wet placeDon’t disassemble the product yourself
1 Use tissue to clean the dirt on the pedometer.2 Dry the pedometer after clean it with soaped wiping.Clean
Cautions PhenomenonNo indicator lightFail activationReasonLow batteryinterferenceNo accountActivate too many products at the same timeWeak signal to the serverMethodsRechargingKeep closer to the bridgeFail data uploadingProduct can not be rechargedFail display on weekly target and ledOut of transmitting rangeIncreasing steps are less than 100Network errorSync the pedometer with the serverManually input the dataError of usb plugWrongly put the pedometer into the charger baseMake it more than 100Move the products towards to the bridge. Data can be transmitted in 30m without barrier.Check network statusLog on the health care systemChange usb plugRe- put it as instructionCheck connection between the bridge and pedometerLog on www.lifesense.com for settingDo it one by oneCheck network status
Product SpecificationItemsProduct NameVoltageRechargingDisplayStepsCaloriesBattery gradeBattery releasingContentDC 5.0V, standard usb plug7 led lights0-99999 steps, division 1 step0- 9999.9k calories, division 0.1k calories1-7 grade, division: 1 grade≥500 times45mAh Lipolymer batteryBattery lifeData capacityTransmitting rangeDimension13 days once rechargingData of 30 days30 meters (in open place)60x44.7x11.3mmPedometer LS401-EWorking ConditionStorage and Transportation ConditionTemperature: 0~40℃；Humidity：≤90% RHTemperature: -20-60℃；Humidity：≤90% RHThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turningthe equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:—Reorient or relocate the receiving antenna.—Increase the separation between the equipment and receiver.27 28—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.—Consult the dealer or an experienced radio/TV technician for help.

Navigation menu