Transtek Medical Electronics LS401-E01 DIGITAL PEDOMETER User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1880463
Application ID	ab7gJm87eub0me4b5blk7Q==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	132.65kB (1658150 bits)
Date Submitted	2013-01-16 00:00:00
Date Available	2013-01-16 00:00:00
Creation Date	2012-09-19 16:29:27
Producing Software	Adobe PDF library 9.90
Document Lastmod	2012-11-01 16:38:58
Document Title	Users Manual
Document Creator	Adobe Illustrator CS5

LS401-E
Before using
Product structure
1 Install the bridge. Please refer to the bridge instruction manual.
(If already install the bridge, skip the steps.)
2 Register the account and add the members.
(If already have the account please skip the steps.)
1) Please enter into www.lifesense.com, make the free account.
Button
Indicator light
Charging dot
2) Register the family account.
3) RAdd a family member.
4) Select program.
3 Add the device.
1) Click the device and add the device.
2) Input the serial No.
3) Add the user.
4) Activate the device.
5) wait for activation.
4 Battery charging.
5) Successfully add.
Successfully add!
The page will be automatically closed in 3 second
1) Put the pedometer into the
charging plate.
2) Charging with the usb cable linked to the
pc. It finishes in around 1.5 hours, and
shows all the indicator lights.
Usage
5 Product’s activation.
1) Device should be less than
1 meter away from the bridge.
2) Long press the button
for 5 sec.
3) Successfully activated after
it shows you 6 green
indicator lights.
1 Measurement and data sending.
1) Log in health care center
and set a week target.
4 Go to www.lifesense.com to check how many step you finished.
2 Measure your step
wherever you want.
3 Automatically transmit the
data to the server when the
pedometer is close enough
to the bridge.
Attention: if you change an user, please long press activation button.
5 Target and battery margin check.
Cautions
1) Daily target check
Press the button, how many lights you see
means how fulfill how many day’s task.
In order to avoid others being hurt by the product and extend its lifetime, please obey
the following cautions.
2) Weekly target check
Press the button after you see the green
lights, then you will see orange lights,
how many of them you see means how
many week task you finish.
3) Power Inquires
Press the button when it shows the
orange indication light. How many red
lights you see means how much power
the blood pressure monitor has.
(all green lights show, it means you
finish the daily task.)
4 orange lights are on and the fifth
is flickering, it means you finish 4/7
for the weekly task.
Symbol Meaning
General Indication
Forbiden
don't disassemble
it shows 3 red light, that means,
you have 3/7 battery left.
About recharging
About usage
After recharging 2-3 times, the performance can be perfect
Please take the pedometer as mentioned
Battery duration: 13 days
Don’t use the pedometer where it is in strong radiation
which would influence the accuracy
During charging, it’s normal if the product is a little fever
Data can be saved for 30 days before transmitted
Charging within 0-40 celsius degree
Please don’t disassemble the product if you are not professional
All green lights shows if it finishes charging
The recharger is only for LS401-E pedometre
Don’t store the recharger in a hot or wet place
Don’t disassemble the product yourself
Product maintenance
Put the product where it is dry and cool
Put the product on a level table when you don’t use it
Don’t disassemble the product after you abandon it,
and obey city’s rule of environment
Clean
1 Use tissue to clean the dirt on
the pedometer.
2 Dry the pedometer after clean it with soaped wiping.
Cautions
Phenomenon
No indicator light
Fail activation
Reason
Methods
Low battery
Recharging
interference
Keep closer to the bridge
No account
Log on www.lifesense.com
for setting
Activate too many products
at the same time
Do it one by one
Weak signal to the server
Check network status
Out of transmitting range
Fail data uploading
Fail display on weekly
target and led
Product can not
be recharged
Move the products towards to
the bridge. Data can be transmitted
in 30m without barrier.
Increasing steps are less than 100 Make it more than 100
Network error
Check network status
Sync the pedometer with the server
Check connection between
the bridge and pedometer
Manually input the data
Log on the health care system
Error of usb plug
Change usb plug
Wrongly put the pedometer
into the charger base
Re- put it as instruction
Product Specification
Items
Product Name
Voltage
Recharging
Display
Steps
Calories
Battery grade
Battery releasing
Content
Battery life
13 days once recharging
Pedometer LS401-E
Data capacity
Data of 30 days
45mAh Lipolymer battery
Transmitting range
30 meters (in open place)
DC 5.0V, standard usb plug
Dimension
60x44.7x11.3mm
7 led lights
Working Condition
Temperature: 0~40℃；Humidity：≤90% RH
0-99999 steps, division 1 step
Storage and
Transportation Condition
Temperature: -20-60℃；Humidity：≤90% RH
0- 9999.9k calories, division 0.1k calories
1-7 grade, division: 1 grade
≥500 times
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Caution: The user is cautioned that changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate the equipment.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
—Consult the dealer or an experienced radio/TV technician for help.
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
27
28

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.0-c060 61.134777, 2010/02/12-17:32:00
Format                          : application/pdf
Title                           : LS401计步器说明书
Metadata Date                   : 2012:11:01 16:38:58+08:00
Modify Date                     : 2012:11:01 16:38:58+08:00
Create Date                     : 2012:09:19 16:29:27+08:00
Creator Tool                    : Adobe Illustrator CS5
Thumbnail Width                 : 256
Thumbnail Height                : 152
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 9736 bytes, use -b option to extract)
Instance ID                     : uuid:ec288941-1b6f-44f8-8dff-4c9a203ab10f
Document ID                     : xmp.did:0084A5571F02E2118AFDC75EDAC8ADCE
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:7474e13b-4b63-49b5-8d95-dfe710e48e40
Derived From Document ID        : xmp.did:5E53639F255DE1118242C201DBE6EB94
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved, saved, saved
History Instance ID             : xmp.iid:9E8FDD704EF5E0119EE0F5B0C25D2A92, xmp.iid:A48FDD704EF5E0119EE0F5B0C25D2A92, xmp.iid:5E53639F255DE1118242C201DBE6EB94, xmp.iid:0084A5571F02E2118AFDC75EDAC8ADCE
History When                    : 2011:10:13 12:16:33+08:00, 2011:10:13 14:19:58+08:00, 2012:02:22 17:00:49+08:00, 2012:09:19 16:29:28+08:00
History Software Agent          : Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5
History Changed                 : /, /, /, /
Startup Profile                 : Print
Has Visible Overprint           : False
Has Visible Transparency        : False
N Pages                         : 1
Max Page Size W                 : 200.000195
Max Page Size H                 : 60.000472
Max Page Size Unit              : Millimeters
Font Name                       : ArialMT, FZLTHJW--GB1-0, AdobeSongStd-Light
Font Family                     : Arial, 方正兰亭黑简体, Adobe 宋体 Std
Font Face                       : Regular, Regular, L
Font Type                       : Open Type, TrueType, Open Type
Font Version                    : Version 3.00, 1.00, Version 5.010;PS 5.002;hotconv 1.0.57;makeotf.lib2.0.21895
Font Composite                  : False, False, False
Font File Name                  : ARIAL.TTF, 兰亭黑简.TTF, AdobeSongStd-Light.otf
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Group Name        : 鲜艳
Swatch Groups Group Type        : 1
Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Cyan    : 60.000002
Swatch Groups Colorants Magenta : 90.000004
Swatch Groups Colorants Yellow  : 0.003099
Swatch Groups Colorants Black   : 0.003099
Producer                        : Adobe PDF library 9.90
Page Count                      : 15
Creator                         : Adobe Illustrator CS5

EXIF Metadata provided by EXIF.tools