Transtek Medical Electronics LS502-E01 DATA BRIDGE User Manual

Guangdong Transtek Medical Electronics Co.,Ltd DATA BRIDGE Users Manual

USERS MANUAL

LS901-E
Product structurePower Adaptor Socket Broadband InterfaceWAN LightLAN Light Internet CablePower AdaptorReset Button
Before using1 Open Broadband Service2 Environmental Requirements of Area NetworkOpen standard broadband service,such as telecommunication, Great Wall, Unicom, RailcomPC automatically connect to the network via router, User can enter into base station installation steps directly.PC not connect to the network via router, User can buy a router, refer to the user manual to set up the router to autodial and connect to the network.Unable to distinguish whether PC connect to the network via router.1) Turn on PC, if PC automatically connect to the network, which indicates PC automatically connect to the network via router.(Please refer to )2) Turn on PC, if PC need to autodial to connect to the network, which indicates PC not connect to the network via router. (Please refer to )(Everytime connecting the network, if the screen display dail-up interface, which indicates PC not connect to the network via router)
Install data bridge1 Use power adaptor to connect power source and bridge.2 Use internet cable to connect bridge with LAN interface of the router.3 When WAN and LAN light on the bridge turns green, which indicates the connection is successful.To prevent the product hurting people during using and prolong product lifetime, please follow below rules.CautionSymbol MeaningAbout battery useDisassemble forbiddenRegular instructionForbiddenAvoid the water, dust and others on the adapter.When the surface of the adapter is broken, please do not use it.Please do not disassemble or repair the adapter without professional instruction.
Please keep your hands dry to install the data bridge.Data bridge will cache data due to network problem.Please turn off the power and network during a lightning storm.Data bridge only applies to Lifesense dedicated power adaptor, please don’t use other type.For unprofessional person, please don’t teardown it alone.Please put the data bridge at cool and dry place.Please don’t immerse in water or liquid.Product instructionAbout product daily maintenancePlease do not disassemble the products without professional people ‘s instruction.1 Using the wet clothing to remove the dirt on the product.2 Please put liquid soap on the cloth, and wring out it to wipe out the dirt on the surface, at the end pls use dry cloth to wipe.
1) If DHCP function on router was open, press reset button for a moment on bridge to make it reset to factory defaults2) If DHCP function on router wasn’t open, pls refer to IP setting up method on bridge (page 5)Trouble shootingSymptomPower connecting errorData bridge connect to the router is abnormal LAN lights up, WAN is shining Fault cause SolutionLAN and WAN light turns green, data was sucessfully sent from device, but not shown in health centerPC can enter the internet But bridge can’t enter the internetNot choose user for the devicePlease check the power connecting situation of the data bridgePlease add user in device management interfacePlease go to get the data from device management interface1) Please check the power connecting situation of the router2) Please check the connecting situation between bridge and routerTurn on power, LAN and WAN light is shiningTurn on power, LAN and WAN light is darkData can’t automatically distinguish the userAdvanced setting (Attention: only for user whose DHCP function on router wasn’t open)1 Press reset button, and hold it more than 5 seconds LAN and WAN light shining at the same time, pls loose the button.2 Connect bridge to PC by internet cable directly
3 Setting up the network on PC and save, pls refer to below image:5 If setting up is successful, below interface will shown.Bridge will reset and run automatically, setting begin to take effect.Please try to set again.6 If setting up is fail, below interface will shown:4 Open IE browser, put http://192.168.1.2/ into the address column, enter into the address, below interface will shown.If choose automatically get IP address, for DNS address we can choose automatically or manually put in.If choose manually put in IP address, for DNS address we have to manually put in accordingly.
SpecificationsSolution ParameterProduct nameProduct dimensionProduct WeightDisplayInternet cablePowerRF distanceMatch distanceLS901-E100 x 58 x 24mm62g2 green LED light1m, with RJ45 socketDC 5.0V≤30m≤1mNormal working conditionStorage & transportation conditionWorking atmospheric pressureStorage & transportation atmospheric pressureTemperature: Humidity: Temperature: Humidity: 80kPa ~ 105kPa80kPa ~ 105kPa
14 15This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turningthe equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:—Reorient or relocate the receiving antenna.—Increase the separation between the equipment and receiver.—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.—Consult the dealer or an experienced radio/TV technician for help.

Navigation menu