Transtek Medical Electronics LS901-E01 DIGITAL TAPE MEASURE User Manual tape user manual englishV5

Guangdong Transtek Medical Electronics Co.,Ltd DIGITAL TAPE MEASURE tape user manual englishV5

USERS MANUAL

version 1.0print date: 8/2012Digital Tape Meter LS502-E
1 2Device structure Before usingMeasure key Body measurementsWireless transmitInternet disconnectionLow battery indicatorMeasure valueUserSelect keyPower buttonCouplingTapeBattery coverData storeMeasurement1. Install the data bridge. Please refer to the data bridge instruction manual. (If data bridge is already installed, skip these steps.) 2. Register for an account at www.profileplan.net and click "Create Account". Follow the instructions on screen.
3 4Register device1. Log into your account at www.profileplan.net and choose "My Account" > "Devices."2. Enter your device’s serial number & click "Add Device."3. If successful, the device will display as "Active."4. See "Activate the Product" on the following pages if device does not display as synced.
5 6Install batteries Activate the deviceSlide off the battery cover according to the arrow direction. Install 2 AA batteries according to the marks in the battery compartment.Replace the battery cover.1. Bring the device within 3 feet of the data bridge.2. Press the power button for 5 seconds.
7 8Operating instructionsSee trouble shooting Move to next step1. Power up the unit, press the select key to cycle through the measurement location options2. Gently pull out the tape to start measuring. 3. Wrap selected body part with tape.4. Insert the plastic end of the tape into the coupling. Press the measure key to measure and store data. 3. The screen will appear. Wait for the screen to appear. If this screen does not display, see trouble shooting.
9 10CautionsSymbol meaning6. Log into www.profileplan.net to check the results or use the mobile app.5. The data, including those failed to be sent before, will be automatically sent to the data bridge. After the data is sent the unit will turn off automatically. If there is data failure the icon will display.To prevent the product from harming users and to prolong product life, please follow guidelines below.General instruction ForbiddenDisassembly is forbidden
11 12About battery use About the deviceAbout daily maintenance2 x AAA batteries are required for this product. Keep measuring at the same time of every day. For example, before you go to bed.Measure and check the data corresponding to the part you choose.Measure close to the body to avoid interference caused by clothing.Do not disassemble product if you’re not a professional.Please store in a cool, dry place.Place the product on the horizontal platform when not in useComply to the environmental rules when disposing of this product.If the product is not used for extended periods of time remove batteries. When you insert the batteries please make sure they are in the correct position.Do not heat the batteries or expose them to flame.Do not combine old and new batteries.Do not disassemble battery charger.
14131. Use a damp cloth to gently clean the device. 2. Dry the device after cleaning it.Cleaning
15 16Trouble shootingSymptomSolutionNo DisplayLow charge Install new batteriesWrong battery installationNetwork failure1. Wireless communication is interrupted2. The product is too far away from the data bridge during activationRe-activate the product within 3 feet of the data bridgeAlign polarity symbols (+/-)Reason/ CauseLCD error code
17 18Product is still not registered.LCD error codeWide Band failure. The data bridge’s WAN LED light flashesCheck the internet connectionLow batteryReplace the batteriesSymptomReason/ CauseSolutionWhen using the device, the LCD displaysGo to www.profileplan.net and delete the unused device or purchase a new data bridge.Register the device (see step 1)Data bridge limit of 16 devices has been reached
19 20The wireless communication between the product and data bridge is interruptedRe-measure, keeping the data bridge within 3 feet of the product.The system can't automatically identify the measurement data and exceeds the identification rangeCheck the network connection of the data bridgeSymptomSolutionWhen using the device, the LCD displaysWhen using the device the LCD displaysThe product is out of wireless transmission rangeReason/ Cause
21 22SpecificationsThe platform of the Health Center can't indicate the measurement data normally.Check network connectionSymptomSolutionItemProduct NameWhole SizeWeightPower SupplyDisplay ModeUnit of measureCapacityDivisionWorking ConditionStorage and Transportation Condition85 g (excluding batteries)2 x AAABlue film LCDInch 2.2 in min - 59 in max 0.1 inTemperature: 32 ~ 104 ºFTemperature: -4 ~ 140 ºFDigital Tape Meter LS502-E3 x 2.6 x 1.5 inchesParameterThe measurement data is near or over the identification range. The system can’t identifyGo into Device management > Product > Data authentication and assign the data manuallyWide Band failure. The data bridge’s WAN LED light flashesReason/ Cause
23 24This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turningthe equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:—Reorient or relocate the receiving antenna.—Increase the separation between the equipment and receiver.—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.—Consult the dealer or an experienced radio/TV technician for help.

Navigation menu