Transtek Medical Electronics LS901-E01 DIGITAL TAPE MEASURE User Manual tape user manual englishV5

Download:
Mirror Download [FCC.gov]
Document ID	1880378
Application ID	SFUqALXak5rMMFrzUlIOOw==
Document Description	USERS MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	200.89kB (2511095 bits)
Date Submitted	2013-01-16 00:00:00
Date Available	2013-01-16 00:00:00
Creation Date	2012-08-23 15:36:36
Producing Software	Adobe PDF library 9.90
Document Lastmod	2012-11-01 16:44:17
Document Title	tape-user-manual-englishV5
Document Creator	Adobe Illustrator CS5

version 1.0
Digital Tape Meter LS502-E
print date: 8/2012
Device structure
Before using
1. Install the data bridge. Please refer to the data bridge instruction
manual. (If data bridge is already installed, skip these steps.)
2. Register for an account at www.profileplan.net and click
"Create Account". Follow the instructions on screen.
Measure key
Body measurements
Select key
Data store
Power button
User
Coupling
Measurement
Tape
Internet disconnection
Battery cover
Low battery indicator
Wireless transmit
Measure value
Register device
1. Log into your account at www.profileplan.net and
choose "My Account" > "Devices."
2. Enter your device’s serial number & click "Add Device."
3. If successful, the device will display as "Active."
4. See "Activate the Product" on the following pages if
device does not display as synced.
Install batteries
Activate the device
1. Bring the device within 3 feet of the data bridge.
Slide off the battery cover
according to the arrow direction.
Install 2 AA batteries according to the
marks in the battery compartment.
2. Press the power button
Replace the battery cover.
for 5 seconds.
3. The screen
will appear. Wait for the screen
Operating instructions
to
1. Power up the unit, press the
select key
to cycle through
the measurement location options
appear. If this screen does not display, see trouble shooting.
2. Gently pull out the tape to start
measuring.
3. Wrap selected body part with tape.
See trouble shooting
4. Insert the plastic end of the tape into the
coupling. Press the measure key
to
measure and store data.
Move to next step
Cautions
5. The data, including those failed to be
sent before, will be automatically sent to
To prevent the product from harming users and to prolong
product life, please follow guidelines below.
the data bridge. After the data is sent the
unit will turn off automatically. If there is
data failure the icon
will display.
Symbol meaning
6. Log into www.profileplan.net to check
the results or use the mobile app.
General instruction
Forbidden
Disassembly is forbidden
10
About battery use
About the device
2 x AAA batteries are required for this product.
Keep measuring at the same time of every day. For
example, before you go to bed.
If the product is not used for extended periods of
time remove batteries.
Measure and check the data corresponding to the part you
choose.
Measure close to the body to avoid interference caused by
clothing.
When you insert the batteries please make
sure they are in the correct position.
Do not disassemble product if you’re not a professional.
Do not heat the batteries or expose them to
flame.
About daily maintenance
Do not combine old and new batteries.
Please store in a cool, dry place.
Do not disassemble battery charger.
Place the product on the horizontal platform when not
in use
Comply to the environmental rules when disposing of
this product.
11
12
Cleaning
1. Use a damp cloth to gently clean the device.
2. Dry the device after cleaning it.
13
14
Trouble shooting
LCD error code
No Display
Symptom
Reason/
Cause
Low charge
Solution
Wrong battery
installation
1. Wireless communication is
interrupted
2. The product is too far away from
the data bridge during activation
Install new batteries
Align polarity symbols (+/-)
Network failure
Re-activate the product within 3 feet of the data bridge
15
16
LCD error code
When using the device, the LCD displays
Symptom
Reason/
Cause
Product is still
not registered.
Solution
Register the
device
(see step 1)
Data bridge limit of 16 devices
has been reached
Go to www.profileplan.net and
delete the unused device or
purchase a new data bridge.
17
Wide Band failure. The data
bridge’s WAN LED light flashes
Low battery
Check the internet connection
Replace the batteries
18
When using the device the LCD displays
When using the device, the LCD displays
Symptom
Reason/
Cause
The wireless
communication between
the product and data
bridge is interrupted
Solution
Re-measure, keeping the data bridge within 3 feet
of the product.
The system can't automatically
identify the measurement data and
exceeds the identification range
The product is out of
wireless transmission
range
Check the network connection
of the data bridge
19
20
Specifications
Symptom
Reason/
Cause
The platform of the Health Center can't indicate
the measurement data normally.
The measurement data
is near or over the
identification range. The
system can’t identify
Item
Product Name
Whole Size
Wide Band failure.
The data bridge’s
WAN LED light
flashes
Weight
Power Supply
Display Mode
Solution
Go into Device
management > Product
> Data authentication
and assign the data
manually
Unit of measure
Capacity
Check network
connection
Division
21
Parameter
Digital Tape Meter LS502-E
3 x 2.6 x 1.5 inches
85 g (excluding batteries)
2 x AAA
Blue film LCD
Inch
2.2 in min - 59 in max
0.1 in
Working Condition
Temperature: 32 ~ 104 ºF
Storage and
Transportation Condition
Temperature: -4 ~ 140 ºF
22
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning
Caution: The user is cautioned that changes or modifications
not expressly approved by the party responsible for
compliance could void the user's authority to operate the
equipment.
the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and
receiver.
—Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician
for help.
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
23
24

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.0-c060 61.134777, 2010/02/12-17:32:00
Format                          : application/pdf
Title                           : tape-user-manual-englishV5
Metadata Date                   : 2012:11:01 16:44:17+08:00
Modify Date                     : 2012:11:01 16:44:17+08:00
Create Date                     : 2012:08:23 15:36:36-05:00
Creator Tool                    : Adobe Illustrator CS5
Thumbnail Width                 : 48
Thumbnail Height                : 256
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 4599 bytes, use -b option to extract)
Instance ID                     : uuid:209b723e-f282-4e07-be6b-38159f8823ca
Document ID                     : xmp.did:F17F1174072068118F62BB99187E5DFF
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:2027be1d-a3fe-514b-adce-33663404e4a3
Derived From Document ID        : xmp.did:0A80117407206811822A94D16ACBADA4
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved, saved
History Instance ID             : xmp.iid:23F6FECB1D05E111A641973000A3D321, xmp.iid:0A80117407206811822A94D16ACBADA4, xmp.iid:F17F1174072068118F62BB99187E5DFF
History When                    : 2011:11:02 16:27:58+08:00, 2012:08:23 15:18:14-05:00, 2012:08:23 15:36:31-05:00
History Software Agent          : Adobe Illustrator CS5, Adobe Illustrator CS6 (Macintosh), Adobe Illustrator CS5
History Changed                 : /, /, /
Manifest Link Form              : EmbedByReference
Manifest Reference File Path    : Profile_Plan_Setup.jpg
Startup Profile                 : Print
Has Visible Overprint           : False
Has Visible Transparency        : False
N Pages                         : 1
Max Page Size W                 : 4.724372
Max Page Size H                 : 2.362196
Max Page Size Unit              : Inches
Font Name                       : Arial-BoldMT, ArialMT, FZLTHJW--GB1-0
Font Family                     : Arial, Arial, 方正兰亭黑简体
Font Face                       : Bold, Regular, Regular
Font Type                       : Open Type, Open Type, TrueType
Font Version                    : Version 3.00, Version 3.00, 1.00
Font Composite                  : False, False, False
Font File Name                  : ARIALBD.TTF, ARIAL.TTF, 兰亭黑简.TTF
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Group Name        : 鲜艳
Swatch Groups Group Type        : 1
Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Cyan    : 60.000002
Swatch Groups Colorants Magenta : 90.000004
Swatch Groups Colorants Yellow  : 0.003099
Swatch Groups Colorants Black   : 0.003099
Producer                        : Adobe PDF library 9.90
Page Count                      : 13
Creator                         : Adobe Illustrator CS5

EXIF Metadata provided by EXIF.tools