Trimble 80350000A GSM/GPRS Modem Module User Manual 80350 Module rev1

Download:
Mirror Download [FCC.gov]
Document ID	1060416
Application ID	B+Y+crvJZ+g6Qxs+DjHXbA==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	76.51kB (956387 bits)
Date Submitted	2009-01-22 00:00:00
Date Available	2009-01-22 00:00:00
Creation Date	2008-11-26 08:55:20
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2008-11-26 08:55:20
Document Title	Microsoft Word - 80350 Module User Manual_rev1.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Zi xiaogang

80350 Module Integration Guide
The 80350 Module
Integration Guide
Version 0.02
Prepared by: Cros Fan
Bing Xu
Chester Liu
Checked by:
Dong-Ming Xia
Brian Pan
Yan-Jing Ji
Zheng-Bo Han
Approved by:
11/10/2008
Confidential
Page 1 of 53
80350 Module Integration Guide
Contents
SAFETY INFORMATION ................................................................................................................................................4
OVERVIEW........................................................................................................................................................................5
DOCUMENT HISTORY ...................................................................................................................................................5
REGULATORY COMPLIANCE FCC ............................................................................................................................6
INTEGRATION CONSIDERATIONS AND INSTALLATION REQUIREMENTS ............................................................................6
DISCLAIMER ......................................................................................................................................................................6
1.
INTRODUCTION.......................................................................................................................................................6
1.1
PRODUCT OVERVIEW ............................................................................................................................................6
1.2
KEY FEATURES .....................................................................................................................................................6
1.3
PROVIDING MULTI-BAND OPERATION ..................................................................................................................6
1.4
SUMMARY OF FEATURES ......................................................................................................................................6
1.5
GENERAL DESIGN GUIDELINES ............................................................................................................................6
1.5.1
Advanced tips for an RF friendly layout ..................................................................................................6
1.5.2
Audio Reference Design ...........................................................................................................................6
2.
TECHNICAL SPECIFICATION..............................................................................................................................6
2.1
2.2
2.3
3.
BLOCK DIAGRAM ...................................................................................................................................................6
HARDWARE KEY PARTS ........................................................................................................................................6
ABSOLUTE MAXIMUM RATINGS .............................................................................................................................6
PHYSICAL INTERFACES .......................................................................................................................................6
3.1
MODULE MOUNTING TO HOST BOARD (REFERENCE)..........................................................................................6
3.2
CONNECTORS .......................................................................................................................................................6
3.3
RF CONNECTION...................................................................................................................................................6
3.3.1
Coaxial Connector Option .........................................................................................................................6
3.3.2
Note: The above information regarding the connector and mating connector are taken from the pertinent
manufacturer specifications; for more details, please refer to the specifications of the part manufacturer.I/O
Connector Pin Assignment ...........................................................................................................................................6
3.3.2
I/O Connector Pin Assignment .....................................................................................................................6
3.4
ANTENNA ...............................................................................................................................................................6
3.5
CONTROL CONNECTOR SIGNAL DESCRIPTIONS AND FUNCTIONS .......................................................................6
3.5.1
Module Power (Pins 41, 42, 43, 44 & 45) ...............................................................................................6
3.5.2
Reset Signal (Pin 55) .................................................................................................................................6
3.5.3
Power Control (pin 56)...............................................................................................................................6
3.5.4
SIM Interface (pins 16, 17,18 &19) ..........................................................................................................6
3.5.5
PCM Interface (pins 23, 24, 25 & 26) ......................................................................................................6
3.5.6
Auxiliary Audio Interface............................................................................................................................6
3.5.7
Serial Interface UART0..............................................................................................................................6
3.5.8
Debug communication(Pins 10, 31).........................................................................................................6
4.
GSM/GPRS SERVICES.............................................................................................................................................6
4.1
4.2
4.3
4.4
5.
TRANSMISSION MODES FOR THE GSM/GPRS SERVICES ..................................................................................6
VOICE COMMUNICATION .......................................................................................................................................6
CIRCUIT-SWITCHED DATA ....................................................................................................................................6
SHORT MESSAGE SERVICES(SMS) .....................................................................................................................6
SIM OPERATION......................................................................................................................................................6
5.1
5.2
5.3
PROVISIONING THE SIM........................................................................................................................................6
GSM SUPPORTED SERVICES ...............................................................................................................................6
GPRS SUPPORTED SERVICES .............................................................................................................................6
11/10/2008
Confidential
Page 2 of 53
80350 Module Integration Guide
5.4
6.
SOFTWARE INTERFACE .......................................................................................................................................6
6.1
6.2
7.
GSM MODES OF OPERATION ...............................................................................................................................6
API INTERFACE .....................................................................................................................................................6
AT COMMAND SET ................................................................................................................................................6
SETUP AND INITIALIZATION ..............................................................................................................................6
7.1
INITIALIZATION ......................................................................................................................................................6
7.1.1
Start HyperTerminal ...................................................................................................................................6
7.1.2
Initialization Command ..............................................................................................................................6
7.2
SEND SMS EXAMPLE ...........................................................................................................................................6
7.3
VOICE CALL EXAMPLE ..........................................................................................................................................6
7.3.1
MO ................................................................................................................................................................6
7.3.2
MT.................................................................................................................................................................6
7.4
GPRS PACKET EXAMPLES ...................................................................................................................................6
REFERENCES....................................................................................................................................................................6
ABBREVIATION ...............................................................................................................................................................6
11/10/2008
Confidential
Page 3 of 53
80350 Module Integration Guide
Safety Precautions
Before you use the 80350 module, please carefully read this section to understand the correct method of use
and ensure the safety of the holder, others and properties.
Do not expose the 80350 module to open flames.
Ensure that liquids do not spill onto the 80350 module.
Do not use the 80350 module in an environment of extremely high or low temperature, otherwise,
malfunctions may be caused.
Using the 80350 module in an environment of moist or high humidity may cause malfunctions of the
product.
Do not drop or strongly impact the 80350 module; otherwise, malfunctions may be caused and the
product cannot be used.
Do not use the 80350 module near any electronic device vulnerable to interference. Otherwise,
malfunctions of electronic device may result. Such electronic devices include medical electronic devices,
such as hearing aids and pacemaker, fire alarms, auto doors and other automatic equipment. If you
have to use the 80350 module near such devices, please first consult the manufacturers and dealers of
these devices to avoid interference.
Do not dispose the 80350 module as urban waste. For details, please refer to the local regulations for
proper disposal of waste electronics.
Do not attempt to disassemble the 80350 module; doing so will void the warranty. With the exception of
the Subscriber Identification Module (SIM), this product does not contain consumer-serviceable
components.
The specifications of this product are subject to change due to improvement of its functionality without
notice.
11/10/2008
Confidential
Page 4 of 53
80350 Module Integration Guide
Overview
This document is intended to offer the application developer a reference to the 80350 module’s hardware and
software specifications and interfaces.
Document History
Version
0.00
0.01
Date
09/05/2008
10/29/2008
Author
PPD
PPD
0.02
11/25/2008
PPD
11/10/2008
Confidential
Comments
Draft
Revised per TNL’s comments and other
comments
FCC/IC/CE compliance declaration
wording revised
Page 5 of 53
80350 Module Integration Guide
Regulatory Compliance
Declaration of Conformity
This device meets the FCC Radiofrequency Emission Guidelines and is certified with the FCC as:
Model number: 80350
FCC ID number: JUP80350000A.
Industry Canada ID number: 1756A-8035000A
Identification mark: 1588 (Notified Body) CE.
Person responsible for making this declaration: Brian Jackson, Trimble Navigation Ltd., 935 Steward Dr.,
Sunnyvale, CA 94085, USA.
Compliance with CE Rules and Regulations
For compliance purposes, the label must show the CE Mark and Notified Body number. The product must be
correctly installed in order to maintain compliance.. The RF safety has been based on an MPE calculation;
therefore, the device must be used at more than 20 cm (or 7.9 in.) from the body. Also, the compliance of the
host product (containing the module) is the responsibility of the integrator who puts the host product on the
market, and further testing may be required, with this module installed in the host device.
Compliance with FCC/IC Rules and Regulations
This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does
not cause harmful interference, and that this device must accept any interference received, including
interference that may cause undesired operation.
Caution
Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate
the equipment.
When incorporating the 80350 module in a host product, the integrator must ensure that the host product
comply with relevant FCC requirements and regulations.
For mobile or fixed applications (with the device at least 20 cm or 7.9 in. distance from the body), the integrator
is authorized to use the FCC/IC Grants and Certificates of this module for their host product if the module is
integrated and installed in accordance with the conditions under which the module has been tested and
certified. In this case the FCC label of the module shall be visible from the outside, or the host product shall bear
a label making reference to the module inside (the label should state “Contains FCC ID JUP80350000A” or
something to the effect). FCC RF safety regulations require a warning label prompting the user to keep the
antenna of a device in operation at least 20 cm or 7.9 in. distance from the body.
11/10/2008
Confidential
Page 6 of 53
80350 Module Integration Guide
Important
For portable applications (with the device less than 20 cm or 7.9 in. distance from the body), the integrator are
required to have their host product certified to obtain its own FCC/IC Grants and Certificates. This is mandatory
to meet the SAR requirements for portable wireless devices. See www.fcc.gov/oet/rfsafety for more information
on RF exposure safety and product labeling requirements.
Disclaimer
The 80350 module and the information and statement in this document, at the time of its publication, are in
compliance with FCC, PTCRB, IC and CE rules and regulations. Liability from any usage that violates these
rules and regulations is the sole responsibility of the user.
It is strongly recommended that the installation and tuning of the 80350 module be only undertaken by RF
specialists with adequate experience and credentials. The reference design and suggested methods for
installing and tuning the module shall not be deemed applicable under all possible environments and conditions
of application; the manufacturer shall not be held liable for incorrect parameters or measurements as a result of
egression from the range of environments and conditions considered by the manufacturer.
The manufacturer shall not be held responsible for bodily injuries or property damages as a result of installing
and using the 80350 module.
11/10/2008
Confidential
Page 7 of 53
80350 Module Integration Guide
1. Introduction
1.1 Product Overview
The 80350 module is a highly integrated GSM/GPRS module, which has built-in support for RF, voice, power
management, among other functionalities, and is in compliance with GSM/GPRS wireless communication
standards.
1.2 Key Features
The following table summarizes the main features of the 80350 module.
Data input/output interface
80-pin connector
Interface
Primary serial port
full 9-pin, UART implementation
PCM Port
Only support salve (only for Audio PCM)
Voice
Support 2 Audio In and 2 Audio out
Antenna Interface
Ultra-miniature coaxial connector
Command protocol
GSM AT command set (80350 GSM/GPRS Modem Module
AT Command Specification)
Subscriber Identification
Optional 1.8/3 V mini-SIM carrier and interface on-board with
Module (SIM)
SIM detect
Power
Electrical power
3.55V to 4.2V (VBATT)
Peak currents and average
Refer to the Operating Power table in the summary of features
power dissipation
for peak currents and average power dissipation for various
modes of operation.
Radio
Frequency bands
EGSM 900, GSM1800, GSM 850 and GSM 1900 capability.
Features
GSM/GPRS features
Provides for all GSM/GPRS authentication, encryption, and
supported
frequency hopping algorithms. GPRS Coding Schemes
CS1-CS4 supported. Multi-Slot Class 10 (4RX/2TX, Max 5
Slots)
Regulatory
Agency approvals
• GCF Type Approval
• PTCRB Type Approval
• FCC Certification
• CE (Conformité Européenne)
• IC (Industry Canada) Approval
11/10/2008
Confidential
Page 8 of 53
80350 Module Integration Guide
GSM/GPRS
Functionality
Audio
Features
SIM
• Mobile-originated and mobile-terminated SMS messages: up to 140 bytes or up to 160 GSM
7-bit ASCII characters.
• Reception of Cell Broadcast Messages
• SMS Receipt acknowledgement
• Circuit Switched Data (Transparent & Non-transparent up to 9.6 Kbps)
• Voice (EFR, FR, HR, and AMR)
• Supports Unstructured Supplementary Service Data (USSD)
• Multi-Slot Class 10 Supported (4Rx/2TX, 5 Slot Max)
• PBCCH/PCCCH supported
• Microphone biasing
• 2 Analog Audio Input
• 2 Analog Audio Output
1.8/3 V Mini-Subscriber Identity Module (SIM) compatible
1.3 Providing Multi-Band Operation
The 80350 module supports quad-band GSM operation: 850/900/1800/1900MHz.
1.4 Summary of Features
Mechanical:
Dimensions
Weight
45.7 mm x 34.1 mm x 3.5 mm (not including mounting tabs)
8.1 g
Packet Data Transfer:
Protocol
Coding Schemes
Multi-Slot Capability: (Demonstrated @MS10)
Packet Channel Support
GPRS Release 97
CS1-CS4
MS10 (4RX/2TX, Max 5 Slots)
PBCCH/PCCCH
Circuit Switched Data Transfer:
V110
300 bps/1200 bps/2400 bps/4800 bps/9600 bps/14,400 bps
Non-Transparent 300 bps/1200 bps/2400 bps/4800 bps/9600 bps/14,400 bps
Short Message Services:
GSM SMS
MO, MT, CB, Text and PDU Modes
GPRS SMS
MO, MT, CB, Text and PDU Mode
Voice Capability:
Speech Codec
EFR, FR, HR, and AMR
GSM/GPRS Radio Performance Multi-Band:
Radio Frequencies
850 MHz, 900 MHz, 1800 MHz and 1900 MHz
Sensitivity
<-102 dBm (Typical GPRS CS1)
850 & 900 MHz Transmit Power
Class 4 (2 W)
1800 & 1900 MHz Transmit Power
Class 1 (1 W)
System Requirements:
Host Interface
DC Voltage
11/10/2008
Serial Interface
3.55 to 4.2 V
Confidential
Page 9 of 53
80350 Module Integration Guide
Application Interface:
Host Protocol
Internal Protocols
Physical Interface
Audio Interface
SIM Interface:
Remote SIM Option
AT Commands
UDP stack, TCP/IP stack, PPP, PAD and CMUX
1 serial (primary) and I2C
• Microphone biasing
• 2 Analog Audio Input
• 2 Analog Audio Output
1.8/3-Volt SIM Capability
Environmental:
Compliant Operating Temp
Operating Temperature
Storage Temperature
Humidity
EMC:
Emissions
-20 °C to 60 °C (Fully GSM Spec Compliant)
-20 °C to 70 °C
-40 °C to 85 °C
5 to 95% non-condensing
FCC Parts 15 Class B & 22 & 24, IC & CE
Operating Power (Typical):
GSM Operation
GSM 850/900 (1 RX/1 TX, full power)
GSM 1800 (1 RX/1 TX, full power)
GSM 1900 (1 RX/1 TX, full power)
Idle
Shutdown
66 mA min, 221 mA average, 1.23 A peak
59 mA min,170 mA average, 775 mA peak
58 mA min,161 mA average, 711mA peak
<5 mA Average
<1mA
GPRS Operation Power
EGSM 850/900 (4 RX/1 TX, full power)
EGSM 850/900 (2 RX/2 TX, full power)
GSM 1800 (4 RX/1 TX, full power)
GSM 1800 (2 RX/2 TX, full power)
GSM 1900 (4 RX/1 TX, full power)
GSM 1900 (2 RX/2 TX, full power)
Idle
Shutdown
146 mA min, 247 mA average, 1.28 A peak
71 mA min, 370 mA average, 1.28 A peak
159mA min, 193 mA average, 796 mA peak
112 mA min, 259 mA average,786 mA peak
154 mA min, 185 mA average, 751mA peak
60 mA min, 246 mA average, 736mA peak
<5 mA average
<1mA
GSM Transmit Power:
1800/1900 MHz
GSM Power Class 1 (30 dBm ± 2 dB @ antenna connection
850/900 MHz
GSM Power Class 4 (33 dBm ± 2 dB @ antenna connection)
GSM/GPRS Receiver Sensitivity (Typical):
1800/1900 MHz
<-102 dBm, GPRS Coding Scheme 1 (CS1)
850/900 MHz
<-102 dBm, GPRS Coding Scheme 1 (CS1)
11/10/2008
Confidential
Page 10 of 53
80350 Module Integration Guide
1.5 General Design Guidelines
1.5.1 Advanced tips for an RF friendly layout
1.5.1.1 Ground Plane
When designing the 80350 module into the host application, special care must be taken regarding the design of
grounding on the host PCB. Proper grounding of the module’ is an essential part of any good application, as it
can very effectively keep EMI in check and ensure good heat dissipation. An example is shown in the drawing
below:
1． It is recommended that the entire board space underneath the 80350 module be made the ground plate
with sufficient ground vias, and this ground be adequately connected to the mounting tab ground. In doing
so, good connectivity can be achieved between the module’s ground and that of the host board.
2． Running traces beneath this ground plate is strongly discouraged.
11/10/2008
Confidential
Page 11 of 53
80350 Module Integration Guide
1.5.1.2 Antenna and RF Signal Trace
For best antenna performance, please ensure that the antenna’s RF trace be designed to be 50 ohm special
impedance line, and that there are a sufficient number of ground holes around the antenna impedance line and
connector. Keep other traces of the module and the host board as far from this impedance line as possible. It
should be avoided that other traces run in parallel to or cross the antenna impedance line. The antenna should
be kept away metallic components.
1.5.1.3 Vbatt Input
The power supply of the 80350 module is of critical importance to the module’s stability and safety. The 80350
module encompasses all working elements of GSM. It is recommended that the width of power trace be greater
than 2 mm, and that a sufficiently large capacitor be placed in the nearest vicinity of the Power pin (two 1000uF
capacitors, preferably, low ESR Tantalum capacitors) in order to cope with bursts during GSM operation (such
bursts cause voltage transients as shown in the figure below).
11/10/2008
Confidential
Page 12 of 53
80350 Module Integration Guide
The following picture shows an example of the power supply trace for the module. The trace covers the entire
power pin of the module. The wide trace is intended to minimize voltage drop over the trace.
11/10/2008
Confidential
Page 13 of 53
80350 Module Integration Guide
1.5.2 Audio Reference Design
1.5.2.1 Audio schematics
The audio quality is very much dependent on the circuit design and layout. As an aid to obtaining good audio
quality, a reference design has been included below.
1． Please serially place a Bead on Audio In/Out (see in the following circuit: L100, L101, L102, L103, L106 and
L107) in order to reduce GSM TDD noise. Bead (100MHz, R>=1K ohm) is recommended.
2． Add a small capacitor on each audio trace. This small capacitor is for further reducing the TDD noise. The
typical value of capacitance is 10pF to 100pF. The actually value needs to be tuned based on the location
and layout of the audio circuitry.
3． The suggested locations of the capacitors and Bead are in the vicinity of Microphone and Receiver, rather
than the module.
4． Maintain proper separation of the Audio In reference ground from the Audio Out reference ground so as to
minimize ECHO coupling in the circuitry.
5． Microphone and Receiver should be physically separated from one another, e.g., on the two far ends of the
evaluation board, as the spatial coupling of voice signal may occur, resulting in ECHO or screeching sound.
11/10/2008
Confidential
Page 14 of 53
80350 Module Integration Guide
1.5.2.2 Audio Layout
Audio signals are very weak and are in the category of weak analog signals; they are extremely susceptible to
interference from digital signals. Therefore, it is suggested that audio signal traces follow the same layer
differential trace layout method, and be kept far away from strong digital signals (e.g., power signal, RF related
signal, CLK signal and high-speed Bus).
11/10/2008
Confidential
Page 15 of 53
80350 Module Integration Guide
2. Technical Specification
2.1 Block Diagram
11/10/2008
Confidential
Page 16 of 53
80350 Module Integration Guide
2.2 Hardware Key Parts
Part
Description
CPU
IC-CPU,AD6720ABCZ-RL,GP,BGA,TAP,39MHZ,289PIN,ADI
Memory
IC-MEMORY,K5L3316CAM-D770,GP,FBGA,TRAY,SAMSUNG
Transceiver
IC-RF,AD6549BCPZ,GP,LFCSP,TAP,32PIN,GSM850/900 DCS/PCS,ADI
RF Switcher
IC-RFSW,LMSP43MA-271TEMP,GP,QFN,TAP,16PIN,GSM,MURATA
SAW-Filter
FILTER,SAFED881MFL0F05R00,GP,881.5MHZ,5P,MURATA
SAW-Filter
FILTER,SAFED1G96FA0F00R00-GP,GP,1.96GHZ,5P,MURATA
SAW-Filter
FILTER,SAFED942MFM0F00R00-GP,GP,942.5MHZ,5P,MURATA
SAW-Filter
FILTER,SAFED1G84FB0F00R00-GP,GP,1842.5MHZ,5P,MURATA
Oscillator
XTAL,MC-146,GP,32.768KHZ,20PPM,12.5PF,EPS
TCXO
XTAL,TTS18VSG-A5,GP,26MHZ,10PPM,3.5PF,TOKYO
RF-PA
IC-RF,SKY77318,GP,TAP,20PIN,GSM900/GSM850,SKYWORKS
B2B Connector
CONN,AXK880125WG,GP,80PIN,SMD,TAP,FPC,MA
RF Connector
CONN,CL331-0471-0-10,GP,ML,2PIN,SMD,TAP,HRS
2.3 Absolute Maximum Ratings
The absolute maximum ratings stated in following Table are stress ratings under any conditions. Stresses
beyond any of these limits will cause permanent damage to the 80350 module.
Parameter
Min
Max
Unit
Supply Voltage BATT
-0.3
5.5
Voltage at digital pins in POWER DOWN mode
-0.3
0.3
Voltage at digital pins in normal operation
-0.3
3.05
or
VEXT+0.3
Voltage at analog pins in POWER DOWN mode
-0.3
0.3
Voltage at VCHARGE pin
-0.3
5.5
VSENSE
5.5
ISENSE
5.5
5.5
VRTC
Operating Rating: -20°C to +70°C
Storage Temperatures: -40°C to +85°C
11/10/2008
-0.3
Confidential
Page 17 of 53
80350 Module Integration Guide
3. Physical Interfaces
Mounting Tabs
80350 Dimension (mm)
11/10/2008
Confidential
Page 18 of 53
80350 Module Integration Guide
3.1 Module Mounting to Host Board (Reference)
The module provides mounting tabs that needs to be soldered to a PCB. These tabs provide circuit grounding
for the module.
Host Board Layout
11/10/2008
Confidential
Page 19 of 53
80350 Module Integration Guide
A Type Pad
B Type Pad
11/10/2008
Confidential
Page 20 of 53
80350 Module Integration Guide
3.2 Connectors
On the 80350 module: CONN,AXK880125WG,GP,80PIN,SMD,TAP,FPC,MAT
Modem module manufacturer Part Number is 6012A0190101.
MATSUSHITA Part Number is AXK880125WG
11/10/2008
Confidential
Page 21 of 53
80350 Module Integration Guide
On the Host: CONN,AXK780327G,GP,x,80PIN,SMD,TAP,FPC,MAT
Modem module manufacturer Part Number = 6012A0190001
MATSUSHITA Part Number is AXK780327G
Note: The above information regarding the connector and mating connector are taken from the pertinent manufacturer
specifications; for more details, please refer to the specifications of the part manufacturer
11/10/2008
Confidential
Page 22 of 53
80350 Module Integration Guide
3.3 RF Connection
3.3.1 Coaxial Connector Option
On the module: GP,ML,2PIN,SMD,TAP
Internal Part Number = 6012A0189501
HIROSE: CL331-0471-0-10
3.3.2 Note: The above information regarding the connector and mating
connector are taken from the pertinent manufacturer specifications; for more
details, please refer to the specifications of the part manufacturer.
11/10/2008
Confidential
Page 23 of 53
80350 Module Integration Guide
I/O Connector Pin Assignment
The following table shows the pin assignment on the input/output connector.
Pin
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
I/O
Ground
Ground
UART
UART
UART
Ground
Ground
Ground
Ground
Ground
Power
Power
Power
Power
Power
11/10/2008
80350 Define
DGND
Reserved
NC
DGND
Reserved
Reserved
Reserved
Reserved
Reserved
DBGTX
Reserved
NC
NC
Reserved
NC
SIM_CLK
SIM_VCC
SIM_DAT
SIM_RST
NC
NC
NC
PCM_CLK
PCM_SYNC
PCM_RXD
PCM_TXD
Reserved
Reserved
Reserved
RXD0
DBGRX
TXD0
Reserved
Reserved
Reserved
DGND
DGND
DGND
DGND
DGND
VBATT
VBATT
VBATT
VBATT
VBATT
Description (Default function / secondary function)
Ground
Floating
No connect
Ground
Floating
Floating
Floating
Floating
Floating
Debug TX
Floating
No connect
No connect
Floating
No connect
SIM interface clock
SIM interface vcc
SIM interface data
SIM interface reset
No connect
No connect
No connect
PCM interface clock
PCM interface sync
PCM interface RXD
PCM interface TXD
Floating
Floating
Floating
Serial data input
Debug RXD
Serial data output
Floating
Floating
Floating
Ground
Ground
Ground
Ground
Ground
Power
Power
Power
Power
Power
Confidential
Page 24 of 53
80350 Module Integration Guide
46
47
UART
48
UART
49
UART
50
UART
51
52
UART
53
54
UART
55
56
57
Ground
58
Analog
59
Analog
60
Analog
61
Analog
62
Analog
63
Analog
64
Analog
65
Analog
66
67
Power
68
69
70
71
72
73
74
75
76
77
78
79
80
Ground
I = Input;
O = Output;
NC = No connect
Reserved
RING0
DSR0
RTS0
DTR0
Reserved
CTS0
Reserved
DCD0
/RESET
POWER_KEY
AGND
MIC1N
MIC1P
MIC2P
MIC2N
SPKN
SPKP
RECP
RECN
Reserved
Reserved
NC
NC
Reserved
NC
NC
NC
Reserved
Reserved
Reserved
NC
Reserved
NC
DGND
Floating
ring indicate
Data set ready
Ready to send
Data terminal ready0
Floating
Clear to Send
Floating
Data carrier detect
External Reset input
Power Key
Ground
Auxiliary Audio input
Auxiliary Audio input
Auxiliary Audio input
Auxiliary Audio input
Auxiliary Audio output
Auxiliary Audio output
Auxiliary Audio output
Auxiliary Audio output
Floating
Floating
No connect
No connect
Floating
No connect
No connect
No connect
Floating
Floating
Floating
No connect
Floating
No connect
Ground
3.4 Antenna
The 80350 module has an RF antenna interface; for its specification, please refer to Section 3.3.1. Note that this
RF connector is a connector only, and is not a switch. Through this connector, various RF performance
parameters of the module can be measured.
11/10/2008
Confidential
Page 25 of 53
80350 Module Integration Guide
3.5 Control Connector Signal Descriptions and Functions
3.5.1 Module Power (Pins 41, 42, 43, 44 & 45)
The 80350 module requires a single power supply and no additional working power supply is required. The
relevant parameters are defined in the following table.
The module has multiple LDOs (Low Drop Linear Voltage Regulators) inside, which support various different
working units, including internal memory, GSM RF, CPU, IO ports, audio, etc. Therefore, the 80350 module
depends heavily on external power supply, which directly impacts, the stability and RF performance parameters
of the module. Please carefully follow the description of power supply and ground in Sections 1.5.1 and 1.5.3.
The 80350 module uses a single voltage source of VBATT = +3.55V to 4.2V.
VBATT
Min.
Typ.
Parameters/Conditions
Main Battery Supply
Voltage In Regulation
3.55
3.8
Max.
4.2
Units
Vdc
Minimizing Power Loss
The measurement network monitors outburst and inburst values. The drop is the difference of both
values. The maximum drop (Dmax) since the last start of the module will be saved. In IDLE and
SLEEP mode, the module switches off if the minimum battery voltage (Vbattmin) is reached.
Example:
VImin = 3.3V
Dmax = 0.25 V
Vbattmin = VImin + Dmax
Vbattmin = 3.3V + 0.25V = 3.55V
For Example:
Figure : Power supply limits during transmit burst
3.5.2 Reset Signal (Pin 55)
The Reset signal is an input to the 80350 module. It is used to reset the module during emergency situations;
the signal is Low active..
11/10/2008
Confidential
Page 26 of 53
80350 Module Integration Guide
When the module is running in a undefined or uncontrollable state, it can be reset by forcefully pulling Low the
RESET signal port. It should be noted that all pending processes will be aborted, and hence, will need to be
restarted.
Note: During normal module operation, please do not operate on the RESET signal pin. The following diagram
shows the relevant signal timings in the module during its Power-On/Power-Off
Power-On / Power-Off and RESET Scenarios
Figure : Power-on and reset with operating voltage at VBATT
11/10/2008
Confidential
Page 27 of 53
80350 Module Integration Guide
Figure : Power-Off and RESET with operating voltage at VBATT
3.5.3 Power Control (pin 56)
The input is equivalent to a “phone ON-button”. A falling-edge on this Active-Low input will switch-ON the
module or switch-OFF the module after a delay.
Please see the “Power-On / Power-Off and RESET Scenarios”
3.5.3.1 Power On
Pulling the POWER_KEY line on the module LOW for at least 500 msec (after Vbatt is applied and stabilized) is
required to turn it ON.
3.5.3.2 Power Off
The module can be turned off by a low pulse on the POWER_KEY pin.
3.5.3.3 Using the Power Control Signal
Typical use powering module on/off with a switch:
11/10/2008
Confidential
Page 28 of 53
80350 Module Integration Guide
3.5.4 SIM Interface (pins 16, 17,18 &19)
The 80350 module’s built-in baseband processor has SIM card interface support compatible with ISO7816 IC
card standard. Each of the SIM card pins is connected to the corresponding pins of the baseband processor;
please refer to pin assignment defined in a preceding section. The following figure shows a reference
connection scheme of the SIM card slot, where C109,C125 and R112 are reserved, and are only used when
tuning to reduce EMI The user is free to disregard these optional components.
The SIM card interface supports 3V and 1.8V SIM cards.
3.5.5 PCM Interface (pins 23, 24, 25 & 26)
The PCM can be used to connect the 80350 module with audio devices capable of PCM (Pulse Code
Modulation).
Interface Name
Function
Input/Output
PCM_TXD
TXDAI
Output
PCM_RXD
RXDAI
Input
PCM_SYNC
Frame SYNC
Output
PCM_CLK
Bit Clock
Output
11/10/2008
Confidential
Page 29 of 53
80350 Module Integration Guide
For the PCM signal pins, please pay attention to the direction of I/O pinout. The 80350 module’s PCM codec
does not generate any clock signals, but only receive external PCM clock signal; hence, the module can act as
a slave PCM device, but not as a master device.
Next, more details on parameters and timing of PCM signal are presented. (Excerpts taken from the datasheet
of the PCM codec IC)
11/10/2008
Confidential
Page 30 of 53
80350 Module Integration Guide
PCM interface timing and parameters
11/10/2008
Confidential
Page 31 of 53
80350 Module Integration Guide
Figure 1: Long Frame timing
Figure 2: Short Frame timing
11/10/2008
Confidential
Page 32 of 53
80350 Module Integration Guide
11/10/2008
Confidential
Page 33 of 53
80350 Module Integration Guide
3.5.6 Auxiliary Audio Interface
The 80350 module allows four analog audio channels with physical interfaces on the board-to-board connector;
these channels are programmable by software:
• Two Auxiliary audio input interfaces, both with balanced or single-ended inputs.
• Two Auxiliary audio output interfaces, both with balanced or single-ended outputs.
This means that you can connect up to four different audio devices, although only one interface can be operated
at any given time. Using software command you can easily switch back and forth among the channels.
3.5.6.1 Auxiliary Audio output interface (Pins 62, 63, 64 & 65)
The analog output interface has two channels switchable by software. Specially,
A. SPKP/SPKN(pin62,63) Normal Differential Audio Output Specifications
11/10/2008
Confidential
Page 34 of 53
80350 Module Integration Guide
B. RECP/RECN(Pin64,65), Normal Differential Audio Output Specifications
Note: For guidelines on the layout of Audio Output circuitry. please refer to Section 1.5.2.2.
11/10/2008
Confidential
Page 35 of 53
80350 Module Integration Guide
3.5.6.2 Auxiliary Audio input interface (Pins 58, 59, 60 & 61)
There are two reserved channels for analog audio input:
Specification
Typ.
Units
Full-scale Input Voltage
2.0
Vpp
Input Resistance
10
Kohm
Comments:
A. For voice call, MIC1P/MIC1N interface is recommended as Audio Input.
B. On the 80350 module, only Audio Input interface is reserved. Except for the utility for microphone bias
voltage, the 80350 board possesses no specific microphone support circuitry; therefore, such needs to be taken
into account in the host board design.
C. For microphone circuitry layout, please refer to Section 1.5.2.2.
3.5.7 Serial Interface UART0
The module offers an 8-wire unbalanced, asynchronous modem interface ASC0.
The module is designed for use as a DCE. Based on the conventions for DTE-DCE connections it
communicates with the customer application (DTE) using the following signals:
• Port TXD @ application sends data to the module’s TXD0 signal line
• Port RXD @ application receives data from the module’s RXD0 signal line
Pin Name
Pin Number
Signal Direction
Description
RXD0
30
Serial data input (DTE <-- DCE)
TXD0
32
Serial data output (DTE Æ DCE)
RTS0
49
Request to send (DTE Æ DCE)
CTS0
52
Clear to Send (DTE <-- DCE)
DCD0
54
Data carrier detect (DTE <-- DCE)
DTR0
50
Data terminal ready (DTE Æ DCE)
DSR0
48
Data set ready (DTE <-- DCE)
RING0
47
Ring detect output (DTE <-- DCE)
Note:
Pin Name and Signal Direction from HOST(DTE) Confirm, not the module.
11/10/2008
Confidential
Page 36 of 53
80350 Module Integration Guide
3.5.8 Debug communication(Pins 10, 31)
The module can be calibrated by software through there two pins.
PINS
10
31
Assignment
DBGTX
DBGRX
11/10/2008
Description
Debug transmitter
Debug receiver
Confidential
Input/Output
Output
Input
Page 37 of 53
80350 Module Integration Guide
4. GSM/GPRS Services
The 8035 module supports the following GSM/GPRS services:
z Short Message Services (SMS)
z Class B GPRS Functionality
z Voice communication
z Circuit-switched data
4.1 Transmission Modes for the GSM/GPRS Services
Each of the GSM/GPRS services has two modes that can be enabled separately:
z Mobile-originated (MO): allows the making of a service request (such as making a telephone call or
sending an SMS)
z Mobile-terminated (MT): allows receiving a service request (such as receiving a telephone call or an SMS)
Note: Contact your local GSM operator to ensure that the services and modes have been provisioned for
the SIM card.
4.2 Voice Communication
The 80350 module supports voice functions. On the 80-pin board-to-board connector, there are reserved pins
for microphone and earphone hardware interfaces. When these are connected with microphone and earphone
hardware, the desired voice functions can be executed by invoking relevant commands in the AT Command set
(please refer to 80350 GSM/GPRS Modem Module AT Command Specification).
The 80350 module supports the following four audio coding formats:
1. Full-Rate (FR)
2. Enhanced Full-Rate (EFR)
3. Half-rate (HR)
4. Adaptive Multi-rate (AMR)
4.3 Circuit-Switched Data
In this mode, the 80350 module supports both of the connection modes of transmission that are provided by
GSM:
z Non-Transparent mode delivers a constantly low error rate but with a non-guaranteed throughput or
delay. The Non-Transparent service provides a performance that is closest to using a modem over a
fixed Public Switched Telephone Network (PSTN) line.
Note: All GSM service providers may not support transparent mode. In those cases, the 80350 module
can be configured to switch automatically to Non-Transparent mode. This capability depends on the
settings in the AT+CBST command.
11/10/2008
Confidential
Page 38 of 53
80350 Module Integration Guide
4.4 Short Message Services(SMS)
The 80350 module can perform the following tasks for the GSM Short Message Services:
z Sending and receiving binary messages of up to 160 characters (7-bit characters)
Sending and receiving text messages of up to 140 bytes (8-bit data)
Submitting a SMS Protocol Data Unit (PDU) to a SMSC (Short Message Service Center) and storing a
copy of the PDU until either a report arrives from the network or a timer expires
Receiving a SMS PDU from a SMSC
Returning a delivery report to the network for a previously received message
Receiving a report from the network
Notifying the network when the module has sufficient memory capacity available to receive one or more
SMS messages (after the module had previously rejected a message because its memory capacity was
exceeded)
5. SIM Operation
5.1 Provisioning the SIM
The SIM card is configurable. To most users, the basic requirement on the SIM card is the ability to configure
and use voice call and SMS Receive services, while some users may further need SMS Send and GPRS data
services. The 80350 module can meet the MO (Mobile-Originated) and MT (Mobile-Terminated) usage
requirements, and can configure the relevant services of the SIM card through AT commands (this will need
support from the application layer software).
5.2 GSM Supported Services
The 80350 module supports the following services:
z Voice calls (MO and MT): requires a telephone number
z SMS (MO and MT): requires a telephone number
z Circuit-switched data calls (MO and MT): requires a telephone number
z The GSM SIM can have multiple telephone numbers.
Note: The services depend on the actual network; please contact the network operator in order make sure that
the services are enabled.
11/10/2008
Confidential
Page 39 of 53
80350 Module Integration Guide
5.3 GPRS Supported Services
The 80350 module supports the following GPRS (modes of operation) that must be enabled by the operator:
z GPRS Packet Connectivity (MO and MT) with Both Dynamic and Static IP option
z GPRS SMS (MO and MT): uses the IP (Dynamic or Static) set by the operator
z Multiple APN Setting
z Quality of Service Options
z Multi-slot 10 Class of Service
5.4 GSM Modes of Operation
When provisioning the SIM for the 80350 module, enable the following modes of operation:
z Voice calls: configure the SIM for both MO and MT service (to send and receive)
z SMS: configure the SIM either for MT alone (to receive) or for both MO and MT (to send and receive)
z Circuit Switched Data: configure the SIM either for MO alone (to send) or for both MO and MT (to send
and receive)
Voice
SMS
MO/MT
MO/MT
MO/MT
MT
MO/MT
MO/MT
11/10/2008
CS
Data
MO
MO
MO/MT
GPRS
Function
Voice calls, receive SMS, make data calls
Voice calls, receive / send SMS, make data calls
Voice calls, receive / send SMS, make / receive data calls
(requires an additional data telephone number)
Confidential
Page 40 of 53
80350 Module Integration Guide
6. Software Interface
6.1 API Interface
The 80350 module’s default startup mode is the AT command mode. In this mode, PC Super Terminal or other
serial port communication tools may be used to issue AT commands to the module.
The 80350 module’s default serial communication is set at 115200 baud, no parity, 8 data bits, 1 stop bit, and no
flow control. A user can send/receive AT commands, data, or response to/from the module via one of the two
methods:
z Straight serial communication via HyperTerminal or similar application
Straight serial communication provides the user with the following capabilities:
z Send AT commands and receive response
z Receive SMS notification
z Make a voice, data or fax call
z Receive any unsolicited message
6.2 AT Command Set
This is addressed separately in the document “80350 GSM/GPRS Modem Module AT Command
Specification”.
11/10/2008
Confidential
Page 41 of 53
80350 Module Integration Guide
7. Setup and Initialization
The 80350 module can be controlled by AT command through the COM Port A on the 80350 motherboard.
80350 Motherboard Outline:
I/O Port B
I/O Port A
COM Port B
COM Port A
Module On
Trigger
On
Reset Key
80350 Module
Power
Connector B
On
Off
Power On/Off
Switch
80350 Module
SIM Holder
Power
Connector A
80350 Motherboard
11/10/2008
Confidential
Page 42 of 53
80350 Module Integration Guide
Parts:
Item
I/O Port A
I/O Port B
COM Port A
COM Port B
Power Connector A
Power Connector B
Power On/Off Switch
Module On Trigger
Reset Key
80350 Module
SIM Holder
Function
Reserved
Reserved
COM port to communicate with PC
Reserved
Connect with power supply
Connect with power supply
On/Off the power
Power On the module
Reset the module
The 80350 Module
Using for SIM card
Comments
DB9 Connector
DC 3.55 to 4.2 V
DC 3.55 to 4.2 V
Steps for setting up the testing hardware environment:
1. Install the 80350 module to the 80350 motherboard
2. Put the SIM card into the SIM Holder
3. Plug the power supply to any one of the Power Connector.
4. Power on the 80350 module by switch the GSM On Trigger to “On”.
7.1 Initialization
7.1.1 Start HyperTerminal
On Windows XP, click on:
Start>Programs>Accessories>Communications>HyperTerminal
1. You should see the following screen.
2. Enter a name for the Connection. In this example, the Name is Test COM1.
3. Click OK.
11/10/2008
Confidential
Page 43 of 53
80350 Module Integration Guide
4. The next window that will appear is the Connect To window.
5. Change the Connect Using setting to the Com port that was determined in Step 2.
6. Click OK.
7. The next window is the Port Settings window.
11/10/2008
Confidential
Page 44 of 53
80350 Module Integration Guide
8. Make sure the settings match the example.
9. Click OK.
10. Now the Main Program Window should appear.
11. Terminal Setup Testing.
a. Make sure the cursor is in the main window.
b. Type “AT” and press “Enter”
c. You should see the module responds back with “OK” in the Main Window
d. If this happens, the COM port is configured correctly.
e. At this point you are ready to configure and test the 80350 with AT commands.
11/10/2008
Confidential
Page 45 of 53
80350 Module Integration Guide
7.1.2 Initialization Command
After the module power on, user can initialize the module by following AT commands
Unsolicite
Unsolicite
Entry
Response
Entry
*TSYSSTART
System start
+CFUN: 1
Full functionality (Default)
ATE1
OK
AT&D1
Echo mode on
Command is valid
ON->OFF on DTR: Change to command mode with call
remaining connected
Command is valid
automatic answering is disabled
Command is valid
enable result code and use numeric values
Command is valid
the extended format of incoming call
indication is used
Command is valid
enable network registration unsolicited result code +CREG: 
Command is valid
set only  (for read command +COPS?) – not shown in Read
command response and short format alphanumeric 
Command is valid
duration of the tone in 1/10 seconds
Command is valid
enable presentation of an unsolicited result code
Command is valid
display unsolicited result codes
Command is valid
mute off
Command is valid
Response
Entry
Response
Entry
Response
Entry
OK
ATS0=0
OK
AT+CMEE=1
OK
AT+CRC=1
Response
Entry
Response
Entry
OK
AT+CREG=1
OK
AT+COPS=3,2
Response
Entry
Response
Entry
Response
Entry
Response
Entry
Response
OK
AT+VTD=3
OK
AT+CCWA=1
OK
AT+CLIP=1
OK
AT+CMUT=0
OK
11/10/2008
Confidential
Page 46 of 53
80350 Module Integration Guide
7.2 Send SMS Example
Entry
Respons
Entry
Respons
Entry
Respons
Entry
Respons
Entry
Respons
Entry
AT+CMGF=1
OK
Select SMS format is text
Command is valid
AT+CNMI=2,2,2,0,0
OK
New SMS unsolicited result code: +CMT:
Command is valid
AT+CSCS="IRA"
OK
Select international reference alphabet
Command is valid
AT+CSCA="987654321"
OK
Select SMS Service Centre Address
Command is valid
AT+CMGS="123456789"
Send a message to 123456789
Ready to enter a message.
This is a test message^Z
Respons
Entry
Respons
+CMGS: 1
OK
AT+CMGL= "ALL"
+CMGL:1,"REC
READ","+123456789",,"08/08/08,18:02:15+32"
Enter the text message “This is a test
message”. End the message with Control
Z.
Successful transmission. The number
will increment with each SMS sent.
List All messages from preferred store
List all message
Entry
Respons
Entry
Respons
OK
AT+CMGR=1
+CMGR: "REC
READ","+987654321",,"08/08/08,18:02:15+32"
OK
AT+CMGD= 1
Delete SMS message in preferred store
1.
Successful delete
OK
11/10/2008
Read SMS message in preferred store 1
Read 1 message
Confidential
Page 47 of 53
80350 Module Integration Guide
7.3 Voice Call Example
7.3.1 MO
The call is OK:
Entry
ATD10086;
Unsolicite
+WIND: 5,1
Response OK
Unsolicite
+WIND: 2
Unsolicite
+WIND: 9,1
Entry
ATH
Unsolicite
+WIND: 6,1
Response OK
MT is busy:
Entry
Unsolicite
Response
Unsolicite
Unsolicite
Make a call
The call (id =1) has been established
Command is valid
The MT is ringing
The call is connected
End the call
The call is disconnected
Command is valid
ATD10086;
+WIND: 5,1
Make a call
The call (id =1) has been established
OK
+WIND: 6,1
Command is valid
The call is disconnected
BUSY
MT is busy
MT can’t be connected:
Entry
ATD10086;
Unsolicite
+WIND: 5,1
Response OK
Unsolicite
+WIND: 6,1
Unsolicite
NO CARRIER
Make a call
The call (id =1) has been established
Command is valid
The call is disconnected
MT cannot be connected
7.3.2 MT
Unsolicite
Unsolicite
Entry
Response
Unsolicite
+WIND: 5,1
The call (id =1) has been established
RING
The MT is ringing
ATA
OK
+WIND: 9,1
Accept the call
Command is valid
The call is connected
11/10/2008
Confidential
Page 48 of 53
80350 Module Integration Guide
7.4 GPRS Packet Examples
After the module register on a GSM network:
Entry
AT+CGATT=1
AT command to start the ATTACH sequence
Response OK
Successfully Attached
If the network is a transparent network, then you can activate using HyperTerminal. If it is non
transparent, you have to use a PPP link to activate:
Entry
AT+CGDCONT=1,”IP”,”CMWAP”,””,0,
CMWAP value will be provided by carrier
Response OK
Command is valid
Entry
AT+CGACT=1,1
Request context activation.
Response OK
Successful context activation.
GPRS detach and deactivate:
Entry
AT+CGACT=0,1
Response OK
Entry
AT+CGATT=0
Response OK
11/10/2008
AT command to deactivate.
Successful deactivation.
AT command to detach.
Successful detach.
Confidential
Page 49 of 53
80350 Module Integration Guide
References
1. AT Command Set Reference [80350 GSM/GPRS Modem Module AT Command Specification]
2. GSM 07.05: “Digital cellular telecommunications systems (Phase 2+); Use of Data Terminal Equipment –
Data Circuit terminating Equipment (DTE – DCE) interface for Short Message Service (SMS) and Cell
Broadcast Service (CBS)”.
3. GSM 07.07: “Digital cellular telecommunications systems (Phase 2+); AT command set for GSM Mobile
Equipment (ME)”.
4. ITU-T Draft new Recommendation V.25ter: “Serial asynchronous automatic dialing and control”.
5. AD6720 Technical Data (REV. OCTOBER 18,2005)
6. NARROW-PITCH CONNECTORS Specifications (Jul.13, 2006)
7. U.FL-R-SMT (10) Specifications (Apr.17, 1997)
8. AK2301-MS0416-1-00 Specifications (Aug 31, 2005)
11/10/2008
Confidential
Page 50 of 53
80350 Module Integration Guide
Abbreviation
Abbreviation
Description
ADC
Analog-to-Digital Converter
AFC
Automatic Frequency Control
AGC
Automatic Gain Control
ANSI
American National Standards Institute
ARFCN
Absolute Radio Frequency Channel Number
ARP
Antenna Reference Point
ASC0 / ASC1
Asynchronous Serial Controller. Abbreviations used for first and second serial interface of MC55i
ASIC
Application Specific Integrated Circuit
Thermistor Constant
B2B
Board-to-board connector
BER
Bit Error Rate
BTS
Base Transceiver Station
CB or CBM
Cell Broadcast Message
CE
Conformité Européene (European Conformity)
CHAP
Challenge Handshake Authentication Protocol
CPU
Central Processing Unit
CS
Coding Scheme
CSD
Circuit Switched Data
CTS
Clear to Send
DAC
Digital-to-Analog Converter
DAI
Digital Audio Interface
dBm0
Digital level, 3.14dBm0 corresponds to full scale, see ITU G.711, A-law
DCE
Data Communication Equipment (typically modems, e.g. Siemens GSM engine)
DCS 1800
Digital Cellular System, also referred to as PCN
DRX
Discontinuous Reception
DSB
Development Support Box
DSP
Digital Signal Processor
DSR
Data Set Ready
DTE
Data Terminal Equipment (typically computer, terminal, printer or, for example, GSM
application)
DTR
Data Terminal Ready
DTX
Discontinuous Transmission
DUN
Dial-Up Networking
11/10/2008
Confidential
Page 51 of 53
80350 Module Integration Guide
EFR
Enhanced Full Rate
EGSM
Enhanced GSM
Abbreviation
Description
EMC
Electromagnetic Compatibility
ESD
Electrostatic Discharge
ETS
European Telecommunication Standard
FCC
Federal Communications Commission (U.S.)
FDMA
Frequency Division Multiple Access
FR
Full Rate
GMSK
Gaussian Minimum Shift Keying
GPRS
General Packet Radio Service
GSM
Global Standard for Mobile Communications
HiZ
High Impedance
HR
Half Rate
I/O
Input/Output
IC
Integrated Circuit
IMEI
International Mobile Equipment Identity
ISO
International Standards Organization
ITU
International Telecommunications Union
kbps
kbits per second
LED
Light Emitting Diode
Li-Ion
Lithium-Ion
Mbps
Mbits per second
MMI
Man Machine Interface
MO
Mobile Originated
MS
Mobile Station (GSM engine), also referred to as TE
MSISDN
Mobile Station International ISDN number
MT
Mobile Terminated
NTC
Negative Temperature Coefficient
OEM
Original Equipment Manufacturer
PA
Power Amplifier
PAP
Password Authentication Protocol
PBCCH
Packet Switched Broadcast Control Channel
PCB
Printed Circuit Board
PCL
Power Control Level
PCM
Pulse Code Modulation
11/10/2008
Confidential
Page 52 of 53
80350 Module Integration Guide
PCN
Personal Communications Network, also referred to as DCS 1800
PCS
Personal Communication System, also referred to as GSM 1900
PDU
Protocol Data Unit
Abbreviation
Description
PLL
Phase Locked Loop
PPP
Point-to-point protocol
PSU
Power Supply Unit
R&TTE
Radio and Telecommunication Terminal Equipment
RAM
Random Access Memory
RF
Radio Frequency
RMS
Root Mean Square (value)
ROM
Read-only Memory
RTC
Real Time Clock
Rx
Receive Direction
SAR
Specific Absorption Rate
SELV
Safety Extra Low Voltage
SIM
Subscriber Identification Module
SMS
Short Message Service
SRAM
Static Random Access Memory
TA
Terminal adapter (e.g. GSM engine)
TDMA
Time Division Multiple Access
TE
Terminal Equipment, also referred to as DTE
Tx
Transmit Direction
UART
Universal asynchronous receiver-transmitter
URC
Unsolicited Result Code
USSD
Unstructured Supplementary Service Data
VSWR
Voltage Standing Wave Ratio
11/10/2008
Confidential
Page 53 of 53

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2008:11:26 08:55:20+08:00
Create Date                     : 2008:11:26 08:55:20+08:00
Format                          : application/pdf
Title                           : Microsoft Word - 80350 Module User Manual_rev1.doc
Creator                         : Zi xiaogang
Document ID                     : uuid:70435878-ffbe-40fd-a2e8-3639b8f86ad0
Instance ID                     : uuid:40354e8a-927c-4ea0-a770-6f73ea4512bd
Page Count                      : 53
Author                          : Zi xiaogang

EXIF Metadata provided by EXIF.tools