Trimble 96420 PDA User Manual Trimble Field Inspector Software User Guide

Download:
Mirror Download [FCC.gov]
Document ID	1630203
Application ID	DAUwgbK3xs649Cm06UyF7A==
Document Description	Users Manual 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	139.49kB (1743570 bits)
Date Submitted	2012-02-02 00:00:00
Date Available	2012-02-02 00:00:00
Creation Date	2012-01-20 15:23:15
Producing Software	Acrobat Distiller 8.3.1 (Windows)
Document Lastmod	2012-01-20 15:23:15
Document Title	Trimble Field Inspector Software User Guide
Document Creator	Acrobat PDFMaker 9.1 Word
Document Author:	Technical Publications, Trimble Navigation Limited

USER GUIDE
Trimble Juno Series Handhelds:
TNJ31 and TNJ32
Version 1.00
Revision A
February 2012
ʳ
Safety information
ʳ
About the Juno series
handhelds
ʳ
Getting started
ʳ
Using the Windows Embedded
Handheld operating system
ʳ
Connecting to an office
computer
ʳ
Using the integrated radios to
connect to other devices
ʳ
Using the GNSS receiver
ʳ
Using the camera
ʳ
Troubleshooting
Trimble Navigation Limited
10355 Westmoor Drive
Suite #100
Westminster, CO 80021
USA
www.trimble.com
Legal Notices
Copyright and Trademarks
© 2008-2011, Trimble Navigation Limited. All rights reserved.
Trimble, the Globe & Triangle logo, GPS Pathfinder, and Juno are
trademarks of Trimble Navigation Limited, registered in the United
States and in other countries. EVEREST, GeoBeacon, GPS Analyst,
GPScorrect, H-Star, TerraSync, TrimPix, and VRS are trademarks of
Trimble Navigation Limited.
Microsoft, ActiveSync, Excel, Outlook, PowerPoint, Windows, Windows
Live, Windows Media, Windows Mobile, Windows Vista, and the
Windows Start logo are either registered trademarks or trademarks of
Microsoft Corporation in the United States and/or other countries.
The Bluetooth word mark and logos are owned by the Bluetooth SIG,
Inc. and any use of such marks by Trimble Navigation Limited is under
license.
All other trademarks are the property of their respective owners.
Release Notice
This is the February 2012 release (Revision A) of the Juno Series
Handhelds User Guide, covering Models TNJ31 and TNJ32.The Juno
series handheld’s operating system is based on Microsoft Windows
Embedded Handheld 6.5 Professional operating system.
Limited Warranty Terms and Conditions
Product Limited Warranty
Subject to the terms and conditions set forth herein, Trimble Navigation
Limited (“Trimble”) warrants that for a period of (1) year from date of
purchase this Trimble product (the “Product”) will substantially
conform to Trimble's publicly available specifications for the Product
and that the hardware and any storage media components of the
Product will be substantially free from defects in materials and
workmanship.
Product Software
Product software, whether built into hardware circuitry as firmware,
provided as a standalone computer software product, embedded in flash
memory, or stored on magnetic or other media, is licensed solely for use
with or as an integral part of the Product and is not sold. The terms of
the end user license agreement, as included below, govern the use of the
Product Software, including any differing limited warranty terms,
exclusions and limitations, which shall control over the terms and
conditions set forth in the limited Product warranty.
Warranty Remedies
If the Trimble Product fails during the warranty period for reasons
covered by this limited warranty and you notify Trimble of such failure
during the warranty period, Trimble will repair OR replace the
nonconforming Product with new, equivalent to new, or reconditioned
parts or Product, OR refund the Product purchase price paid by you, at
Trimble’s option, upon your return of the Product in accordance with
Trimble's product return procedures then in effect.
How to Obtain Warranty Service
To obtain warranty service for the Product, please contact your Trimble
dealer. Alternatively, you may contact Trimble to request warranty
service at +1-408-481-6940 (24 hours a day) or email your request to
trimble_support@trimble.com. Please be prepared to provide:
– your name, address, and telephone numbers;
– proof of purchase;
– a copy of this Trimble warranty
– a description of the nonconforming Product including the model
number; and
– an explanation of the problem.
The customer service representative may need additional information
from you depending on the nature of the problem.
Warranty Exclusions and Disclaimer
This Product limited warranty shall only apply in the event and to the
extent that (i) the Product is properly and correctly installed, configured,
interfaced, maintained, stored, and operated in accordance with
Trimble's applicable operator's manual and specifications, and; (ii) the
Product is not modified or misused. This Product limited warranty shall
not apply to, and Trimble shall not be responsible for, defects or
performance problems resulting from (i) the combination or utilization
of the Product with hardware or software products, information, data,
systems, interfaces, or devices not made, supplied, or specified by
Juno Series Handhelds User Guide
Trimble; (ii) the operation of the Product under any specification other
than, or in addition to, Trimble's standard specifications for its products;
(iii) the unauthorized installation, modification, or use of the Product; (iv)
damage caused by: accident, lightning or other electrical discharge, fresh
or salt water immersion or spray (outside of Product specifications); or
exposure to environmental conditions for which the Product is not
intended; (v) normal wear and tear on consumable parts (e.g., batteries);
or (vi) cosmetic damage. Trimble does not warrant or guarantee the
results obtained through the use of the Product or Software, or that
software components will operate error free.
NOTICE REGARDING PRODUCTS EQUIPPED WITH TECHNOLOGY
CAPABLE OF TRACKING SATELLITE SIGNALS FROM SATELLITE BASED
AUGMENTATION SYSTEMS (SBAS) (WAAS/EGNOS, AND MSAS),
OMNISTAR, GPS, MODERNIZED GPS OR GLONASS SATELLITES, OR
FROM IALA BEACON SOURCES: TRIMBLE IS NOT RESPONSIBLE FOR
THE OPERATION OR FAILURE OF OPERATION OF ANY SATELLITE
BASED POSITIONING SYSTEM OR THE AVAILABILITY OF ANY
SATELLITE BASED POSITIONING SIGNALS.
THE FOREGOING LIMITED WARRANTY TERMS STATE TRIMBLE’S ENTIRE
LIABILITY, AND YOUR EXCLUSIVE REMEDIES, RELATING TO THE TRIMBLE
PRODUCT. EXCEPT AS OTHERWISE EXPRESSLY PROVIDED HEREIN , THE
PRODUCT, AND ACCOMPANYING DOCUMENTATION AND MATERIALS ARE
PROVIDED “AS-IS” AND WITHOUT EXPRESS OR IMPLIED WARRANTY OF
ANY KIND, BY EITHER TRIMBLE OR ANYONE WHO HAS BEEN INVOLVED
IN ITS CREATION, PRODUCTION, INSTALLATION , OR DISTRIBUTION,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, TITLE,
AND NONINFRINGEMENT. THE STATED EXPRESS WARRANTIES ARE IN
LIEU OF ALL OBLIGATIONS OR LIABILITIES ON THE PART OF TRIMBLE
ARISING OUT OF, OR IN CONNECTION WITH , ANY PRODUCT. BECAUSE
SOME STATES AND JURISDICTIONS DO NOT ALLOW LIMITATIONS ON
DURATION OR THE EXCLUSION OF AN IMPLIED WARRANTY, THE ABOVE
LIMITATION MAY NOT APPLY TO YOU .
Limitation of Liability
TRIMBLE'S ENTIRE LIABILITY UNDER ANY PROVISION HEREIN SHALL BE
LIMITED TO THE AMOUNT PAID BY YOU FOR THE PRODUCT. TO THE
MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT
SHALL TRIMBLE OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT,
SPECIAL , INCIDENTAL, OR CONSEQUENTIAL DAMAGE WHATSOEVER
UNDER ANY CIRCUMSTANCE OR LEGAL THEORY RELATING IN ANYWAY
TO THE PRODUCTS, SOFTWARE AND ACCOMPANYING DOCUMENTATION
AND MATERIALS, (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR
LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION , LOSS OF DATA, OR
ANY OTHER PECUNIARY LOSS), REGARDLESS OF WHETHER TRIMBLE HAS
BEEN ADVISED OF THE POSSIBILITY OF ANY SUCH LOSS AND REGARDLESS
OF THE COURSE OF DEALING WHICH DEVELOPS OR HAS DEVELOPED
BETWEEN YOU AND TRIMBLE. BECAUSE SOME STATES AND
JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF
LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE
LIMITATION MAY NOT APPLY TO YOU .
PLEASE NOTE: THE ABOVE TRIMBLE LIMITED WARRANTY PROVISIONS
WILL NOT APPLY TO PRODUCTS PURCHASED IN THOSE
JURISDICTIONS (E.G., MEMBER STATES OF THE EUROPEAN ECONOMIC
AREA) IN WHICH PRODUCT WARRANTIES ARE THE RESPONSIBILITY
OF THE LOCAL DEALER FROM WHOM THE PRODUCTS ARE ACQUIRED.
IN SUCH A CASE, PLEASE CONTACT YOUR TRIMBLE DEALER FOR
APPLICABLE WARRANTY INFORMATION.
Official Language
THE OFFICIAL LANGUAGE OF THESE TERMS AND CONDITIONS IS
ENGLISH . IN THE EVENT OF A CONFLICT BETWEEN ENGLISH AND OTHER
LANGUAGE VERSIONS, THE ENGLISH LANGUAGE SHALL CONTROL.
End User License Agreement for Product Software
IMPORTANT, READ CAREFULLY. THIS END USER LICENSE
AGREEMENT (“EULA”) IS A LEGAL AGREEMENT BETWEEN YOU
AND Trimble Navigation Limited (“Trimble”) and applies to the
computer software provided with the Trimble product purchased by you
(whether built into hardware circuitry as firmware, embedded in flash
memory or a PCMCIA card, or stored on magnetic or other media), or
provided as a stand-alone computer software product, and includes any
accompanying written materials such as a user's guide or product
manual, as well as any "online" or electronic documentation ("Software"
or “Product Software”). This EULA will also apply to any Software error
corrections, updates and upgrades subsequently furnished by Trimble,
unless such are accompanied by different license terms and conditions,
which will govern their use. You have acquired a Trimble Product
("Device") that includes Software, some of which was licensed by
Trimble from Microsoft Corporation or its affiliates (collectively
"Microsoft"). The Software licensed from Microsoft, as well as associated
updates, supplements, internet-based services and support services,
media, printed materials, and "online" or electronic documentation
("Microsoft Software"), are protected under this EULA. The Software is
also protected by copyright laws and international copyright treaties, as
well as other intellectual property laws and treaties. The Software is
licensed, not sold.
BY USING THE SOFTWARE, INCLUDING USE ON THIS DEVICE, YOU
ACCEPT THESE TERMS. IF YOU DO NOT ACCEPT THEM, DO NOT
USE THE DEVICE OR SOFTWARE. INSTEAD CONTACT TRIMBLE FOR
A REFUND OR CREDIT. As described below, using some features also
operates as your consent to the transmission of certain standard
computer information for Internet-based services.
WARNING: If the Software contains voice operated technologies, then
operating this Software requires user attention. Diverting attention away
from the road while driving can possibly cause an accident or other
serious consequence. Even occasional, short diversions of attention can
be dangerous if your attention is diverted away from your driving task at
a critical time. Trimble and Microsoft make no representations,
warranties or other determinations that ANY use of this Software is legal,
safe, or in any manner recommended or intended while driving or
otherwise operating a motor vehicle.
This EULA does not grant you any rights with respect to the
Windows Mobile Device Center, Microsoft ActiveSync or Microsoft
Outlook 2007 Trial which are subject to the licenses accompanying
those items.
1 SOFTWARE PRODUCT LICENSE
1.1 License Grant. Subject to the terms and conditions of this EULA,
Trimble grants you a non-exclusive right to use one copy of the Software
in a machine-readable form only as installed on the Device. Such use is
limited to use with the Device for which it was intended, as set forth in
the product documentation. The Device Software is licensed with the
Device as a single integrated product. The Device Software installed in
read only memory (“ROM”) of the Device may only be used as part of the
Device into which it was embedded. You may use the installation
Software from a computer solely to download the Software to one
Device. In no event shall the installation Software be used to download
the Software onto more than one Device. A license for the Software may
not be shared or used concurrently on different computers or Devices.
1.2 Scope of License. This EULA only gives you some rights to use the
Software. Trimble and Microsoft reserve all other rights. Unless
applicable law gives you more rights despite this limitation, you may use
the Software only as expressly permitted in this EULA. In doing so, you
must comply with any technical limitations in the Software that allow
you to use it only in certain ways. Except as expressly provided in this
EULA, rights to access the Software on this Device do not give you any
right to implement Microsoft patents or other Microsoft intellectual
property in software or devices that access this device. You may use
remote access technologies in the software such as Remote Desktop
Mobile to access the Software remotely from a computer or server. You
are responsible for obtaining any licenses required for use of the
protocols to access other software.
1.3 Proof of License. If you acquired the Software on the Device, or on a
disc or other media, a genuine Certificate of Authenticity label with a
genuine copy of the Software identifies licensed software. To be valid,
this label must be affixed to the Device, or included on or in the software
packaging. If you receive the label separately, it is not valid. You should
keep the label on the device or packaging to prove that you are licensed
to use the Software. To identify genuine Microsoft Software, see
http://www.howtotell.com.
1.4 Connectivity Software. Your Device package may include Windows
Mobile Device Center or Microsoft ActiveSync technology. If it is
included, then you may install and use it in accordance with the license
terms that are provided with it. If no license terms are provided, then
you may install and use only one (1) copy of the Software on a single
computer.
1.5 Digital Certificates. The Software uses digital certificates in X.509
format. These digital certificates are used for authentication.
1.6 Phone Functionality. If the Device Software includes phone
functionality, all or certain portions of the Device Software may be
inoperable if you do not have and maintain a service account with a
wireless telecommunication carrier (“Mobile Operator”), or if the Mobile
Operator’s network is not operating or configured to operate with the
Device.
1.7 Upgrade Software. In the event that any upgrades to the Software,
including Microsoft Software, are provided under this EULA, then the
following shall apply: you may follow the applicable instructions
accompanying this Software and install one (1) copy of the Software on
one (1) Device presently containing a licensed copy of a predecessor
version of the Software (unless this EULA indicates that this Software
copy has been licensed for installation on multiple Devices). NO
REPRESENTATION OR WARRANTY IS MADE BY TRIMBLE OR
MICROSOFT WITH RESPECT TO THE COMPATIBILITY OF THIS
SOFTWARE WITH ANY DEVICE OR ANY OTHER EXISTING
SOFTWARE OR DATA OF ANY KIND CONTAINED ON SUCH DEVICES,
AND NEITHER TRIMBLE OR MICROSOFT SHALL BE RESPONSIBLE IN
ANY REGARD WITH RESPECT TO ANY LOSS, CORRUPTION,
MODIFICATION OR INACCESSIBILITY OF ANY DATA,
APPLICATIONS OR OTHER SOFTWARE RESULTING FROM THE
INSTALLATION OF THE SOFTWARE ON ANY DEVICE.
1.8 Internet-Based Services Components. Microsoft provides Internetbased services with the software. Microsoft may change or cancel them
at any time. The Microsoft Software features described below connect to
Microsoft or service provider computer systems over the Internet. In
some cases, you will not receive a separate notice when they connect.
You may switch off some of these features or not use them. For more
information about these features, visit
http://go.microsoft.com/fwlink/?LinkId=81931. By using these features,
you consent to the transmission of this information. Microsoft does
not use the information to identify or contact you. You may not use
these services in any way that could harm them or impair anyone else’s
use of them. You may not use the services to try to gain unauthorized
access to any service, data, account or network by any means.
1.9 Device Information. The following features use Internet protocols,
which send to the appropriate systems device information, such as your
Internet protocol address, the type of operating system, browser and
name and version of the Software you are using, and the language code
of the Device where you installed the Software. Microsoft uses this
information to make the Internet-based services available to you. a)
Update Features: Windows Mobile Update feature provides you the
ability to obtain and install Software updates on your Device if updates
are available. You may choose not to use this feature. Trimble and/or
your Mobile Operator may not support this feature or an update for your
device. b) Security Updates/Digital Rights Management. Content
owners use Windows Media digital rights management technology
(WMDRM) to protect their intellectual property, including copyrights.
This software and third party software use WMDRM to play and copy
WMDRM-protected content. If the software fails to protect the content,
content owners may ask Microsoft to revoke the software's ability to use
WMDRM to play or copy protected content. Revocation does not affect
other content. When you download licenses for protected content, you
agree that Microsoft may include a revocation list with the licenses.
Content owners may require you to upgrade WMDRM to access their
content. Microsoft software that includes WMDRM will ask for your
consent prior to the upgrade. If you decline an upgrade, you will not be
able to access content that requires the upgrade.
1.10 Additional Software/Services. The Device Software may permit
Trimble, Microsoft, their affiliates and/or their designated agent to
provide or make available to you Software updates, supplements, add-on
components, or Internet-based services components of the Software
after the date you obtain your initial copy of the Software
(“Supplemental Components”).
1.10.1 If Trimble provides or makes available to you Supplemental
Components and no other end user license agreement terms are
provided along with the Supplemental Components, then the terms
of this EULA shall apply.
1.10.2 If Microsoft, its affiliates and/or its designated agent makes
available Supplemental Components, and no other end user license
agreement terms are provided, then the terms of this EULA shall
apply, except that the Microsoft entity or affiliate entity providing
the Supplemental Component(s) shall be the licensor of the
Supplemental Component(s).
1.10.3 Trimble, Microsoft and each of their affiliates and/or their
designated agents reserve the right to discontinue any Internetbased services provided to you or made available to you through
the use of the Device Software.
1.11 Links to Third Party Sites. If the Software provides links to third
party websites, those links are provided to you only as a convenience,
and the inclusion of any link does not imply an endorsement of the third
party website by Microsoft or Trimble.
1.12 Other Rights and Limitations. (1) The Software contains valuable
trade secrets proprietary to Trimble and its suppliers. To the extent
permitted by relevant law, you shall not, nor allow any third party to
copy, decompile, disassemble or otherwise reverse engineer the Software,
or attempt to do so, provided, however, that to the extent any applicable
mandatory laws (such as, for example, national laws implementing EC
Directive 91/250 on the Legal Protection of Computer Programs) give
you the right to perform any of the aforementioned activities without
Trimble's consent in order to gain certain information about the
Software for purposes specified in the respective statutes (i.e.,
interoperability), you hereby agree that, before exercising any such rights,
you shall first request such information from Trimble in writing detailing
the purpose for which you need the information. Only if and after
Trimble, at its sole discretion, partly or completely denies your request,
may you exercise such statutory rights. (2) This Software is licensed as a
single product. You may not separate its component parts for use on
more than one computer nor make more copies of the software than
specified in this EULA. (3) You may not rent, lease, or lend the Software.
(4) No service bureau work, multiple-user license or time- sharing
arrangement is permitted. For purposes of this EULA “service
Juno Series Handhelds User Guide
bureau work” shall be deemed to include, without limitation, use of the
Software to process or to generate output data for the benefit of, or for
purposes of rendering services to any third party over the Internet or
other communications network. (5) You may make one backup copy of
the Software. You may use it only to reinstall the Software on the Device.
(6) You may transfer the Software only with the Device, the Certificate of
Authenticity label, and these license terms directly to a third party.
Before the transfer, that party must agree that these license terms apply
to the transfer and use of the Software. You may not retain any copies of
the Software including the backup copy. (7) The Software is subject to
United States export laws and regulations. You must comply with all
domestic and international export laws and regulations that apply to the
Software. These laws include restrictions on destinations, end users, and
end use. For additional information see
http://www.microsoft.com/exporting. (8) Without prejudice as to any
other rights, Trimble may terminate this EULA without notice if you fail
to comply with the terms and conditions of this EULA. In such event,
you must destroy all copies of the Software and all of its component
parts. (9) If the Microsoft Software includes speech recognition
component(s), you should understand that speech recognition is an
inherently statistical process and that recognition errors are inherent in
the process. Neither Trimble, Microsoft, nor any of their suppliers shall
be liable for any damages arising out of errors in the speech recognition
process. (10) You may not publish the Software for others to copy. (11)
You may not use the Software for commercial software hosting services.
1.13 Notice Regarding the MPEG-4 Visual Standard. The Software may
include MPEG-4 visual decoding technology. This technology is a format
for data compression of video information. MPEG LA, L.L.C. requires this
notice: USE OF THIS PRODUCT IN ANY MANNER THAT COMPLIES
WITH THE MPEG-4 VISUAL STANDARD IS PROHIBITED, EXCEPT FOR
USE DIRECTLY RELATED TO (A) DATA OR INFORMATION (i)
GENERATED BY AND OBTAINED WITHOUT CHARGE FROM A
CONSUMER NOT THEREBY ENGAGED IN A BUSINESS ENTERPRISE,
AND (ii) FOR PERSONAL USE ONLY; AND (B) OTHER USES
SPECIFICALLY AND SEPARATELY LICENSED BY MPEG LA, L.L.C. If you
have questions about the MPEG-4 visual standard, please contact MPEG
LA, L.L.C., 250 Steele Street, Suite 300, Denver, CO
80206; www.mpegla.com.
1.14 If the Device Software is provided by Trimble separate from the
Device on media such as a ROM chip, CD ROM disk(s) or via web
download or other means, and is labeled “For Upgrade Purposes Only”
you may install one (1) copy of such Device Software onto the Device as
a replacement copy for the existing Device Software and use it
accordance with this EULA, including any additional end user license
agreement terms accompanying the upgrade Device Software.
1.15 If any software component(s) is provided by Trimble separate from
the Device on CD ROM disc(s) or via web download or other means, and
labeled “For Upgrade Purposes Only,” you may (i) install and use one (1)
copy of such component(s) on the computer(s) you use to exchange data
with the Device as a replacement copy for the existing Companion CD
component(s).
1.16 Copyright. All title and copyrights in and to the Software (including
but not limited to any images, photographs, animations, video, audio,
music, text and “applets,” incorporated into the Software), the
accompanying printed materials, and any copies of the Software are
owned by Trimble, or Microsoft (including Microsoft Corporation), and
their respective suppliers. You may not copy the printed materials
accompanying the Software. All title and intellectual property rights in
and to the content which may be accessed through use of the Software is
the property of the respective content owner and may be protected by
applicable copyright or other intellectual property laws and treaties. This
EULA grants you no rights to use such content. You shall not remove,
cover or alter any of Trimble’s patent, copyright or trademark notices
placed upon, embedded in or displayed by the Software or on its
packaging and related materials. All rights not specifically granted in
this EULA are reserved by Trimble, Microsoft, and their respective
suppliers.
1.17 U.S. Government Restricted Rights. The Software is provided with
“RESTRICTED RIGHTS”. Use, duplication, or disclosure by the United
States Government is subject to restrictions as set forth in this EULA,
and as provided in DFARS 227.7202-1(a) and 227.7202-3(a) (1995),
DFARS 252.227-7013(c)(1)(ii) (OCT 1988), FAR 12.212(a) (1995), FAR
52.227-19, or FAR 52.227-14(ALT III), as applicable.
1.18 Microsoft has contractually obligated Trimble to include the
following terms in this EULA:
Product Support. The Product support for the Software is not
provided by Microsoft or its affiliates or subsidiaries. For product
support, please refer to the Trimble support number provided in the
documentation for the Device.
Not fault tolerant. The Software is not fault tolerant. Trimble
installed the Software on the Device and is responsible for how it
operates on the Device.
Juno Series Handhelds User Guide
Restricted user. The Microsoft Software was designed for systems
that do not require fail-safe performance. You may not use the
Microsoft Software in any device or system in which a malfunction
of the Microsoft Software would result in foreseeable risk of injury
or death to any person. This includes operation of nuclear facilities,
aircraft navigation or communication systems and air traffic
control.
No warranties for the software. Microsoft gives no express
warranties, guarantees or conditions regarding the Microsoft
Software. Any warranties you receive regarding the Device or the
Software do not originate from, and are not binding on, Microsoft or
its affiliates. When allowed by your local laws, Trimble and
Microsoft exclude implied warranties of merchantability, fitness for
a particular purpose and non-infringement.
LIABILITY LIMITATIONS. You can recover from Microsoft and its
affiliates only direct damages up to fifty U.S. Dollars (U.S. $50.00), or
equivalent in local currency. You cannot recover any other damages,
including consequential, lost profits, special, indirect or incidental
damages. This limitation applies to:
– Anything related to the Software, services, content
(including code) on third party internet sites, or third party
programs, and
– claims for breach of contract, breach of warranty, guarantee
or condition, strict liability, negligence, or other tort to the
extent permitted by applicable law.
It also applies even if Microsoft should have been aware of the
possibility of the damages. The above limitation may not apply to
you because your country may not allow the exclusion or limitation
of incidental, consequential or other damages.
2 LIMITED WARRANTY FOR TRIMBLE PRODUCT SOFTWARE.
2.1 Limited Warranty. Trimble warrants that the Software, exclusive of
the Microsoft Software, will perform substantially in accordance with
the accompanying written materials for a period of twelve (12) months
from the date of purchase. This limited warranty gives you specific legal
rights; you may have others, which vary from state/jurisdiction to
state/jurisdiction. The above limited warranty does not apply to Fixes,
Minor Updates, or Major Upgrades of the Software after expiration of the
twelve (12) month limited warranty period, all of which are provided “AS
IS” and without warranty unless otherwise specified in writing by
Trimble. Because the Software is inherently complex and may not be
completely free of nonconformities, defects or errors, you are advised to
verify your work. Trimble does not warrant that the Software will
operate error free or uninterrupted, will meet your needs or
expectations, or that all nonconformities can or will be corrected.
2.2 Software Fixes. During the limited warranty period described in
section 2.1 above, you will be entitled to receive such Fixes to the
Product Software that Trimble releases and makes commercially
available and for which it does not charge separately, subject to the
procedures for delivery to purchasers of Trimble products generally. If
you have purchased the Product from an authorized Trimble dealer
rather than from Trimble directly, Trimble may, at its option, forward the
software Fix to the Trimble dealer for final distribution to you. Minor
Updates, Major Upgrades, new products, or substantially new software
releases, as identified by Trimble, are expressly excluded from this
update process and limited warranty. Receipt of Software Fixes or other
enhancements shall not serve to extend the limited warranty period.
For purposes of this warranty the following definitions shall apply: (1)
"Fix(es)" means an error correction or other update created to fix a
previous software version that does not substantially conform to its
Trimble specifications; (2) "Minor Update" occurs when enhancements
are made to current features in a software program; and (3) "Major
Upgrade" occurs when significant new features are added to software, or
when a new product containing new features replaces the further
development of a current product line. Trimble reserves the right to
determine, in its sole discretion, what constitutes a Fix, Minor Update, or
Major Upgrade.
2.3 Customer Remedies. Trimble’s and its suppliers’ entire liability, and
your sole remedy, with respect to the Software shall be either, at
Trimble’s option, (a) repair or replacement of the Software, or (b) return
of the license fee paid for any Software that does not meet Trimble’s
limited warranty. This limited warranty is void if failure of the Software
has resulted from (1) accident, misuse, abuse, or misapplication; (2)
alteration or modification of the Software without Trimble’s
authorization; (3) interaction with software or hardware not supplied or
supported by Trimble; (4) your improper, inadequate or unauthorized
installation, maintenance or storage; or (5) if you violate the terms of
this EULA. Any replacement Software will be warranted for the
remainder of the original warranty period or thirty (30) days, whichever
is longer.
2.4 NO OTHER WARRANTIES. TO THE MAXIMUM EXTENT
PERMITTED BY APPLICABLE LAW, TRIMBLE AND ITS SUPPLIERS
DISCLAIM ALL OTHER WARRANTIES, TERMS AND CONDITIONS,
EITHER EXPRESS OR IMPLIED, BY STATUTE, COMMON LAW OR
OTHERWISE, INCLUDING BUT NOT LIMITED TO, IMPLIED
WARRANTIES, TERMS AND CONDITIONS OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND
NONINFRINGEMENT WITH REGARD TO THE SOFTWARE, ITS
SATISFACTORY QUALITY AND THE PROVISION OF OR FAILURE TO
PROVIDE SUPPORT SERVICES. TO THE EXTENT ALLOWED BY
APPLICABLE LAW, IMPLIED WARRANTIES, TERMS AND
CONDITIONS ON THE SOFTWARE ARE LIMITED TO NINETY (90)
DAYS. Y0U MAY HAVE OTHER LEGAL RIGHTS WHICH VARY FROM
STATE/JURISDICTION TO STATE/JURISDICTION.
NO WARRANTIES FOR THE MICROSOFT SOFTWARE. THE
MICROSOFT SOFTWARE is provided “AS IS” and with all faults, AND
TRIMBLE PROVIDES NO WARRANTY WITH RESPECT THERETO. THE
ENTIRE RISK AS TO SATISFACTORY QUALITY, PERFORMANCE,
ACCURACY AND EFFORT (INCLUDING LACK OF NEGLIGENCE) FOR
THE MICROSOFT SOFTWARE IS WITH YOU. ALSO, THERE IS NO
WARRANTY AGAINST INTERFERENCE WITH YOUR ENJOYMENT OF
THE MICROSOFT SOFTWARE OR AGAINST INFRINGEMENT.
2.5 PLEASE NOTE: THE FOREGOING TRIMBLE LIMITED WARRANTY
PROVISIONS MAY NOT APPLY TO SOFTWARE PRODUCT LICENSES
PURCHASED IN THOSE JURISDICTIONS (SUCH AS COUNTRIES OF THE
EUROPEAN UNION) IN WHICH PRODUCT WARRANTIES ARE OBTAINED
FROM THE LOCAL DISTRIBUTOR. IN SUCH CASES, PLEASE CONTACT
YOUR TRIMBLE DEALER FOR APPLICABLE WARRANTY INFORMATION.
3 TRIMBLE LIMITATION OF LIABILITY.
3.1 LIMITATION OF LIABILITY. TO THE MAXIMUM EXTENT
PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL TRIMBLE
OR ITS SUPPLIERS BE LIABLE FOR ANY SPECIAL, INCIDENTAL,
INDIRECT, CONSEQUENTIAL OR PUNITIVE DAMAGES HOWEVER
CAUSED AND REGARDLESS OF THE THEORY OF LIABILITY
(INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF
BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS
INFORMATION, OR ANY OTHER PECUNIARY LOSS) ARISING OUT OF
THE USE OR INABILITY TO USE THE SOFTWARE, OR THE
PROVISION OF OR FAILURE TO PROVIDE SUPPORT SERVICES, EVEN
IF TRIMBLE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES AND NOTWITHSTANDING ANY FAILURE OF ESSENTIAL
PURPOSE OF ANY EXCLUSIVE REMEDY PROVIDED IN THIS EULA.
IN NO EVENT SHALL THE TOTAL CUMULATIVE LIABILITY OF
TRIMBLE AND ITS SUPPLIERS IN CONNECTION WITH THIS EULA
OR THE SOFTWARE, WHETHER BASED ON CONTRACT, WARRANTY,
TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR
OTHERWISE, EXCEED THE ACTUAL AMOUNT PAID TO TRIMBLE
FOR THE SOFTWARE LICENSE GIVING RISE TO THE CLAIM.
BECAUSE SOME STATES AND JURISDICTIONS DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL
OR INCIDENTAL DAMAGES, THE ABOVE LIMITATION MAY NOT
APPLY TO YOU.
4 GENERAL.
4.1 This EULA shall be governed by the laws of the State of California
and applicable United States Federal law without reference to “conflict of
laws” principles or provisions. The United Nations Convention on
Contracts for the International Sale of Goods will not apply to this EULA.
Jurisdiction and venue of any dispute or court action arising from or
related to this EULA or the Software shall lie exclusively in or be
transferred to the courts the County of Santa Clara, California, and/or
the United States District Court for the Northern District of California.
You hereby consent and agree not to contest, such jurisdiction, venue
and governing law.
4.2 Section 4.1 notwithstanding, if you acquired this product in Canada,
this EULA is governed by the laws of the Province of Ontario, Canada. In
such case each of the parties to this EULA irrevocably attorns to the
jurisdiction of the courts of the Province of Ontario and further agrees to
commence any litigation that may arise under this EULA in the courts
located in the Judicial District of York, Province of Ontario. If you
acquired this product in the European Union, this EULA is governed by
the laws of The Netherlands, excluding its rules governing conflicts of
laws and excluding the United Nations Convention on the International
Sale of Goods. In such case each of the parties to this EULA irrevocably
attorns to the jurisdiction of the courts of The Netherlands and further
agrees to commence any litigation that may arise under this EULA in the
courts of The Hague, The Netherlands.
4.3 Trimble reserves all rights not expressly granted by this EULA.
4.4 Official Language. The official language of this EULA and of any
documents relating thereto is English. For purposes of interpretation, or
in the event of a conflict between English and versions of this EULA or
related documents in any other language, the English language version
shall be controlling.
Juno Series Handhelds User Guide
Registration
To receive information regarding updates and new products, please
contact your local dealer or visit the Trimble website at
www.trimble.com/register. Upon registration you may select the
newsletter, upgrade, or new product information you desire.
Notices
Class B statement- Notice to users This equipment has been tested and
found to comply with the limits for a Class B digital device pursuant to
Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference
that may cause undesired operation.
This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions may
cause harmful interference to radio communication.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and the receiver.
– Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Changes and modifications not expressly approved by the manufacturer
or registrant of this equipment can void your authority to operate this
equipment under Federal Communications Commission rules.
The radio devices used by this equipment are classified under 47 CFR
§15.247 as spread spectrum transmitter equipment. In accordance with
OET Bulletin 65 supplement C Edition 1-01, the device operates at low
power levels where there is a high likelihood of compliance with the RF
exposure standards, is categorically excluded from routine
environmental evaluation as set forth in CFR 47 section 2.1093. The
radiated output power of this equipment produces a calculated SAR that
is significantly below the FCC radio frequency exposure limits.
Equipment that is additionally fitted with a wireless GSM/UMTS is
certified to satisfy US requirements as stipulated in 47 CFR Parts 22 and
24.
The external antenna connector provided in this device is for GPS
antennas only.
aGPS and emergency calls (TNJ32 handheld only)
When you make an emergency call, your phone can use assisted Global
Positioning System (aGPS) satellite signals to tell the emergency
response center your approximate location.
The aGPS functionality may be limited, so:
– Always tell the emergency response center your best knowledge of
your location.
– Remain on the phone for as long as the emergency response center
instructs you.
– aGPS might not work for emergency calls if your local emergency
response center does not process aGPS location information. For
details, contact your local authorities.
aGPS performance
For best results:
– Go outside and away from underground locations, covered vehicles,
structures with metal or concrete roofs, tall buildings, and tree cover.
Indoor performance might improve if you move closer to
unobstructed windows.
– Move away from electronic devices that might interfere with or block
aGPS satellite signals, for example radios and entertainment
equipment.
If your phone cannot find strong aGPS satellite signals, the location of
the nearest cell tower in contact with your phone is automatically
provided to the emergency response center.
aGPS technology
This mobile device incorporates aGPS technology in order to comply
with emergency caller location requirements. aGPS technology also can
be used in other applications to track and monitor a user's location-for
example, to provide location specific data. Users who do not want such
tracking and monitoring should avoid using such applications. aGPS uses
your wireless service provider's network and therefore airtime, data
charges, and/or additional charges may apply in accordance with your
service plan. Contact your wireless service provider for details.
Note - this service is not provided by all networks. Please contact your
cellular service provider if you wish to confirm that this service is provided.
Canada
This Class B digital apparatus complies with Canadian ICES-003.
This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus as set out in the radio interference
regulations of the Canadian Department of Communications.
Cet appareil numérique de la classe B est conforme à la norme NNB-003
du Canada.
Le présent appareil numérique n'émet pas de bruits radioélectriques
dépassant les limites applicables aux appareils numériques de Classe B
prescrites dans le règlement sur le brouillage radioélectrique édicté par
le Ministère des Communications du Canada.
Europe
This product has been tested and found
to comply with all requirements for CE
Marking and sale within the European
Economic Area (EEA). It is classified and
marked as being Class 2 Radio Equipment under 2000/299/EC, as
Bluetooth and Wi-Fi approvals are country specific. Please consult your
local distributor for more information.
The Juno series handheld has Bluetooth and Wi-Fi approval in most EU
countries, and the TNJ31 and TNJ32 are also compliant with GSM and UMTS
conformity assessment requirements specified by the European Council
Directive, Radio and Telecommunication Terminal Equipment
1999/5/EC. These requirements provide reasonable protection against
harmful interference when the equipment is operated appropriately in a
residential or commercial environment.
Australia and New Zealand
This product conforms with the regulatory requirements of the
Australian Communications and Media Authority (ACMA) EMC
and Radiocommunications framework, thus satisfying the
requirements for C-Tick Marking and sale within Australia and
New Zealand.
Equipment that is additionally fitted with a wireless
GSM/UMTS satisfies the requirements for A-Tick Marking
and sale in Australia and New Zealand. The A-Tick Marking is
an indication to the user that the product is suitable for
connection
to a telecommunications network operated by a carrier or carriage
service provider.
Taiwan – Battery Recycling Requirements
The product contains an internal Lithium-ion battery. Taiwanese
regulations require that waste batteries are recycled. ㅱ榊㻯
嵚⥭㟅
Notice to Our European Union Customers
For product recycling instructions and more information, please go to
www.trimble.com/ev.shtml.
Recycling in Europe: To recycle Trimble WEEE (Waste Electrical
and Electronic Equipment, products that run on electrical
power.), Call +31 497 53 24 30, and ask for the "WEEE Associate".
Or, mail a request for recycling instructions to:
Trimble Europe BV
c/o Menlo Worldwide Logistics
Meerheide 45
5521 DZ Eersel, NL
Juno Series Handhelds User Guide
Juno Series Handhelds User Guide
Safety information
The Trimble® Juno® series handhelds contain a Bluetooth® radio and a Wi-Fi radio.
The TNJ32 handheld also contains a GSM/UMTS. In some situations, you may be
required to turn off the radios. For example, aviation authority regulations restrict the
use of radios on board aircraft.
Turning off the integrated radios
To prevent the handheld from emitting radio signals, do one of the following:
•
To turn off the handheld, press and hold the Power button to display the Power
menu, then tap Shutdown.
•
To turn off the Bluetooth, Wi-Fi, and GSM/UMTS radios:
a.
Tap the title bar on the Home or Start screen, and then on the pull-down
list, tap the
or
icon.
b.
In the Connectivity or the Phone dialog, select Wireless Manager.
c.
Tap All to turn off all radios. The status fields below the Wi-Fi, Bluetooth,
and Phone buttons change to Off.
Deactivating the integrated radios
The Juno series handheld is shipped with Wi-Fi and Bluetooth wireless technology
activated. You may need to deactivate the Wi-Fi and/or Bluetooth radio in the
handheld if the country in which you are working does not approve the use of Wi-Fi
and/or Bluetooth wireless technology. If you are unsure about whether the Juno series
handheld’s radios are approved for use in your country, check with your Trimble
reseller.
Use the Radio Activation Manager software to deactivate the integrated Wi-Fi and/or
Bluetooth radio, or to reactivate the radios if they have been deactivated. The Radio
Activation Manager software runs on an office computer.
The latest copy of the software is available for download from the Trimble website. Go
to www.trimble.com/support.shtml, click the link for your receiver type, ( TNJ31 or TNJ32),
click Downloads, click Juno Series and then click Radio Activation Manager.
Exposure to radio frequency radiation from Bluetooth and Wi-Fi
transmitters
This device is approved as a portable device with respect to Radio Frequency (RF)
exposure compliance. The radiated output power of the internal wireless radio
transmitters is less than 10 milliWatt, which results in exposure levels far below the
FCC radio frequency exposure limits, even when operated in close proximity to the
body. The internal wireless radios operate within guidelines found in international
radio frequency safety standards and recommendations, which reflect the consensus
of the international scientific community. Trimble therefore believes the internal
Juno Series Handhelds User Guide
wireless radios are safe for use by users. The level of electromagnetic energy emitted is
hundreds of times lower than the electromagnetic energy emitted by wireless devices
such as mobile phones. However, the use of wireless radios may be restricted in some
situations or environments, such as on aircraft. If you are unsure of restrictions, you are
encouraged to ask for authorization before turning on the wireless radios.
Exposure to radio frequency radiation from cellular wireless transmitters
Juno series handheld equipment uses cellular wireless radios that have been designed
and manufactured to meet safety requirements for limiting exposure to radio waves.
When used in accordance with the instructions set forth in this manual, the
equipment has been independently verified to not exceed the emission limits for safe
exposure to radio frequency (RF) energy as specified by the Federal Communications
Commission of the U.S. Government in 47 CFR §2.1093.
These limits are part of comprehensive guidelines and establish permitted levels of RF
energy for the general population. The guidelines are based on standards that were
developed by independent scientific organization through periodic and thorough
evaluation of scientific studies. The standards include a substantial safety margin
designed to assure the safety of all persons, regardless of age and health.
The exposure standard for all wireless devices employs a unit of measurement known
as the Specific Absorption Rate, or SAR; the SAR limit set by the FCC1 is 1.6W/kg.
Tests for SAR on the Juno series handhelds have been undertaken using the standard
operating positions adopted by the FCC that test the device for SAR while it is
transmitting at the highest certified power level in all tested frequency bands.
The FCC has granted an Equipment Authorization for this device on the basis that all
reported SAR levels have been evaluated to be compliant with the FCC RF exposure
guidelines.
SAR information on this device is on file with the FCC and can be found under the
Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID:
JUP96410 (model TNJ31) or JUP96420 (phone model TNJ32).
For documentation relating to the SAR values of the Juno series handhelds, go to the
Trimble Support website at www.trimble.com/support.shtml, select the required Juno
series handheld ( TNJ31 or TNJ32), select the Technical Support tab, and then click
Compliance Information.
1.
In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg
(W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety .
Juno Series Handhelds User Guide
AC adaptor safety
To charge the handheld’s battery, use the international adaptor kit provided with the
Juno series handheld (see Powering the handheld, page 17).
WARNING – To use AC adaptors safely:
– Use only the AC adaptor intended for the Juno series handheld. Using any other AC
adaptor can damage the handheld and may void your warranty. Do not use the AC
adaptor with any other product.
– Make certain that the input voltage on the adaptor matches the voltage and frequency
in your location.
– Make certain that the adaptor has prongs compatible with your outlets.
– Do not use the AC adaptor in wet outdoor areas; it is designed for indoor use only.
– Unplug the AC adaptor from power when not in use.
– Do not short the output connector.
– Be aware that there are no user-serviceable parts in this product.
– If the AC adaptor becomes damaged, replace it with a new Trimble AC adaptor..
Battery safety
The rechargeable Lithium-ion battery is supplied partially charged. Charge the battery
completely before using it for the first time (see Powering the handheld, page 17). If the
battery has been stored for longer than six months, charge it before use.
10
WARNING – Use only the battery intended for the Juno series handheld. Using any other
WARNING – Do not damage the rechargeable Lithium-ion battery. A damaged battery
can cause an explosion or fire, and can result in personal injury and/or property damage.
To prevent injury or damage:
– Do not use or charge the battery if it appears to be damaged. Signs of damage include,
but are not limited to, discoloration, warping, and leaking battery fluid.
– Do not store or leave your device near a heat source such as near a fireplace or other
heat-generating appliance, or otherwise expose it to temperatures in excess of 70 °C
(158 °F) such as on a vehicle dashboard. When heated to excessive temperatures, battery
cells could explode or vent, posing a risk of fire.
– Do not immerse the battery in water.
– Do not use or store the battery inside a vehicle during hot weather.
– Do not drop or puncture the battery.
– Do not open the battery or short-circuit its contacts.
WARNING – Avoid contact with the rechargeable Lithium-ion battery if it appears to be
leaking. Battery fluid is corrosive, and contact with it can result in personal injury and/or
property damage.
To prevent injury or damage:
– If the battery leaks, avoid contact with the battery fluid.
– If battery fluid gets into your eyes, immediately rinse your eyes with clean water and
seek medical attention. Do not rub your eyes!
– If battery fluid gets onto your skin or clothing, immediately use clean water to wash off
the battery fluid.
battery can damage the handheld and may void your warranty. If the battery becomes
damaged or stops charging fully, replace it with a new battery.
Juno Series Handhelds User Guide
C
WARNING – Charge and use the rechargeable Lithium-ion battery only in strict
accordance with the instructions. Charging or using the battery in unauthorized
equipment can cause an explosion or fire, and can result in personal injury and/or
equipment damage.
To prevent injury or damage:
– Do not charge or use the battery if it appears to be damaged or leaking.
– Charge the Lithium-ion battery only in a Trimble product that is specified to charge it.
Be sure to follow all instructions that are provided with the battery charger.
– Discontinue charging a battery that gives off extreme heat or a burning odor.
– Use the battery only in Trimble equipment that is specified to use it.
– Use the battery only for its intended use and according to the instructions in the product
documentation.
Note – Many administrations have regulations relating to the recycling or safe disposal of
batteries. Please consult http://www.trimble.com/about_ev.shtml for more information.
Memory card use
The Juno series handheld provides a memory card slot, providing an alternative
storage location to the storage memory in the handheld.
WARNING – Static electricity can harm electronic components inside your handheld. To
WARNING – The presence of any dust or moisture in the memory card slot may adversely
prevent static damage:
– Discharge static electricity from your body before you touch any of the electronic
components inside your device, such as a memory module. You can do so by touching an
unpainted metal surface.
affect the device and void your Trimble warranty. To prevent dust or moisture entering
the memory card slot:
– When inserting or removing a memory card, place the handheld on a dust-free indoor
surface.
External GPS antenna use
The Juno series handheld provides an external GPS antenna port. This port is for GPS
antennas only.
WARNING – The presence of any dust or moisture in the external antenna port may cause
the external antenna to not work. To prevent dust or moisture entering the external
antenna slot, take care when using the handheld with an external antenna in wet or
dusty conditions.
Juno Series Handhelds User Guide
11
About the Juno series handhelds
The Juno series handhelds includes the TNJ31 and
TNJ32 handhelds. These rugged handhelds are
rated IP54, and combine a high sensitivity GNSS
receiver with the Windows® Embedded Handheld
6.5 Professional operating system.
The Juno series handhelds have built-in Bluetooth®
wireless technology for cable-free connection to
other devices, Wi-Fi connectivity for connections
to networks, and an integrated 5MP camera with
autofocus and flash.
The TNJ32 handheld also has an integrated
GSM/UMTS for downloading and transmitting
data, with support for voice calls and text
messaging.
The integrated GNSS receiver provides accurate
positioning information within 3 meters when
using postprocessed or 5 meters with real-time differential corrections. For more
information, see Using the GNSS receiver, page 73.
About this user guide
The Juno Series Handhelds User Guide describes how to set up and use the Juno series
handheld. The information in this guide supplements the information in the Juno
Series Quick Start Guide, which you received with the handheld.
This guide describes how to:
•
get started with the Juno series handheld
•
use the Windows Embedded Handheld 6.5 Professional operating system.
•
use the GSM/UMTS in the TNJ32 handheld only.
•
synchronize information between a computer and the handheld.
•
exchange information between the handheld and other devices.
•
connect to the Internet or to a computer network.
•
use the handheld’s integrated GNSS receiver.
•
use the handheld’s integrated camera.
Even if you have used other Global Navigation Satellite System (GNSS) or Global
Positioning System (GPS) products before, Trimble recommends that you spend some
time reading this guide to learn about the special features of the product.
12
Juno Series Handhelds User Guide
Collecting GNSS data
To collect GNSS data with the Juno series handheld, you must install GNSS field
software onto the handheld.
You can use the Juno series handheld with compatible Mapping and GIS field and
office software. For version numbers and a complete list, see the Product Compatibility
List on www.trimble.com.
For more information on using the integrated GNSS receiver, see Using the GNSS
receiver, page 73.
What’s in the box?
When you unpack the Juno series handheld, check that you have received all the
components:
Battery
Quick Start Guide
Mini USB cable
Wrist
lanyad
Juno series handheld
Universal power
supply
Stylus
Stylus tether
Inspect all contents for visible damage (scratches, dents) and if any components
appear damaged, notify the shipping carrier. Keep the shipping and packaging material
for the carrier’s inspection
Juno Series Handhelds User Guide
13
Accessories
The following optional accessories are available:
•
Vehicle power adaptor
•
Replacement stylus (2 pack)
•
Carry case with belt clip
•
•
External patch antenna
Replacement International AC
adaptor
•
Screen protectors (2 pack)
anti-glare or ultra-clear
•
Replacement battery
•
External battery charger
•
Vehicle mount
•
Replacement wrist strap
•
Pole mount
For more information, go to LINKS.
Use and care of the handheld
When using the handheld:
•
Protect the touch screen by using your finger or the stylus provided, and avoid
using excessive pressure and sharp or abrasive objects. To protect the touch
screen from pressure and abrasive objects, Trimble recommends that you apply
a screen protector.
•
Keep the outer surface free of dirt and dust.
•
Ensure that protective covers are appropriately fitted to the external antenna
port, USB and power connectors, so that they are kept free from dirt, dust, fluid
ingress, and electrostatic discharge.
•
Protect the handheld from extreme temperatures. For example, do not leave the
handheld on the dashboard of a vehicle.
•
The handheld is rated IP54, but is not waterproof. Do not immerse the handheld
in water, and be careful not to drop the handheld or subject it to any strong
impact.
To clean the handheld, wipe it with a clean dry cloth.
Storage
If you are not going to use the handheld for three months or more, Trimble
recommends that you do not leave the handheld in Suspend mode (see page 21).
Instead, partially charge the battery and then turn off the handheld.
To prepare the Juno series handheld for storage:
14
1.
Transfer any data that you need to an office computer.
2.
Charge the battery to approximately 30%.
Juno Series Handhelds User Guide
3.
Press and hold the Power button to display the Power menu, then tap
Shutdown.
4.
Store the handheld at room temperature.
To use the Juno series handheld after storage:
1.
Press the Power key to turn on the handheld.
2.
Recharge the battery (see Charging the battery, page 19).
Technical assistance
Go to the Juno series handheld technical support page on the Trimble website
(www.trimble.com/mappingGIS/juno3d.aspx or
(www.trimble.com/mappingGIS/juno3b.aspx for the latest support information,
including:
•
FAQs
•
support notes detailing support issues
•
documentation
•
the latest files available for download
Additional help
If you still cannot find the information that you need, contact your Trimble reseller.
Windows error reporting
If for any reason a Microsoft Windows Error Reporting dialog appears, indicating that
the handheld or Trimble field software has encountered a problem and needs to close,
you are prompted to send an error report to Microsoft.
Trimble recommends that you click Send and then click any subsequent links that are
used to obtain additional information.
Trimble can access the report that is sent to Microsoft and use it to improve the Juno
series handheld handheld.
Juno Series Handhelds User Guide
15
Getting started
This section describes the main features of the Juno series handheld, and provides the
information you need to get up and running with the handheld.
Parts of the Juno series handheld
The following pages show the main parts of the handheld.
Power button
(LED surround)
Earpiece
External GPS
antenna port
Soft keys
Camera button
Microphone
Reset button
Start
Figure 1.1
Juno series handheld – TNJ31 and TNJ32 - front view
The function of each key is described below:
16
Key
Description
Start
Press to display the Windows Embedded Handheld Start
screen.
Camera
Press to start the Camera application (see Using the camera,
page 79).
Soft keys
By default these keys perform the same action as the left and
right softkeys in the menu bar.
Alternatively, program these keys to perform a selected
action. To program the keys, use the Buttons control (see
Buttons, page 33).
Tip – To lock the screen and handheld keys without turning off the handheld, use the
device lock option (see Device lock, page 36).
Juno Series Handhelds User Guide
Stylus and wrist
lanyard tether
Stylus
Power connector
Mini USB socket
Figure 1.2
Juno series handheld – bottom view
Camera flash
(TNJ32 only)
Camera lens
Speaker
Back cover lock
Figure 1.3
Juno series handheld - back view
Powering the handheld
The Juno series handheld contains a rechargeable Lithium-ion battery.
Note – Charge the battery completely before using the handheld for the first time. If the
battery has been stored for longer than six months, charge it before use. Trimble
recommends charging the battery for four hours to recharge it fully.
Note – Cold temperatures, or using Bluetooth wireless technology or Wi-Fi connectivity, or
using the GSM/UMTS consumes additional battery power and so shortens battery life
between charges.
Juno Series Handhelds User Guide
17
AC adaptor safety
WARNING – To use AC adaptors safely:
– Use only the AC adaptor intended for the Juno series handheld handheld. Using any
other AC adaptor can damage the handheld and may void your warranty. Do not use
the AC adaptor with any other product.
– Make certain that the input voltage on the adaptor matches the voltage and frequency
in your location.
– Make certain that the adaptor has prongs compatible with your outlets.
– Do not use the AC adaptor in wet outdoor areas; it is designed for indoor use only.
– Unplug the AC adaptor from power when not in use.
– Do not short the output connector.
– Be aware that there are no user-serviceable parts in this product.
– If the AC adaptor becomes damaged, replace it with a new Trimble AC adaptor.
Battery safety
18
WARNING – Do not damage the rechargeable Lithium-ion battery. A damaged battery
can cause an explosion or fire, and can result in personal injury and/or property damage.
To prevent injury or damage:
– Do not use or charge the battery if it appears to be damaged. Signs of damage include,
but are not limited to, discoloration, warping, and leaking battery fluid.
– Do not store or leave your device near a heat source such as near a fireplace or other
heat-generating appliance, or otherwise expose it to temperatures in excess of 70 °C
(158 °F) such as on a vehicle dashboard. When heated to excessive temperatures, battery
cells could explode or vent, posing a risk of fire.
– Do not immerse the battery in water.
– Do not use or store the battery inside a vehicle during hot weather.
– Do not drop or puncture the battery.
– Do not open the battery or short-circuit its contacts.
WARNING – Avoid contact with the rechargeable Lithium-ion battery if it appears to be
WARNING – Charge and use the rechargeable Lithium-ion battery only in strict
leaking. Battery fluid is corrosive, and contact with it can result in personal injury and/or
property damage.
To prevent injury or damage:
– If the battery leaks, avoid contact with the battery fluid.
– If battery fluid gets into your eyes, immediately rinse your eyes with clean water and
seek medical attention. Do not rub your eyes!
– If battery fluid gets onto your skin or clothing, immediately use clean water to wash off
the battery fluid.
accordance with the instructions. Charging or using the battery in unauthorized
equipment can cause an explosion or fire, and can result in personal injury and/or
equipment damage.
To prevent injury or damage:
– Do not charge or use the battery if it appears to be damaged or leaking.
– Charge the Lithium-ion battery only in a Trimble product that is specified to charge it.
Be sure to follow all instructions that are provided with the battery charger.
– Discontinue charging a battery that gives off extreme heat or a burning odor.
– Use the battery only in Trimble equipment that is specified to use it.
– Use the battery only for its intended use and according to the instructions in the product
documentation.
Juno Series Handhelds User Guide
Inserting and removing the battery
To insert the battery into the handheld:
1.
On the back of the handheld, turn the back cover lock counter-clockwise to
unlock it. Pull the back cover toward you to remove it.
2.
To insert the battery, angle the left side
of the battery into the handheld first,
with the label facing upwards. Press
the battery flat until it clicks into place.
3.
To replace the back cover, insert the
bottom edge of the cover first, and then
push it flat until the top clicks into
place. Turn the lock clockwise to
secure the back cover.
To remove the battery:
4.
Remove the back cover of the handheld and then pull the right side of the
battery towards you.
CAUTION – The handheld is not sealed from water and dust when the battery is removed.
Trimble recommends only removing the battery for short periods of time and only
removing the battery indoors or from inside the protection of a vehicle.
Charging the battery
Charge the battery in the handheld (see page 18). To charge the battery, do one of the
following:
•
Connect the AC power adaptor to the Power socket on the handheld and then
connect the adaptor to mains power. An international adaptor kit is provided
with the handheld.
•
Connect the optional vehicle power adaptor to the Power socket on the
handheld and then connect the adaptor to the vehicle power source.
When the handheld is connected to a power source, the battery icon in the Home
screen changes to
. Fully charging the battery from empty takes approximately four
hours. You can use the handheld while it is charging.
The Power LED around the Power button on the handheld indicates the battery power
or charging status, as shown below:
Power source
LED state
Handheld/battery state
Battery power
Off
Off (in Suspend mode or turned off).
External power
Off
On and battery level is good.
Flashing red
On and battery is low (less than 10%).
Flashing green Charging.
Solid green
Charging is complete.
Juno Series Handhelds User Guide
19
Avoid keeping the battery at full charge at high temperatures. For more information,
see Storage, page 14.
Note – The life of the battery can be significantly shortened if power is constantly supplied
to the handheld. To avoid this issue, connect the handheld to an external power source
only when the battery requries charging. Once fully charged, disconnect the external power
source and allow the battery to discharge through normal use.
Checking the level of battery power
To check the level of battery power remaining at any time while the device is running,
tap the title bar of the Home screen and then tap
in the pull-down list.
The Power control appears, displaying the Battery tab.
When the handheld battery is recharging from an
external power source, the battery icon in the Home
screen changes to . You can still tap the icon to view
the level of battery power.
Low battery indicators
When the battery level reaches:
•
15%, the battery icon in the title bar of the Home screen changes to
•
10%, the Power LED on the handheld flashes red and the Main battery low
message appears on the handheld.
•
5%, the Main battery very low message appears on the handheld.
Trimble recommends that you recharge the battery when any of these indicators
appear.
Conserving power
Although the handheld battery can operate for a full day without recharging, Trimble
recommends that you do the following to reduce power consumption:
20
•
Set the handheld to automatically turn off when idle. For more information, see
Suspend mode, page 21.
•
Set the backlight to automatically turn off when the handheld is idle for a
specified time. For more information, see Backlight, page 38.
•
Reduce the brightness setting for the backlight. For more information, see
Backlight, page 38.
Juno Series Handhelds User Guide
•
Turn off the integrated Bluetooth or Wi-Fi radios or GSM/UMTS whenever you
are not using them. For more information, see Turning on and turning off the
integrated radios, page 49.
•
Disconnect from the integrated GNSS receiver when GNSS data is not required,
using the application’s Disconnect or Deactivate GNSS command. When you
disconnect from GNSS, the integrated GNSS receiver switches off and stops
drawing power.
Note – Do not disconnect from GNSS if you will be reconnecting within about five minutes.
A GNSS application can take up to 30 seconds to reactivate the integrated GNSS receiver,
so disconnecting to save power can cost time.
Turning on and turning off the handheld
If the screen on the handheld is blank, the handheld is in Suspend mode or has been
shut down. To turn on the handheld, press the Power key briefly (less than one
second).
To turn off the handheld or put the handheld into Suspend mode, press the Power key
briefly (less than one second). The handheld is placed in a very low power state, but
the Bluetooth and wireless GSM/UMTS radios may remain active (see Suspend mode,
page 21)
To completely shut down the handheld, press the Power button until the Power menu
appears and then tap Shutdown. All running applications are shut down, and the
handheld is completely turned off.
The options available from the Power menu are as follows:
Button
Used to...
Power Settings
quickly access the Power Settings menus.
Backlight Settings quickly access the Backlight Settings menu.
Shutdown
put the handheld into Shutdown mode. Applications are shut down and
the handheld is completely turned off.
Reset
restart the handheld. If the handheld stops responding to the stylus, or if
it does not respond when you press any of the keypad buttons, try a soft
reset. For more information, see Resetting the handheld, page 22.
access the Align Screen Sequence. You can also press the left application
key to access the Align Screen Sequence. If at any time the touch screen
does not respond correctly to stylus taps, start the screen alignment
sequence and follow the on-screen instructions.
Suspend mode
When you press the Power key to turn off the handheld, the handheld goes into
Suspend mode. This is a low-power mode that maintains the main memory contents
and keeps applications running but does not allow you to operate any of the
handheld’s functions. The handheld appears to be turned off. The integrated GNSS
receiver is turned off and any application using GNSS is disconnected.
Juno Series Handhelds User Guide
21
If a wireless radio is turned on, the Wi-Fi radio will be turned off, and the Bluetooth and
wireless GSM/UMTS radios will remain turned on. The handheld is capable of
receiving data via Bluetooth or the GSM/UMTS radio while it is in Suspend mode. The
handheld is able to automatically wake up to calendar alarms if it is in Suspend mode.
CAUTION – To save battery power, use the Wireless Manager to turn off the wireless
radios before you place the handheld into Suspend mode.
To turn on the handheld when it is in Suspend mode, press the Power key. The
handheld is immediately ready for operation. There may be a delay of up to 30 seconds
while the integrated GNSS receiver and the Wi-Fi radio automatically reactivate.
You can configure the handheld to automatically enter Suspend mode when it has
been idle for a specified time. By default, the handheld is set to enter Suspend mode if
it is not used for three minutes.
To change the time before the handheld enters Suspend
mode:
1.
Tap the title bar of the Home or the Start screen
and then tap . The Power control appears,
displaying the Battery tab.
2.
Tap the Advanced tab.
3.
From the On battery power option, select the Turn
off screen if device not used for check box and then
select the idle time from the drop-down list.
4.
Tap OK.
Resetting the handheld
If the screen on the handheld is blank, the handheld has turned off. Press the Power
button to turn on the handheld.
If the handheld stops responding to the stylus, or if it does not respond when you press
any of the keypad buttons, you may need to reset it. First, try a soft reset. If the
handheld does not respond, perform a hard reset.
You can also reset the handheld to its factory default settings.
Performing a soft reset
A soft reset is similar to restarting a computer. A soft reset saves data and closes all
open applications and then restarts the handheld. All data and settings are retained
after a soft reset.
To perform a soft reset, use the tip of the stylus to lightly press the Reset button.
Alternatively, press the Power button until the Power menu appears and then tap
Reset.
22
Juno Series Handhelds User Guide
Performing a hard reset
A hard reset retains settings and data that you have previously saved on the handheld.
However, any unsaved data may be lost.
Note – Perform a hard reset only if a soft reset does not resolve the problem.
To perform a hard reset, press and hold the Power button and use the tip of the stylus
to lightly press the Reset button.
Resetting to factory default settings
Reset the handheld to factory default settings to restore the handheld to its original
state, or only if a soft reset and then a hard reset does not resolve the problem.
CAUTION – Resetting the handheld to factory default settings erases all data, installed
CAUTION – If you have encrypted files on a memory card and you reset the handheld to
Tip – To quickly and easily restore data deleted by performing a factory reset, synchronize
the handheld with a computer before you reset the handheld to the factory default
settings. Once the handheld is reset, resynchronize the handheld with the computer.
applications, and settings stored in the handheld, except for any data or applications that
were pre-installed on the handheld or are stored on a memory card. It does not change
the language of the operating system used on the handheld.
factory default settings, the encryption key on the handheld is deleted. This means that
any files you have encrypted on a memory card are permanently locked and unreadable
by any device. For more information, see Encrypting files on memory cards, page 25.
To reset the handheld to the factory default settings:
1.
Press the Power button until the Power menu appears and then tap Shutdown .
2.
Press and hold the two soft keys on the handheld.
3.
While holding the soft keys, press and hold the Power key until the Hive Clean
prompt appears.
4.
Follow the on-screen instructions to continue the factory reset.
Juno Series Handhelds User Guide
23
Storing data
The handheld has two types of memory:
•
Storage memory is similar to the hard disk in a
computer, and is used for storing programs and
data.
•
Program memory is similar to the RAM in a
computer, and is used for running programs. You
cannot use it to save data.
To check the memory capacity on the handheld, tap
/ Settings / System / Memory. The Storage and Program
columns show the current memory available, and the
memory that is already in use.
Pre-installed documents and program files are not
affected by power loss or resetting. However, you can still lose data if you accidentally
delete or overwrite it.
CAUTION – The Windows Embedded Handheld 6.5 Professional operating system does
not include a Recycle Bin. When you delete files from the handheld, they are deleted
permanently.
Trimble recommends that you regularly copy important data to an office computer.
For more information, see Connecting to an office computer, page 44.
Memory cards
As an alternative to storage memory, you can save data to a memory card. Use either a
microSD or a microSDHC (high capacity) memory card to securely transfer data to and
from another device that supports microSD or microSDHC memory cards.
Note – The Juno series handheld does not support SDIO (SD input/output) cards.
CAUTION – The presence of any dust or moisture in the memory card slot may adversely
CAUTION – Static electricity can harm electronic components inside the handheld. To
prevent static damage, discharge static electricity from your body before you touch any of
the electronic components inside your device, such as a memory module. You can do so by
touching an unpainted metal surface.
affect the device and void your Trimble warranty. To prevent dust or moisture entering
the memory card slot:
– When inserting or removing a memory card, place the handheld on a dust-free indoor
surface.
To insert a microSD or microSDHC memory card:
24
1.
Turn off the handheld. See Turning on and turning off the handheld, page 21.
2.
Place the handheld face down on a dust-free indoor surface.
3.
Remove the battery cover door, and then remove the battery. See Inserting and
removing the battery, page 19.
Juno Series Handhelds User Guide
4.
Slide the card slot cover to the left and it will hinge open.
5.
Place the memory card in the slot with the swipes facing down.
6.
Lower the cover and slide it back to the right. The card is locked into place.
7.
Replace the battery and the battery cover door.
When you select the Save As option in an application, the memory card appears
in the list of available storage locations.
Note – Do not store required data or applications to a memory card if the card will be
removed. Data saved to a memory card is available only when the card is inserted in the
handheld.
To remove the memory card from the memory card slot:
1.
Turn off the handheld. See Turning on and turning off the handheld, page 21.
2.
Place the handheld face down on a dust-free indoor surface.
3.
Remove the battery cover door, and then remove the battery. See Inserting and
removing the battery, page 19.
4.
Slide the card slot cover to the left to open it, remove the card, then lower the
card slot cover and slide it to the right to lock it.
5.
Replace the battery and the battery cover door.
Encrypting files on memory cards
To prevent sensitive data on a memory card from being used if the card is lost or
stolen, files can be encrypted as they are placed on the card.
When encryption is enabled, an encryption key is stored on the handheld. Files are
encrypted as they are copied or written to the memory card. Files already saved on
memory cards before enabling encryption are not automatically encrypted.
Note – Because the encryption key is stored on the handheld, encrypted files are only
readable on the handheld on which they are initially encrypted. It is not possible to read
encrypted files on the storage card with any other device, including another Juno series
handheld or an office computer.
CAUTION – If you reset the handheld to the factory default settings, the encryption key is
deleted and the handheld is no longer able to read any encrypted files on a memory card.
This means that any files you have encrypted are permanently locked and unreadable by
any device. To avoid being unable to read previously encrypted files, Trimble recommends
that you use another device, such as an office computer, as the primary location for
storing important data and to control the encryption of important files.
To enable encryption of files as they are written to a memory card:
1.
Tap
/ Settings / System / Encryption.
2.
Select the Encrypt files when placed on a storage card check box.
Juno Series Handhelds User Guide
25
Note – Encrypted files appear as ordinary files on the handheld they were encrypted on. If
the memory card is inserted in another device, the files appear with a .menc file extension
and cannot be opened.
To disable encryption, clear the Encrypt files when placed on a storage card check box.
Note – Disabling encryption does not remove encryption from any existing files on the
memory card, but ensures that new files placed onto the memory card are not encrypted.
To encrypt files that are already stored on a memory card:
1.
Copy the files to the handheld’s internal memory or to an office computer.
2.
Ensure encryption is enabled on the handheld.
3.
Copy the files back to the memory card. The files are encrypted as they are
written to the memory card.
To remove encryption from files so they can be read by other devices:
1.
Insert the memory card in the handheld and then connect the handheld to an
office computer (see Connecting to an office computer, page 44).
2.
Copy the encrypted files from the memory card to the office computer.
3.
To use the decrypted files on the handheld, copy the files from the office
computer to the handheld’s main memory.
4.
To store the decrypted files on a memory card, ensure that encryption is not
enabled on the handheld and then copy the decrypted files from the office
computer to the memory card.
Installing and removing the SIM card
26
CAUTION – The SIM card and its contents can be easily damaged by scratches or bending.
Use caution when inserting or removing the card.
CAUTION – Static electricity can harm electronic components inside the handheld. To
CAUTION – The presence of any dust or moisture in the SIM card slot may adversely affect
the device and void your Trimble warranty. To prevent dust or moisture entering the SIM
card slot:
– When inserting or removing a SIM card, place the handheld on a dust-free indoor
surface.
prevent static damage, discharge static electricity from your body before you touch any of
the electronic components inside your device, such as a memory module. You can do so by
touching an unpainted metal surface.
Juno Series Handhelds User Guide
To insert or remove a SIM card:
1.
Turn off the handheld. See Turning on
and turning off the handheld, page 21.
2.
Place the handheld face down on a
dust-free indoor surface.
3.
Remove the battery cover door, and
then remove the battery. See Inserting
and removing the battery, page 19.
4.
Insert or remove the SIM card as shown,
with the gold contacts face down.
5.
Replace the battery and the battery cover door.
Juno Series Handhelds User Guide
27
Using the Windows Embedded Handheld operating system
The Juno series handhelds are powered by the Windows Embedded Handheld 6.5
Professional operating system. The main parts of the Home screen and the Start screen
are shown below.
Title bar
Contains status icons for important
system functions.
Home screen
Provides access to the key
functions on your
handheld. Scroll, and tap
any item to open it.
Tile bar
Contains touchable tiles
providing access to applications,
menus, and notifications.
Start button
Tap to open the Start
screen, where you can access
programs and system
controls.
Start screen
Tap any item on
the menu to
open it.
Lock device
Tap to lock the screen.
Once locked, you have
multiple points of
unlock entry depending
Connectivity icons
Tap either icon to access the
Wireless Manager.
Pull-down list
Tap anywhere on the title
bar to open the title bar
pull-down list, where you
can access connectivity
controls (the Wireless
Manager), battery
information, time and date
settings, and volume.
28
Juno Series Handhelds User Guide
Status indicators
Status indicators that appear in the title bar at the top of the screen are as follows:
Battery status indicators
Icon
Description
Battery has full charge (81-100%)
Battery has high charge (61-80%)
Battery has medium charge (41-60%)
Battery has low charge (16-40%)
Battery has very low charge (15% or less)
Battery charging/using external power
The battery status icon on the title bar of the Home screen or the Start screen shows
the status of the battery charge. Tap the title bar and then on the pull-down list tap the
icon to access the Power control dialog. See Checking the level of battery power,
page 20.
Network and modem status indicators
Icon
Connected to ActiveSync or Windows Mobile® Device Center (WMDC) on a computer
Connected to a Bluetooth-enabled phone
Disconnected from ActiveSync or WMDC
Disconnected from a Bluetooth-enabled phone
Wi-Fi radio is on
Wi-Fi is detected
Connected to a wireless network
Maximum GSM/UMTS signal strength No
GSM/UMTS signal
GSM/UMTS is turned off
No cellular service
Searching for GSM/UMTS service
Data is transferring using the GSM/UMTS
No SIM card
UMTS network is available
UMTS network is connecting
UMTS connection is active
3G+ network is available
Analog network is available
EDGE network is available
EDGE network is connecting
EDGE connection is active
GPRS network is available
Juno Series Handhelds User Guide
29
Icon
GPRS network is connecting
GPSR connection is active
HSDPA network is available
HSDPA network is connecting
HSDPA connection is active
The network and modem status icons on the title bar of the Home screen or the Start
screen show the status of each radio. Tap the title bar and then on the pull-down list
tap the
or
icon. In the Connectivity or Phone dialog, select Wireless Manager
and turn on or turn off the radio.
Speaker status indicators
Icon
Description
Speaker is on
Speaker is off
The speaker status icon on the title bar of the Home screen or the Start screen shows
the status of the speaker. Tap the title bar and then on the pull-down list tap the
icon to adjust the volume and to turn the speaker on or off.
Pre-installed programs
Programs that are pre-installed on the Juno series handheld are as follows:
Program
30
Function
ActiveSync
Synchronize information between the handheld and a computer.
Adobe Reader LE
Read PDF documents.
Alarms
Set alarms.
Calculator
Perform basic arithmetic functions.
Calendar
Keep track of appointments and arrange meetings.
Contacts
Keep track of your friends and colleagues.
File Explorer
View and manage files.
Internet Explorer
Browse the World Wide Web.
Messenger
Send instant messages using Windows Live™ Messenger.
Notes
Create handwritten, typed, or recorded notes.
Pictures and Videos
Take, view, and edit pictures, or record and launch video clips.
Search Device
Search for a file or item stored on the handheld.
Tasks
Keep track of your tasks.
Windows Live
Access Windows Live services, including email, instant messenger
and Internet search.
Windows Media
Play Windows Media® or MP3 audio and video files.
Juno Series Handhelds User Guide
Program
Function
E-mail
Write, send, and receive email messages.
On the TNJ32 handheld, you can also access text messaging
functions.
Office Mobile 2010
(TNJ32 handheld only)
Provides access to these Office Mobile applications: Excel® Mobile
2010, PowerPoint® Mobile 2010, OneNote® Mobile 2010,
SharePoint WorkSpace Mobile 2010, and Word Mobile.
Text
(TNJ32 handheld only)
Send, receive, and organize text messages.
Phone
(TNJ32 handheld only)
Access the phone functions.
Flashlight
(TNJ32 handheld only)
Use the camera LED flash as a flashlight.
Interacting with the handheld
To interact with the handheld, use the stylus or your finger to tap items on the touch
screen, or to scroll up or down.
Action
Definition
Tap
Touch the screen once to open items and select options.
Tap and hold
Tap and hold the stylus on an item to see a list of actions available for that
item. On the pop-up menu that appears, tap the action you want to perform.
Drag
Hold the stylus on the screen and drag across the screen to select text and
images. Drag in a list to select multiple items.
Flick
Flick the stylus or your finger over the screen to scroll a page or a list up or
down.
If at any time the touch screen does not respond correctly to stylus taps or your finger,
realign it. For more information, see Screen, page 37.
Entering information
Depending on the program you are using, you can enter information in several ways, as
described below:
Input method
Description
Synchronizing
Use Microsoft connection management software to exchange
information between the handheld and an office computer.
For more information, see Connecting to an office computer,
page 44.
Typing
Use the keyboard input panel to enter typed text by tapping keys on
the on-screen keyboard.
Writing
Use the stylus like a pen to write directly on the screen.
Recording
Create a stand-alone recording or embed a recording into a note.
Juno Series Handhelds User Guide
31
Using the on-screen keyboard
Textbox
The keyboard button automatically
appears in the tile bar of any
application.
To display the keyboard, tap the
keyboard button, or tap a text box in
the application.
To enter characters, use your finger or
the stylus to tap the keys on the
keyboard. When you finish entering
text in a field, tap
to accept the
text you have entered and then move to
the next field.
Keyboard
Keyboard button
To enter special characters, tap
to
display keyboards containing numbers and symbols. To switch back to the main
keyboard, tap
again.
To hide the keyboard, tap the keyboard icon again.
Tip – To make the keys larger, tap
/ Settings / Personal / Input. In the Input method list,
select Keyboard and then tap Large Keys.
Drawing and writing directly on screen
In some applications, for example Notes, you can draw
(or write directly) on the screen using the stylus.
32
1.
Tap
and then tap the Notes icon
2.
Tap the Menu
3.
Select Draw.
4.
Use the stylus to write or draw on the screen.
Juno Series Handhelds User Guide
icon.
Making a recording
For handheld configurations equipped with an integrated microphone, you can create
a stand-alone voice note or you can add a recording to a note. Then you can work with
voice notes in the same way that you work with notes.
To make a recording:
1.
Tap
2.
Tap the Menu
3.
Do one of the following:
4.
and then tap the Notes icon.
icon.
–
To create a stand-alone recording, in the
screen displaying the list of notes, tap the
Record button
to begin recording.
–
To add a recording to a note, create or open
a note and then tap the Record button
to begin recording.
When you finish recording, tap the Stop button
If you are creating a stand-alone recording, an
icon appears in the note list.
If you are recording in an open note, an icon
appears in the note. Tap OK to return to the note
list.
To play a recording, tap the recording in the note list or
open the note and then tap the icon in the note.
Personalizing the handheld
Use the controls in the Settings area to customize the handheld. The following
examples describe the available controls.
Buttons
Use the Buttons control under Personal settings to assign the action you want to be
performed when you press the left or right application key.
By default, these keys perform the same action as the left and right tiles in the tile bar.
Alternatively, program these keys to perform a selected action.
Application buttons can be programmed to perform one of the following types of
actions:
•
Run a selected application, for example Messaging or Calendar.
•
Act as a software button, for example an OK/Close button or a scroll button.
Juno Series Handhelds User Guide
33
•
View a selected screen, or part of a screen, for example return to the Home
screen or launch the Context menu or Input panel.
To open the Buttons control:
•
Tap
/ Settings / Personal / Buttons.
To specify an action for the button:
1.
Tap the Program Buttons tab.
2.
Tap a button in the list to select it.
3.
From the Assign a program drop-down list, select
the action you want to occur when you press the
button or tap the softkey.
4.
Tap OK.
Home
Use the Home settings to change the display theme that controls the appearance of the
Home screen, and to customize how items appear on the Home screen.
Appearance
You can use a theme to customize the background picture on the Home screen, the
color of the title and tile bars, menus, and messages.
To change the display theme:
1.
Tap
2.
Tap the Appearance tab.
3.
Do one of the following:
4.
34
/ Settings / Home.
–
To use a predefined theme, select it from the
list.
–
To select the picture that you want to display
in the Home screen background, select the Use
this picture as the background check box. Then
tap Browse to search for a file on the
handheld.
Tap OK.
Juno Series Handhelds User Guide
Items
You can choose between:
•
the Windows default Home screen view, which allows you to flick through the
list of entries, giving access to functions such as email, text messaging, current
time, and Internet Explorer.
•
customising which items appear on the Home screen and the order in which
they appear.
To use the default Home screen view:
1.
Tap
/ Settings / Home.
2.
Tap the Items tab.
3.
Select the Windows Default check box.
4.
Tap OK.
To customise the items which appear on the Home
screen:
1.
Tap
/ Settings / Home.
2.
Tap the Items tab.
3.
Select or clear the check boxes to show or hide the
Home screen items.
4.
Use the Move Up and Move Down buttons to change where the selected item
appears on the Home screen.
5.
Tap OK.
Set the time and date
1.
On the Home screen, tap the clock item, or tap the
title bar and then on the pull-down list, tap the
clock icon . The Clock & Alarms screen appears.
2.
Tap the Time tab.
3.
In the Time Zone field, select the required time
zone from the drop-down list.
4.
In the Date field, tap the down arrow and then
select the correct date.
Tip – On the calendar which appears, tap on the month or
year to select the required value.
5.
In the Time field, tap in turn the hour, minute, and
second values and then tap the up or down arrows
to set the correct time.
Juno Series Handhelds User Guide
35
Device lock
Tap the Device Lock icon on the Start screen to lock the screen and keypad while the
handheld remains turned on.
Once the handheld is locked, the screen and most of the keys do not respond until the
handheld is unlocked. The exception is the Power key, which always respond when
pressed.
Communication with external devices such as a GNSS receiver, or external sensors
used by GNSS field software, is not interrupted by locking the handheld. This means
that you can keep using the GNSS field software when the handheld is locked. For
example, you could lock the device so that you can safely transport it between features,
while keeping the software connected to the GNSS receiver so that you can continue
recording GNSS positions.
The lock screen provides multiple unlock sliders for different applications, when there
are new notifications. For example, if a new email has arrived, an email unlock slider
takes you straight to the email.
To unlock the device, slide the Unlock icon for the required
application to take you straight to that application.
You can help to keep your data secure by requiring a password each time the handheld
is turned on. Tap
/ Settings / Lock to set a password or to change password settings.
Power
To open the Power control, do one of the following:
•
Tap the title bar of the Home screen or the Start screen, and then tap
•
Tap
/ Settings / Power.
Tap the Battery tab to check the battery level (see Checking the level of battery power,
page 20).
Tap the Advanced tab to set the time before the handheld turns off when idle (see
Suspend mode, page 21).
Sounds and notifications
Use the Sounds & Notifications control to set preferences for the speaker volume and
system sounds. To open the Sounds & Notifications control:
•
36
Tap
/ Settings / Sounds & Notifications.
Juno Series Handhelds User Guide
To turn on or turn off sounds:
1.
Tap the Sounds tab.
2.
Select or clear the check boxes to enable or disable
categories of sounds.
3.
If you select the Screen taps or Hardware buttons
check boxes, select the Soft or Loud option to
control the volume of the sounds.
4.
Tap OK.
You can use predefined schemes to customize sounds, or
you can create your own sound schemes.
To specify a sound scheme:
1.
Tap the Notifications tab.
2.
From the Event drop-down list, select an event.
3.
Select the type of notification you want to receive
for that event.
4.
Tap OK.
Screen
Use the Screen control to align the touch screen or to change the appearance of text on
the screen. To open the Screen control:
•
Tap
/ Settings / System / Screen.
To change the screen settings:
1.
Tap the General tab.
2.
To change the orientation of the screen, select an
option in the Orientation group.
3.
To start the alignment sequence for the touch
screen, tap
Align Screen .
4.
Tap OK.
Note – To align the screen at any time, press and hold the
Power button for 1 second until the Power menu appears
and then tap .
Using ClearType font smoothing can make text easier to
read on the screen.
Note – ClearType is already on by default on the Juno series handheld.
Juno Series Handhelds User Guide
37
To enable ClearType:
1.
Tap the ClearType tab and then select the Enable ClearType check box.
2.
Tap OK.
To change the size of text on screen:
1.
Tap the Text Size tab.
2.
Tap and drag the slider control to the left to make
text smaller, or to the right to make text larger.
The example text below the slider shows how the
text will appear on screen.
3.
Tap OK.
Backlight
The backlight makes the screen easier to read in low light, but uses extra power. Use
the Backlight control to configure power-saving settings for the backlight. To open the
Backlight control:
•
Tap
/ Settings / System / Backlight.
To set the backlight to automatically turn off:
1.
38
To automatically turn off the backlight when the
handheld is idle and is using battery power, tap the
Battery Power tab. Select the Turn off backlight
check box and then select a time from the
drop-down list.
Juno Series Handhelds User Guide
2.
To automatically turn off the backlight when the
handheld is idle and is using external power, tap
the External Power tab. Select the Turn off backlight
check box and then select a time from the
drop-down list.
3.
Tap OK.
To change the brightness:
1.
Tap the Brightness tab.
2.
Tap and drag the Brightness Level slider control to
the left to make the backlight darker, or to the right
to make the backlight brighter.
3.
Tap OK.
dwalton
ŧŝŕœŔŔŔŕŕŕŔŕœřŔŖŎŔŖŊœœŊŕœŔŔŒŔŕŒŕŕŃ঱ଏŃ
œŚŝœřŝŔŖ
-------------------------------------------NOTE this snap is wrong - the correct
snap will show Brightness (as in the
text) not Configure as in the graphic. I
don't have the correct snap yet...
Messaging
Use Messaging to send and receive email messages using the Juno series handheld.
Messaging is the equivalent of your email Inbox.
To use email, you can do one of the following:
•
Synchronize email messages with Microsoft Exchange or Microsoft Outlook® on
an office computer.
•
Send and receive email messages by connecting directly to an email server
through an ISP or a network.
Synchronizing email messages
You can synchronize email messages on the handheld and the computer.
CAUTION – When you delete a message on the handheld, it is deleted from the office
computer the next time you synchronize the devices.
To synchronize email, you must enable Inbox synchronization in the Microsoft
ActiveSync technology ( for Windows XP) or the WMDC ( for Windows Vista or
Windows 7). For more information, refer to the ActiveSync Help or the WMDC Help on
the office computer.
Juno Series Handhelds User Guide
39
During synchronization:
•
Messages are copied from the mail folders of Exchange or Outlook on the office
computer to the Messaging folder on the handheld. By default, you will receive
messages from the past 3 days only, the first 100 lines of each message, and file
attachments of less than 100 KB in size.
•
Email messages in the Outbox folder on the handheld are transferred to
Exchange or Outlook, and then sent from those programs.
•
Email messages in subfolders in other email folders in Outlook are synchronized
only if they were selected for synchronization (using ActiveSync technology or
the WMDC).
To send and receive email for a synchronized Exchange or Outlook account, connect
the handheld to the office computer. Synchronization automatically begins, and the
handheld sends and receives email.
Connecting directly to an email server
In addition to synchronizing email messages with an office computer, you can send
and receive email messages by connecting to an email server.
Before you can send and receive email, you must create an email account in the
Messaging software.
Note – You must set up an Internet connection on the handheld before you can set up and
use your email account. For more information, see Connecting to a Wi-Fi access point,
page 54, Connecting to a Bluetooth-enabled device, page 55, or Connecting to a
Bluetooth-enabled phone for Internet access, page 61.
If you need to connect to different mailboxes, set up and name a different service for
each connection.
Note – The Messaging software supports only the POP3 and IMAP4 protocols for incoming
mail, and SMTP for outgoing mail.
To set up a mail service:
40
1.
Tap
/ E-mail.
2.
Tap Setup E-mail.
3.
Enter the email address for your account.
4.
Enter a password. Select Save password if you want
the device to remember your password.
5.
Tap Next.
6.
To automatically get connection settings for your
email account from the Internet, select the check
box.
7.
Tap Next.
Juno Series Handhelds User Guide

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c321 44.398116, Tue Aug 04 2009 14:24:39
Modify Date                     : 2012:01:20 15:23:15+08:00
Create Date                     : 2012:01:20 15:23:15+08:00
Metadata Date                   : 2012:01:20 14:41:24+08:00
Creator Tool                    : Acrobat PDFMaker 9.1 Word
Format                          : application/pdf
Title                           : Trimble Field Inspector Software User Guide
Creator                         : Technical Publications, Trimble Navigation Limited
Document ID                     : uuid:7c3c1057-a0d2-4909-99f9-84ea4adbb8f6
Instance ID                     : uuid:2ab5c986-b7c0-445e-b8cc-9a8d412d7fb8
Producer                        : Acrobat Distiller 8.3.1 (Windows)
Page Count                      : 40
Author                          : Technical Publications, Trimble Navigation Limited

EXIF Metadata provided by EXIF.tools