Trimble ELIZABETH35 Hi Power Low Band Transmitter User Manual 568455
Trimble Navigation Ltd Hi Power Low Band Transmitter 568455
Trimble >
Contents
- 1. User Manual Low band RF Power Amp
- 2. User Manual Lowband Transmitter
User Manual Lowband Transmitter
![Lowband Transmitter Telecom Rack Network Comms Chassis Ethernet Router/Hub (may be part of a modem)Power Amp Chassis(es) RF Amp Power Supply Controller Exciter Chassis Modulator Controller PPS 10 MHz Power Supply Chassis(es) Surge Suppressor Power Supply & ChargerBattery 110 VAC 110 VAC 10-16 VDC Various Any two of… ISDN ModemDSL ModemCable ModemPOTS ModemCDPD PhoneCell Phone with ModemPoint-to-Point Radio (e.g., 2.4 GHz)Serial Port to External DeviceEthernet to External DeviceIndustrial PC Chassis Thunderbolt Serial Port Ethernet Computer Stuff](https://usermanual.wiki/Trimble/ELIZABETH35.User-Manual-Lowband-Transmitter/User-Guide-568455-Page-1.png)
![Notes: A single 110 VAC surge suppressor protects the whole rack. The RF Amp has its own 110 VAC power supply. Everything else runs off a single 10-16 VDC, battery-backed power supply/charger. The controller in the power amp chassis runs off the 10-16 VDC (not the 110 VAC). This power supply architecture avoids the need for a battery-backed AC inverter. Both antennas need lightening/EMP protection. The various comms connections need appropriate protection. Connections within chassis are not shown. The power supply/charger may have status that needs to be connected to the PC.](https://usermanual.wiki/Trimble/ELIZABETH35.User-Manual-Lowband-Transmitter/User-Guide-568455-Page-2.png)