Trinus Systems CCR24R Wireless Transmitter System User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1085561
Application ID	OT09Y68Dzj67p/hYgH9OPA==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	13.77kB (172071 bits)
Date Submitted	2009-03-25 00:00:00
Date Available	2009-03-25 00:00:00
Creation Date	2009-03-24 12:57:46
Producing Software	Acrobat Distiller 8.1.0 (Windows)
Document Lastmod	2009-03-24 12:57:46
Document Title	Microsoft PowerPoint - User manual _Jenny 수정
Document Creator	PScript5.dll Version 5.2.2
Document Author:	jenny_jo

• WARRANTY SERVICE CARD
CCR24T
CCR24R
WARRANTY CARD
PRODUCT NAME
Wireless Transceiver System
PERIOD
MODEL NAME
CCR24GEN
PURCHASE DATE
. 200_
WARRANTY PERIOD
. 200_
1 YEAR
From the
date of
purchase.
CUSTOMER’S ADDRESS :
NAME :
TEL :
AGENT’S ADDRESS :
WIRELESS TRANSMITTER SYSTEM
User’s Guide
NAME :
TEL :
* Be sure to fill in blanks when the unit is sold
We grant 1 year warranty on the product commencing on the
date of purchase. Within the warranty period, the manufacturer
will correct, free of charge, any defect in the unit resulting from
faults in materials or workmanship, either by repairing or
replacing the entire unit as manufacturer may choose.
This warranty does not cover: damages due to improper use,
normal wear and tear, or defects that have a negligible effect on
the value or operation of the unit. The warranty is void if repairs
are undertaken by unauthorized persons and if original Trinus
parts are not used.
To obtain service within the warranty period, bring in or ship the
complete unit with your purchase invoice to a Trinus Customer
Service Center.
● Read this user’s guide carefully for safe operation and proper
use of the product
WARNING
MEMO
* Please turn off the power before connecting or
disconnecting any cables.
- Do not immerse in water or keep in humid areas
- Do not place near TV, speakers, or other electronic devices
- Before installation, check power supply and voltage to avoid
hazards
- Do not apply force or shock to the unit
- Do not disassemble the unit
TECHNICAL SPECIFICATIONS
Operating Voltage
TX: 3.7VDC
RX: 12VDC
Frequency Range
2401.056 MHz ~ 2478.816 MHz
Operating Range
Up to 1500 feet at the open field
* Note : Operating Range can be different
according to the environment
Operating Temperature
10 ~ 110 °F
LED Indicators
TX: low battery warning, Out of Range,
Talk On, Mute
RX: Charging indicator, Talk On
Jacks
8 pin RJ-45 for power, audio out, and
trigger out
Battery
Capacity: Lithium-Li-Polymer 3.7V
DC/1400mA
Charging time: 3 hours
Talk Time: Max. 13 Hours
OPERATION (TX)
OPERATION (Cradle)
REC,TALK On/Off
Internal MIC
BEEP
Power On/Off
MODE
Antenna connection (external Antenna)
MUTE ON/FF
LED : Recording ON/OFF, ID Matching
Microphone Jack
LED : Battery Charging Status
Charging PIN
RJ-45 Jack
1. REC On/Off button
* LED : REC & Talk On/Off – Green LED On/Off
Mute On – Green LED blinking
Low Battery – Red LED blinking
Out of Range – Red LED steady On
2. Beep: Beep Tone
3. Mode: Beep > Vibration > Beep + Vibration > NO action
Every time you push the button, mode will be automatically
changed in order. (This Function operate only at St-by mode)
4. Mute On/Off:
When user want to mute the voice in the Communication.
Press the button to mute and press the button again to not-mute.
5. Microphone Jack (* Lapel MIC is optional)
6. Internal MIC
7. Power On/Off: Turn on/off the power of unit. When this is turned
off, Unit will not work.
1. Antenna Connection
2. LED : REC & TALK On/Off – Green LED On/Off
ID Matching On – Green LED blinking
3. LED : Battery Charging – Red LED on
Battery is fully charged – Green LED on
4. Charging Pin
5. RJ45 Jack for the cable
PIN DESCRIPTION
FUNCTIONS
RJ-45 Connector Pin Description
- 95 Channel Possible in the 2400~2483MHz Bandwidth
- Transmission Range up to 1500 feet in open field
- Audible and LED indicator out of range warning.
Pin# 1: VCC, DC power (10V ~ 16VDC)
- Better voice quality.
Pin# 2: GND
- 40 bits security code combination.
- Charger Status Indicator
Pin# 3: Audio Signal
- Mute function On/Off Key (Transmitter)
Pin# 4: Audio Signal GND
- Auto link (When the system On/Off is On mode)
- Recorder On/Off Switch
Pin# 5: GND
- Transmitter Power On/Off switch
Pin# 6: 2.8V out when the unit is on. Short this pin
- Low Battery Indicator (Transmitter)
- Link LED indicator (Receiver & Transmitter)
to GND to remotely turn on TX.
- Beep Mode and Vibration Mode Selectable for user’s convenience
Normal “H” 5.0V
Recording starts
0V
TROUBLESHOOTING
Pin# 7 : 0V when TX is ON, 5V when TX is OFF.
Use this pin for recording trigger (Recording Trigger)
Normal “H” 5.0V
0V
Pin# 8 : FULL UP 5V 470 OHM
TX unit is on
Problems
No reception
Poor reception,
static, noise
Unit does not
respond
Check Points
- Check the battery status
- Check the connection and cables
- Check the communication range
- Change the location of RX Set
- Check the communication range
- Check to see if unit is placed near TV,
speakers, or other electronic devices
- Check the battery status
- Check the power switch on the bottom of
the unit
- Check the connection and cables
Safety Approval
- Reorient or relocate the receiving antenna.
- FCC ID: ROYCCR24R / ROYCCR24T
This device complies with Part15 of the FCC Rules.
Operation is subject to the following two conditions :
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for
help.
FCC RF Radiation Exposure Statement
CAUTION : Changes or modifications not expressly approved by the
party responsible for compliance could void the user s authority to
operate this device.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential
installation. This equipment generates, uses and can radiate radio
frequency energy, and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
This equipment complies with FCC RF radiation exposure limits
set forth for an uncontrolled environment. This equipment
should be installed and operated with a minimum distance of 20
centimeters between the radiator and your body.
This transmitter must not be co-located or operated in
conjunction with any other antenna or transmitter.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Format                          : application/pdf
Creator                         : jenny_jo
Title                           : Microsoft PowerPoint - User manual _Jenny 수정
Create Date                     : 2009:03:24 12:57:46+09:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2009:03:24 12:57:46+09:00
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Document ID                     : uuid:4e428c9f-1d6f-436f-b10a-e0c50fd43819
Instance ID                     : uuid:dcf3d3d4-f9e3-48ce-b1f2-d7e841222c8c
Page Count                      : 5
Author                          : jenny_jo

EXIF Metadata provided by EXIF.tools