Truly Instrument DB63 BLOOD PRESSURE MONITOR User Manual 61M 1

Truly Instrument Ltd. BLOOD PRESSURE MONITOR 61M 1

2ABG7-DB63_user manaul_Rev1

6. To disable Alarm, Press the ” MEMO ” or ”PAGE ” button to select “OFF” and press the ” AVG” button to confirm.7. To set 1st Alarm, Press the ” MEMO” or ”PAGE ” button to select “ON”. Press the “ AVG” button to confirm.8. When Hour digit flashes, press the “ MEMO” or “ PAGE ” button to select Hour. Press the “ AVG”button to confirm.9. When Minute digit flashes, press the “ MEMO” or “PAGE ” button to select Minute. Press the “ AVG” button to confirm.10. Follow the same steps to set the 2nd, 3rd, and 4th Alarm54MonitorBlood Pressure MonitorDB63Instruction ManualOVERVIEW6 7 8DisplayPackage ContentsMain UnitArm Cuff 4 x AAAlkaline Batteries2.1 Battery Installation1. Pull and lift on the lock to remove the battery cover.2. Insert 4 AA batteries with the polarities in correct direction.3. Replace the battery cover. Press it lightly until the lock securely clicks into place.2.2 Connect AC Adaptor (Optional)If you have the AC 6V adaptor, plug it into the AC adaptor jack at the top of the device. Remove batteries when using the AC adaptor.2.3 Date & Time SettingNote: - Set the correct date and time before taking a measurement. - Date and time should be reset after replacing new batteries.Note: Replace batteries when the battery indicator “ ” shows low voltage.1. Press and hold the ” AVG” button for a few seconds until the Year display flashes.2. Press the“ MEMO” or ”PAGE ” button to select the current year.3. Press the “ AVG” button to confirm Year Setting.4. Follow the same steps to set the Month, Date, Hour and Minute.5. You can choose Clock Function “ON” or “OFF” while the monitor is not in use. Press “ MEMO” or ”PAGE ” button to select. Press the ” AVG ” button to confirm.Noted: If you select Clock Function “ON”, you will continue at the Alarm Setting section. Otherwise, setting will end.2.4 Alarm SettingNote: - You will not be able to set alarm clock if Clock Function is set to “OFF”. - You can set a maximum of 4 alarms.Note: - Press the “ ” button anytime during clock setting/alarm setting to start over if an error occurs. - Each alarm clock lasts 45 seconds, or you can turn it off by pressing the “ ” button.PREPARATION164.3 Delete Past ReadingsUser can delete all the past readings stored in each User Page.1. Press the “PAGE ” button to select the User Page you want to delete.2. Press and hold the “ MEMO” & “PAGE ” button simultaneously for 5 seconds. Symbol of “ALL EE” will be displayed and all past readings stored in that User Page will be deleted. Symbol on Display Average Values of1 h One Hour1 d One Day7 d One Week30 d One Month ALL All Readings10Note: - Avoid smoking, eating or exercising for 30 minutes before taking measurement. - Do not move or talk during measurement. - Measurement can be taken on either arm.1. Place your elbow on a table and palm facing upward, and wrap the arm cuff around the upper left arm. 2. Pull on the end of the cuff until it wraps securely around your upper arm. Do not over tighten the cuff. Allow 1-2 cm or ½ inch between the bottom of the cuff and your elbow joint.3. Make sure the cuff is at the same level as your heart.3.1 Sitting Correctly1. Relax2. Sit upright in a chair with your both feet on the floor.3. Remove tight fitting clothing from you upper arm and thick clothing. Do not roll up your sleeve if it is too tight.4. Place your arm on a table so that the cuff will be at the same level as your heart.3.2 Applying the Arm CuffTAKING MEASUREMENTSIZE：84*145MM 正面SIZE：84*145MM 反面18 Keep away the unit from direct sunlight, extreme temperatures, humidity or moisture.Use a dry, soft cloth to clean the unit, or if desired, use a cloth lightly dampened with water.Do not use alcohol, benzene, thinner or other volatile liquids to clean the unit.Do not wash or expose the arm cuff to liquid.Remove batteries from the unit when it will not be used for more than 3 months.STORAGE & MAINTENANCEModel No.Measurement MethodMeasurement RangeAccuracyInflationPressure DetectionPower SupplyAuto Power OffStorage EnvironmentOperation EnvironmentExternal DimensionsNet WeightCuff DimensionsPackage ContentNote: Subject to modification without prior notice.DB63OscillometricPressure: 20 – 280 mmHgPulse Rate: 40 – 195 beats/minPressure: +/- 3 mmHgPulse Rate: +/- 5%Pump drivenSemi-conductor4 x AA batteries or AC/DC adaptor3 minutes after last operation-20°C to 60°C, 10% to 95% RH10°C to 40°C, 15% to 90% RH6.1” (L) x 5.1” (W) x 4.3” (H) or15.5 (L) x 13 (W) x 11 (H) cm410g (batteries excluded)For arm circumference of 22-34 cm (Special size to be ordered separately)Cuff, Instruction Manual, Battery Set, Warranty Card19SPECIFICATIONSNote: If your problem cannot be solved by the above, consult your store of purchase. Do not disassemble the unit.17Check if the cuff is properly connected.Replace the air tube if it is broken.Fail to inflate“Err P” displayed“Err 1” displayed“Err 2” displayed“Err 3” displayed Incorrect results Measure again.Remove interfering source e.g. mobile phones, magnets.Do not move during measurementReturn for servicing.Deflate too rapidlyMovement during measurementSignal interferenceProblem Cause SolutionNo display when you press the Power/Start buttonHave the batteries run out?Are the battery polarities wrong?Replace new batteries.Re-align batteries in correct polarities.TROUBLESHOOTINGManufactured in accordance with International StandardsManufacturer： Truly Instrument Ltd. 2/F, Chung Shun Knitting Centre, 1-3 Wing Yip St., Kwai Chung, N.T., Hong KongTEL： （852） 24879803FAX： （852） 214657564.2 View Average Readings1. Press the “ AVG” button to enter Average function.2. If the User Page is not what you want to view, press the “PAGE ” button to select.3. Press the “ AVG” button to view different Average Values. 5 different Average Values are available:12 13 14 154.1 View Past Readings1. Press the “ MEMO” button to enter memory function.2. If the User Page is not what you want to view, press the “PAGE ” button to select.3. Press the “ MEMO” button to display the next sets of values. Past readings are displayed from the most recent to the oldest.4. This can stored up to 99 sets of past readings for each user (4 x 99).After measurement, the last set of measured values will be saved automatically after measurement when the unit is turned off by pressing “ ” button or by automatic poweroff after 3 minutes.This unit features a 6-color LED light indicator to display blood pressure level in accordance with the WHO (World Health Organization) classification.3.6 WHO Light IndicatormmHgmmHg120 130 140 150 160 170 18011010510095908580Grade 3 hypertension(severe) (Red)Grade 2 hypertension(moderate) (Yellow)Grade 1 hypertension(mild) (Purple)High- normal(Green)Normal(Sky Blue)Optimal(Blue)Systolic PressureDiastolic PressureWHO Light IndicatorIrregular HeartbeatThis unit has a unique feature that alerts user of irregular heartbeat detection during measurement.Note：An irregular heartbeat is defined as a heartbeat rhythm that has a variation of more than25% from the average rhythm detected during measurement.If such irregular rhythm occurs twice or more during the same measurement, the display screen will show the pulse value and “IH” symbol alternately.Example: (90 / IH)Note：Please consult your doctor if irregular heartbeat occurs often.Regular but Below Normal HeartbeatIf the monitor detects a pulse rate below 60 beats per minute during measurement, the monitor will display the pulse value and “LO” symbol alternately.Example: (58 / LO)Regular but Above Normal HeartbeatIf the monitor detects a pulse rate above 100 beats per minute during measurement, the monitor will display the pulse value and “HI” symbol alternately.Example: (102 / HI)WHO Classification ColorOptimal --------------------BlueNormal ---------------------Sky BlueHigh-normal --------------GreenMild hypertension -------PurpleModerate hypertension ---YellowSevere hypertension ----RedExample: If your measurement reading is 122/75, the LED light will display the color in blue.MEMORY FUNCTIONSCuff OutletWHO LightIndictorMemory Recall(Up)Average Values (Set) Page Select(Down)Power(Start)KilopascalUser 1-4MemoryDate & YearSystolicDiastolicPulseLow BatteryIndicatorMemory No.(1-99 readings)Pulse SymbolMemory Average113.3 User SettingThis unit allows a maximum of 4 users to store measurement records in different User Pages.3.4 Taking Measurement3.5 Heartbeat ReadingsBesides Systolic and Diastolic values, Pulse will also be displayed after a measurementPress “PAGE ” button to switch between User Page 1, 2, 3 and 4.1. Press the “ ” button. The cuff will automatically inflate and the measurement will start.2. When the measurement is complete, the cuff will automatically deflate and your systolic and diastolic pressure values and pulse rate will display. 3. Remove the arm cuff and take note of your measurement results.Note：You can press the “ ” button to stop measurement at any time.Pulse0123EC-Representative：Wellkang Ltd t/a Wellkang Tech Consulting Suite B, 29 Harley Street, LONDON W1G 9QR, United KingdomRev.02013/11/1132Babies, young children or individuals who cannot express their consent are not suitable to take blood pressure measurement.Individuals with serious arteriosclerosis are not suitable to take blood pressure measurement.Blood pressure readings may change in case of pregnancy. Pregnant women can consult their doctor before taking measurement.Self-measurement is not medical treatment. If there are unusual values, please consult your doctor.Handling batteries properly: - As soon as old batteries run out, replace with new batteries. - Do not use old and new batteries together. - Align the polarities of batteries correctly. - When the unit will not be used for more than 3 months, remove the batteries. Otherwise, batteries may leak and cause damage to the unit.Handling AC adapter properly: - Never unplug the power cord with wet hands. - Use only the original AC adapter designed for this unit.SAFETY PRECAUTIONS QUICK START GUIDEAvoid smoking, eating or exercising for 30 minutes before taking measurement 2. Remove tight fitting clothing from you upper arm and thick clothing.1. Sit upright in a chair with your both feet on the floor. 3. Pull on the end of the cuff until it wraps securely around your upper arm. Place your arm on a table so that the cuff will be at the same level as your heart.7. When the measurement is complete, the cuff will automatically deflate and your systolic and diastolic pressure values and pulse rate will display on Blood Pressure monitor & save on iOS application screen.8. After that check the measurement history on History screen or chart screen by iOS application. 4. Connect iOS device via Bluetooth (Turn Bluetooth "On" under the "Settings" menu on the iOS device).5. Open "TRULY" application, and then press the Blood Pressure icon on Measure screen.6. Press the “ ” button. The cuff will automatically inflate and the measurement will start.Setup ProceduresInstallationPrior to first use, Download and install "TRULY" application to your iOS device.(Bluetooth 4.0 capabilities, e.g. iPhone 4S, iPhone 5, NewiPad and iPadMini).92.5 Language SettingWhen a measurement is completed, DB62V will read aloud the systolic value, diastolic value and pulse automatically. The default language is English.1. Press and hold the “ MEMO” button until the screen displays [LLLx] (x = 0 ~ 7), then release the button. 2. Press the “ MEMO” button to select language. Number 0 ~ 7 represents the following languages: 0 Mute 1 English 2 German 3 Russian 4 Polish 5 Czech 6 Turkish 7 Chinese3. Press the “ ” button to confirm the selection and begin measurement.Features Bluetooth 4.0 compatible One Touch Operation Irregular Heartbeat Detector Blood Pressure Mode and Clock Mode 4 User / 396 Total Memory 4 Alarm Clock Settings 5 Mode Averaging Function – Hour, Day, Week, Month, and Overall WHO Blood Pressure Indicator Auto-off Power Saving Feature Operated by 4 AA batteries(AC Adapter optional) TROUBLESHOOTINGThis device complles with part 15 of the FCC Rules. Operation is subject to the fol-lowing two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference re-ceived, including interference that may cause undesired operation.
FCCStatementThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,pursuanttopart15ofFCCRules.Theselimitsaredesignedtoprovidereasonableprotectionagainstharmfulinterferenceinaresidentialinstallation.Thisequipmentgeneratesandcanradiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewiththeinstructions,maycauseharmfulinterferencetoradiocommunications.However,thereisnoguaranteethatinterferencewillnotoccurinaparticularinstallation.Ifthisequipmentdoescauseharmfulinterferencetoradioortelevisionreception,whichcanbedeterminedbyturningtheequipmentoffandon,theuserisencouragedtotrytocorrectTheinterferencebyoneormoreofthefollowingmeasures:Reorientorrelocatethereceivingantenna.Increasetheseparationbetweentheequipmentandreceiver.Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiverisconnected.Consultthedealeroranexperiencedradio/TVtechnicianforhelp.ThisdevicecomplieswithPart15ofFCCRules.Operationissubjecttothefollowingtwoconditions:Thisdevicemaynotcauseharmfulinterference,andThisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycauseundesiredoperation.Note:ThemanufacturerisnotresponsibleforanyradioorTVinterferencecausedbyunauthorizedmodificationstothisequipment.suchmodificationscouldvoidtheuser’sauthoritytooperatethisequipment.

Navigation menu