Truly Instrument DB63 BLOOD PRESSURE MONITOR User Manual 61M 1
Truly Instrument Ltd. BLOOD PRESSURE MONITOR 61M 1
2ABG7-DB63_user manaul_Rev1
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2151445 |
| Application ID | UGMfCUWjCuVssjjqIDJoUQ== |
| Document Description | 2ABG7-DB63_user manaul_Rev1 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 269.53kB (3369171 bits) |
| Date Submitted | 2013-12-26 00:00:00 |
| Date Available | 2013-12-27 00:00:00 |
| Creation Date | 2013-12-25 15:49:33 |
| Producing Software | Adobe PDF library 7.77 |
| Document Lastmod | 2013-12-25 15:49:47 |
| Document Title | 61M说明~1 |
| Document Creator | Adobe Illustrator CS2 |
SIZE：84*145MM 正面 SAFETY PRECAUTIONS Babies, young children or individuals who cannot express their consent are not suitable to take blood pressure measurement. Blood Pressure Monitor DB63 Instruction Manual Individuals with serious arteriosclerosis are not suitable to take blood pressure measurement. Self-measurement is not medical treatment. If there are unusual values, please consult your doctor. 3. Pull on the end of the cuff until it wraps securely around your upper arm. Place your arm on a table so that the cuff will be at the same level as your heart. This device complles with part 15 of the FCC Rules. Operation is subject to the fol-lowing two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference re-ceived, including interference that may cause undesired operation. Setup Procedures Installation Prior to first use, Download and install "TRULY" application to your iOS device. (Bluetooth 4.0 capabilities, e.g. iPhone 4S, iPhone 5, NewiPad and iPadMini). 2.3 Date & Time Setting 2.1 Battery Installation 1. Pull and lift on the lock to remove the battery cover. 2. Insert 4 AA batteries with the polarities in correct direction. 3. Replace the battery cover. Press it lightly until the lock securely clicks into place. Note: Replace batteries when the battery indicator “ shows low voltage. ” 1. Press and hold the ” AVG” button for a few seconds until the Year display flashes. 2. Press the“ MEMO” or ”PAGE ” button to select the current year. 3. Press the “ AVG” button to confirm Year Setting. 4. Follow the same steps to set the Month, Date, Hour and Minute. 2.2 Connect AC Adaptor (Optional) 5. You can choose Clock Function “ON” or “OFF” while the monitor is not in use. Press “ MEMO” or ”PAGE ” button to select. Press the ” AVG ” button to confirm. If you have the AC 6V adaptor, plug it into the AC adaptor jack at the top of the device. Remove batteries when using the AC adaptor. Noted: If you select Clock Function “ON”, you will continue at the Alarm Setting section. Otherwise, setting will end. Display Date & Year Kilopascal WHO Light Indictor Memory Recall (Up) Cuff Outlet Average Values (Set) 4. Connect iOS device via Bluetooth (Turn Bluetooth "On" under the "Settings" menu on the iOS device). 5. Open "TRULY" application, and then press the Blood Pressure icon on Measure screen. Page Select (Down) Memory Average Systolic User 1-4 Diastolic Power (Start) Pulse Memory Low Battery Indicator Features One Touch Operation Irregular Heartbeat Detector 7. When the measurement is complete, the cuff will automatically deflate and your systolic and diastolic pressure values and pulse rate will display on Blood Pressure monitor & save on iOS application screen. Pulse Symbol Memory No. (1-99 readings) Bluetooth 4.0 compatible 6. Press the “ ” button. The cuff will automatically inflate and the measurement will start. Package Contents Blood Pressure Mode and Clock Mode 4 User / 396 Total Memory 4 Alarm Clock Settings 5 Mode Averaging Function – Hour, Day, Week, Month, and Overall WHO Blood Pressure Indicator Auto-off Power Saving Feature 8. After that check the measurement history on History screen or chart screen by iOS application. Operated by 4 AA batteries(AC Adapter optional) 4 x AA Alkaline Batteries Arm Cuff Main Unit TAKING MEASUREMENT 2.4 Alarm Setting Note: - Set the correct date and time before taking a measurement. - Date and time should be reset after replacing new batteries. Monitor 1. Sit upright in a chair with your both feet on the floor. 2. Remove tight fitting clothing from you upper arm and thick clothing. Handling AC adapter properly: - Never unplug the power cord with wet hands. - Use only the original AC adapter designed for this unit. PREPARATION Avoid smoking, eating or exercising for 30 minutes before taking measurement Blood pressure readings may change in case of pregnancy. Pregnant women can consult their doctor before taking measurement. Handling batteries properly: - As soon as old batteries run out, replace with new batteries. - Do not use old and new batteries together. - Align the polarities of batteries correctly. - When the unit will not be used for more than 3 months, remove the batteries. Otherwise, batteries may leak and cause damage to the unit. OVERVIEW QUICK START GUIDE 2.5 Language Setting Note: - You will not be able to set alarm clock if Clock Function is set to “OFF”. - You can set a maximum of 4 alarms. When a measurement is completed, DB62V will read aloud the systolic value, diastolic value and pulse automatically. The default language is English. Note: - Avoid smoking, eating or exercising for 30 minutes before taking measurement. - Do not move or talk during measurement. - Measurement can be taken on either arm. 3.1 Sitting Correctly 6. To disable Alarm, Press the ” MEMO ” or ”PAGE ” button to select “OFF” and press the ” AVG” button to confirm. 7. To set 1st Alarm, Press the ” MEMO” or ”PAGE ” button to select “ON”. Press the “ AVG” button to confirm. 8. When Hour digit flashes, press the “ MEMO” or “ PAGE ” button to select Hour. Press the “ AVG”button to confirm. 9. When Minute digit flashes, press the “ MEMO” or “PAGE ” button to select Minute. Press the “ AVG” button to confirm. 10. Follow the same steps to set the 2nd, 3rd, and 4th Alarm Note: - Press the “ ” button anytime during clock setting/alarm setting to start over if an error occurs. - Each alarm clock lasts 45 seconds, or you can turn it off by pressing the “ ” button. 1. Press and hold the “ MEMO” button until the screen displays [LLLx] (x = 0 ~ 7), then release the button. 2. Press the “ MEMO” button to select language. Number 0 ~ 7 represents the following languages: 0 Mute 1 English 2 German 3 Russian 4 Polish 5 Czech 6 Turkish 7 Chinese 3. Press the “ ” button to confirm the selection and begin measurement. 1. Relax 2. Sit upright in a chair with your both feet on the floor. 3. Remove tight fitting clothing from you upper arm and thick clothing. Do not roll up your sleeve if it is too tight. 4. Place your arm on a table so that the cuff will be at the same level as your heart. 3.2 Applying the Arm Cuff 1. Place your elbow on a table and palm facing upward, and wrap the arm cuff around the upper left arm. 2. Pull on the end of the cuff until it wraps securely around your upper arm. Do not over tighten the cuff. Allow 1-2 cm or ½ inch between the bottom of the cuff and your elbow joint. 3. Make sure the cuff is at the same level as your heart. 10 SIZE：84*145MM 反面 3.3 User Setting Irregular Heartbeat Press “PAGE ” button to switch between User Page 1, 2, 3 and 4. 3.4 Taking Measurement 1. Press the “ ” button. The cuff will automatically inflate and the measurement will start. 2. When the measurement is complete, the cuff will automatically deflate and your systolic and diastolic pressure values and pulse rate will display. 3. Remove the arm cuff and take note of your measurement results. Note：You can press the “ at any time. This unit has a unique feature that alerts user of irregular heartbeat detection during measurement. Note：An irregular heartbeat is defined as a heartbeat rhythm that has a variation of more than25% from the average rhythm detected during measurement. If the monitor detects a pulse rate above 100 beats per minute during measurement, the monitor will display the pulse value and “HI” symbol alternately.Example: (102 / HI) If such irregular rhythm occurs twice or more during the same measurement, the display screen will show the pulse value and “IH” symbol alternately. Example: (90 / IH) 105 4.1 View Past Readings 1. Press the “ MEMO” button to enter memory function. Grade 2 hypertension(moderate) (Yellow) 2. If the User Page is not what you want to view, press the “PAGE ” button to select. 100 95 90 85 80 Grade 1 hypertension(mild) (Purple) 3. Press the “ MEMO” button to display the next sets of values. Past readings are displayed from the most recent High- normal(Green) to the oldest. Normal (Sky Blue) 4. This can stored up to 99 sets of past readings for each user (4 x 99). Optimal(Blue) 120 130 140 150 160 170 180 Systolic Pressure Regular but Below Normal Heartbeat WHO Classification Color Optimal --------------------Blue Normal ---------------------Sky Blue High-normal --------------Green Mild hypertension -------Purple Moderate hypertension ---Yellow Severe hypertension ----Red If the monitor detects a pulse rate below 60 beats per minute during measurement, the monitor will display the pulse value and “LO” symbol alternately.Example: (58 / LO) Pulse After measurement, the last set of measured values will be saved automatically after measurement when the unit is turned off by pressing “ ” button or by automatic power off after 3 minutes. mmHg Grade 3 hypertension(severe) (Red) Note：Please consult your doctor if irregular heartbeat occurs often. Besides Systolic and Diastolic values, Pulse will also be displayed after a measurement This unit features a 6-color LED light indicator to display blood pressure level in accordance with the WHO (World Health Organization) classification. 110 ” button to stop measurement 3.5 Heartbeat Readings MEMORY FUNCTIONS 3.6 WHO Light Indicator Diastolic Pressure This unit allows a maximum of 4 users to store measurement records in different User Pages. Regular but Above Normal Heartbeat mmHg 4.2 View Average Readings 1. Press the “ AVG” button to enter Average function. 2. If the User Page is not what you want to view, press the “PAGE ” button to select. 3. Press the “ AVG” button to view different Average Values. 5 different Average Values are available: WHO Light Indicator Example: If your measurement reading is 122/75, the LED light will display the color in blue. 11 TROUBLESHOOTING 12 13 TROUBLESHOOTING STORAGE & MAINTENANCE Symbol on Display Average Values of 1 h One Hour Problem Cause Solution 1 d One Day 7 d One Week Have the batteries run out? Replace new batteries. 30 d One Month No display when you press the Power/Start button Are the battery polarities wrong? Re-align batteries in correct polarities. ALL All Readings “Err P” displayed Fail to inflate Check if the cuff is properly connected. Replace the air tube if it is broken. 4.3 Delete Past Readings User can delete all the past readings stored in each User Page. 1. Press the “PAGE ” button to select the User Page you want to delete. 2. Press and hold the “ MEMO” & “PAGE ” button simultaneously for 5 seconds. Symbol of “ALL EE” will be displayed and all past readings stored in that User Page will be deleted. “Err 1” displayed Deflate too rapidly Return for servicing. “Err 2” displayed Movement during measurement Do not move during measurement Signal interference Remove interfering source e.g. mobile phones, magnets. Incorrect results Measure again. “Err 3” displayed Keep away the unit from direct sunlight, extreme temperatures, humidity or moisture. Use a dry, soft cloth to clean the unit, or if desired, use a cloth lightly dampened with water. Do not use alcohol, benzene, thinner or other volatile liquids to clean the unit. Do not wash or expose the arm cuff to liquid. Remove batteries from the unit when it will not be used for more than 3 months. Note: If your problem cannot be solved by the above, consult your store of purchase. Do not disassemble the unit. 14 15 SPECIFICATIONS Model No. Measurement Method Measurement Range DB63 Oscillometric Pressure: 20 – 280 mmHg Pulse Rate: 40 – 195 beats/min Accuracy Pressure: +/- 3 mmHg Pulse Rate: +/- 5% Inflation Pump driven Pressure Detection Semi-conductor Power Supply 4 x AA batteries or AC/DC adaptor Auto Power Off 3 minutes after last operation Storage Environment -20°C to 60°C, 10% to 95% RH Operation Environment 10°C to 40°C, 15% to 90% RH 6.1” (L) x 5.1” (W) x 4.3” (H) or External Dimensions 15.5 (L) x 13 (W) x 11 (H) cm 410g (batteries excluded) Net Weight For arm circumference of Cuff Dimensions 22-34 cm (Special size to be ordered separately) Cuff, Instruction Manual, Package Content Battery Set, Warranty Card Manufactured in accordance with International Standards Note: Subject to modification without prior notice. 0123 Manufacturer： TEL： FAX： Truly Instrument Ltd. 2/F, Chung Shun Knitting Centre, 1-3 Wing Yip St., Kwai Chung, N.T., Hong Kong （852） 24879803 （852） 21465756 EC-Representative：Wellkang Ltd t/a Wellkang Tech Consulting Suite B, 29 Harley Street, LONDON W1G 9QR, United Kingdom 16 17 18 19 Rev.0 2013/11/11 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct The interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. such modifications could void the user’s authority to operate this equipment.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Extract, Print high-res XMP Toolkit : 3.1-701 Modify Date : 2013:12:25 15:49:47+08:00 Create Date : 2013:12:25 15:49:33+08:00 Metadata Date : 2013:12:25 15:49:47+08:00 Creator Tool : Adobe Illustrator CS2 Format : application/pdf Title : 61M说明~1 Document ID : uuid:022d92f9-733b-45fc-a2dc-0fa592921f84 Instance ID : uuid:e4aa6f6a-430c-4c3d-86fa-e0a2d27311d9 Producer : Adobe PDF library 7.77 Page Count : 2 Container Version : 9 Creator Version : 12 Creator : Adobe Illustrator(R) 12.0 For : User, - Bounding Box : -291 -447 902 1305EXIF Metadata provided by EXIF.tools