Tyco Safety Canada 0010BASET ETHERNET HUB User Manual Installation Instructions

Digital Security Controls Ltd. ETHERNET HUB Installation Instructions

Installation Instructions

Four Channel 10BaseT Ethernet Hub Installation InstructionsBrian Wauchope04/25/00Specifications:! Compliant with IEEE 802.3 specifications.! Standby current draw = 96mA! Maximum current draw = 330mA! Input voltage range = 8 to 15VDC! Maximum Bandwidth = 10MB/sMounting Instructions:1. Locate a suitable mounting location for the Ethernet Hub module inside the cabinet.2. Align the two mounting tabs with the holes located in the bottom of the wire raceway and insert.3. Snap the module into place by pushing the opposite side towards the back of the cabinet.Wiring Instructions:1. Home-run CAT-5 cable to each desired location throughout the dwelling and route into the cabinet.2. Connect each CAT-5 drop to a port on the Ethernet Hub marked ‘Port 1’, ‘Port 2’, ‘Port 3’ or ‘Port 4’.3. Locate a suitable 110VAC receptacle for placement of the wall-mount transformer.4. Route the output cord from the wall-mount transformer (supplied) into the cabinet and plug into theEthernet Hub ‘PWR-IN’ jack.5. Apply power to the wall-mount transformer.Important: All requirements for Installation of CAT 5 should be met for proper operation of connectedequipment.Some requirements of CAT-5:Do not strip sheathing of cable more then required for proper termination. Do not kink or knot cable. Donot crush cable with cable ties. Do not bend cable at right angles or sharp bends. All cable bends shouldhave a minimum of a 2" radius.NOTE: A minimum of two and a maximum of four computers or peripherals must be connected for properoperation of the hub. The network connections can be made on any available port on the hub and are notrestricted to certain ports. Also note that the computers and/or peripherals must be configured properly forpeak performance of the hub. Please consult the manual supplied with your operating system software.CabinetModuleTabs
LED Indication:Label Color FunctionPower Red Power presenceCH-1 Green Link StatusYellow Collision DetectCH-2 Green Link StatusYellow Collision DetectCH-3 Green Link StatusYellow Collision DetectCH-4 Green Link StatusYellow Collision DetectGlobal Act Red CollisionYellow Carrier SenseBandwidth Meter Red >80% Bandwidth UtilizationRed >64% Bandwidth UtilizationYellow >32% Bandwidth UtilizationYellow >16% Bandwidth UtilizationYellow >8% Bandwidth UtilizationGreen >4% Bandwidth UtilizationGreen >2% Bandwidth UtilizationGreen >1% Bandwidth UtilizationTypical Installation:Computer orNetworkablePeripheralComputer orNetworkablePeripheralCAT 5CableComputer orNetworkablePeripheralComputer orNetworkablePeripheralCAT 5Cable9V DC 500mA Adapter

Navigation menu