Tyco Safety Canada 05SKY Cellemetry Alarm Communicator User Manual
Digital Security Controls Ltd. Cellemetry Alarm Communicator 29034654 REV 001 SKYROUTE V2 4 IM EN
a href="https://usermanual.wiki/Tyco-Safety-Canada" itemprop="url">
Tyco Safety Canada >
Installation manual
![Table of ContentsSKYROUTE QUICK INSTALL GUIDE 1Section 1 - Contents 21.1 Important Information .............................................................. 21.2 Skyroute Transceiver Glossary of Terms ................................ 2Section 2 - What is it? 22.1 Introducing the Skyroute Transceiver ...................................... 22.2 Specifications ........................................................................... 2Section 3 - How Does It Work? 33.1 Cellemetry Communication ..................................................... 33.2 Skyroute Reporting Methods ................................................... 3Section 4 - What Do I Do before Installing aSkyroute Transceiver? 5Section 5 - Installing a Skyroute Transceiver 65.1 Location of the Skyroute Unit ................................................. 65.2 Relocating the Skyroute Transceiver ....................................... 65.3 Relocating the Antenna ............................................................ 65.4 UL Requirements ..................................................................... 75.5 Installation ............................................................................... 85.6 Mounting the Skyroute Transceiver ........................................ 85.7 Mounting the Antenna .............................................................. 85.8 Keybus Connection .................................................................. 85.9 Bell IN Terminal ...................................................................... 85.10 Bell OUT Terminal .................................................................85.11 Tamper Terminal ....................................................................85.12 Secure Installation ..................................................................85.13 Connection Diagrams .............................................................85.14 Wiring Skyroute to a DSC/Partner Control Panel ................115.15 Supervised Power Supply Connection .................................11Section 6 - Programming and Activating a Skyroute 126.1 Defaulting ...............................................................................126.2 Programming Options ............................................................126.3 Activating a Skyroute Transceiver .........................................13Section 7 - [803] Skyroute Programming Worksheets 147.1 Defaulting ...............................................................................147.2 Basic Programming ................................................................147.3 Advanced Programming......................................................... 16Section 8 - Testing 25Section 9 - Troubleshooting 25Section 10 - For Your Records 26Appendix A: Reporting Codes 27Appendix B: Zone Alarms/Restorals 29Appendix C: Tamper Alarms /Restorals 31Appendix D: Decimal - Hex - Binary Conversion 32FCC COMPLIANCE STATEMENTCAUTION: Changes or modifications not expressly approved by Digital Security Controls Ltd. could void your authority to use this equipment.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 and Part 22 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does causeharmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:• Re-orient the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/television technician for help.The user may find the following booklet prepared by the FCC useful: “How to Identify and Resolve Radio/Television Interference Problems”. This booklet is available from the U.S. GovernmentPrinting Office, Washington D.C. 20402, Stock # 004-000-00345-4.FCC ID: F5305SKYINDUSTRY CANADA COMPLIANCE STATEMENTThis Class B digital apparatus meets all requirements of the Canadian interference-causing equipment regulations.Cet appareil numérique de la Classe B respecte toutes les exigences de règlement sur le matériel brouilleur du Canada.IC: 160A-05SKYThe term “IC:” before the radio certification number only signifies that Industry Canada technical specifications were met.WARNING: To satisfy FCC RF exposure requirements for mobiletransmitting devices, a separation distance of 30 cm or moreshould be maintained between the antenna of this device andpersons during device operation. To ensure compliance, opera-tion at closer than this distance is not recommended.NOTE:The reference to "Skyroute" throughout this manual is applicable to the following model numbers: Skyroute and Skyroute (A).](https://usermanual.wiki/Tyco-Safety-Canada/05SKY/User-Guide-585886-Page-2.png)