UAB Teltonika Networks RUT950 RUT950 User Manual

UAB Teltonika RUT950

Contents

Users Manual-1

1 USER MANUAL RUT950 LTE Router [Type a quote from the document or the summary of an interesting point. You can position the text box anywhere in the document. Use the Drawing Tools tab to change the formatting of the pull quote text box.]
2 Legal notice Copyright © 2015 TELTONIKA Ltd. All rights reserved. Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of TELTONIKA Ltd is prohibited. The manufacturer reserves the right to modify the product and manual for the purpose of technical improvement without prior notice. Other product and company names mentioned herein may be trademarks or trade names of their respective owners. Attention Before using the device we strongly recommend reading this user manual first. Do not rip open the device. Do not touch the device if the device block is broken. All wireless devices for data transferring may be susceptible to interference, which could affect performance. The device is not water-resistant. Keep it dry. Device is powered by low voltage +9V DC power adaptor. Please do not scratch the device. Scratched device is not fully protected.
3 Table of Contents Legal notice .............................................................................................................................................................. 2 Attention.................................................................................................................................................................. 2 SAFETY INFORMATION ............................................................................................................................................ 8 FCC Safety Information ........................................................................................................................................ 9 Canada, Industry Canada (IC) Notices ................................................................................................................. 9 Radio Frequency (RF) Exposure Information ....................................................................................................... 9 Canada, avis d’Industry Canada (IC) .................................................................................................................... 9 Déclaration d’exposition aux radiations .............................................................................................................. 9 Device connection ............................................................................................................................................. 10 1 Introduction ................................................................................................................................................. 11 2 Specifications ............................................................................................................................................... 11 2.1 Ethernet ................................................................................................................................................... 11 2.2 Wi-Fi ......................................................................................................................................................... 11 2.3 Hardware ................................................................................................................................................. 11 2.4 Electrical, Mechanical & Environmental .................................................................................................. 11 2.5 Applications ............................................................................................................................................. 12 3 Setting up your router ................................................................................................................................. 13 3.1 Installation ............................................................................................................................................... 13 3.1.1 Front Panel and Back Panel ............................................................................................................. 13 3.1.2 Connection status LED indication .................................................................................................... 13 3.1.3 Hardware installation ...................................................................................................................... 14 3.2 Logging in ................................................................................................................................................. 14 4 Operation Modes ......................................................................................................................................... 18 5 Powering Options ........................................................................................................................................ 18 5.1 Powering the device from higher voltage................................................................................................ 19 6 Status ........................................................................................................................................................... 20 6.1 Overview .................................................................................................................................................. 20 6.2 System Information ................................................................................................................................. 21 6.3 Network Information ............................................................................................................................... 22 6.4 Device information .................................................................................................................................. 31 6.5 Services .................................................................................................................................................... 31 6.6 Routes ...................................................................................................................................................... 32 6.6.1 ARP ................................................................................................................................................... 32
4 6.6.2 Active IP-Routes ............................................................................................................................... 32 6.6.3 Active IPv6-Routes ........................................................................................................................... 33 6.7 Graphs ...................................................................................................................................................... 33 6.7.1 Mobile Signal Strength ..................................................................................................................... 33 6.7.2 Realtime Load .................................................................................................................................. 34 6.7.3 Realtime Traffic ................................................................................................................................ 35 6.7.4 Realtime Wireless ............................................................................................................................ 37 6.7.5 Realtime Connections ...................................................................................................................... 38 6.8 Mobile Traffic ........................................................................................................................................... 39 6.9 Speed Test ................................................................................................................................................ 39 6.10 Events Log ............................................................................................................................................ 40 6.10.1 All Events ......................................................................................................................................... 40 6.10.2 System Events .................................................................................................................................. 41 6.10.3 Network Events ............................................................................................................................... 42 6.10.4 Events Reporting ............................................................................................................................. 43 6.10.5 Reporting Configuration .................................................................................................................. 44 7 Network ....................................................................................................................................................... 47 7.1 Mobile ...................................................................................................................................................... 47 7.1.1 General ............................................................................................................................................. 47 7.1.2 SIM Management ............................................................................................................................ 50 7.1.3 Network Operators .......................................................................................................................... 51 7.1.4 Mobile Data Limit............................................................................................................................. 52 7.1.5 SIM Idle protection .......................................................................................................................... 53 7.2 WAN ......................................................................................................................................................... 54 7.2.1 Operation Mode .............................................................................................................................. 54 7.2.2 Common configuration .................................................................................................................... 55 7.3 LAN ........................................................................................................................................................... 61 7.3.1 Configuration ................................................................................................................................... 61 7.3.2 DHCP Server ..................................................................................................................................... 62 7.4 Wireless ................................................................................................................................................... 64 7.5 VLAN......................................................................................................................................................... 67 7.5.1 VLAN Networks ................................................................................................................................ 67 7.5.2 LAN Networks .................................................................................................................................. 69 7.6 Firewall ..................................................................................................................................................... 69 7.6.1 General Settings ............................................................................................................................... 69
5 7.6.2 DMZ .................................................................................................................................................. 70 7.6.3 Port Forwarding ............................................................................................................................... 70 7.6.4 Traffic Rules...................................................................................................................................... 73 7.6.5 Custom Rules ................................................................................................................................... 77 7.6.6 DDOS Prevention ............................................................................................................................. 77 7.6.7 Port Scan Prevention ....................................................................................................................... 80 7.7 Routing ..................................................................................................................................................... 80 7.7.1 Static Routes .................................................................................................................................... 80 7.7.2 Dynamic Routes ............................................................................................................................... 81 7.8 Load Balancing ......................................................................................................................................... 85 8 Remote monitoring and administration ...................................................................................................... 85 9 Services ........................................................................................................................................................ 87 9.1 VRRP ......................................................................................................................................................... 87 9.1.1 VRRP LAN Configuration Settings .................................................................................................... 87 9.1.2 Check Internet connection ............................................................................................................... 88 9.2 TR-069 ...................................................................................................................................................... 88 9.2.1 TR-069 Parameters Configuration ................................................................................................... 88 9.3 Web filter ................................................................................................................................................. 89 9.3.1 Site blocking ..................................................................................................................................... 89 9.3.2 Proxy Based Content Blocker ........................................................................................................... 89 9.4 NTP ........................................................................................................................................................... 90 9.5 VPN .......................................................................................................................................................... 91 9.5.1 OpenVPN .......................................................................................................................................... 91 9.5.2 IPSec ................................................................................................................................................. 94 9.5.3 GRE Tunnel ....................................................................................................................................... 97 9.5.4 PPTP ................................................................................................................................................. 99 9.5.5 L2TP ................................................................................................................................................ 100 9.6 Dynamic DNS .......................................................................................................................................... 100 9.7 SMS Utilities ........................................................................................................................................... 102 9.7.1 SMS Utilities ................................................................................................................................... 102 9.7.2 Call Utilities .................................................................................................................................... 108 9.7.3 User Groups ................................................................................................................................... 109 9.7.4 SMS Management .......................................................................................................................... 110 9.7.5 Remote Configuration .................................................................................................................... 111 9.7.6 Statistics ......................................................................................................................................... 114
6 9.8 SNMP ..................................................................................................................................................... 114 9.8.1 SNMP Settings ................................................................................................................................ 115 9.8.2 TRAP Settings ................................................................................................................................. 116 9.9 SMS Gateway ......................................................................................................................................... 116 9.9.1 Post/Get Configuration .................................................................................................................. 116 9.9.2 Email to SMS .................................................................................................................................. 119 9.9.3 Scheduled Messages ...................................................................................................................... 119 9.9.4 Auto Reply Configuration ............................................................................................................... 120 9.9.5 SMS Forwarding ............................................................................................................................. 121 9.9.6 SMPP .............................................................................................................................................. 123 9.10 Hotspot .............................................................................................................................................. 124 9.10.1 General settings ............................................................................................................................. 124 9.10.2 Internet Access Restriction Settings .............................................................................................. 126 9.10.3 Logging........................................................................................................................................... 126 9.10.4 Landing Page .................................................................................................................................. 128 9.10.5 Radius server configuration ........................................................................................................... 129 9.10.6 Statistics ......................................................................................................................................... 130 9.11 CLI....................................................................................................................................................... 130 9.12 Auto Reboot ....................................................................................................................................... 131 9.12.1 Ping Reboot ................................................................................................................................... 131 9.12.2 Periodic Reboot ............................................................................................................................. 132 9.13 UPNP .................................................................................................................................................. 132 9.13.1 General Settings ............................................................................................................................ 132 9.13.2 Advanced Settings ......................................................................................................................... 132 9.13.3 UPnP ACLs ...................................................................................................................................... 133 9.13.4 Active UPnP Redirects ................................................................................................................... 133 9.14 QoS ..................................................................................................................................................... 133 9.15 MQTT ................................................................................................................................................. 134 9.16 Modbus TCP interface ........................................................................................................................ 139 10 System ........................................................................................................................................................ 140 10.1 Setup Wizard ...................................................................................................................................... 140 10.2 Profiles ............................................................................................................................................... 142 10.3 Administration ................................................................................................................................... 143 10.3.1 General .......................................................................................................................................... 143 10.3.2 Troubleshoot ................................................................................................................................. 144
7 10.3.3 Backup ........................................................................................................................................... 145 10.3.4 Diagnostics ..................................................................................................................................... 147 10.3.5 MAC Clone ..................................................................................................................................... 148 10.3.6 Overview ........................................................................................................................................ 148 10.3.7 Monitoring ..................................................................................................................................... 149 10.4 User scripts ........................................................................................................................................ 149 10.5 Restore point ..................................................................................................................................... 150 10.5.1 Restore point create ...................................................................................................................... 150 10.5.2 Restore point load ......................................................................................................................... 150 10.6 Firmware ............................................................................................................................................ 151 10.6.1 Firmware........................................................................................................................................ 151 10.6.2 FOTA .............................................................................................................................................. 152 10.7 Reboot ................................................................................................................................................ 152 11 Device Recovery ......................................................................................................................................... 153 11.1 Reset button ...................................................................................................................................... 153 11.2 Bootloader’s WebUI ........................................................................................................................... 153 12 Glossary ...................................................................................................................................................... 154 13 Changelog .................................................................................................................................................. 156
8 SAFETY INFORMATION In this document you will be introduced on how to use a RUT950 router safely. We suggest you to adhere to the following recommendations in order to avoid personal injuries and or property damage. You have to be familiar with the safety requirements before using the device! To avoid burning and voltage caused traumas, of the personnel working with the device, please follow these safety requirements. The device is intended for supply from a Limited Power Source (LPS) that power consumption should not exceed 15VA and current rating of over current protective device should not exceed 2A. The highest transient over voltage in the output (secondary circuit) of used PSU shall not exceed 36V peak. The device can be used with the Personal Computer (first safety class) or Notebook (second safety class). Associated equipment: PSU (power supply unit) (LPS) and personal computer (PC) shall comply with the requirements of standard EN 60950-1. Do not mount or service the device during a thunderstorm. To avoid mechanical damages to the device it is recommended to transport it packed in a damage-proof pack. Protection in primary circuits of associated PC and PSU (LPS) against short circuits and earth faults of associated PC shall be provided as part of the building installation. To avoid mechanical damages to the device it is recommended to transport it packed in a damage-proof pack. While using the device, it should be placed so, that its indicating LEDs would be visible as they inform in which working mode the device is and if it has any working problems. Protection against over current, short circuiting and earth faults should be provided as a part of the building installation. Signal level of the device depends on the environment in which it is working. In case the device starts working insufficiently, please refer to qualified personnel in order to repair this product. We recommend forwarding it to a repair center or the manufacturer. There are no exchangeable parts inside the device.
9 FCC Safety Information To maintain compliance with FCC’s RF exposure guidelines, this equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Use on the supplied antenna. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Canada, Industry Canada (IC) Notices This device complies with Industry Canada’s licence-exempt RSS. Operation is subject to the following two conditions: 1) this device may not cause interference, and 2) this device must accept any interference, including interference that may cause undesired operation of the device. Radio Frequency (RF) Exposure Information The radiated output power of the wireless device is below the Industry Canada (IC) radio frequency exposure limits. The wireless device should be used in such a manner such that the potential for human contact during normal operation is minimized. This device has also been evaluated and shown compliant with the IC RF Exposure limits under mobile exposure conditions (antennas are greater then 20cm from a person’s body). Canada, avis d’Industry Canada (IC) Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: 1) l’appareil ne doit pas produire de brouillage; 2) l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. Déclaration d’exposition aux radiations Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.
10 Device connection
11 1 Introduction Thank you for purchasing a RUT950 LTE router! RUT950 is part of the RUT9xx series of compact mobile routers with high speed wireless and Ethernet connections. This router is ideal for people who‘d like to share their internet on the go, as it is not restricted by a cumbersome cable connection. Unrestricted, but not forgotten: the router still supports internet distribution via a broadband cable, simply plug it in to the wan port, set the router to a correct mode and you are ready to browse. 2 Specifications 2.1 Ethernet  IEEE 802.3, IEEE 802.3u standards  3 x LAN 10/100Mbps Ethernet ports  1 x WAN 10/100Mbps Ethernet port  Supports Auto MDI/MDIX 2.2 Wi-Fi  IEEE 802.11b/g/n WiFi standards  2x2 MIMO  AP and STA modes  64/128-bit WEP, WPA, WPA2, WPA&WPA2 encryption methods  2.401 – 2.495GHz Wi-Fi frequency range*  20dBm max WiFi TX power  SSID stealth mode and access control based on MAC address *Supported frequency bands are dependent on geographical location and may not be available in all markets. 2.3 Hardware  High performance 560 MHz CPU with 128 Mbytes of DDR2 memory  5.5/2.5mm DC power socket  Reset/restore to default button  2 x SMA for LTE , 2 x RP-SMA for WiFi antenna connectors  4 x Ethernet LEDs, 1 x Power LED  1 x bi-color connection status LED, 5 x connection strength LEDs 2.4 Electrical, Mechanical & Environmental  Dimensions (H x W x D) 80mm x 106mm x 46mm  Weight 250g  Power supply 100 – 240 VAC -> 9 VDC wall adapter  Input voltage range 9 – 30VDC  Power consumption < 7W  Operating temperature -40° to 75° C  Storage temperature -45° to 80° C  Operating humidity 10% to 90% Non-condensing  Storage humidity 5% to 95% Non-condensing
12 2.5 Applications
13 3 Setting up your router 3.1 Installation After you unpack the box, follow the steps, documented below, in order to properly connect the device. For better Wi-Fi performance, put the device in clearly visible spot, as obstacles such as walls and door hinder the signal. 1. First assemble your router by attaching the necessary antennas and inserting the SIM card. 2. To power up your router, please use the power adapter included in the box. (IMPORTANT: Using a different power adapter can damage and void the warranty for this product.). 3. If you have a wired broadband connection you will also have to connect it to the WAN port of the router. 3.1.1 Front Panel and Back Panel 1,2,3 LAN Ethernet ports 1 LTE auxiliary antenna connector 4 WAN Ethernet port 2 LTE main antenna connector 5,6,7 LAN LEDs 3,5 Wi-Fi antenna connectors 8 WAN LED 4 Reset button 9 Power socket 10 Power LED 11 Connection status LED 12 Signal strength indication LEDs 3.1.2 Connection status LED indication Constant blinking (~ 2Hz) – router is turning on. LED turned off – it has no 4G data connection LED turned on – it has 4G data connection. Explanation of connection status LED indication: 1. Green and red blinking alternatively ever 500 ms: no SIM or bad PIN; 2. Green, red and yellow blinking alternatively every 500 ms: connecting to GSM; 3. Red blinking every 1 sec: connected 2G, but no data session established; 4. Yellow blinking every 1 sec: connected 3G, no data session established; 5. Green blinking every 1 sec: connected 4G, no data session established;
14 Red lit and blinking rapidly while data is being transferred: connected 2G with data session; Yellow lit and blinking rapidly while data is being transferred: connected 3G with data session; Green lit and blinking rapidly while data is being transferred: connected 4G with data session; 3.1.3 Hardware installation 1. Remove back panel and insert SIM card which was given by your ISP (Internet Service Provider). Correct SIM card orientation is shown in the picture. 2. Attach LTE main and Wi-Fi antennas. 3. Connect the power adapter to the socket on the front panel of the device. Then plug the other end of the power adapter into a wall outlet or power strip. 4. Connect to the device wirelessly (SSID: Teltonika_Router) or use Ethernet cable and plug it into any LAN Ethernet port. 3.2 Logging in After you’re complete with the setting up as described in the section above, you are ready to start logging into your router and start configuring it. This example shows how to connect on Windows 7. On windows Vista: click Start -> Control Panel -> Network and Sharing Centre -> Manage network Connections -> (Go to step 4). On Windows XP: Click Start -> Settings -> Network Connections -> (see step 4). You won’t see “Internet protocol version 4(TCP/IPv4)”, instead you’ll have to select “TCP/IP Settings” and click options -> (Go to step 6) We first must set up our network card so that it could properly communicate with the router. 1. Press the start button 2. Type in “network connections”, wait for the results to pop up. SIM 1 (primary) SIM 2 (secondary)
15 3. Click “View network connections” 4. Then right click on your wireless device that you use to connect to other access points (It is the one with the name “Wireless Network Connection” and has signal bars on its icon). 5. Select Internet Protocol Version 4 (TCP/IPv4) and then click Properties 6. By default the router is going to have DHCP enabled, which means that if you select “Obtain an IP address automatically” and “Obtain DNS server address automatically”, the router should lease you an IP and you should be ready to login.
16 7. If you choose to configure manually here’s what you have to do: First select an IP address. Due to the stock settings that your router has arrived in you can only enter an IP in the form of 192.168.1.XXX , where XXX is a number in the range of 2-254 (192.168.1.2 , 192.168.1.254 , 192.168.1.155 and so on… are valid; 192.168.1.0 , 192.168.1.1 , 192.168.1.255 , 192.168.1.699 and so on… are not). Next we enter the subnet mask: this has to be “255.255.255.0”. Then we enter the default gateway: this has to be “192.168.1.1”. Finally we enter primary and secondary DNS server IP’s. One will suffice, though it is good to have a secondary one as well as it will act as a backup if the first should fail. The DNS can be your routers IP (192.168.1.1), but it can also be some external DNS server (like the one Google provides: 8.8.8.8).
17 Right click on the Wireless network icon and select Connect / Disconnect. A list should pop up with all available wireless networks. Select “Teltonika” and click connect. Then we launch our favorite browser and enter the routers IP into the address field: Press enter. If there are no problems you should be greeted with a login screen such as this: Enter the default password, which is “admin01” into the “Password” field and then either click Login with your mouse or press the Enter key. You have now successfully logged into the RUT950! From here on out you can configure almost any aspect of your router.
18 4 Operation Modes The RUT9xx series router supports various operation modes. It can be connected to the internet (WAN) via mobile, standard Ethernet cable or via a wireless network. When connecting to the internet, you may also backup your main WAN connection with one or two backup connections. Any interface can act like backup if configured so. At first router uses its main WAN connection, if it is lost then router tries to connect via backup with higher priority and if that fails too, router tries the second backup option. WAN Main WAN Backup WAN LAN Mobile √ √ x Ethernet √ √ √ Wi-Fi √ √ √ In later sections it will be explained, in detail, how to configure your router to work in a desired mode. 5 Powering Options The RUT9xx router can be powered from power socket or over Ethernet port. Depending on your network architecture you can use LAN 1 port to power the device. RUT9xx can be powered from power socket and over Ethernet simultaneously. Power socket has higher priority meaning that the device will draw power from power socket as long as it is available. When RUT9xx is switching from one power source to the other it loses power for a fraction of the second and may reboot. The device will function correctly after the reboot. Though the device can be powered over Ethernet port it is not compliant with IEEE 802.3af-2003 standard. Powering RUT9xx from IEEE 802.3af-2003 power supply will damage the device as it is not rated for input voltages of PoE standard.
19 5.1 Powering the device from higher voltage If you decide not to use our standard 9 VDC wall adapters and want to power the device from higher voltage (15 – 30 VDC) please make sure that you choose power supply of high quality. Some power supplies can produce voltage peaks significantly higher than the declared output voltage, especially during connecting and disconnecting them. While the device is designed to accept input voltage of up to 30 VDC peaks from high voltage power supplies can harm the device. If you want to use high voltage power supplies it is recommended to also use additional safety equipment to suppress voltage peaks from power supply.
20 6 Status The status section contains various information, like current IP addresses of various network interfaces; the state of the routers memory; firmware version; DHCP leases; associated wireless stations; graphs indicating load, traffic, etc.; and much more. 6.1 Overview Overview section contains various information summaries.
21 6.2 System Information The System Information tab contains data that pertains to the routers operating system. System explanation: Field Name Sample value Explanation 1. Router Name RUT950 Name of the router (hostname of the routers system). Can be changed in System -> Administration. 2. Host name Teltonika-RUT950.com Indicates how router will be seen by other devices on the network. Can be changed in System -> Administration. 3. Router Model Teltonika RUT950 LTE Routers model. 4. Firmware Version RUT9XX_R_00.02.345 Shows the version of the firmware that is currently loaded in the router. Newer versions might become available as new features are added. Use this field to decide whether you need a firmware upgrade or not. 5. Kernel Version 3.10.36 The version of the Linux kernel that is currently running on the router. 6. Local Time 2016-05-06, 05:54:10 Shows the current system time. Might differ from your computer, because the router synchronizes it's time with an NTP server. Format [year-month-day, hours: minutes: seconds]. 7. Uptime 0d 0h 47m 35s (since 2016-05-06, 05:06:35) Indicates how long it has been since the router booted up. Reboots will reset this timer to 0. Format *day’s hours minutes seconds (since year-month-day, hours: minutes: seconds)]. 8. Load Average 1 min: 100%; 5 mins: 87%; 15 mins: 52% Indicates how busy the router is. Let's examine some sample output: "1 min: 22%, 5 mins: 13%, 15 mins: 20%". The first number mean past minute and second number 22% means that in the past minute there have been, on average, 22% processes running or waiting for a resource. 9. Temperature 34° C Device’s temperature Memory explanation: Field Name Sample Value Explanation
22 1. Free 79972 kB / 126556 kB (63%) The amount of memory that is completely free. Should this rapidly decrease or get close to 0, it would indicate that the router is running out of memory, which could cause crashes and unexpected reboots. 2. Cached 15848 kB / 126556 kB (12%) The size of the area of memory that is dedicated to storing frequently accessed data. 3. Buffered 5920 kB / 126556 kB (4%) The size of the area in which data is temporarily stored before moving it to another location. 6.3 Network Information 6.3.1.1 Mobile Display information about mobile modem connections. Mobile information: Field Name Sample Value Explanation 1. Data connection state Connected Mobile data connection status 2. IMEI 860461024350889 Modem's IMEI (International Mobile Equipment Identity) number 3. IMSI 246012101426458 IMSI (International Mobile Subscriber Identity) is used to identify the user in a cellular network 4. SIM card state Ready Indicates the SIM card's state, e.g. PIN required, Not inserted, etc. 5. Signal strength -88 dBm Received Signal Strength Indicator (RSSI). Signal's strength measured in dBm 6. Cell ID 2C86315 ID of operator cell that device is currently connected to
23 7. RSRP -119 dBm Indicates the Reference Signal Received Power 8. RSRQ -11 dBm Indicates the Reference Signal Received Quality 9. SINR -1.2 dBm Indicates the Signal to Interference plus Noise Ratio 10. Operator OMNITEL LT Operator's name of the connected GSM network 11. Operator state Registered (home) GSM network's status 12. Connection type 4G (LTE) Indicates the GSM network's access technology 13. Bytes received 39.9 KB (40832 bytes) How many bytes were received via mobile data connection 14. Bytes sent 27.0 KB (27674 bytes) How many bytes were sent via mobile data connection 6.3.1.2 WAN Display information about WAN connection. WAN information: Field Name Sample Value Explanation 1. Interface Wired Specifies through what medium the router is connecting to the internet. This can either be Wired, Mobile or Wi-Fi. 2. Type Static Specifies the type of connection. This can either be static or DHCP. 3. IP address 192.168.99.69 The IP address that the routers uses to connect the internet.
24 4. WAN MAC 00:1E:42:00:00:01 MAC (Media Access Control) address used for communication in a Ethernet WAN (Wide Area Network) 5. Netmask* 255.255.255.0 Specifies a mask used to define how large the WAN network is 6. Gateway* 192.168.99.254 Indicates the default gateway, an address where traffic destined for the internet is routed to. 7. DNS* 8.8.8.8 Domain name server(s). 8. Connected* 1h 45m 27s How long the connection has been successfully maintained. *-These fields show up on other connection modes. ** - Exclusively to other Modes with DHCP. 6.3.1.3 LAN Display information about LAN connections. LAN information: Field Name Sample Value Explanation 1. Name Lan LAN instance name 2. IP address 192.168.99.218 Address that the router uses on the LAN network. 3. Netmask 255.255.255.0 A mask used to define how large the LAN network is 4. Ethernet MAC address 00:1E:42:00:00:00 MAC (Media Access Control) address used for communication in a Ethernet LAN (Local Area Network) 5. Connected for 1h 53m 56s How long LAN has been successfully maintained. DHCP Leases If you have enabled a DHCP server this field will show how many devices have received an IP address and what those IP addresses are. Field Name Sample Value Explanation 1. Hostname ? DHCP client's hostname
25 2. IP address 192.168.99.120 Each lease declaration includes a single IP address that has been leased to the client 3. LAN name Lan LAN instance name 4. MAC address D4:85:64:65:2B:D4 The MAC (Media Access Control) address of the network interface on which the lease will be used. MAC is specified as a series of hexadecimal octets separated by colons 5. Lease time remaining 10h 11m 13s Remaining lease time for addresses handed out to clients 6.3.1.4 Wireless Wireless can work in two modes, Access Point (AP) or Station (STA). AP is when the wireless radio is used to create an Access Point that other devices can connect to. STA is when the radio is used to connect to an Access Point via WAN. 6.3.1.4.1 Station Display information about wireless connection (Station mode). Client mode information Field Name Sample Value Explanation 1. Channel 1 (2.41 GHz) The channel that the AP, to which the router is connected to, uses. Your wireless radio is forced to work in this channel in order to maintain the connection. 2. Country code 00 (World) Country code. 3. SSID Teltonika_Router The SSID that the AP, to which the routers is connected to, uses. 4. Mode Station (STA) Connection mode – Client indicates that the router is a client to
26 some local AP. 5. Encryption no encryption The AP, to which the router is connected to, dictates the type of encryption. 6. Wireless MAC 00:1E:42:10:80:22 The MAC address of the access points radio. 7. Signal Quality 61% The quality between routers radio and some other device that is connecting to the router. Will show 0% if no devices are trying to connect or are currently maintaining a connection. 8. Bit rate 43.3 MBit/s The physical maximum possible throughput that the routers radio can handle. Keep in mind that this value is cumulative - The bit rate will be shared between the router and other possible devices that connect to the local AP. 6.3.1.4.2 Access Point Display information about wireless connection (Access Point mode). Wireless AP information Field Name Sample Value Explanation 1. Channel 11 (2.46 GHz) The channel which is used to broadcast the SSID and to establish new connections to devices. 2. Country code 00(World) Country code. 3. SSID Teltonika_Router_Test The SSID that is being broadcast. Other devices will see this and will be able to use to connect to your wireless network. 4. Mode Access Point (AP) Connection mode – Master indicates that you router is an access
27 point. 5. Encryption No Encryption The type of encryption that the router will use to authenticate, establish and maintain a connection. 6. Wireless MAC 00:1E:42:00:00:03 MAC address of your wireless radio. 7. Signal Quality 80% The quality between routers radio and some other device that is connecting to the router. Will show 0% if no devices are trying to connect or are currently maintaining a connection. 8. Bit rate 54.0 MBit/s The bit rate will be shared between all devices that connect to the routers wireless network. Additional note: MBit/s indicates the bits not bytes. To get the throughput in bytes divide the bit value by 8, for e.g. 54MBits/s would be 6.75MB/s (Mega Bytes per second). 6.3.1.5 Associated Stations Outputs a list of all devices and their MAC addresses that are maintain a connection with your router right now. This can either be the information of the Access Point that the router is connecting to in STA mode or a list of all devices that are connecting to the router in AP mode: Field Name Sample Value Explanation 1. MAC Address FC:C2:DE:91:36:A6 Associated station's MAC (Media Access Control) address 2. Device Name Android-9aed2b2077a54c74 DHCP client's hostname 3. Signal -54dBm Received Signal Strength Indicator (RSSI). Signal's strength measured in dBm 4. RX Rate 24.0Mbit/s, MCS 0, 20MHz The rate at which packets are received from associated station 5. TX Rate 54.0Mbit/s, MCS 0, 20MHz The rate at which packets are sent to associated station 6.3.1.6 OpenVPN Client Display OpenVPN connection information on client side. Field Name Sample Value Explanation 1. Enabled Yes/No OpenVPN status 2. Status Connected Connection status 3. Type Client A type of OpenVPN instance that has been created 4. IP 10.0.0.2 Remote virtual network's IP address 5. Mask 255.255.255.255 Remote virtual network's subnet mask 6. Time 0h 0m 13s For how long the connection has been established
28 6.3.1.7 OpenVPN Server Display OpenVPN connection information on server side. Field Name Sample Value Explanation 1. Enabled Yes/No OpenVPN status 2. Status Connected Connection status 2. Type Server A type of OpenVPN instance that has been created 3. IP 10.0.0.1 Remote virtual network's IP address 4. Mask 255.255.255.255 Remote virtual network's subnet mask 5. Time 0h 3m 24s For how long the connection has been established 6.3.1.8 Clients information It will show information, when router is configured as OpenVPN TLS server. 6.3.1.9 VRRP VRRP (Virtual Router Redundancy Protocol) for LAN Field Name Sample Value Explanation 1. Common Name Test001 Client connection 2. Real Address 212.59.13.225:52638 Client’s IP address and port number 3. Virtual Address 10.0.0.6 Virtual address which has been given to a client 4. Connection Since Thu May 05 2016 07:46:29 GMT + 0300 (FLE Standard Time) Since when connection has been established
29 Field Name Sample Value Explanation 1. Status Enabled VRRP status 2. Virtual IP 192.168.1.253 Virtual IP address(- es) for LAN’s VRRP (Virtual Router Redundancy Protocol ) cluster 3. Priority 100 Router with highest priority value on the same VRRP (Virtual Router Redundancy Protocol) cluster will act as a master, range [1 - 255] 4. Router** Master Connection mode – Master **-Exclusive to other Modes with Slave. 6.3.1.10 Topology Network scanner allows you to quickly retrieve information about network devices. When router is configured to use Mobile as WAN and Connection type is selected „PPP“, then possible to scan only the LAN side. 6.3.1.11 Access Display information about local and remote active connections status.
30 Field Name Sample Value Explanation 1. Type SSH; HTTP; HTTPS Type of connection protocol 2. Status Disabled/Enabled Connection status 3. Port 22; 80; 443 Connection port used 4. Active Connections 0(0.00B);1(9.26 KB); 6(558.12 KB) Count of active connections and amount of data transmitted in KB **-Exclusive to other Modes with Slave. 6.3.1.11.1 Last Connections Displays information about local and remote last 3 connections status Field Name Sample Value Explanation 1. Type SSH; HTTP; HTTPS Type of connection protocol 2. Date 2016-03-03, 13:40:59 Date and time of connection 3. IP 192.168.2.10 IP address from which the connection was made
31 4. Authentications Status Failed; Succeed Status of authentication attempt 6.4 Device information The page displays factory information that was written into the device during manufacturing process. Field Name Sample Value Explanation 1. Serial number 02345678 Serial number of the device 2. Product code RUT950101010 Product code of the device 3. Batch number 0222 Batch number used during device’s manufacturing process 4. Hardware revision 0321 Hardware revision of the device 5. IMEI 860461024164561 Identification number of the internal modem 6. IMSI 246020100070220 Subscriber identification number of the internal modem 6. Ethernet LAN MAC 3E:83:6F:84:E1:A4 MAC address of the Ethernet LAN ports 7. Ethernet WAN MAC AE:F4:F3:5B:9D:CC MAC address of the Ethernet WAN port 8. Wireless MAC N/A MAC address of the Wi-Fi interface 9. Model ME909-521 Router’s modem model 10. FW version 11.235.07.00.00 Router’s modem firmware version 6.5 Services The page displays usage of the available services.
32 6.6 Routes The page displays ARP table and active IP routes of the device. 6.6.1 ARP Show the routers active ARP table. An ARP table contains recently cached MAC addresses of every immediate device that was communicating with the router. Field Name Sample Value Explanation 1. IP Address 192.168.99.17 Recently cashed IP addresses of every immediate device that was communicating with the router 2. MAC Address 00:25:22:D7:CA:A7 Recently cached MAC addresses of every immediate device that was communicating with the router 3. Interface br-lan Interface used for connection 6.6.2 Active IP-Routes Show the routers routing table. The routing table indicates where a TCP/IP packet, with a specific IP address, should be directed to.
33 Field Name Sample Value Explanation 1. Network ppp Interface to be used to transmit TCP/IP packets through 2. Target 192.168.99.0/24 Indicates where a TCP/IP packet, with a specific IP address, should be directed 3. IP Gateway 0.0.0.0 Indicates through which gateway a TCP/IP packet should be directed 4. Metric 0 Metric number indicating interface priority of usage 6.6.3 Active IPv6-Routes Display active IPv6 routes for data packet transition. Field Name Sample Value Explanation 1. Network loopback Network interface used 2. Target 0:0:0:0:0:0:0:0/0 Indicates where a TCP/IP packet, with a specific IP address, should be directed 3. IPv6-Gateway 0:0:0:0:0:0:0:0/0 Indicates through which gateway a TCP/IP packet should be directed 4. Metric FFFFFFFF Metric number indicating interface priority of usage 6.7 Graphs Real-time graphs show how various statistical data changes over time. 6.7.1 Mobile Signal Strength Displays mobile signal strength variation in time (measured in dBm)
34 Field Name Sample Value Explanation 1. Connection type 3G (WCDMA) Type of mobile connection used 2. Signal -72 dBm Current signal strength value 3. Average -72.0 dBm Average signal strength value 4. Peak -72 dBm Peak signal strength value 6.7.2 Realtime Load This tri-graph illustrates average CPU load values in real time. The graph consists out of three color coded graphs, each one corresponding to the average CPU load over 1 (red), 5 (orange) and 15 (yellow) most recent minutes.
35 Field Name Sample Value Explanation 1. 1/5/15 Minutes Load 0.83 Time interval for load averaging, colour of the diagram 2. Average 0.86 Average CPU load value over time interval (1/5/15 Minute) 3. Peak 1.50 Peak CPU load value of the time interval 6.7.3 Realtime Traffic This graph illustrates average system inbound and outbound traffic over the course of ~3 minutes; each new measurement is taken every 3 seconds. The graph consists out of two colors coded graphs (green graph shows the outbound traffic, blue graph shows inbound traffic). Although not graphed, the page also displays peak loads and average of inbound and outbound traffic.
36 Field Name Explanation 1. Bridge Cumulative graph, which encompasses wired Ethernet LAN and the wireless network. 2. LAN Graphs the total traffic that passes through both LAN network interfaces. 3. WAN (Wired) Graphs the amount of traffic which passed through the current active WAN connection. 4. Mobile Graphs the amount of traffic which passed through the mobile network connection. 5. Wi-Fi Shows the amount of traffic that has been sent and received through the wireless radio.
37 6.7.4 Realtime Wireless Display the wireless radio signal, signal noise and theoretical maximum channel permeability. Average and peak signal levels are displayed.
38 6.7.5 Realtime Connections Displays currently active network connections with the information about network, protocol, source and destination addresses, transfer speed.
39 6.8 Mobile Traffic Displays mobile connection data sent and received in KB of this day, week, Month. By default mobile traffic usage logging is disabled. To use this functionality is needed to enable it. Field Name Sample Value Explanation 1. Enable Enable/Disable Make a functionality active/inactive 2. Interval between records (sec) 60 The interval between logging records (minimum 60 sec) 6.9 Speed Test Speed test is a tool for measuring your internet connection upload and download speeds. You can select servers for manual testing, or use auto test.
40 6.10 Events Log Event log displays such actions as: login, reboot, firmware flashing and reset. 6.10.1 All Events Display all router events, their types and time of occurrence.
41 6.10.2 System Events Display all system events, their type and time of occurrence. Events include authentication or reboot requests, incoming and outgoing SMS and calls, Mails, Configuration changes, DHCP events.
42 6.10.3 Network Events Display information about recent network events like connection status change, lease status change, network type or operator change.
43 6.10.4 Events Reporting Allow to view, enable/disable or modify created rules for events reporting. 6.10.4.1 Events Reporting Configuration Allow to review created rules details and modify them, so after event occurrence, messages or emails are sent to specified address or phone numbers with information about the event.
44 Field Name Sample Value Explanation 1. Enable Enable/Disable Make a rule active/inactive 2. Event type Reboot Select event type about which occurrence information will be sent 3. Event subtype After unexpected shut down Specify event subtype to activate the rule 4. Event subtype All/Loaded Event subtype for which the rule is applied 5. Action Send SMS Action to perform when an event occurs 6. Enable delivery retry Enable/Disable Enables to send SMS again if first try to send SMS was unsuccessful. 7. Message text on Event Router name - %rn; Event type - %et; Event text - %ex; Time stamp - %ts; Message text on specific event 8 Get status after reboot Enable/Disable Receive router status information after reboot 9. Recipient‘s phone number +123456789 For whom you want to send a SMS 6.10.5 Reporting Configuration Displays configured services for event reporting, allows enabling, disabling, viewing and modifying parameters.
45 6.10.5.1 Events Log Report Configuration Allow to change the configuration of periodic events reporting to email or FTP. FTP: Field Name Sample Value Explanation 1. Enable Enable/Disable Make a rule active/inactive 2. Events log System Events log for which the rule is applied 3. Transfer type FTP Events log file transfer type: Email/FTP 4. Compress file Enable Enable/disable compress events log file using gzip 5. Host 192.168.123.123 FTP (File Transfer Protocol) host name, e.g. ftp.exemple.com, 192.168.123.123. Allowed characters (a-z-A-Z0-9!@#$%^&*+-/=?_`{|}~. ) 6. User name Username User name for authentication on SMTP (Simple Mail Transfer Protocol) or FTP (File Transfer Protocol) server. Allowed characters (a-z-A-Z0-9!@#$%^&*+-/=?_`{|}~. ) 7. Password password Password for authentication on SMTP (Simple Mail Transfer Protocol) or FTP (File Transfer Protocol) server. Allowed characters (a-z-A-Z0-9!@#$%^&*+-/=?_`{|}~. ) 8. Interval between reports Week Send report every selected time interval 9. Weekday Monday Day of the week to get events log report 10. Hour 12 Hour of the day to get events log report Email:
46 Field Name Sample Value Explanation 1. Enable Enable/Disable Make a rule active/inactive 2. Events log System Event log for which the rule is applied 3. Transfer type Email Events log file transfer type: Email/FTP 4. Compress file Enable Enable/disable compress events log file using gzip 5. Subject Subject Subject of an email 6. Message YourMessage Message to send in email 7. SMTP server smtp.gmail.com SMTP (Simple Mail Transfer Protocol) server address 8. SMTP server port 25 SMTP (Simple Mail Transfer Protocol) server port 9. Secure connection Enable/Disable Enables/disables secure connection. Use only if server supports SSL or TLS 10. User name User User name for authentication on SMTP (Simple Mail Transfer Protocol) 11. Password ●●●●●●● User password for authentication on SMTP (Simple Mail Transfer Protocol) 12. Sender‘s email address sendersemail@example.com An address that will be used to send your email from. Allowed characters (a-zA-Z0-9._%+-) 13. Recipient‘s email address recipientemail@example.com For whom you want to send an email to. Allowed characters (a-zA-Z0-9._%+-) 14. Interval between reboots Week Send report every select time interval 15. Weekday Sunday Day of the week to get events log report 16. Hour 1 Hour of the day to get events log report
47 7 Network 7.1 Mobile 7.1.1 General 7.1.1.1 Mobile configuration Here you can configure mobile settings which are used when connecting to your local 3G/LTE network. Field Name Sample value Explanation 1. Connection type PPP / NDIS PPP mode uses dialling number to establish data connection. NDIS mode (default) does not use dialling and PPP protocol to establish data connection it is usually faster than PPP mode. 2. Mode NAT / Passthrough / Use bridge NAT mode enables network address translation on router. Bridge mode bridges LTE data connection with LAN. In this mode the router does not have internet connection as ISP provides IP directly to end device (PC, tablet or smart phone).Using Bridge mode will disable most of the router capabilities and you can access your router's settings only by using static IP address on your end device. Passthrough mode is similar with bridge mode except that in passthrough mode router does have internet connection. 3. APN “APN” Access Point Name (APN) is a configurable network identifier used by a mobile device when connecting to a GSM carrier. 4. PIN number “1234” or any number that falls between 0000 and 9999 A personal identification number is a secret numeric password shared between a user and a system that can be used to authenticate the user to the system. 5. Dialing number *99***1# Dialling number is used to establish a mobile PPP (Point-to-Point-Protocol) connection. 6. Authentication method CHAP, PAP or none Authentication method, which your carrier uses to authenticate new connections. (This selection is unavailable on the alternate model) 7. Username “username” Your username that you would use to connect to your carriers network. This field becomes available when you select an authentication method (i.e. authentication method is not “none”). These fields are always enabled on the alternate model. 8. Password “password” Your password that you would use to connect to your carriers network. This field becomes available when you select an authentication method (i.e. authentication method is not “none”). These fields are always enabled on the alternate model.
48 9. Service mode 2G only, 2G preferred, 3G only, 3G preferred, 4G (LTE) only, 4G (LTE) preferred or automatic. Your network preference. If your local mobile network supports 2G, 3G and 4G (LTE) you can specify to which network you wish to connect. E.g.: if you choose 2G, the router will connect to a 2G network, so long as it is available, otherwise it will connect to a network that provides better connectivity. If you select auto, then the router will connect to the network that provides better connectivity. 10. Deny data roaming Enable/Disable If enabled this function prevents the device from establishing mobile data connection while not in home network. 11. Use IPv4 only Enable / Disable If enabled this function makes the device to use only IPv4 settings when connecting to operator. Warning: If an invalid PIN number was entered (i.e. the entered PIN does not match the one that was used to protect the SIM card), your SIM card will get blocked. To avoid such mishaps it is highly advised to use an unprotected SIM. If you happen to insert a protected SIM and the PIN number is incorrect, your card won’t get blocked immediately, although after a couple of reboots OR configuration saves it will. 7.1.1.1.1 Passthrough mode Using Passthrough Mode will disable most of the router capabilities! DHCP mode: Static Enter your computer MAC address (xx:xx:xx:xx:xx:xx) to MAC Address field and select Lease time (expire time for lease addresses). Device, which MAC address will be entered, will get IP from GSM operator. Other connected devices to the router LAN will get IP from router DHCP server, but these devices will not have internet access. DHCP mode: Dynamic Using Dynamic mode, device will get IP from GSM operator , which connect to the router firstly. Using Passthrough in dynamic mode, the DHCP in LAN will be disabled. DHCP mode: No DHCP Using no DHCP mode, IP (also subnet, gateway and DNS) from GSM operator should be entered in device, which is connected to the router LAN, manually. Using Passthrough in no DHCP mode, the DHCP in LAN will be disabled.
49 7.1.1.2 Mobile Data On Demand Field name Possible values Explanation 1. Enable Enable/Disable Mobile Data On Demand function enables you to keep mobile data connection on only when it's in use 2. No data timeout(sec) 1-99999999 A mobile data connection will be terminated if no data is transferred during the timeout period 7.1.1.3 Force LTE network Field name Possible values Explanation 1. Enable Enable/Disable Enable/disable try to connect to LTE network every x seconds (used only if service mode is set to 4G (LTE) preferred) 2. Reregister Enable/Disable If this enabled, modem will be reregister before try to connect to LTE network 3. Interval (sec) 180 - 3600 Time in seconds between tries to connect to LTE network. Range [180-3600]
50 7.1.2 SIM Management Field name Possible values Explanation 1. Primary SIM card SIM 1 / SIM 2 SIM card that will be used in the system as a primary SIM card 2. Enable automatic switching Enable/Disable Automatically switch between primary and secondary SIM cards based on the various rules and criterions defined below 3. Check interval 1-3600 Check interval in seconds 4. On weak signal Enable/Disable Perform a SIM card switch when a signal's strength drops below a certain threshold 5. On data limit* Enable/Disable Perform a SIM card switch when mobile data limit for your current SIM card is exceeded 6. On SMS limit* Enable/Disable Perform a SIM card switch when SMS limit for your current SIM card is exceeded 7. On roaming Enable/Disable Perform a SIM card switch when roaming is detected 8. No network Enable/Disable Perform a SIM card switch when no operator is detected 9. On network denied Enable/Disable Perform a SIM card switch when network is denied 10. On data connection fail Enable/Disable Perform a SIM card switch when data connection fails * Your carrier's data usage accounting may differ. Teltonika is not liable should any accounting discrepancies occur.
51 7.1.3 Network Operators 7.1.3.1 Network Operators This function lets you Scan, Select and enter manual Network Operator to which router should connect. Function will provide great utility when router is in Roaming conditions. Operator is selected only for the active SIM card. In order to specify operator for the other SIM card it must first be selected as primary SIM in “SIM Management”. Note: after clicking Scan for operators’ button- You will lose current mobile connection! For changing network operator status have to be available. There is manual connection to network operator, you have to fill numeric name, and it’s have to be available. 7.1.3.2 Operator List This function lets to create white list/black list based on operator’s code. Field Name Sample Value Explanation 1. SIM card in use SIM 1 / SIM 2 Shows current SIM card’s in use 2. Current operator OMNITEL LT Operator's name of the connected GSM network
52 Field name Possible values Explanation 1. Enable Enable/Disable Enable/disable operators blocking 2. Mode White list/Black list White list - allows every operator on the list and blocks everything else. Black list – block every operator on the list and allow everything else 3. Name Tele2 LT Operator’s name 4. Operator code 24603 Operator’s code 7.1.4 Mobile Data Limit This function lets you limit maximum amount of data transferred on WAN interface in order to minimize unwanted traffic costs. 7.1.4.1 Data Connection Limit Configuration * Your carrier's data usage accounting may differ. Teltonika is not liable should any accounting discrepancies occur. Field Name Sample value Explanation 1. Enable data connection limit Enable/Disable Disables mobile data when a limit for current period is reached 2. Data limit* (MB) 200 Disable mobile data after limit value in MB is reached 3. Period Month/Week/Day Period for which mobile data limiting should apply 4. Start day/ Start hour 1 A starting time for mobile data limiting period
53 7.1.4.2 SMS Warning Configuration * Your carrier's data usage accounting may differ. Teltonika is not liable should any accounting discrepancies occur. 7.1.5 SIM Idle protection Some operators block user SIM cards after period of inactivity. This function enables router to periodically switch to secondary SIM card and establish data connection with mobile network in order to prevent SIM card blocking. 7.1.5.1 Settings Field Name Sample value Explanation 1. Enable Enable/Disable Enables SIM idle protection 2. Period Month / Week Switches between monthly and weekly SIM activation periods 3. Day 1-31 / Monday - Sunday Specifies the day for SIM idle protection activation, 1-31 if Period is Month, and Monday – Sunday if period is week. 4. Hour 1-24 Specifies the hour for SIM idle protection activation 5. Minute 1-60 Specifies the minute for SIM idle protection activation 6. Host to ping 8.8.8.8 Specifies IP address or domain name to send data packages to 7. Ping package size 56 Specifies ping Package size in bytes 8. Ping requests 2 Specifies requests to be sent Field Name Sample value Explanation 1. Enable SMS warning Enable/Disable Enables sending of warning SMS message when mobile data limit for current period is reached 2. Data limit* (MB) 300 Send warning SMS message after limit value in MB is reached 3. Period Month/Week/Day Period for which mobile data limiting should apply 4. Start day/ Start hour 1 A starting time for mobile data limiting period 5. Phone number +37012345678 A phone number to send warning SMS message to, e.g. +37012345678
54 7.1.5.2 Test Tests the functioning of idle protection with your parameters entered at settings tab. Field Name Sample value Explanation 1. SIM SIM1 / SIM2 Displays SIM number 2. SIM state OK (inserted) Displays status of the SIM card 3. Host IP 8.8.8.8 Displays the IP of the Host 4. Ping Success Displays status of ping attempt 7.2 WAN 7.2.1 Operation Mode Your WAN configuration determines how the router will be connecting to the internet. Type Explanation 1. Main WAN Switches between Mobile, Wired and Wi-Fi interface for main WAN 2. Backup WAN/Load balancing Let’s user to select one or two interfaces for WAN backup 3. Interface Name Displays WAN interface name, and changes interface priority, the interface at the table top has the highest priority 4. Protocol Displays protocol used by WAN interface 5. IP Address Displays IP address acquired by specific interface 6. Sort Sorts table rows and changes interface priority, the highest interface has highest priority
55 7.2.2 Common configuration Common configuration allows you to configure your TCP/IP settings for the wan network. You can switch between the Static, DHCP or PPPoE protocol by selecting the protocol that you want to use and then pressing Switch Protocol. 7.2.2.1 General Setup 7.2.2.1.1 Static: This is the configuration setup for when you select the static protocol. Filed name Sample Explanation 1. IPv4 address 192.168.99.162 Your routers address on the WAN network 2. IPv4 netmask 255.255.255.0 A mask used to define how “large” the WAN network is 3. IPv4 gateway 192.168.99.254 Address where the router will send all the outgoing traffic 4. IPv4 broadcast 192.168.99.255 Broadcast address (auto generated if not set). It is best to leave this blank unless you know what you are doing. 5. Use custom DNS servers 8.8.8.8 8.8.6.6 Usually the gateway has some predefined DNS servers. As such the router, when it needs to resolve a hostname (“www.google.com”, “www.cnn.com”, etc…) to an IP address, it will forward all the DNS requests to the gateway. By entering custom DNS servers the router will take care of host name resolution. You can enter multiple DNS servers to provide redundancy in case the one of the server fails.
56 7.2.2.1.2 DHCP: When you select the DHCP protocol you can use it as is, because most networks will not require any additional advanced configuration. 7.2.2.1.3 PPPoE This protocol is mainly used by DSL providers: This is the configuration setup for when you select PPPoE protocol. Filed name Sample Explanation 1. PAP/CHAP username test Your username and password that you would use to connect to your carriers network. 2. PAP/CHAP password your_password A mask used to define how “large” the WAN network is 3. Access Concentrator auto Specifies the name of access concentrator. Leave empty to auto detect. 4. Service Name auto Specifies the name of the service. Leave empty to auto detect. 7.2.2.2 Advanced These are the advanced settings for each of the protocols, if you are unsure of how to alter these attributes it is highly recommended to leave them to a trained professional:
57 7.2.2.2.1 Static Field name Sample value Explanation 1. Disable NAT On/Off Toggle NAT on and off. 2 Override MAC address 86:48:71:B7:E9:E4 Override MAC address of the WAN interface. If your ISP gives you a static IP address it might also bind it to your computers MAC address (i.e. that IP will only work with your computer). In this field you can enter your computers MAC address and fool the gateway in thinking that it is communicating with your computer. 3. Override MTU 1500 Maximum Transmission Unit – specifies the largest possible size of a data packet. 4. Use gateway metric 0 The WAN configuration by default generates a routing table entry. With this field you can alter the metric of that entry. 7.2.2.2.2 DHCP Field name Sample value Explanation 1. Disable NAT Enable/Disable If checked, router will not perform NAT (masquerade) on this interface 2 Use broadcast flag Enable/Disable Required for certain ISPs, e.g. Charter with DOCSIS 3 3. Use default gateway Enable/Disable If unchecked, no default route is configured 4. Use DNS server advertised by peer Enable/Disable If unchecked, the advertised DNS server addresses are ignored 5. User gateway metric 0 The WAN configuration by default generates a routing table entry With this field you can alter the metric of that entry 6. Client ID to send when Specify client ID which will be sent when requesting DHCP
58 requesting DHCP (Dynamic Host Configuration Protocol) 7. Vendor Class to send when requesting DHCP Specify vendor class which be sent when requesting DHCP (Dynamic Host Configuration Protocol) 8. Override MAC address 86:48:71:B7:E9:E4 Override MAC address of the WAN interface. If your ISP gives you a static IP address it might also bind it to your computers MAC address (i.e. that IP will only work with your computer). In this field you can enter your computers MAC address and fool the gateway in thinking that it is communicating with your computer. 9. Override MTU 1500 Maximum transmission unit – specifies the largest possible size of a data packet. 7.2.2.2.3 PPPoE Field name Sample value Explanation 1. Disable NAT Enable/Disable If checked, router will not perform NAT (masquerade) on this interface 2 Use default gateway Enable/Disable If unchecked, no default route is configured 3. Use gateway metric 0 4. Use DNS servers advertised by peer Enable/Disable If unchecked, the advertised DNS server addresses are ignored 5. LCP echo failure threshold 0 Presume peer to be dead after given amount of LCP echo failures, use 0 to ignore failures 6. LCP echo interval 5 Send LCP echo requests at the given interval in seconds, only effective in conjunction with failure threshold 7. Inactivity timeout 0 Close inactive connection after the given amount of seconds, use 0 to persist connection 7.2.2.2.4 IP Aliases IP aliases are a way of defining or reaching a subnet that works in the same space as the regular network.
59 As you can see, the configuration is very similar to the static protocol; only in the example a 99th subnet is defined. Now if some device has an IP in the 99 subnet (192.168.99.xxx) and the subnets gateway metric is “higher” and the device is trying to reach the internet it will reroute it’s traffic not to the gateway that is defined in common configurations but through the one that is specified in IP aliases. You may also optionally define a broadcast address and a custom DNS server. 7.2.2.2.5 Backup WAN configuration Backup WAN is function that allows you to back up your primary connection in case it goes down. There can be two backup connections selected at the same time, in that case, when primary connection fails, router tries to use backup with higher priority and if that is unavailable or fails too, then router tries the backup with lower priority. The majority of the options consist of timing and other important parameters that help determine the health of your primary connection. Regular health checks are constantly performed in the form of ICMP packets (Pings) on your primary connection. When the connections state starts to change (READY->NOT READY and vice versa) a necessary amount of failed or passed health checks has to be reached before the state changes completely. This delay is instituted so as to mitigate “spikes” in connection availability, but it also extends the time before the backup link can be brought up or down. Field Name Sample value Explanation
60 1. Health monitor Interval Disable/5/10/20/30/60/120 Seconds The interval at which health checks are performed 2. Health monitor ICMP host(s) Disable/DNS Server(s) /WAN GW/Custom Where to Ping for a health check. As there is no definitive way to determine when the connection to internet is down for good, you’ll have to define a host whose availability that of the internet as a whole. 3. Health monitor ICMP timeout 1/3/4/5/10 Seconds How long to wait for an ICMP request to come back. Set a higher value if your connection has high latency or high jitter (latency spikes). 4. Attempts before failover 1/3/5/10/15/20 How many checks should fail for your WAN connection to be declared DOWN for good. 5. Attempts before recovery 1/3/5/10/15/20 How many checks should pass for your WAN connection to be declared UP. 7.2.2.3 How do I set up a backup link? First we must select a main link and choose one or two backup links in WAN section. Then push the “Edit” button and configure your WAN and Backup Wan settings to your liking. Click Save and wait until the settings are applied. Now in the Status -> Network Information -> WAN page there should be a status indication for the backup WAN. If everything is working correctly you should see something like this: The above picture shows the status for Backup WAN configured on a wired main link. You can now simulate a downed link by simply unplugging your Ethernet WAN cable. When you’ve done so you should see this: And, if you plug the cable back in you should, again, see this:
61 7.3 LAN This page is used to configure the LAN network, where all your devices and computers that you connect to the router will reside. 7.3.1 Configuration 7.3.1.1 General Setup Field name Sample value Explanation 1. IP address 192.168.1.1 Address that the router uses on the LAN network 2 IP netmask 255.255.255.0 A mask used to define how large the LAN network is 3. IP broadcast IP broadcasts are used by BOOTP and DHCP clients to find and send requests to their respective servers 7.3.1.2 Advanced settings Field name Sample value Explanation 1. Accept router advertisements Enable/Disable If enabled allows accepting router advertisements (Disabled by default) 2. Override MTU 1500 MTU (Maximum Transmission Unit) specifies the largest possible size of a data packet 3. Use gateway metric 0 With this field you can alter the metric of that entry 4. Use WAN port as LAN Enable/Disable Enable/disable WAN port using as LAN port
62 7.3.2 DHCP Server The DHCP server is the router side service that can automatically configure the TCP/IP settings of any device that requests such a service. If you connect a device that has been configured to obtain IP address automatically the DHCP server will lease an IP address and the device will be able to fully communicate with the router. 7.3.2.1 General Setup Field Name Sample value Explanation 1. DHCP Enable / Disable/ DHCP Relay Manage DHCP server 2. Start 100 The starting address of the range that the DHCP server can use to give out to devices. E.g.: if your LAN IP is 192.168.2.1 and your subnet mask is 255.255.255.0 that means that in your network a valid IP address has to be in the range of [192.168.2.1 – 192.168.2.254](192.168.2.0 and 192.168.2.255 are special unavailable addresses). If the Start value is set to 100 then the DHCP server will only be able to lease out addresses starting from 192.168.2.100 3. Limit 150 How many addresses the DHCP server gets to lease out. Continuing on the above example: if the start address is 192.168.2.100 then the end address will be 192.168.2.254 (100 + 155 – 1 = 254). 4. Lease time 12 How long can a leased IP be considered valid. An IP address after the specified amount of time will expire and the device that leased it out will have to request for a new one. Select Hour or Minute (minimum 2min).
63 7.3.2.2 Advanced settings You can also define some advanced options that specify how the DHCP server will operate on your LAN network. 7.3.2.3 Static Leases This page is used to configure static IP leases. 7.3.2.4 IP Aliases 7.3.2.4.1 General Setup IP aliases are the way of defining or reaching a subnet that works in the same space as the regular network. Field Name Sample Value Explanation 1. Dynamic DHCP Checked/Unchecked Dynamically allocate client addresses, if set to 0 only clients present in the ethers files are served 2. Force Checked/Unchecked Forces DHCP serving even if another DHCP server is detected on the same network segment. 3. IP netmask You can override your LAN netmask here to make the DHCP server think it’s serving a larger or a smaller network than it actually is. 4. DHCP Options Additional options to be added for this DHCP server. For example with '26,1470' or 'option:mtu, 1470' you can assign an MTU per DHCP. Your client must accept MTU by DHCP for this to work. Field Name Sample Value Explanation 1. Hostname Printer Name which will be linked with IP address. 2. MAC address 10:a5:d0:70:9c:72 (192.168.1.104) Device MAC address 3. IP address 192.168.1.104 Device IP address
64 7.3.2.4.2 Advanced Settings You may also optionally define a broadcast address and a custom DNS server. 7.4 Wireless On this page you can configure your wireless settings. Depending on whether your WAN mode is set to Wi-Fi or not, the page will display either the options for configuring an Access Point or options for configuring a connection to some local access point.
65 Access Point: Here you can see the Overview of the wireless configuration. It is divided into two main sections – device and interface. One is dedicated to configuring hardware parameters other – software. Here you can toggle the availability of the wireless radio and the physical channel frequency. Important note: As seen in the picture you should always Save before toggling the radio on and off. SSID – Your wireless networks identification string. This is the name of your Wi-Fi network. When other Wi-Fi capable computers or devices scan the area for Wi-Fi networks they will see your network with this name. Hide SSID – Will render your SSID hidden from other devices that try to scan the area. Connect to WRP100 automatically – let Teltonika WRP100 wireless repeater connect to this router automatically. 7.4.1.1 Device 7.4.1.1.1 Advanced Settings Here you can configure more advanced parameters:
66 Field name Sample value Explanation 1. Mode Auto, b, g, g+n Different modes provide different throughput and security options. 2. Country Code Any ISO/IEC 3166 alpha2 country code Selecting this will help the wireless radio configure its internal parameters to meet your countries wireless regulations. 3. Transmit power 20%/40%/60%/80%/100% Select Wi-Fi signal power 4. Fragmentation threshold 2346 The smallest packet size that can be fragmented and transmitted by multiple frames. In areas were interference is a problem, setting a lower fragment threshold might help reduce the probability of unsuccessful packet transfers, thus increasing speed. 5. RTS/CTS Threshold 2346 Request to send threshold. It can help resolve problems arising when several access points are in the same area, contending. 7.4.1.2 Interface 7.4.1.2.1 Security Encryption – there are many modes of encryption, a distinctive classis pointed out below. First select an encryption method: TKIP, CCMP, TKIP&CCMP and auto. Note: Some authentication methods won’t support TKIP (and TKIP&CCMP) encryption. After you’ve selected your encryption method, you should enter your pass phrase, which must be at least 8 characters long. 7.4.1.2.2 MAC-Filter Filter – you can define a rule for what to do with the MAC list you’ve defined. You can either allow only the listed MACs or allow ALL, but forbid only the listed ones.
67 7.4.1.2.3 Advanced settings Separate clients – prevents Wi-Fi clients from communicating with each other on the same subnet. Increase TTL packet size – increase TTL packet size for incoming packets. 7.4.1.3 Client RUT9xx can work as a Wi-Fi client. Client mode is nearly identical to AP, except for the fact that most for the options are dictated by the wireless access point that the router is connecting to. Changing them can result in an interrupted connection to an AP. In addition to standard options you can also click the Scan button to rescan the surrounding area and attempt to connect to a new wireless access point. 7.5 VLAN On this page you can configure your Virtual LAN settings, either Port based or Tag based. 7.5.1 VLAN Networks 7.5.1.1 VLAN Functionality Field Name Sample Value Explanation 1. VLAN mode Disabled / Port based / Tag based Lets user to choose the VLAN mode or disable VLAN functionality.
68 7.5.1.2 VLAN Network List If VLAN mode – Port based: Field Name Sample Value Explanation 1. VLAN ID 1 VLAN Identification number, allowed in range (1-4094) 2. LAN ports 1 / 2 / 3 on Switches each LAN port between ON, OFF or tagged state. 3. Wireless access points Enabled / Disabled Assign selected access point(s) to selected LAN. 4. LAN None Select to which LAN to assign selected LAN ports and wireless access points. If VLAN mode – Tag based: Field Name Sample Value Explanation 1. VLAN ID 2 VLAN Identification number, allowed in range (1-4094) 3. Wireless access points Enabled / Disabled Assign selected access point(s) to selected LAN. 4. LAN None Select to which LAN to wireless access point(s).

Navigation menu