UAB Teltonika RUT955A GPS Tracker User Manual 3

UAB Teltonika GPS Tracker 3

User Manual 3

 181  10.6.2 FOTA    Field name Explanation 1. Server address Specify server address to check for firmware updates. E.g. “http://teltonika.sritis.lt/rut9xx_auto_update/clients/” 2. User name User name for server authorization. 3.  Password  Password name for server authorization. 4. Enable auto check  Check box to enable automatic checking for new firmware updates. 5. Auto check mode  Select when to perform auto check function. 6. WAN wired Allows to update firmware from server only if routers WAN is wired (if box is checked).  10.7 Reboot  Reboot router by pressing button “Reboot”.    11 Device Recovery The  following  section  describes  available  options  for  recovery  of  malfunctioning  device.  Usually  device  can become unreachable due to power failure during firmware upgrade or if its core files were wrongly modified in the file system. Teltonika’s routers offer several options for recovering from these situations.
 182  11.1 Reset button Reset button is located on the back panel of the device. Reset button has several functions: Reboot the device. After the device has started and if the reset button is pressed for up to 4 seconds the device will reboot. Start of the reboot will be indicated by flashing of all 5 signal strength LEDs together with green connection status LED. Reset to defaults. After the device has started if the reset button is pressed for at least 5 seconds the device will reset all user changes to factory defaults and reboot. To help user to determine how long the reset button should be pressed, signal strength LEDs indicates the elapsed time. All 5 lit LEDs means that 5 seconds have passed and reset button can be released. Start of the reset to defaults will be indicated by flashing of all 5 signal strength LEDs together with red connection status LED. SIM PIN on the main SIM card is the only user parameter that is kept after reset to defaults. 11.2 Bootloader’s WebUI Bootloader also provides a way to  recover  the  router functionality when the firmware is damaged. To make it easier to use bootloader has its own webserver that can be accessed with any web browser. Procedure for starting bootloader’s webserver: Automatically.  It  happens  when  bootloader  does  not  detect  master  firmware.  Flashing  all  4  Ethernet  LEDs indicate that bootloader’s webserver has started. Manually. Bootloader’s webserver can be requested by  holding reset button for 3 seconds while powering the device on. Flashing all 4 Ethernet LEDs indicates that bootloader’s webserver has started. Bootloader’s WebUI can be accessed by typing this address in the web browser: http://192.168.1.1/index.html Note:  it  may  be  necessary  to  clear  web  browser’s  cache  and  to  use  incognito/anonymous  window  to  access bootloader’s WebUI.     12 Glossary: WAN – Wide Area Network is a telecommunication network that covers a broad area (i.e., any network that links across metropolitan, regional, or national boundaries). Here we use the term WAN to mean the external network that the router uses to reach the internet. LAN – A local area network (LAN) is a computer network that interconnects computers in a limited area such as a home, school, computer laboratory, or office building.
 183  DHCP – The Dynamic Host Configuration Protocol (DHCP) is a network configuration protocol for hosts on Internet Protocol (IP) networks. Computers that are connected to IP networks must be configured before they can communicate with other hosts. The most essential information needed is an IP address, and a default route and routing prefix. DHCP eliminates the manual task by a network administrator. It also provides a central database of devices that are connected to the network and eliminates duplicate resource assignments. ETHERNET CABLE – Refers to the CAT5 UTP cable with an RJ-45 connector. AP –  Access point. An access point is  any device  that  provides  wireless  connectivity for wireless clients. In this case, when you enable Wi-Fi on your router, your router becomes an access point. DNS –  Domain Name Resolver.A server that  translates names such as  www.google.lt to  their  respective  IPs.  In order  for  your  computer  or  router  to  communicate  with  some  external  server  it  needs  to  know  it’s  IP,  its  name “www.something.com” just won’t do. There are special servers set in place that perform this specific task of resolving names into IPs, called Domain Name servers. If you have no DNS specified you can still browse the web, provided that you know the IP of the website you are trying to reach. ARP – Short for Adress Resolution Protocol,a network layerprotocol used to convert an IP address into a physical address (called a DLC address), such as an Ethernet address. PPPoE – Point-to-Point  Protocol over Ethernet. PPPoE is a specification for connecting the users on an Ethernet to the internet through a common broadband medium, such as DSL line, wireless device or cable modem. DSL – digital subscriber line - it is a family of technologies that provide internet access by transmitting digital data using a local telephone network which uses the public switched telephone network. NAT –  network address translation – an internet standard that enables a local-area network (LAN) to use one set of IP addresses for internet traffic and a second set of addresses for external traffic. LCP  –  Link  Control  Protocol  –  a  protocol  that  is  part  of  the  PPP  (Point-to-Point  Protocol).  The  LCP  checks  the identity of the linked device and either accepts or  rejects the peer device, determines the acceptable packet size for transmission, searches for errors in configuration and can terminate the link if the parameters are not satisfied. BOOTP  –  Bootstrap  Protocol  –  an  internet  protocol  that  enables  a  diskless  workstation to  discover  its  own  IP address, the IP address of a BOOTP server on the network, and a file to be loaded into memory to boot the machine. This enables the workstation to boot without requiring a hard or floppy disk drive. TCP  –  Transmission  Control Protocol  –  one of  the main protocols in  TCP/IP networks. Whereas the IP protocol deals only with packets, TCP enables two hosts to establish a connection and exchange streams of data. TCP guarantees delivery of data and also guarantees that packets will be delivered in the same order in which they were sent. TKIP – Temporal Key Integrity Protocol – scrambles the keys using hashing algorithmand, by adding an integrity-checking feature, ensure that the keys haven’t been tampered with. CCMP  –  Counter  Mode  Cipher  Block  Chaining  Message  Authentication  Code  Protocol  –  encryption  protocol designed  for  Wireless  LAN  products  that  implement  the  standards  of  the  IEEE  802.11i  amendment  to  the  original IEEE802.11  standard.  CCMP  is  an  enchanged  data  cryptographic  encapsulation  designed  for  data  confidentiality  and based upon the Counter Mode with CBC-MAC (CCM) of the AES (Advanced Encyprion Standard) standard. MAC – Media  Access  Control  – hardware address that uniquely identifies each node of a  network.  In  IEEE  802 networks, the Data Link  Control (DCL) layer of the PSO Reference Model is divided into two sub-layers: the Logical Link
 184  Control (LLC) layer and  the  Media  Access Control layer. The MAC  layer interfaces directly with the  network medium. Consequently, each different type of network medium requires a different MAC layer. DMZ – Demilitarized Zone – a computer or small subnetwork that sits between a trusted internal network, such as a corporate private LAN, and an untrusted external network, such as the public internet.  UDP – User Datagram Protocol – a connectionless protocol that, like TCP, runs on  top of IP networks. Provides very few error recovery services, offering instead a direct way to send and receive datagrams over IP network. VPN – Virtual Private Network – a network that is constructed by using public wires — usually the Internet — to connect to a private network, such as a company's internal network. VRRP – Virtual Router Redundancy Protocol - an election protocol that dynamically assigns responsibility for one or more virtual router(s) to the VRRP  router(s) on  a LAN,  allowing several routers on a multiaccess link to utilize the same virtual IP address. GRE  Tunnel  –  Generic  Routing  Encapsulation  -  a  tunneling  protocol  developed  by  Cisco  Systems  that  can encapsulate  a  wide  variety  of  network  layerprotocols  inside  virtual  point-to-point  links  over  an  Internet  Protocol internetwork. PPPD – Point to Point Protocol Daemon – it is used to manage network connections between two nodes on Unix-likeoperating systems. It is configured using command-line arguments and configuration files. SSH – Secure SHell - a program to log into another computer over a network, to execute commands in a remote machine, and to move files from one machine to another. It provides strong authentication and secure communications over insecure channels. VRRPD – Virtual Router Redundancy Protocol – it is designed to eliminate the single point of failure associated with statically routed networks by automatically providing failover using multiple LAN paths through alternate routers. SNMP –  Simple Network Management Protocol - a set of protocols for managing complex networks. SNMP works by sending messages, called protocol data units (PDUs), to different parts of a network.
 185  13 Changelog Nr. Date Version Comments 1 2017-02-01 1.26  2 2017-08-03 1.30 Page 2
  FCC ID : 2AET4RUT955A FCC Regulations (15C)This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.   (15B)This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.   These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:   Reorient or relocate the receiving antenna.   Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.   Consult the dealer or an experienced radio/TV technician for help.  FCC RF Exposure Intormation  This device complies with FCC RF radiation exposure limits set forth for an uncontrolled enviroment. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter and must be installed to provide a separation distance of at least 20cm from all persons.
   IC ID : 23005-RUT955A  Canada Regulations: This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions:   (1) This device may not cause interference; and   (2) This device must accept any interference, including interference that may cause undesired operation of the device.   Le présentappareilestconforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitationestautorisée aux deux conditions suivantes :   (1) l’appareil ne doit pas produire de brouillage;   (2) l’utilisateur de l’appareildoit accepter tout brouillageradioélectriquesubi, mêmesi le brouillageest susceptible d’encompromettre le fonctionnement.   This transmiter must not be co-located or operatng in conjuncton with any other antenna or transmiter. This equipment should be installed and operated with a minimum distance of 20 centmeters between the radiator and your body. Cet émeteur ne doit pas être Co-placé ou ne fonctonnant en même temps qu’aucune autre antenne ou émeteur. Cet équipement devrait être installé et actonné avec une distance minimum de 20 centmètres entre le radiateur et votre corps.

Navigation menu