UBS Axcera LU100AL 100-Watt UHF Translator User Manual pioneer 2kw indd

UBS-Axcera 100-Watt UHF Translator pioneer 2kw indd

Data Sheet

Pioneer (Preliminary)Low Power Transmitter 10W-2kWDesigned to provide broadcasters with a product that will meet their needs like no other solution on the market, this new low to medium power transmitter line uses the latest devices for broadband operation across each band. This allows users to minimize spare parts stock, which is especially important to group owners and networks, and also enables simple and inexpensive channel changes.The very compact and completely modular design uses a chassis/backplane conguration with parallel amplier and power supply modules which can be removed and replaced while the transmitter is on the air. Additionally, the Pioneer series was designed to be eld upgradable to digital operation.Congurations are available in power levels from 10 watts to 2 kilowatts analog and up to 1 kilowatt DTV, and all are manufactured in the USA by Axcera - The RF Experts.
Speci cations published here are current as of the date of publication of this document. Because we are continuously improving our products, Axcera reserves the right to change speci cations without prior notice. At any time, you may verify product speci cations by contacting our of ce. Axcera views it’s patent portfolio as an important corporate asset and vigorously enforces its patents. Products or features contained herein may be covered by one or more U.S. or foreign patents.0308R2 © 2003 AXCERA All Rights Reserved An Equal Opportunity Employer A Platinum Equity CompanyVisual PerformanceFrequency Range 470 to 806 MHzCarrier Stability (Transmitters) Standard ±1 kHz Optional ±350 Hz w/PFC ±1HzFrequency Translation Stability (Translators) Standard ±1 kHz Optional ±350 Hz w/PFC ±1Hz Regulation of RF Output Power 3%Output Variation (Over 1 Frame) 2%Sideband Response -1.25 MHz and below -20 dB -0.75 to -0.5 MHz +0.5 db, -2 dB -0.5 to +3.58 MHz ±0.5 dB +3.58 MHz to +4.18 MHz +0.5, -1.0 dBFreq Response vs. Brightness ±0.5 dBVisual Modulation Capability 1%Differential Gain 5%Incidental Phase Modulation ±3°Linearity (Low Frequency) 5%Aural PerformanceFrequency Deviation Capability ±75 kHz(Transmitters)Distortion 0.5%FM Noise -60 dBAM Noise -55 dBAural to Visual Separation 4.5 MHz ± 100HzComposite Audio Input (Multi-channel sound)(Transmitters)Input Level 1V peak, nominalInput Impedance 75 ohms, unbalancedFrequency Range±0.1 dB response 50 Hz to 50 kHz±0.5 dB response 30 Hz to 120 kHzMonaural Audio Input (Transmitters)Input Level 0 to +10 dBmInput 600 ohms, balancedFreq Range (±0.5 dB resp.) 30 Hz to 15 kHzPre-emphasis 75µsSubcarrier Input (Transmitters)Input Level 1V peak, nominalInput Impedance 75 ohms, unbalancedFreq Range (±0.5 dB resp.) 20 kHz to 120 kHzPioneer (Preliminary)Low Power Transmitter 10W - 2kWVisual Performance (continued)Differential Phase ±3°Signal-to-Noise Ratio 55 dB2t K-Factor 2%Noise Factor (Translators) 5 dB (Max)w/Input Preamp 3 dB (Max)Input Dynamic Range (Translators) -60 dB to-15 dBm w/Input Preamp -75 dBm to -30 dBmEnv. Delay (Transmitters) Per FCC StandardVideo Input (Transmitters) 75 ohms (Loop through)Harmonics -60 dB or betterIntermodulation Products -52 dB or betterSpurious (›3 MHz from channel edge)100W and lower -50dB or betterGreater than 100W -60dB or betterGeneralModel Number* LU10Ax LU100Ax LU250Ax LU500Ax LU1000Ax LU2000Ax Power Output (Watts) Visual (Peak) 10 100 250 500 1000 2000 Aural (Avg.) 1 10 15 50 100 200 Output Connector N N 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA Power Consumption (Watts) 250 675 1100 1900 3500 6700 Input Power Line Voltage (Volts) 117/230 ±10% 230 ± 10% Power Requirements Single Phase, 50 or 60 Hz Size (H x W x D) 8.75”x19”x23” 55”x22”x34” (Chassis Only)Weight (lbs.) 45 45 340 360 400 550Operational Temperature Range 0 to +50°, derate 2°C/1000 ft.Maximum Altitude3 8500 feet (2600m) AMSLOperational Humidity Range 0% to 95% non-condensingRF Load Impedance 50 Ω* For transmitters use “T” suf x, translators use “L” suf x (ex. LU100AT - 100W Transmitter)

Navigation menu