UBS Axcera LU100AL 100-Watt UHF Translator User Manual pioneer 2kw indd

UBS-Axcera 100-Watt UHF Translator pioneer 2kw indd

Data Sheet

Download: UBS Axcera LU100AL 100-Watt UHF Translator User Manual pioneer 2kw indd
Mirror Download [FCC.gov]UBS Axcera LU100AL 100-Watt UHF Translator User Manual pioneer 2kw indd
Document ID366900
Application IDR8xFNVYwOXdEjde33oBx3Q==
Document DescriptionData Sheet
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize15.77kB (197133 bits)
Date Submitted2003-10-21 00:00:00
Date Available2003-12-01 00:00:00
Creation Date2003-07-28 17:35:03
Producing SoftwareAdobe PDF Library 5.0
Document Lastmod2003-10-16 10:23:53
Document Titlepioneer_2kw.indd
Document CreatorAdobe InDesign 2.0.1

Pioneer (Preliminary)
Low Power Transmitter 10W-2kW
Designed to provide broadcasters with a product that will meet their needs like
no other solution on the market, this new low to medium power transmitter
line uses the latest devices for broadband operation across each band. This
allows users to minimize spare parts stock, which is especially important to
group owners and networks, and also enables simple and inexpensive channel
changes.
The very compact and completely modular design uses a chassis/backplane
configuration with parallel amplifier and power supply modules which can be
removed and replaced while the transmitter is on the air. Additionally, the Pioneer
series was designed to be field upgradable to digital operation.
Configurations are available in power levels from 10 watts to 2 kilowatts
analog and up to 1 kilowatt DTV, and all are manufactured in the USA by
Axcera - The RF Experts.
Pioneer (Preliminary)
Low Power Transmitter 10W - 2kW
Visual Performance
Visual Performance (continued)
Aural Performance
Frequency Range
470 to 806 MHz
Carrier Stability (Transmitters)
Standard
±1 kHz
Optional
±350 Hz
w/PFC
±1Hz
Frequency Translation Stability (Translators)
Standard
±1 kHz
Optional
±350 Hz
w/PFC
±1Hz
Regulation of RF Output Power
3%
Output Variation (Over 1 Frame)
2%
Sideband Response
-1.25 MHz and below
-20 dB
-0.75 to -0.5 MHz
+0.5 db, -2 dB
-0.5 to +3.58 MHz
±0.5 dB
+3.58 MHz to +4.18 MHz
+0.5, -1.0 dB
Freq Response vs. Brightness
±0.5 dB
Visual Modulation Capability
1%
Differential Gain
5%
Incidental Phase Modulation
±3°
Linearity (Low Frequency)
5%
Differential Phase
Signal-to-Noise Ratio
2t K-Factor
Noise Factor (Translators)
w/Input Preamp
Input Dynamic Range (Translators)
Frequency Deviation Capability
(Transmitters)
Distortion
FM Noise
AM Noise
Aural to Visual Separation
w/Input Preamp
Env. Delay (Transmitters)
Video Input (Transmitters)
Harmonics
Intermodulation Products
Spurious (›3 MHz from channel edge)
100W and lower
Greater than 100W
±3°
55 dB
2%
5 dB (Max)
3 dB (Max)
-60 dB to
-15 dBm
-75 dBm
to -30 dBm
Per FCC Standard
75 ohms
(Loop through)
-60 dB or better
-52 dB or better
-50dB or better
-60dB or better
±75 kHz
0.5%
-60 dB
-55 dB
4.5 MHz
± 100Hz
Composite Audio Input (Multi-channel sound)
(Transmitters)
Input Level
Input Impedance
Frequency Range
±0.1 dB response
±0.5 dB response
Monaural Audio Input (Transmitters)
Input Level
Input
Freq Range (±0.5 dB resp.)
Pre-emphasis
Subcarrier Input (Transmitters)
Input Level
Input Impedance
Freq Range (±0.5 dB resp.)
1V peak,
nominal
75 ohms,
unbalanced
50 Hz to 50 kHz
30 Hz to 120 kHz
0 to +10 dBm
600 ohms,
balanced
30 Hz to 15 kHz
75µs
1V peak,
nominal
75 ohms,
unbalanced
20 kHz to
120 kHz
General
Model Number*
Power Output (Watts)
Visual (Peak)
Aural (Avg.)
Output Connector
Power Consumption (Watts)
Input Power
Line Voltage (Volts)
Power Requirements
Size (H x W x D)
Weight (lbs.)
Operational Temperature Range
Maximum Altitude 3
Operational Humidity Range
RF Load Impedance
LU10Ax LU100Ax
LU250Ax
LU500Ax
LU1000Ax
LU2000Ax
10
250
250
15
7/ ” EIA
1100
500
50
7/ ” EIA
1900
1000
100
7/ ” EIA
3500
2000
200
7/ ” EIA
6700
100
10
675
117/230 ±10%
8.75”x19”x23”
(Chassis Only)
230 ± 10%
Single Phase, 50 or 60 Hz
55”x22”x34”
45
45
340
0 to +50°, derate 2°C/1000 ft.
8500 feet (2600m) AMSL
0% to 95% non-condensing
360
400
550
50 Ω
* For transmitters use “T” suffix, translators use “L” suffix (ex. LU100AT - 100W Transmitter)
Specifications published here are current as of the date of publication of this document. Because we are continuously improving our products, Axcera reserves the right to
change specifications without prior notice. At any time, you may verify product specifications by contacting our office. Axcera views it’s patent portfolio as an important
corporate asset and vigorously enforces its patents. Products or features contained herein may be covered by one or more U.S. or foreign patents.
0308R2
© 2003 AXCERA
All Rights Reserved
An Equal Opportunity Employer
A Platinum Equity Company

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Modify Date                     : 2003:10:16 10:23:53-04:00
Create Date                     : 2003:07:28 17:35:03Z
Producer                        : Adobe PDF Library 5.0
Creator                         : Adobe InDesign 2.0.1
Trapped                         : False
Page Count                      : 2
Creation Date                   : 2003:07:28 17:35:03Z
Mod Date                        : 2003:10:16 10:23:53-04:00
Metadata Date                   : 2003:10:16 10:23:53-04:00
Document ID                     : adobe:docid:indd:26b4bbb5-c2b4-11d7-9f44-b0940195b4a9
Version ID                      : 1
Rendition Class                 : proof:pdf
Rendition Of Document ID        : adobe:docid:indd:26b4bbb5-c2b4-11d7-9f44-b0940195b4a9
Rendition Of Version ID         : 1
Rendition Of Rendition Class    : default
Format                          : application/pdf
Title                           : pioneer_2kw.indd
Tagged PDF                      : Yes
EXIF Metadata provided by EXIF.tools
FCC ID Filing: OUSLU100AL

Navigation menu