UTC Fire and Security NX1700E Remote Control Security Device User Manual NX 1700E CARD READER
UTC Fire & Security B.V. Remote Control Security Device NX 1700E CARD READER
INSTALLATION GUIDE FOR NX1700E
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 279776 |
| Application ID | kzFlWOVug7d9d011Zd952g== |
| Document Description | INSTALLATION GUIDE FOR NX1700E |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 7.66kB (95804 bits) |
| Date Submitted | 2002-10-29 00:00:00 |
| Date Available | 2002-10-25 00:00:00 |
| Creation Date | 2002-10-25 15:37:27 |
| Producing Software | Acrobat Distiller 5.0 (Windows) |
| Document Lastmod | 2002-10-25 10:40:52 |
| Document Title | NX-1700E CARD READER |
| Document Creator | Pscript.dll Version 5.0 |
| Document Author: | 208036681 |
NX1700EIB02 (Supercedes NX1700EIA02) NetworX Series NX-1700E Proximity Card Reader Installation and Startup © 2002 GE Interlogix All rights reserved. Printed in the United States of America. These instructions do not purport to cover all details or variations in equipment nor to provide every possible contingency to be met during installation, operation, and maintenance. If further information is desired or if particular problems arise that are not covered sufficiently for the purchaser’s purpose, the matter should be referred to GE Interlogix, Gladewater, Texas, USA. This document contains proprietary information of GE Interlogix, USA and is furnished to its customer solely to assist that customer in the installation, testing, operations, and/or maintenance of the equipment described. This document shall not be reproduced in whole or in part nor shall its contents be disclosed to any third party without the written approval of GE Interlogix. Please refer to the current GE Interlogix product catalog for detailed warranty information. Main 800-727-2339 Outside the US 903-845-6941 Main Fax 903-845-6811 Web: www.caddx.com www.ge-interlogix.com Technical Support Tech Support Fax Sales & Literature 800-727-2339 903-845-8409 800-547-2556 NetworX is a trademark of the GE Interlogix companies. NX-1700E Card Reader TABLE OF CONTENTS I. GENERAL DESCRIPTION....................................................................................................................................... 5 II. WIRING DESCRIPTION ...................................................................................................................................... 5 III. INSTALLATION.................................................................................................................................................... 5 IV. ENROLLING .......................................................................................................................................................... 5 V. ADDRESSING ........................................................................................................................................................ 6 VI. PROGRAMMING .................................................................................................................................................. 6 A. B. C. VII. USING THE LED KEYPAD ..................................................................................................... 6 Entering the Program Mode ....................................................................................................... 6 Entering the Module Address ..................................................................................................... 6 Programming a Location............................................................................................................ 7 Exiting the Program Mode: ........................................................................................................ 7 USING THE LCD KEYPAD ..................................................................................................... 8 PROGRAMMING DATA TYPES............................................................................................. 8 ADDING/DELETING USER CARDS .................................................................................................................. 8 Adding One User ........................................................................................................................ 8 Adding User w/ Auto-Increment ................................................................................................. 9 Delete One User.......................................................................................................................... 9 VIII. PROGRAMMING LOCATIONS......................................................................................................................... 9 Location 0 Locations 1 - 240 Location 241 Location 242 Location 243 Location 244 Location 245 Programming the Scan Functions ..................................................................... 9 Serial Numbers Mapping User Cards to Users............................................... 10 Programming the X-10 Address for the Scan Functions................................. 10 Programming the Options and Reader Partition ............................................ 11 Programming the Door Prop Zone ................................................................. 11 Programming the Various Reader Timers ...................................................... 12 Resetting the Reader Address.......................................................................... 12 IX. PROGRAMMING WORKSHEETS................................................................................................................... 13 X. ORDERING INFORMATION ............................................................................................................................ 14 XI. FCC INFORMATION.......................................................................................................................................... 15 XII. SPECIFICATIONS............................................................................................................................................... 16 NX-1700E Card Reader Symbol Legend Warning Caution Indicates a procedure, practice, condition, or statement that, if not strictly observed, could result in personal injury. * This symbol indicates electrical warnings and cautions. Indicates a procedure, practice, condition, or statement that, if not strictly observed, could result in damage to or destruction of equipment or property. ** This symbol indicates general warnings and cautions. Indicates an essential or important procedure, instruction, condition, or statement. Note Indicates a user tip. Provides helpful information that is not normally defined in regular use, but from an experienced user. Indicates a key or button should be pressed to enter data. Tip Enter NX-1700E Card Reader I. GENERAL DESCRIPTION The NetworX NX-1700E is a proximity card reader / door control module used to expand the capabilities of the NetworX control panels. II. Microprocessor-controlled Includes one (1) low current trigger output, which can be used to control a door strike relay Up to 15 card readers can be connected to the NetworX control panel Can be programmed to control access in any or all partitions LEDs can be programmed to follow the output and/or the armed or ready status of the system Has an optional optical tamper switch WIRING DESCRIPTION DESCRIPTION Connect to the control panel DATA terminal. This wire is the data-signaling terminal to all the devices on the buss. Connect to the control panel COMMON terminal. Supplies the common side of the power to the card reader module. Connect to control panel AUX POWER + terminal. Supplies power to the card reader module. This is an optional (exit) EGRESS input. To use this feature, connect the normally open WHITE egress switch between this terminal and COM. If this feature is not used, there is no (EGRESS) need to connect this wire. This is an optional open-collector (negative trigger) OUTPUT. To use this feature, connect the coil contacts of a relay between this terminal and AUX POWER +. Absolute BLUE maximum 14 volts @ 25mA. (OUTPUT) This is a low current output and must not be used to directly energize high current door openers. GREEN (DATA) BLACK (COM) RED (POS) III. INSTALLATION To install the card reader, simply wire it into the system. Refer to the above wiring table for details. IV. ENROLLING The NetworX control panels have the ability to automatically find and store in memory the presence of all keypads, zone expanders, wireless receivers, output modules, and any other device on the keypad buss. This allows these devices to be supervised by the control panel. To enroll the devices, enter the Program Mode using the procedure outlined in the control panel Installation Manual. When the Program Mode is exited, the NX-8 control will automatically enroll the devices. The enrolling process takes about 12 seconds, during which time the Service LED will illuminate. User codes will not be accepted during the enrolling process. Once a module is enrolled, if it is not detected by the control, the Service LED will illuminate. NX-1700E Card Reader V. ADDRESSING Once the reader is wired into the system, the module needs to be addressed. Unlike most NetworX expanders, the address of any particular reader is determined by itself after installation is complete. Follow the procedures outlined under the section “PROGRAMMING”. When prompted to enter the module device number, a card must be scanned at the reader to initiate addressing (one short beep). When completed (1-2 seconds), the reader will beep back its address (long beeps): Scan: To “present” or pass a card or FOB within sensing range of the card reader module. Table V-1 Beeps VI. Address 113 114 115 116 117 118 119 120 Beeps 10 11 12 13 14 15 Address 121 122 123 124 125 126 127 PROGRAMMING A. USING THE LED KEYPAD ACTION RESULT ENTERING THE PROGRAM MODE [Go To Factory Default is Enters the Program Mode. Stay, Chime, Exit, Bypass & Cancel LEDS will flash. Program Code If the "Go To Program Code" is valid, the "Service" LED will flash and the 5 function LEDs will illuminate steady. You are now in the Program Mode and ready to select the module address. ENTERING THE MODULE ADDRESS Scan a card. (example only) The card reader will address itself. Enters the module address. Refer to Table V-1 on page 6 for the address assigned by the card reader module itself. The Armed LED will illuminate while it is waiting for a programming location to be entered. NX-1700E Card Reader ACTION RESULT PROGRAMMING A LOCATION If an attempt is made to program an invalid entry for a particular segment, the keypad sounder will emit a triple error beep (beep, beep, beep), and remain in that segment awaiting a valid entry. To Enter a Location: [location] # The Armed LED will flash. If the location is valid, the "Armed" LED will extinguish, the "Ready" LED will illuminate, and the zone LED’s will show the data for the first segment of this location. To Change Location Data: [changed data] The "Ready" LED will flash to indicate a data change in process and will continue until the data is saved. The new data is saved. The keypad will increment and display the next segment’s data. NOTE: Repeat these steps until the last segment is reached. To Exit a Location: # Exits from this location. The “Ready” LED will extinguish. The "Armed" LED will illuminate waiting for a new programming location to be entered. To Review The Data: [location] # Shortcuts: The Armed LED will flash. If the location number is valid, the "Armed" LED will extinguish, the "Ready" LED will illuminate, and the zone LEDs will show the binary data for the first segment of this location. (Do not enter data.) The next segment is displayed. Each time r is pressed, the data of the next segment will be displayed for review. Previous location. Same location. Next sequential location. EXITING THE PROGRAM MODE: EXIT EXIT NX-1700E Card Reader Exits this programming level. B. USING THE LCD KEYPAD All steps required for programming are the same as the aforementioned LED keypad. The LCD keypad display will prompt you for the data required. While in the programming mode, and not in a location, the number in parenthesis is the location you were previously changing. For example, if the display reads "Enter location, then # (5)", it is reminding you that location 5 was the last location you programmed. In feature selection data, the numbers of the enabled features will be displayed. The features not enabled will display a hyphen (-). C. PROGRAMMING DATA TYPES a) b) VII. Numerical Data Numerical data can take on values from 0-255 or 0-15 depending on the segment size. Feature Selection Feature selection data is used to turn features on or off. ADDING/DELETING USER CARDS Adding and deleting users is done through a combination of entering information at the keypad and scanning cards. Before a card can be entered, one reader on the system must be programmed with User Card Programming enabled (Location 242, Segment 1, Option 1, page 11). It is recommended that only one reader on the system be enabled to add/delete user cards and that this reader be located near a keypad. This reader will transfer information to all other readers in the system once programming is finished. Once a reader is enabled to add/delete users, it must be placed into one of the three following modes: 1) Add One User; 2) Add Multiple Users (or Add User w/ Auto-Increment), and 3) Delete One User. Adding and/or deleting users on a card reader is similar to modifying user codes at a keypad. MUST BE A MASTER USER IN ORDER TO ADD OR DELETE USERS. ACTION Accesses Code Programming [master code] Factory Default is RESULT if the control is an NX-4, NX-6, or NX-8 an NX-8E if the control is If the code is valid, the Ready LED will flash. User Number 2 is used to program user cards, so… Unit is now ready for you to choose one of the User Card Programming modes (as if user code 2): 1) 2) 3) Add One User Add Multiple Users (or Add User w/ AutoIncrement) Delete One User IMPORTANT NOTE Adding or deleting user cards from a reader causes the code for User Number 2 to become invalid. Therefore, it will need to be reentered after all user cards are programmed into the readers. ADDING ONE USER To add a single user, enter [STAY] followed by the 3-digit “user number” if control is programmed for 4digit user codes or followed by [0]-[0] and the 3-digit “user number” if control is programmed for 6-digit user codes. A total of 4 or 6 digits must be entered depending on the programming of the control panel; the first being the [STAY] key, the last three being the “user number”. If a valid user number is entered, NX-1700E Card Reader LED1 on any enabled readers will begin to flash. Scan the card designated for the entered user. If the user card is not already in the system, it will be added and mapped to the entered user number and LED1 will stop flashing. If the card is already in the system, the reader will triple beep and LED1 will continue flashing. After about 40 seconds, all the readers in the system will be updated with the new user card information. ADDING USER W/ AUTO-INCREMENT To add multiple users, enter [CANCEL] followed by the 3-digit “user number” of the first user to be entered if control is programmed for 4-digit user codes or followed by [0]-[0] and the 3-digit “user number” of the first user to be entered if control is programmed for 6-digit user codes. A total of 4 or 6 digits must be entered depending on the programming of the control panel; the first being the [CANCEL] key, the last three being the “user number” of the first user to be entered. If a valid user number is entered, LED1 on any enabled readers will begin to flash. Scan the card designated for the entered user. If the user card is not already in the system, it will be added and mapped to the entered user number and LED1 will continue flashing indicating that the next user card can be scanned for the next user number. If the card is already in the system, the reader will triple beep and LED1 will continue flashing; the user number is not incremented in this case. After about 40 seconds of no cards being scanned, all the readers in the system will be updated with the new user card information. DELETE ONE USER To delete a single user, enter [EXIT] followed by the 3-digit “user number” if control is programmed for 4-digit user codes or followed by [0]-[0] and the 3-digit “user number” if control is programmed for 6-digit user codes. A total of 4 or 6 digits must be entered depending on the programming of the control panel; the first being the [EXIT] key, the last three being the “user number”. If a valid user number is entered, LED1 on any enabled readers will begin to flash. Scan any card. The user card information for the entered user number will be cleared and LED1 will stop flashing. After about 40 seconds, all the readers in the system will be updated with the new user card information. VIII. If an individual keeps the card, it can still be deleted. PROGRAMMING LOCATIONS LOCATION 0 PROGRAMMING THE SCAN FUNCTIONS (3 segments of binary data) Location 0 is used to select the particular function(s) that are activated when a card is scanned. More than one function may be selected. If more than one function is selected, they will execute in order from function 1 to function 8. Segment 1 Single Scan Function Program the functions that are performed when a card is scanned once. LED 1 - "On" to send Code Entry function to the control panel. (Default is “On”) LED 2 - "On" to activate the Armed Away mode. LED 3 - "On" to activate the Armed Stay mode. LED 4 - "On" to send the Disarm function to the control panel. LED 5 - "On" to send Auxiliary Function #1 to the control panel. LED 6 - "On" to send Auxiliary Function #2 to the control panel. LED 7 - "On" to broadcast an X-10 function (see Location 241 for programming). LED 8 - "On" to activate the relay driver output. Segment 2 Double Scan Function Program the functions that are performed when a card is scanned twice within the 2 Scan Hold Time (Location 244, Segment 1). The descriptions of the options are the same as for Single Scan Function. (Default is 1) NX-1700E Card Reader Segment 3 Single Scan Hold Function Program the functions that are performed when a card is scanned and held at the reader for the duration of the 2 Scan Hold Time (Location 244, Segment 1). The descriptions of the options are the same as for Single Scan Function. (Default is 1) LOCATIONS 1 - 240 SERIAL NUMBERS MAPPING USER CARDS TO USERS (8 segments of hexadecimal data) DO NOT EDIT LOCATIONS 1- 240. YOU MAY LOSE THE ABILITY TO SCAN A CARD!! LOCATION 241 PROGRAMMING THE X-10 ADDRESS FOR THE SCAN FUNCTIONS (5 segments of numerical data) Segment 1 Program a number from 0-15 to represent the corresponding X-10 Module Number from the following table. (Default is 0) Module Seg 1 9 10 11 12 13 14 15 16 8 9 10 11 12 13 14 15 Segment 2 Program a number from 0-15 to represent the corresponding X-10 House code from the following table. (Default is 0) 0=A 1=B 2=C 3=D X-10 ADDRESS CODES 4=E 8=I 5=F 9=J 6=G 10=K 7=H 11=L 12=M 13=N 14=O 15=P Segment 3 Single Scan Function Program the X-10 function that is performed when a card is scanned once. This location only needs to be programmed if Location 0, Segment 1, Option 7 is set. Use the following table. (Default is 2) Function # Function performed All units off All lights on On Off Function # All others Function performed Dim Bright All lights off Reserved Segment 4 Double Scan Function Program the X-10 function that is performed when a card is scanned twice within the 2 Scan Hold Time (Location 244, Segment 1). The descriptions of the function codes are the same as for Single Scan Function. This location only needs to be programmed if Location 0, Segment 2, Option 7 is set. Use the above table. (Default is 3) Segment 5 Single Scan Hold Function Program the X-10 function that is performed when a card is scanned and held at the reader for the duration of the 2 Scan Hold Time (Location 244, Segment 1). The descriptions of the function codes are the same as for Single Scan Function. This location only needs to be programmed if Location 0, Segment 3, Option 7 is set. Use the above table. (Default is 2) 10 NX-1700E Card Reader LOCATION 242 PROGRAMMING THE OPTIONS AND READER PARTITION (4 segments of binary data) Segment 1 LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 - System Options: "On" if reader is enabled for User Card Programming. "On" if optical tamper is enabled. (Default is “On”) "On" if reader buzzer is to follow typical keypad buzzing. "On" if ding-dong chime enabled (dependent on option 3 and chime being enabled). “On” if relay driver function is to be logged as Code Entry. Reserved. Reserved. Reserved. Segment 2 LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 - LED1 (Green) Options: "On" to follow Ready status of system. (Default is “On”) "On" to toggle with the Relay Driver activation. (Default is “On”) "On" if inverted. Reserved. Reserved. Reserved. Reserved. Reserved. Segment 3 LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 - LED2 (Red) Options: "On" to follow Armed status of system. (Default is “On”) "On" to toggle with the Relay Driver activation. "On" if inverted. Reserved. Reserved. Reserved. Reserved. Reserved. Segment 4 LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 - Reader Partition: "On" if reader is in Partition 1. "On" if reader is in Partition 2. "On" if reader is in Partition 3. "On" if reader is in Partition 4. "On" if reader is in Partition 5. "On" if reader is in Partition 6. "On" if reader is in Partition 7. "On" if reader is in Partition 8. LOCATION 243 (Default is “On”) (Default is “On”) (Default is “On”) (Default is “On”) (Default is “On”) (Default is “On”) (Default is “On”) (Default is “On”) PROGRAMMING THE DOOR PROP ZONE (1 segment of numerical data) Enter the zone number that will be monitored for sounding the Door Prop Alarm. Program a 0 (default) to disable this function. See Location 244, Segment 3 for the length of time the zone is monitored before sounding the alarm. This location must be programmed with a valid zone in order for a Door Control Module, if installed, to work properly. (Default is 0) NX-1700E Card Reader 11 LOCATION 244 PROGRAMMING THE VARIOUS READER TIMERS (3 segment of numerical data) Segment 1 2 Scan Hold Time Enter the amount of time allowed for a double scan to be detected and the amount of time required to hold a card to activate the functions programmed in Location 0, Segments 2 and 3. This timer is timed in 1/100 second increments from 0 to 2.55 seconds. (Default is 75 = ¾ second). Segment 2 Relay Active Time Enter the amount of time the Relay Driver is energized once activated. This timer is timed in 1/10 second increments from 0 to 25.5 seconds. (Default is 50 = 5 seconds). Segment 3 Door Prop Time Enter the amount of time a monitored zone (see Location 243) must be faulted before sounding an alarm (local buzzer). This timer is timed in 1-second increments from 0 to 255 seconds. (Default is 10 = 10 seconds). LOCATION 245 RESETTING THE READER ADDRESS (1 segment of numerical data) If it is necessary to reset the address of the reader, enter a 0 in this location. This will cause the reader to cease functioning. If a card is scanned with the system in Program Mode, the reader will again find an available address and set itself, beeping back to the user the address that was found as per the table on page 6. If the system is not in Program Mode and a card is scanned at a reader with a reset address, then it will sound an error beep. 12 NX-1700E Card Reader IX. PROGRAMMING WORKSHEETS LOC PG 1240 241 10 10 DESCRIPTION SINGLE SCAN FUNCTION Seg Single Scan Function Double Scan Function Single Scan Hold Function Card Serial Numbers Do not edit these locations! X-10 ADDRESS Seg Module Number House Code X-10 ADDRESS CODES 0=A 4=E 8=I 12=M 1=B 5=F 9=J 13=N 2=C 6=G 10=K 14=O 3=D 7=H 11=L 242 11 0 0 0 0 0 0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 000000 00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 4=Dim 5=Bright 6=All lights off Other=Reserved Double Scan Function Single Scan Hold Function OPTIONS AND READER PARTITION Segment 1 – System Options 1= "On" if enabled for User Card Programming 2= "On" if optical tamper enabled 3= "On" if buzzer follows keypad buzzing 4= "On" if ding-dong chime enabled (Opt 3 & chime must be enabled) 5= “On” if relay driver function logs as Code Entry 6= Reserved 7= Reserved 8= Reserved Segment 2 – LED1 (Green) Options 1= "On" follows system Ready status 2= "On" to toggle with the Relay Driver 3= "On" if inverted 4= Reserved 5= Reserved 6= Reserved 7= Reserved 8= Reserved Segment 3 – LED2 (Red) Options 1= "On" follows system Armed status 2= "On" to toggle with the Relay Driver 3= "On" if inverted 4= Reserved 5= Reserved 6= Reserved 7= Reserved 8= Reserved NX-1700E Card Reader DATA 15=P Single Scan Function 0=All units off 1=All lights on 2=On 3=Off DEFAULT 1,2 13 LOC PG 243 244 11 12 245 X. 12 DESCRIPTION Segment 4 – Reader Partition 1= "On" if reader is in Partition 1 2= "On" if reader is in Partition 2 3= "On" if reader is in Partition 3 4= "On" if reader is in Partition 4 5= "On" if reader is in Partition 5 6= "On" if reader is in Partition 6 7= "On" if reader is in Partition 7 8= "On" if reader is in Partition 8 DOOR PROP ZONE Seg 2 Scan Hold Time (1/100 seconds) Relay Active Time (1/10 seconds) Door Prop Time (seconds) RESET THE READER ADDRESS Entering a “0” will reset and cause the reader to cease functioning. DEFAULT 1,2,3,4,5,6,7,8 DATA 0 = Disabled 75 = 3/4 second 50 = 5 seconds 10 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0= 0 0 0 0 0 0 0 0 010 0 0 0 0 0 0 0 0 0 0 0 0 0 0 seconds 00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0 0 0 0 0 0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 ORDERING INFORMATION PART # NX-1700E NX-8E NX-8E-KIT DESCRIPTION Card Reader Module 8 – 192 Zone Control Only NX-8E Control, NX-108E LED Keypad, 40VA Transformer 8 – 48 Zone Control Only NX-8 Control, NX-108E LED Keypad, 40VA Transformer 6 – 12 Zone Control Only NX-6 Control, NX-108E LED Keypad, 40VA Transformer 4 Zone Control Only PART # NX-108E NX-116E NX-124E DESCRIPTION 8 Zone LED Keypad 16 Zone LED Keypad 24 Zone LED Keypad NX-148E NX-1192E Alphanumeric LCD Keypad 192 Zone LCD Keypad NX-1208E NX-1248E 8 Zone LED Keypad 48 Zone LCD Keypad NX-1308E 8 Zone LED Door Design Keypad NX-1316E 16 Zone LED Door Design Keypad NX-216E NX-4 Control, NX-108E LED Keypad, 40VA Transformer 16 Zone Expander Module NX-1324E 24 Zone LED Door Design Keypad NX-320E Smart Power Supply and Buss Extender NX-1448E 48 Zone Fixed Language Icon Keypad NX-408E 8 Zone Wireless Expansion Module NX507E Seven Relay Module NX-416E 16 Zone Wireless Expansion Module NX-508E Eight Output Module NX-448E 48 Zone Wireless Expansion Module NX-8 NX-8-KIT NX-6 NX-6-KIT NX-4 NX-4-KIT 14 NX-534E Two-Way Listen In Module NX-540 "Operator II" Telephone Interface NX-591E Cellemetry Interface NX-1700E Card Reader XI. FCC INFORMATION This device complies with Part 15 of the FCC rules. Operation is subject to the following three conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. 3. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC ID: CGGNX-1700E NOTES NX-1700E Card Reader 15 XII. SPECIFICATIONS DIMENSIONS Approx. 1.5"W x 4.5"L x 1"D with 6’ cable OPERATING POWER 12 VDC, Supplied by NX-4, NX-6, NX-8, NX-8E, or NX-320E CURRENT DRAW 40mA 110mA Standby with Green LED Maximum OPERATING TEMPERATURE 32 to 120 degrees F SHIPPING WEIGHT < 1 lb. GE INTERLOGIX 1420 N. MAIN STREET GLADEWATER, TEXAS 75647 Main Outside the US Main Fax 800-727-2339 903-845-6941 903-845-6811 Technical Support Tech Support Fax Sales & Literature 800-727-2339 903-845-8409 800-547-2556 Revision B (October 2002) 16 NX-1700E Card Reader
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Encryption : Standard V1.2 (40-bit) User Access : Print, Copy, Annotate, Fill forms, Extract, Assemble, Print high-res Create Date : 2002:10:25 15:37:27Z Modify Date : 2002:10:25 10:40:52-04:00 Subject : INSTALLATION MANUAL (REV B - OCT 2002) Page Count : 16 Creation Date : 2002:10:25 15:37:27Z Mod Date : 2002:10:25 10:40:52-04:00 Producer : Acrobat Distiller 5.0 (Windows) Author : 208036681 Metadata Date : 2002:10:25 10:40:52-04:00 Creator : 208036681 Title : NX-1700E CARD READER Description : INSTALLATION MANUAL (REV B - OCT 2002)EXIF Metadata provided by EXIF.tools