Ubiquiti L2 802.11 radio User Manual user guide

Ubiquiti Networks, Inc. 802.11 radio user guide

User Manual

L2OEM Users Guide
TECH SPECSDataRate TX Power Tolerance DataRate Sensitivity Tolerance1Mbps 20 dBm +/-1dB 1Mbps -95 dBm +/-1dB2Mbps 20 dBm +/-1dB 2Mbps -94 dBm +/-1dB5.5Mbps 20 dBm +/-1dB 5.5Mbps -93 dBm +/-1dB11Mbps 20 dBm +/-1dB 11Mbps -90 dBm +/-1dB6Mbps 20 dBm +/-1dB 6Mbps -92 dBm +/-1dB9Mbps 20 dBm +/-1dB 9Mbps -91 dBm +/-1dB12Mbps 20 dBm +/-1dB 12Mbps -89 dBm +/-1dB18Mbps 20 dBm +/-1dB 18Mbps -88 dBm +/-1dB24Mbps 20 dBm +/-1dB 24Mbps -84 dBm +/-1dB36Mbps 18 dBm +/-1dB 36Mbps -81 dBm +/-1dB48Mbps 16 dBm +/-1dB 48Mbps -75 dBm +/-1dB54Mbps 15 dBm +/-1dB 54Mbps -72 dBm +/-1dB802.11b802.11g OFDM802.11g OFDMTX SPECIFICATIONSRX SPECIFICATIONSWireless ApprovalsFCC Part 15.247, IC RS210, CERADIO OPERATING FREQUENCY 2412-2462 MHz802.11bREGULATORY / COMPLIANCE INFORMATIONSYSTEM INFORMATIONProcessor SpecsAtheros MIPS 4KC, 180MHzMemory Information16MB SDRAM, 4MB FlashNetworking Interface1 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet InterfaceRoHS ComplianceYESPHYSICAL / ELECTRICAL / ENVIRONMENTALEnclosure Size16.3 cm. length x 3.1 cm. height x 8cm. widthWeight0.18kgEnclosure CharacteristicsOutdoor UV Stabalized Plastic Mounting KitPole Mounting Kit includedMax Power Consumption4 WattsPower Supply12V, 1A (12 Watts). Supply and injector includedShock and VibrationETSI300-019-1.4Power MethodPassive Power over Ethernet (pairs 4,5+; 7,8 return)Operating Temperature -20C to +70COperating Humidity5 to 95% Condensing
COMPLIANCE INFORMATION FCC Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. ! The antennas used for this transmitter must be installed to provide a separation distance of at least following from all users:20cm! INDUSTRY CANADAThis Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à! la norme NMB-003 du Canada. ! Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. !! To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication.! The device has been designed to operate with the antennas listed below and having a maximum gain of 8dBi. Antennas not included in this list or having a gain greater than 8dBi are strictly prohibited for use with this device. The required antenna impedance is 50 ohms.This device must be professionally installed and is designed strictly for for outdoor point-to-point wireless links.

Navigation menu