Ubiquiti L2 802.11 radio User Manual user guide
Ubiquiti Networks, Inc. 802.11 radio user guide
Ubiquiti >
User Manual
L2 OEM Users Guide TECH SPECS SYSTEM INFORMATION Processor Specs Memory Information Networking Interface Atheros MIPS 4KC, 180MHz 16MB SDRAM, 4MB Flash 1 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface REGULATORY / COMPLIANCE INFORMATION FCC Part 15.247, IC RS210, CE YES Tolerance +/-1dB +/-1dB +/-1dB +/-1dB 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps +/-1dB +/-1dB +/-1dB +/-1dB +/-1dB +/-1dB +/-1dB +/-1dB 802.11b RADIO OPERATING FREQUENCY 2412-2462 MHz TX SPECIFICATIONS RX SPECIFICATIONS DataRate TX Power Tolerance DataRate Sensitivity 1Mbps 20 dBm +/-1dB 1Mbps -95 dBm 2Mbps 20 dBm +/-1dB 2Mbps -94 dBm 5.5Mbps 20 dBm +/-1dB 5.5Mbps -93 dBm 11Mbps 20 dBm +/-1dB 11Mbps -90 dBm Enclosure Size Weight Enclosure Characteristics Mounting Kit Max Power Consumption Power Supply Power Method Operating Temperature Operating Humidity Shock and Vibration 20 20 20 20 20 18 16 15 dBm dBm dBm dBm dBm dBm dBm dBm +/-1dB 6Mbps -92 +/-1dB 9Mbps -91 +/-1dB 12Mbps -89 +/-1dB 18Mbps -88 +/-1dB 24Mbps -84 +/-1dB 36Mbps -81 +/-1dB 48Mbps -75 +/-1dB 54Mbps -72 PHYSICAL / ELECTRICAL / ENVIRONMENTAL 16.3 cm. length x 3.1 802.11g OFDM 802.11g OFDM 802.11b Wireless Approvals RoHS Compliance dBm dBm dBm dBm dBm dBm dBm dBm cm. height x 8cm. width 0.18kg Outdoor UV Stabalized Plastic Pole Mounting Kit included 4 Watts 12V, 1A (12 Watts). Supply and injector included Passive Power over Ethernet (pairs 4,5+; 7,8 return) -20C to +70C 5 to 95% Condensing ETSI300-019-1.4 COMPLIANCE INFORMATION FCC Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. The antennas used for this transmitter must be installed to provide a separation distance of at least following from all users: 20cm INDUSTRY CANADA This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication. The device has been designed to operate with the antennas listed below and having a maximum gain of 8dBi. Antennas not included in this list or having a gain greater than 8dBi are strictly prohibited for use with this device. The required antenna impedance is 50 ohms. This device must be professionally installed and is designed strictly for for outdoor pointto-point wireless links.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf Linearized : No Page Count : 3 PDF Version : 1.4 Title : user guide Author : Robert Pera Subject : Apple Keywords : Creator : OmniGraffle Professional Producer : Mac OS X 10.5.8 Quartz PDFContext Create Date : 2010:07:16 05:56:24Z Modify Date : 2010:07:16 05:56:24ZEXIF Metadata provided by EXIF.tools