Ubiquiti LBE5ACG2 LBE-5AC-Gen2, LBE-5AC-Omni-Gen2 User Manual LiteBeam LBE 5AC Gen2 Quick Start Guide

Ubiquiti Networks, Inc. LBE-5AC-Gen2, LBE-5AC-Omni-Gen2 LiteBeam LBE 5AC Gen2 Quick Start Guide

Quick Start Guide_Part 1

5 GHz airMAX® ac Radio with InnerFeed® TechnologyModel: LBE-5AC-Gen2
IntroductionThank you for purchasing the Ubiquiti Networks® LiteBeam®5AC Gen 2 radio. This Quick Start Guide is designed to guide you through installation and also includes warrantyterms.Package Contents Antenna Feed Center Reflector PanelSide Reflector Panels (Qty. 2)Feed Receiver Azimuth Mount Elevation Mount Metal StrapKnob Kit Gigabit PoE (24V, 0.3A) with Mounting BracketPower Cord Quick Start GuideProducts may be different from pictures and are subject to change without notice. TERMS OF USE: Ubiquiti radio devices must be professionally installed. Shielded Ethernet cable and earth grounding must be used as conditions of product warranty. TOUGHCable™ is designed for outdoor installations. It is the customer’s responsibility to follow local country regulations, including operation within legal frequency channels, output power, and Dynamic Frequency Selection (DFS) requirements.
Installation Requirements• 7 mm socket wrench or screwdriver• Shielded Category 5 (or above) cabling should be used for all wired Ethernet connections and should be grounded through the AC ground of the PoE.We recommend that you protect your networks from harmful outdoor environments and destructive ESD events with industrial‑grade, shielded Ethernet cable from Ubiquiti Networks. For more details, visit www.ubnt.com/toughcableApplication ExamplesThe LiteBeam AC mounted outdoors with the reflector installed provides directional outdoor coverage (gain reflector‑dependent).The LiteBeam AC mounted outdoors without the reflector installed provides outdoor‑to‑indoor coverage using the 3 dBi Antenna Feed only.
Hardware OverviewBottom ViewAntenna FeedReector AssemblyFeed ReceiverElevation MountAzimuth MountTechnologyReset ButtonSecuring ArmsPort CoverEthernet PortLEDs
LEDsEthernet The LED will light steady blue when an active Ethernet connection is made and flash when there is activity.Power The LED will light blue when the device is connected to a power source.ButtonReset To reset to factory defaults, press and hold the Reset button for more than 10 seconds while the LiteBeamAC is poweredon. The LiteBeam AC may also be reset remotely using the auxiliary Reset button located on the bottom of the Gigabit PoEadapter.PortEthernet Supports 10/100/1000 connections and passive PoE. This port should be connected to the LAN and DHCP server.

Navigation menu