Ubiquiti WS5 Long-Range 5GHz Station User Manual
Ubiquiti Networks, Inc. Long-Range 5GHz Station
Ubiquiti >
User Manual
Ubiquiti Networks, Inc. 778 N. First St. San Jose, CA 95112 (408)-385-1103 WS5 MANUAL MODULAR USAGE The WS5 hi-power mini-PCI 802.11a radio card module has been specifically designed for use in outdoor wireless applications where additional link gain is critical. It is compatible with existing Atheros linux drivers and is capable of operation in the 5725-5850 MHz frequency range. Power and frequency limits are hard programmed into the radio card EEPROM, but card compatibility can be achieved with any Atheros Linux based software. It is necessary that the system integrators perform all applicable retesting and certification for their final system configurations. EXAMPLE OEM SYSTEM USAGE 802.11a Long-Range 5GHz Station PC ENGINES WRAP Wireless Router Board Pac Wireless Roo Tenna Antenna/Enclosure Software Driver ATHEROS PUBLIC MADWIFI Driver WS 5 WS5 IMPORTANT MODULAR APPROVAL INFORMATION This device is intended only form OEM integrator under the following conditions: 1) The antenna must be installed such that 86.2 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. IMPORTANT NOTE: In the event that these conditions cannot be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling This transmitter module is authorized only for use in devices where the antenna may be installed such that 86.2 cm may be maintained between the antenna and users (for example access points, routers, wireless ADSL modems, and similar equipment). The final end product must be labeled in visible area with the following: “Contains TX FCC ID SWX-WS5: End Product Manual Information The user manual for end users must include the following information in a prominent location “IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 86.2 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.” WS5 IMPORTANT OPERATION INFORMATION FCC Notice to Users and Operators NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Safety Information 86.2 cm
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Create Date : 2005:05:25 15:26:13-07:00 Creator : OmniGraffle Pro Modify Date : 2011:05:10 14:01:09-07:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Producer : Mac OS X 10.3.3 Quartz PDFContext Creator Tool : OmniGraffle Pro Metadata Date : 2011:05:10 14:01:09-07:00 Document ID : uuid:71d46532-cd6c-11d9-893e-000a95a4d1e0 Instance ID : uuid:d9ce66a1-feac-4181-8aee-692ff7ef9d9c Format : application/pdf Page Count : 3EXIF Metadata provided by EXIF.tools