UniData Communication Systems SQ-3500 VoIP Phone User Manual Microsoft PowerPoint SQ 3500 Manual G

UniData Communication Systems Inc. VoIP Phone Microsoft PowerPoint SQ 3500 Manual G

Contents

users manual

User ManualThis manual includes product specifications and instructions for SQ-3500 phone operation. This manual must be read before operating the product. The SQ-3500 phone access point is required to use this product. Usage of the SQ-3500 access point provided in the full package is recommended.
Safety PrecautionsDo not put the SQ-3500 in heating appliances such as heaters and microwave ovens to dry it if the device is wet. This can cause explosions, deformation, or other problems. If this occurs, free services shall not be provided.Do not use the SQ-3500 in places that are too hot or too wet (keep it indoors between 0 ℃and + 50 ℃). If the device gets wet with rain, or through spilled beverages, or is used in extremely hot/wet places such as public saunas, it can cause battery explosions.Be careful that conductors such as necklaces, keys, and coins not to contact battery terminals (the metal section). Since short circuits can cause explosions, be careful to prevent this. Keep the SQ-3500 and chargers out of the reach of children or pets. Batteries in the mouth, or using broken batteries, can hurt or cause electric shocks. Be sure to only use the designated batteries and accessories for the SQ-3500 provided by our company. If you use unauthorized batteries or accessories, it can reduce the life of the SQ-3500, cause explosions, or damage. If this occurs free servicing is avoid .Correctly install the SQ-3500 in compliance with instructions.Otherwise, abnormal operation of  the SQ-3500, or a reduction in its life span may occur. Record and keep the information contained in the SQ-3500 separately. Since important information stored in the SQ-3500 can be removed due to unavoidable circumstances such as user carelessness, maintenance, and product upgrades, please keep a record of important information. Take note that the manufacturer will not take responsibility for any damage from the loss of information.Never push the power button when the SQ-3500 is wet, and do not touch the SQ-3500, charger, or power cords with wet hands. This can cause fires or electric shocks. The SQ-3500 is not water-resistant. Keep it dryDo not use chemical detergents such as benzene, thinners, and alcohol to clean the SQ-3500. This can cause fires. 1
Safety PrecautionsDo not hold the SQ-3500 to your ears to turn on the power. This can cause hearing impairments or physical injuries. Do not look at the infrared window in a direct way when using the remote control. this can cause visual impairment.Refrain from the use of SQ-3500, and leave the power cord for the charger unplugged when it is thundering and flashed lightning. Thunderbolts can cause severe physical injuries or fires. Do not disassemble the SQ-3500 temporarily, or apply shocks to device. If  the device is damaged when you disassemble it, or inflict shocks on the device, it causes electric shocks, electric leakage or fires. 2
IndexSafety Precautions………………………………………………………………………………...............................................1Basic Components...…………………………………………………………………………………………….….…...…………4Battery Replacement….…………………………………………………………………………………….......….……………...5Time Taking to Charge / Battery Life………………………………………………………………………….………………….6Inserting / Removing a micro SD card…..…………………………………………………………………….…………………8Power On/Off………………………………………………………………………………………..............................................10Names & Function of Device Parts………………………………………………………………………………………………11Display Indicators…………………………………………………………………………………………………………………..12Calling Method………………………………………………………………………………………………………………………13Phone Book………………………………………………………………………………………………………………………….20Messaging……………………………………………………………………………………………………………………………27Display………………………………………………………………………………………………………………………………..28Sound…………………………………………………………………………………………………………………………………29Tools…………………………………………………………………………………………………………………………………..30Logs……………………………………………………….………………………………………………………..………………...31System Settings…………………………….……………………………………………………………………..………………..323
Basic ComponentsPhone Cradle Battery Manual AdapterThe Basic Components as shown below may be different from the original.For safety in use, please purchase authentic products. If you want to purchase additional batteries or chargers, contact your dealer. 4
CAUTIONRISK OF EXPLOSION IF A BATTERY IS REPLACED WITH AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.Battery ReplacementUse only batteries authorized by the company when you replace batteries, following the diagram below.Battery installation method Battery removalIf the battery is inserted upside down, the SQ-3500 phone will not work. Please turn off the power before removing the battery from the SQ-3500 phone.(a sudden power off can cause problems)Battery Replacement5①②③ ①②
Charge the batteryCharge the battery after purchasing the product as it is not fully charged.Charging with the desktop charger※Lamp on the charger flickers? Separate the battery from the charger, and then re-fits into the charger. It is still flickering? Then, cleans the charging terminal and charge the battery. (When the lamp doesn’t stop flickering, apply to the dealer.)Features Charging Charging CompleteCharging Lamp RED GREENTime Taking to Charge / Battery Life6
Time Taking to Charge / Battery Life※Battery life varies with the environment temperature, battery age and movement of the user. -Battery life is not permanentModel Standard ModelCharging time 3 hours 30 minutesBattery life (continuous calling)Voice 6 hoursVideo 3 hoursTime Taking to Charge / Battery LifeThe successive use time and standby time of batteries are the estimates of the company’s laboratory, which can vary from the figures in the manual depending on the patterns used7
Inserting the micro SD cardInserting / Removing the Micro SD cardUse Only compatible micro SD cards approved by UniData for use with this device. UniData uses approved industry standards for memory cards, but some brands may not be fully compatible with this device. Incompatible cards may damage the card, the device and corrupt data stored on the card.The phone supports micro SD cards up to 8GB.1.Open the side cover of the micro SD slot.2. Insert the card into the micro SD card slot with the contact surface facing down, and press it until it locks into place.3. Close the side cover. Remove the micro SD card1. Make sure that no application is currently accessing the micro SD memory card.2. Open the side cover of the micro SD slot.3. Press the micro SD card slightly in to release lock, and pull the card out.Important: Do not remove the memory card in the middle of an operation when the card is being accessed. Removing the card in the middle of an operation may damage the memory card as well as the device, and data stored on thecard may be corrupted. You can remove or replace the micro SD card during phone operation without switching the device off.8
If you want to turn on the power,keep pressing          for 3 seconds or more. If you want to turn off the power, keep pressing          for 3 seconds or more.If anything abnormal takes place, or if the power button does not work while using a Wi-Fi phone, start the phone after removing and inserting the battery. Turn on the power after waiting for 5 seconds or more when you restart the phonePower On / Off9
Names & Function of Device Parts1 Send KeyUsed for receiving and makingcalls6 Left Selection Key7 Right Selection Key2 End KeyUsed to end a call and to switch the power ON/OFF8 Mute Shortcut9 AP Search Key10 Alarm Shortcut11 Using Message function3 Clear KeyRemoving characters or moving to previous screen.12 Calendar13 Using user-defined function14 Volume Control4 Vibration shortcutPress and hold to vibrate15 MIC16 Micro SD Insert hole5 Key LockLock and unlock the keypad.17 Earphone18 Earpiece19 Speaker20 Front Camera21 Back Camera10211914
Signal strengthOut of call coverage areaCall trial or connectionCall not availableYou have selected the sound settingMute button, displayed when the volume is set to “0”Vibration ModeSilent ModeAn Alarm is setYou have one or more unread messages in the Inbox folderSetting to call forwarding serviceRemaining battery lifeFull                Low                 EmptyConnecting  to networkShows that the keys are locked. Key operation is disabledMicro SD card is being accessed Display Indicators 11
Voice CallsCall ConnectIn standby, enter the numeric keys and then press the            key※Call quality may be reduced at increased distance away from the access point.Calling Method12
Call connectIn standby, enter the numeric keys and then press              .※Call quality may be reduced at increased distance away from the access point.Calling MethodVideo Calls13
Redialing recently used numbersYou can make voice or video calls by dialing recently used numbers (incoming, outgoing, missed, received/sent text messages). During stand-by, press the SEND key and then select the phone number you want to call. - Select VIDEO in the menu if you want to make a video call.Speed dialingYou can speed dial saved numbers to make calls quickly and easily.During stand-by, press the speed dial number and then press the SEND key to make a call. - Press the VIDEO key to make a video call.Calling MethodCall logs14
Number KeyAuto-searchPress a part of the number you want to call to auto-search the phonebook and display the results. Select a phone number and press the OK key. - Press the VIDEO key to make a video call.Calling Method15
Making a voice call•Refer to page 12.Taking a voice callPress the SEND key to take an incoming call.Press the END key to reject an incoming call.Using the menu during a voice callConvert to video call: Convert the current voice call to a video call without ending the call.Contacts: Search the phone book.Send message: Send a message during a call without ending it.Memo: Write and save a message during a call.16Using the Menu During a Voice Call
Making a video call•Refer to page 13.Taking a video callPress the SEND key when the message “Incoming video call” is displayed.Press the END key to reject the incoming call.Using the menu during a video callChange Camera: To converts the current video preview to back or front  camera sight.Preview Off: Off the preview.Mute: This function stops your caller from hearing your voice temporarily. The caller's voice can still be heard.View my picture: Turns off your picture and displays your caller's picture only. (Changes to 'Hide my picture' when your picture is in display.)Using the Menu During a Video Call17
If you have a missed call, press         , and the last one of those calls will be answered. To see calls that have arrived in your absence from the call list, press           or use the Left selection key         Menu) > Logs > Call historyMissed call18
Call Transfer / Hold / Waiting19Transferring a call When you are on a call, you can announce that you are transferring an active call to another party, or you can directly transfer the call.1. Press the            to put the call on HOLD.2. Dial the 3rd party numbers and place a new call3. Select the left selection key       (Menu > Transfer)While 3rd party is connected to execute transfer function.Call WaitingWhen you are on a call, an alert message to indicate that you have received a second call.Press          to answer the incoming call. If you want to switch between calls, press
Right select key       for shortcutLeft selection key       ( Menu > Contacts > Search contacts )Enter a part of a name, phone number or e-mail address to search for a phone number.Search all: Search by a part (more than 1 character) of a name, phone number or e-mail address. Search by letter or digits: Enter letters or digits, then all names starting with these letters/digits will be displayed..Search by group: Select a group to search in (unspecified, standard groups, custom groups).Shortcut key search: Enter a set shortcut number to search for a phone number.Enter the name of the person you want to call and press the View  key to call a number saved in the phone book.Press the (       ) key to edit the saved details.Press the ( Send ) key to call a found number.You can search for phone numbers just by pressing ‘Search’in stand-by mode. If you want to call the phone number selected, press .Phone Book20
2. Phone number search – video call1. Press the         to  make a video call from the phone book you have selected.- The phone number selected must be compatible with video calling.- A video call will be converted to a voice call if the dialed number does not support video calling or if the video call receiver is in an area where video calls cannot be made.3. Add new contacts – from phonebook1. Press       and select > Add contacts on the Phone Book Menu.Phone Book1. Phone Number Search - Menu (for a saved number)21
4. Phone Number Search - DeletePress          and select  > Delete from Phone Book menu.Delete the selected number.5. Phone Number Search – Delete AllPress          and select  > Delete all from Phonebook menu.Press ‘Yes’ after entering the password to delete all saved numbers.- Take note that if you select  Delete All, all stored phone numbers will be deleted.Check again before deleting as deleted phone numbers cannot be recovered.Phone Book1. Phone Number Search - Menu (for a saved phone number)22
Image Save a picture. (Press and select)Name Save a name. (Up to 16 alphabet characters)Group Assign a group.Use direction key  to assign  the group.Phone Number Save a phone number.Select a main phone number and phone number type.Press the shortcut key to assign a speed dial number.Add number Add a new number.Up to 5 phone numbers can be saved.(Select an icon and press OK to save)E-Mail Address Save an e-mail address.Messenger Save messenger details.Ringtone Assign a ring tone.Birthday Save a birthday. (Can be saved on the scheduler)Memo Save a memo.Up to 34 Korean characters and 65 alphabet characters can be saved.2. Add new contacts (          Menu > Contacts > Add contacts )Add a new phone number and other details.Up to 1,000 phone numbers can be saved.※Each type of phone number can be selected. If more than 2 phone numbers are to be saved, one phone number must be selected as the main phone number.Phone Book23
You can add new number in standby mode.Dial a phone number and press SAVE during stand-by to save phone numbers.Phone Book24
3. To set speed dial, select         ( Menu > Contacts > Speed dial )Set speed dial numbers for phone numbers saved in the phone book that are frequently called (up to 99 speed dial numbers can be saved).1. Select a speed dial number and press SET.2. Search for a phone number in the phone book.3. Select a phone number and press SELECT to complete the setting.View Speed Dial Number List: Displays a list of saved speed dial numbers.Clear All: Clears all saved speed dial numbers.※Select a speed dial number and press         to make a call.Phone Book> Move: Moves a phone number to a different speed dial number. : Clears an assigned speed dial number.Phone Book25
Group Settings ( Menu > Contacts > Group Settings )+ Edit a group to assign a phone number or add a new group.Select a group to edit and change the group name and ring tone.Up to 30 groups can be set.Group name: Enter a group name (12 Korean characters, 24 alphabet characters)Group ring tone: Assign a ring tone to a group.※Incoming call from a phone number assigned to a group will sound the selected  ring tone. However, the group ring tone will be ignored if another ring tone is assigned in the phone book.Phone Book26
In messaging, you can read, write and send messages. The messaging service can only be used if it is supported by your network or service providerLeft selection key ( Menu > Messaging ) or press the shortcut key Inbox – All the incoming messages are stored in  the <Inbox> folder with detailed  date, time and sender of each message shown.You can use <menu> to  reply, forward, save number, save in saved box and delete the selected message or delete all messagesin the InboxOutbox – Outbox is the place where the messages sent out are saved. The time the message was sent out and the receiver information is shownDraft – Draft is the place where the messages in process are kept. A message is put in the <Draft> folder when you saved the text you just       keyed into the message  and it is kept in the Draft folder until sent out.MessagingMessaging foldersCreate a text messageSelect Menu > Messaging > New message1.Enter the message.2.To add symbol and emoticon during writing a text, select menu3.To add recipients, scroll to the To: field, and enter the recipient’s number or select  Search to add recipients from the available options.You can add recipients up to 20 recipients.27
Display settings Select the left selection        Menu > DisplayThere are  4 options included in Display SettingsDisplayWallpaperSelect Menu > Display > WallpaperThis feature enables you to set a picture as a wallpaper image in your phone’s stand -by screen. There are fifteen built-in pictures for you to change the background image ScreenTo define the clock type of the time format in stand-by screen, Select Menu > Display > ScreenBannerTo select the type of the banner as a phone number or greeting in your phone’s stand-by screen Select Menu > Display > Banner  > Set banner > Greeting, Select Menu > Display > Banner  > Set banner > Input textThis option enables you to set welcome as a greeting to be displayed in your phone’s stand-by screen. To change the Greeting text, Select Menu > Display > Banner  > Edit Input textBrightnessTo set time to dim the display Select Menu > Display > Brightness > LCD backlight28
Bell settings Select left selection        Menu > Sound settings > Bell to change the type of the bell Sound SettingsBell modeSelect menu > Sound settings > Bell mode to choose  how the phone notifies you of an incoming voice  call.The alert type  allows you to choose between Ringing(Ringtone), Vibrating and Silent.VolumesTo adjust volumes of  Ring, Speaker, Handset and Headset.Select menu > Sound settings > VolumesManner ModeSelect menu > Sound settings > Manner mode to choose vibrating the phone notifies you of an incoming voice call and silent key tone and alarm.29
AlarmTo set an alarm, Select left selection        Menu > Tools > Alarm > Speed alarm.When an alarm is activated, the alarm indicator will be displayed. To dismiss the alarm and return to standby mode, press <CRL> or  <Right selection Key         > ToolsUnit converterTo convert unit  to different unit, Select menu > Tools > Unit converterFrom this submenu you can use unit converter of Length, Weight, Width, Bulk and Temperature.CalendarTo view the calendar, Select menu > Tools > Calendar30
Select left selection        Menu > Logs > Call historyLog information about the communication history of the device. The device registers missed , received calls and SMS history up to 100. To move to another tab press the <CRL> then use the <direction Key>Clogs infoTo view the total number of calls, Select Menu > Logs > Clogs infoLogsSMS infoTo view the total number of messages, Select menu > logs > SMS infoContacts infoTo view the total number of contacts registered, speed dials and groups, Select Menu > logs > Contacts infoCall time hist.To view the total time of outgoing and incoming calls, Select Menu > logs > Call time hist.31
Press the shortcut key       to set  to Wi-FiLeft selection key (      Menu) > Setting > Wi-Fi ) SettingsWi-Fi Settings.If you select Wi-Fi, the following display will appear:1. Display registered Wi-Fi profile  (Top)• If there is no registered Wi-Fi, a default profile will appear- SayviewNet is a default profile.- SQ-3500 can be registered Wi-Fi up to 4- Default Profile 1 + Registered from User  32. Display scanned AP list. (Bottom)• Display strength signal  and SSID of scanned AP • Hidden AP will not display32
WLAN SettingsWi-Fi Settings.There are 3 ways to register an AP1.Add profile from MenuSelect          menu > Profile add SSID setting : Enter SSID nameSecurity setting : You can configure security to use.Networking setting : You can set Network DHCP or manually2.Add profile from AP list Select         add SSID setting : SSID will set  automatically.Security setting : You can configure the security to useNetworking setting : You can set Network DHCP or manually3.Add profile as TemporarySelect  OK or TempSecurity setting : You can configure the security to useNetworking setting: You can set the Network DHCP manually    Wi-Fi Menu lists• Refresh: Refresh the scanned AP• Detail: Detail information of selected AP• Profile add: Add new profile. • Delete: Delete selected item ( It displays on the menu when you select the registered AP list )• View registered: See registered Access Point ( It displays on the menu when you select the registered AP list )• Change touch: It shows the Access Point that you searched as icons. And you can drag the icon to connect access point.33If you add a profile as <Temp>, it means it is connected as temporary so you should connect to the AP manually every time when you connect to the AP if it is not registered
User SettingsReset to default Left selection key (     Menu) >  Settings > User settings > Reset to default )To reset all preference settings and delete all personal data, such as contacts, message, WLAN and SIP information34
Left selection key (     Menu) >  Settings > Picture frame settings > Set picture frame > Enable )To change the slide time of the digital photo frame,  select Settings > Picture frame settings > Slide timeoutTo change the start time of the digital photo frame  after you put the phone on the cradle, select Settings > Picture frame settings > Start timeoutPicture Frame  SettingsDigital Photo FrameYou can use the SQ-3500 as a Digital Photo Frame when it’s on the cradle.To make a digital photo frame with the SQ-3500, copy images to the Micro SD card and insert Micro SD card into the SQ-3500.The function of the digital photo frame  supports  an image of up to 30pcs. The function of the digital photo frame supports  four different types of image – JPEG, GIF, BMP and PNGThe function of the digital photo frame supports  images up to 1MB.35
Time-zoneTo define your time zone, select Left selection key (       Menu) >  Settings > Time-zone)You  can select  country and city of the country. Time-zoneTo update the time, date, and time zone informationwith NTP server automatically, selectLeft selection key (       Menu) >  Settings > System > NTP server)36
Left selection key (     Menu) >  Settings > Information)You can see the setting information of Wi-Fi phones.Basic Info.My phone number, Firmware version, MAC addressWi-Fi Info.Displays the access point or wired/wireless router the Wi-Fi phone is connected to.SSID, Signal Strength, BSSID, Security, Channel, Beacon IntervalNetwork info.Displays the IP address, netmask, gateway and DNS address.Information37
Left selection key (     Menu) > Settings > System > SIP )You can set the information of the SIP server.System SettingsSIP Account.If you select SIP, the following options will appear:• Phone number – Enter your registered phone number from SIP server• User name – Enter your authorized user ID• Password – Enter your authorized password• Proxy – Enter the address of SIP serverSIP Settings.38
Language SettingsTo set the language used on the device display, Select Left selection key (      Menu) > Settings > System > Language System SettingsProvision SettingsTo download the new firmware via our Auto Provisioning Sever, Select Left selection key (      Menu) > Settings > System > Provision > Enable39All the function of the phone as shown above on the manual may be different according to the phone version.
SpecificationProduct SpecificationCertified Company UniData Communication Systems, INC.Device Name Wireless Data Communication system  wireless applianceModel SQ-3500Certification NumberManufacture UniData Communication Systems, INC.Manufacture Country Republic of KoreaFrequencyBand802.11b/g 2400MHz ~ 2483.5MHz802.11a 5150MHz ~ 5250MHz (A band)5725MHz ~ 5850MHz (D band)OperatingChannel 802.11b/g Ch1 ~ Ch 13802.11a A Band : Ch36, Ch40, Ch44, Ch48D Band : Ch149, Ch153, Ch157, Ch161, Ch165Transmission Output802.11b/g Under 10mW/MHz 802.11a A Band : Under 2.5mW/MHzD Band : Under 10m/WMHzDimensions 125(L) x 58(W) x 17(T)Weight  135gTemperature Range Operation: 32 to 122°F (0°C~50°C) Relative humidity 10%~90%Battery 3.7V/, 1450mAhThis equipment may occur crossed electronic wave and can not offer the service that regarding men’s safety40인증번호: UDC-SQ-3500-VA(B) FCC ID: SQMSQ-3500 6303A-SQ-3500
Specification41FCC ID: SQMSQ-3500This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference.(2) This device must accept any interference received, including interferencethat may cause undesired operation. Any changes or modifications (including the antennas) made to this devicethat are not expressly approved by the manufacturer may void the user's authority to operate the equipment.FCC RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolledenvironment. This device and its antenna must not be co-located or operating in conjunction with anyother antenna or transmitter. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of the following measures:---Reorient or relocate the receiving antenna.---Increase the separation between the equipment and receiver.---Connect the equipment into an outlet on a circuit different from that to which the receiver is connected---Consult the dealer or an experienced radio/TV technician for help.Frequency band of 5.15GHz to 5.25GHz is restricted to indoor used only to reduce any potential for harmful interference.

Navigation menu