Universal Electronics 8881-R Insignia cTV RF Remote 2010 User Manual DANA COMBINED NS 32E859A11
Universal Electronics Inc Insignia cTV RF Remote 2010 DANA COMBINED NS 32E859A11
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1353097 |
| Application ID | KfIkWEVLVZ5w48XFrnx5YQ== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 69.88kB (873556 bits) |
| Date Submitted | 2010-10-01 00:00:00 |
| Date Available | 2010-10-01 00:00:00 |
| Creation Date | 2010-09-24 14:25:46 |
| Producing Software | GPL Ghostscript 8.15 |
| Document Lastmod | 2010-09-27 11:49:49 |
| Document Title | user manual_DANA COMBINED NS-32E859A11.pdf |
| Document Creator | Adobe Acrobat 9.3.4 |
| Document Author: | User |
Getting Started NS-32E859A11/NS-42E859A11 Remote control # Button (power) 2 DVD Description Press to turn on your TV. Press again to put your TV in standby mode. When your TV is in standby mode, power still flows through it. To completely disconnect power, unplug the power cord. Press to control a DVD player. You must program the remote control before this button works. For more information, see “Programming your universal Insignia remote control” on page 27. 3 TV Press to put the remote in TV mode. 4 APPS Press to open the Apps screen in the on-screen menu. 5 TiVo Press to open the on-screen menu. 6 GUIDE Press to open the program guide. For more information, see “Displaying additional information” on page 35. 7 SELECT Press to confirm selections or changes. !"#$ Press to move left, right, up, or down in on-screen menus. ZOOM Press to select the aspect ratio. For more information, see “Adjusting the video settings” on page 40. 10 EXIT Press to close the on-screen menu. 11 Press to decrease the thumbs rating by 1 thumb. In the channel list, press to remove a highlighted channel from the favorite list. In the on-screen keyboard, press to switch to lowercase letters. (thumbs down) 12 VOL+/VOL– Press to increase or decrease the volume. 13 FAV Press to open the favorite channel list. For more information, see “Setting up the channel and favorite channel lists” on page 63 and “Viewing a favorite channel” on page 64. 14 MUTE 15 /SLOW 16 (replay) 17 (pause) 14 www.insigniaproducts.com Press to mute the sound. Press again to restore the sound. Press to enter slow motion playback in TV VOD mode (watching Netflix and CinemaNow) or when using a DVD player, Blu-ray player, or DVR. For more information, see “Programming your universal Insignia remote control” on page 27. Press to turn the video window on or off. For more information, see “Turning the video window on or off” on page 43. Press to jump back eight seconds in TV VOD mode (watching Netflix and CinemaNow) or when using a DVD player, Blu-ray player, or DVR. For more information, see “Programming your universal Insignia remote control” on page 27. Press to pause playback in TV VOD mode (watching Netflix and CinemaNow) or when using a DVD player, Blu-ray player, or DVR. For more information, see “Programming your universal Insignia remote control” on page 27. NS-32E859A11/NS-42E859A11 # Button 18 19 (fast-reverse) (stop) 20 $ (play) 21 CLEAR 22 AUDIO 23 PICT 24 STB 25 AUX 26 INPUT 27 LIVE Description # Button Description Press to fast-reverse in TV VOD mode (watching Netflix and CinemaNow) or when using a DVD player, Blu-ray player, or DVR. For more information, see “Programming your universal Insignia remote control” on page 27. Press to stop playback in TV VOD mode (watching Netflix and CinemaNow) or when using a DVD player, Blu-ray player, or DVR. For more information, see “Programming your universal Insignia remote control” on page 27. Press to start playback in TV VOD mode (watching Netflix and CinemaNow) or when using a DVD player, Blu-ray player, or DVR. For more information, see “Programming your universal Insignia remote control” on page 27. 32 CH!/CH" Press to change channels. For more information, see “Selecting a channel” on page 34. Press to see the list of all the recorded programs in a DVR/STB that is set up with your remote control. You need to program the remote control to control connected devices. For more information, see “Programming your universal Insignia remote control” on page 27. Press to select Audyssey Dynamic Volume, SRS TruSurround HD, Audio Only, Treble, Bass, or Balance. For more information, see “Manually adjusting audio settings” on page 44. Press to adjust the video settings. For more information, see “Adjusting the video settings” on page 40. Press to control a set-top box. You must program the remote control before this button works. For more information, see “Programming your universal Insignia remote control” on page 27. Press to control auxiliary devices, such as amplifiers or receivers. You must program the remote control before this button works. You need to program the remote control to control connected devices. For more information, see “Programming your universal Insignia remote control” on page 27. Press to open the input source list, then press ! or " to cycle through the available input sources. For more information, see “Selecting the video input source” on page 33. In menu mode, press to return to full-screen video TV mode. 28 INFO 29 MENU Press to open the on-screen menu. 31 VOD (thumbs up) 33 LIST/DVR 34 LAST Press to go to the last viewed channel in TV mode. 35 (advance) 36 (fast-forward) Press to clear character input in the on-screen keyboard. Press to display TV status information, such as the channel number, channel name (if available), or signal source. For more information, see “Displaying additional information” on page 35. In the channel list, press to rename the highlighted channel. For more information, see “Setting up the channel and favorite channel lists” on page 63. 30 Getting Started 37 (record) 38 A B C D 39 Numbers 40 SLEEP/— Press to jump forward to the next segment in TV VOD mode (watching Netflix and CinemaNow) or when using a DVD player, Blu-ray player, or DVR. For more information, see “Programming your universal Insignia remote control” on page 27. Press to fast-forward in TV VOD mode (watching Netflix and CinemaNow) or when using a DVD player, Blu-ray player, or DVR. For more information, see “Programming your universal Insignia remote control” on page 27. In DVR mode, press to record a program. You need to program the remote control to record from the DVR. For more information, see “Programming your universal Insignia remote control” on page 27. Provides an enhanced interface for attached device (such as a DVR), Internet applications, and TiVi search features. Press to enter channel numbers, the parental control password, or characters. When programming the remote control, press to enter device and programming codes. Press to enter a digital sub-channel number in Live TV mode. In other modes, press to set the sleep timer. You can select Cancel, 5, 10, 15, 30, 60, 90 minutes and 2, 3, 4 hours. For more information, see “Setting the sleep timer” on page 76. 41 ENTER Press to confirm selections or changes. 42 CC Press to turn closed captioning on or off. For more information, see “Using closed captioning” on page 71. Press to increase the thumbs rating by 1 thumb. In the channel list, press to add a highlighted channel to the favorite list. In the on-screen keyboard, press to switch to uppercase letters. Press to access the VOD (video on demand) on-screen menu to watch video services offered through your connected TV, such as Netflix, CinemaNow, etc. 15 www.insigniaproducts.com Getting Started NS-32E859A11/NS-42E859A11 Using the remote control Making connections Installing the remote control batteries Connecting the power To install the remote control batteries: 1 While pressing the release button on the battery compartment cover on the back of the remote, lift the cover off the remote. To connect the power: • Plug the power cord on back of your TV into a power outlet. Cautions • • 2 Insert two AA batteries into the battery compartment. Make sure that you match the + and – symbols on the batteries with the + and – symbols in the battery compartment. 3 Replace the battery cover. Cautions • • • Batteries should not be exposed to excessive heat, such as sunshine, heat registers, or fire. Battery chemicals can cause a rash. If the batteries leak, clean the battery compartment with a cloth. If chemicals touch your skin, wash immediately. Make sure that batteries are disposed of correctly. Do not burn or incinerate. 16 www.insigniaproducts.com Make sure that you use the correct type of power. See the label on your TV. If you do not intend to use your TV for an extended period of time, unplug the power cord from the power outlet. NS-32E859A11/NS-42E859A11 Turning on your TV for the first time Per Dana’s instructions, the graphics and text in this section were based on comments for the QSG. Please verify if additional changes need to be made. Note Getting Started 3 Press ! or " to highlight Set up this TV, then press SELECT. The Remote Control Connection screen opens. Welcome for retail mode You are about to begin Guided Setup, which prepares the Insignia HD TV for your use. This typically takes less than 10 minutes. (If you skip Guided Setup now, you can set it up later by pressing TIVO and choosing Settings > Help > Reset this TV > Repeat Guided Setup.) Unless otherwise noted, all tasks in this section are based on using the remote control. The first time you turn on your TV, the Setup Wizard opens. The Setup Wizard guides you through setting up basic settings. You can skip these settings or press EXIT, MENU, or LIVE on your remote control to exit the wizard (except when a software update is in progress). To set up your TV: 1 Make sure that you have: • Installed the remote control batteries. (See page 16 for details). • Connected an antenna, cable TV, or satellite TV. (See page 17 for details.) • Connected to your home network, if available. (See page 24 for details). • Connected the power cord. (See page 16 for details.) 2 Press (power) to turn on your TV. The Welcome screen opens. Set up this TV Skip for now 4 Press and on your remote control to pair the remote control. Remote Control Connection To set up your remote control to use RF (radio frequency) to communicate with your TV, hold down the THUMBS UP and THUMBS DOWN buttons at the same time for 5 seconds. This will mean you won’t need to point the remote control directly at the TV. Hold down the THUMBS UP and THUMBS DOWN buttons for 5 seconds Cancel (use IR instead) 25 www.insigniaproducts.com Getting Started NS-32E859A11/NS-42E859A11 5 The Network Setup screen opens. Press ! or " to highlight your network connection type, then press SELECT and follow the on-screen instructions to set up your network and run the network speed test. 7 If you connected to a network in Step 5 and a software update is available, the Update in Progress screen opens. Follow the on-screen instructions to install the software update. Network Setup Update In Progress You are about to set up this TV to use your home network. Preparing Connecting Getting info Disconnecting Loading info If you have a wired network, please plug an Ethernet cable into the TV. If you have a wireless network, DO NOT plug an Ethernet cable into the TV. (Done) (Done) (Done) (Done) (38% complete) Set up wireless network Use wired Ethernet instead Skip this step, I don’t have a network Please wait... 6 The Setup Channels screen opens. Press ! or " to highlight your signal type, then press ! or " to start the channel scan. If you use a cable or satellite TV box, you do not need to scan for channels. Set Up Channels 8 The Date and Time Setup screen opens. Press ! or " to highlight Use this date and time, then press SELECT. OR Press ! or " to highlight Set date and time manually, then press ! or " and follow the on-screen instructions to set your time zone, daylight saving option, and date and time. The Congratulations screen opens. Your TV works with either cable or antenna channels. Select the TV signal you have connected to this TV. The TV will then begin scanning for channels, which may take up to 30 minutes. Note: If you have cable, only scan for channels if you do NOT use a cable box. If you have a cable box (or satellite box), that box already has information about your channels, and you can skip this step. Date and Time Setup If the date and time are not correct, you may manually set them. Antenna Cable Skip this step, don’t scan for channels The current date and time are: 12/12/2010 at 10:00 PM Eastern Standard Time Use this date and time Set date and time manually 26 www.insigniaproducts.com NS-32E859A11/NS-42E859A11 9 The Congratulations screen opens. Press TiVo to enjoy your new TV. Getting Started Programming your universal Insignia remote control Note Congratulations! To use the on-screen setup for your remote control, the remote control must be in RF mode. For more information, see “Setting up your Z-Wave remote control” on page 102. You TV is now set up. Press TIVO at any time to access the TV’s menu and On Demand shows. Press LIVE at any time to watch television. Programming the mode buttons In R3 comments, Dana said to add “DVR” in the following paragraph. Vendor says to remove it. Please advise. You can program the mode buttons on your TV remote control (DVD, STB, DVR, or AUX) to control the corresponding device using your TV remote control. Enjoy your new TV! Press TIVO to continue 10 If you skipped the channel scan in Step 6 because you are using a cable or satellite TV box, select the video input source for your TV. See “Selecting the video input source” on page 33. To program the mode buttons: 1 Press TiVo. The Home screen opens. Press ! or " to select Settings, then press $ or SELECT. 2 Press ! or " to highlight Settings, then press $ or SELECT. Home 10:00pm Settings Connect to the Internet Settings Parental Controls Check for updates Account & system info Help Sleep timer 27 www.insigniaproducts.com Getting Started NS-32E859A11/NS-42E859A11 3 Press ! or " to highlight Devices, then press $ or SELECT. control that you want to program (DVD, STB, DVR, or AUX), then press $ or SELECT. In R3 comments, Dana said to add DVR. Vendor says to delet it. Please advise. Settings Appearance Audio Channels & providers Devices Network Recommendations Video 5 Press ! or " to highlight the mode button on your remote INlink HDMI control Input sensor Remote control setup TV power On Reset device settings 10:00 PM Remote Control Setup DVD button 10:00 PM STB button AUX button Set up the DVD button on your remote to control your device. Power button Volume button Backlight Reset all remote settings 4 Press ! or " to highlight Remote control setup, then press or SELECT. 6 Press ! or " to highlight the device you want to control with the button you are programming, then press $ or SELECT and follow the on-screen instructions. Settings Appearance Audio Channels & providers Devices Network Recommendations Video INlink HDMI control Input sensor Remote control setup TV power on Reset device settings 10:00 PM Set up the remote control to control the devices that you use with this TV, like your cable box, DVR, or DVD player. Step 1: Select Device Remote Control Setup (DVD button) Select the device you would like to control when you press the DVD button on the remote controls. DVD VCR 28 www.insigniaproducts.com 10:00pm NS-32E859A11/NS-42E859A11 7 Repeatedly press $ to highlight the list of brands, press ! or to highlight the brand of your device, then press SELECT. Vendor said to move the following note to follow step 8. But this note applies to brands as well as models. So it seems that is should stay with the step it first applies to. Please advise. 10 Press ! or " to highlight Yes, continue, then press SELECT. The following screen opens. Step 4: Test Setup Remote Control Setup (DVD button) Did the device turn OFF ? Note To confirm that the remote fully controls the DVD (or other device), turn ON the device and then try the following buttons on the remote control: You can narrow down the brand or model number list by entering the first one or two letters or numbers of your device brand and model number using the on-screen keyboard. Getting Started 10:00pm 1. Play 2. Stop 8 Repeatedly press $ to highlight the list of models, press ! or to highlight the model number of your device, then press SELECT. 9 Follow the on-screen instruction to test the remote control on the device. Does the remote reliably control the device? Yes, continue No 11 Press ! or " to highlight the input jack you want to assign to Step 4: Test Setup Remote Control Setup (DVD button) Now we will test to see if the remote can control your DVD (or other device). 1. Turn ON the DVD (or other device). 2. Point the remote at the DVD (or other device). 3. The remote will try to turn the device OFF. 10:00pm this button, then press SELECT. When you press the mode button, your TV switches to the input source you selected for the device. If you do not want to switch to the input source you selected for the device when you press the mode button, select I don’t want to automatically switch inputs, then press SELECT. Start test 29 www.insigniaproducts.com Getting Started NS-32E859A11/NS-42E859A11 We changed the following graphic based on Dana’s comments. Vendor wants move HDMI1 up to the first item in the list and highlight it. Then move Component to just above VGA. Please advise if additional changes need to be made. Step 5: Select Input You can use the button lock to assign the power and volume controls to the device you select, regardless of the operating mode. For example, if you lock the volume to your DVD player, then go to TV mode and press a volume button on your remote, the volume will change on the DVD player instead of on your TV. Note Remote Control Setup (DVD button) If the DVD (or other device) is connected to one of the inputs of this TV, the TV will automatically change to that input when you press the DVD button on the remote control. Programming the button lock Before you program the button lock, you need to program the mode buttons. For more information, see “Programming the mode buttons” on page 27. 10:00pm To program the button lock: 1 Press TiVo. The Home screen opens. Press ! or " to select Settings, then press $ or SELECT. 2 Press ! or " to highlight Settings, then press $ or SELECT. Component [Component] HDMI 1 [HDMI 1] HDMI 2 [HDMI 2] HDMI 3 [HDMI 3] HDMI 4 [HDMI 4] VGA [VGA] I don’t want to automatically switch inputs 12 Press SELECT to select OK and exit the remote control setup. Home 10:00pm Settings Connect to the Internet Setup Complete! Remote Control Setup (DVD button) The DVD button on your remote is now successfully set up to control the DVD (or other device) connected to HDMI 1 [HDMI 1] on this TV. 10:00 PM OK 30 www.insigniaproducts.com Settings Parental Controls Check for updates Account & system info Help Sleep timer NS-32E859A11/NS-42E859A11 3 Press ! or " to highlight Devices, then press $ or SELECT. Getting Started 5 Press ! or " to highlight the button on your remote control that you want to lock (power or volume), then press $ or SELECT. Settings Appearance Audio Channels & providers Devices Network Recommendations Video INlink HDMI control Input sensor Remote control setup TV power On Reset device settings Remote control setup 10:00 PM DVD button 10:00 PM STB button AUX button Set up the power button on the remote to control your devices. Power button Volume button Backlight Reset all remote settings Current Settings: AUX, DVD 4 Press ! or " to highlight Remote control setup, then press or SELECT. 6 Press ! or " to highlight the device you want the locked button to control, then press $ or SELECT to return to the Remote Control Setup menu or previous screen. Settings Note Appearance Audio Channels & providers Devices Network Recommendations Video INlink HDMI control Input sensor Remote control setup TV power on Reset device settings You can assign more than one device for the power button to control (TV is the default selected). Highlight Use these settings, then press SELECT after adding the devices. 10:00 PM Set up the remote control to control the devices that you use with this TV, like your cable box, DVR, or DVD player. Setup Power Button Remote Control Setup Choose all of the devices you want to turn on and off when you press the power button on the remote control while it is in TV mode. 10:00pm Use these settings AUX DVD Set-top box 31 www.insigniaproducts.com Getting Started NS-32E859A11/NS-42E859A11 Resetting all the remote settings 4 Press ! or " to highlight Remote control setup, then press You can reset the remote control to the factory defaults. This will clear all the programming and button lock settings. To reset all the remote settings: 1 Press TiVo. The Home screen opens. Press ! or " to select Settings, then press $ or SELECT. 2 Press ! or " to highlight Settings, then press $ or SELECT. Home 10:00pm Settings Connect to the Internet Settings Parental Controls Check for updates Account & system info Help Sleep timer $ or SELECT. Settings Appearance Audio Channels & providers Devices Network Recommendations Video INlink HDMI control Input sensor Remote control setup TV power on Reset device settings 10:00 PM Set up the remote control to control the devices that you use with this TV, like your cable box, DVR, or DVD player. 5 Press ! or " to highlight Reset all remote settings, then press $ or SELECT. Remote Control Setup 3 Press ! or " to highlight Devices, then press $ or SELECT. 10:00 PM DVD button STB button Settings AUX button Resets the entire remote settings to factory defaults. Power button Appearance Audio Channels & providers Devices Network Recommendations Video INlink HDMI control Input sensor Remote control setup TV power On Reset device settings 10:00 PM Volume button Backlight Reset all remote settings 6 Press ! or " to highlight Yes, reset all remote settings, then press SELECT. Vendor said to add step 7, but it is the same as step 6. Is this correct? 7 Press ! or " to highlight Yes, reset all remote settings, then press SELECT. 32 www.insigniaproducts.com NS-32E859A11/NS-42E859A11 Understanding the basics Turning your TV on or off To turn your TV on and off: 1 Make sure that the power cord is already connected to a power outlet. 2 Press (power) to turn on your TV. The power indicator LED turns blue. 3 Press (power) again to turn off your TV. Your TV enters Standby mode and the power indicator turns red or purple, depending on the TV power on mode you select. For more information, see “Setting the TV power on mode” on page 89. Getting Started 2 Press ! or " to highlight a video input source, then press SELECT. You can select: • TV • HDMI 1 • HDMI 2 • HDMI 3 • HDMI 4 • Component/Composite (to select a component or composite device) • VGA Navigating menus and using the on-screen keyboard Navigating the menus Warning When your TV is off, power still flows into it. To disconnect power, unplug the power cord. Press to open the menu. Press $ to move the cursor on the screen, adjust a selected item, or enter a setting. Press # to move the cursor on the screen, adjust a selected item, or return to the previous screen. Note If your TV does not detect a signal and you do not press any buttons for several minutes, your TV goes into Standby mode automatically. Selecting the video input source To select the video input source: 1 Turn on your TV, then press INPUT on the remote control. The input source list opens. Did you know? Press to select menu items. TV Insignia has a variety of high-quality speaker systems for your new TV. HDMI 1 HDMI 2 Press to confirm your selections or enter a sub-menu. HDMI 3 HDMI 4 Component/ Composite VGA Press to return to the previous screen. Press to close the menu. 33 www.insigniaproducts.com Getting Started NS-32E859A11/NS-42E859A11 Using the on-screen keyboard The keyboard screen lets you create custom labels (names) for input sources or channels. Name HDMI 4 To use the remote control shortcuts: • Press on your remote control to add one space to the right of the cursor in the text entry area. • Press on your remote control to delete one character to the left of the cursor in the text entry area. • Press Enter a name for the input and then press RIGHT to choose Done entering name. 10:00 PM HD TV__ Done entering name Cancel on your remote control to switch to ABC mode. • Press on your remote control to switch to abc mode. • Press number buttons on your remote control to enter numbers in the text entry area. Selecting a channel Shortcuts: Space Delete Uppercase Lowercase Enter numbers To use the on-screen keyboard: • Press !"# or $ to highlight a character, then press SELECT to enter the character in the text entry area. • Highlight CLR, then press SELECT to clear the text entry area. • Highlight DEL, then press SELECT to delete one character to the left of the cursor in the text entry area. • Highlight SPC, then press SELECT to add one space to the right of the cursor in the text entry area. • Highlight ABC, then press SELECT to change all keyboard characters to uppercase. The ABC key changes to abc. • Highlight abc, then press SELECT to change all keyboard characters to lowercase.The abc key changes to ABC. • Highlight SYM, then press SELECT to replace the characters with symbols. The SYM key changes to ABC or abc, depending on the character mode you were in before you entered symbol mode. To select a channel: • Press CH! or CH" to go to the next higher or lower channel in the channel list. • Press the number buttons to enter the channel number you want, then wait for the channel to change or press SELECT to immediately change the channel. • To select a digital sub-channel, press the number buttons to select the main digital channel, press — (dash), then press the number button for the sub-channel. Wait for the channel to change, or press SELECT to immediately change the channel. For example, to tune to channel 5-1, press 5, — (dash), then 1. • Press LAST to go to the last viewed channel. • Press FAV to open the favorite channel list, press ! or " to highlight a channel, then press SELECT. 34 www.insigniaproducts.com Note If a list has more than one page, press ! or " to scroll through the pages. NS-32E859A11/NS-42E859A11 Getting Started Adjusting the volume To adjust the volume: • Press VOL+ or VOL– to increase or decrease the volume. • Press MUTE to turn off the sound. Press MUTE again to turn the sound back on. Displaying additional information To view channel information: • Press INFO to view an information banner. The information banner shows the current program information such as channel number, video input source, and resolution. • Digital channel information—Displays the channel number, station name, channel label, broadcast program name, TV rating, signal type, audio information, resolution, CC mode, current time, and current program start and end times. • Analog channel information—Displays channel number, channel label (if available), signal type, audio information, and resolution. • Press GUIDE to show the digital program guide, which may list available programs, program times, and program summaries, depending on the information provided by the broadcaster. 35 www.insigniaproducts.com Appendix NS-32E859A11/NS-42E859A11 Setting up your Z-Wave remote control 2 Press and hold and on the remote control for about five seconds. The Remote Control Setup Complete screen opens and the remote control LED blinks four times. Per Dana, no additional changes should be made to the Z-Wave remote control section. The remote control that came with your TV is different from a traditional IR remote control. Using Z-Wave technology, your remote control allows RF communication with your TV. You do not have to point the remote control toward the remote control sensor on the front of your TV. Set up a New Remote Control Hold down the and buttons at the same time for 5 seconds to set up your new remote control to work with this TV. Press any button on the TV to cancel. Adding your remote control to the TV Z-Wave network To turn on the RF communication between your TV and the remote control, you have to add the remote control to the Z-Wave network first. 3 Press SELECT to complete the setup. You can now use the RF communication between the remote control and your TV. Note The remote control’s basic command is set to Simple AV Control command class. It is used to control an AV device in a Z-Wave network which is used for IR remote replacement. To add your remote control to your TV Z-Wave network (TV as Primary Controllor): 1 Press and hold VOL and VOL on the front of your TV at the same time. The Set up a New Remote Control screen opens. Remote Control Setup Complete The TV now recognizes your new remote control. OK Note To add other Z-Wave devices to your TV Z-Wave network, perform Step 1 above, then follow the instructions in the user manual of that device to complete the setup. 102 www.insigniaproducts.com NS-32E859A11/NS-42E859A11 Toggling between IR and RF communication Once your remote control is added to the TV ZWave network, you can use Z-Wave RF communication to control your TV. However, you can also switch to IR communication, which requires you to point the remote control toward the remote control sensor when you try to control your TV. RF communication with your TV does not require you to point the remote control toward the remote control sensor on the front of your TV. Also your remote control and TV can talk to each other which will help with setting up your Insignia Universal remote to work with other home theater devices. 2 Press and hold and on the remote control for about five seconds. The Z-Wave Device Removed screen opens. 3 Press SELECT to complete the removal. The remote control is removed from the TV Z-Wave network, and RF communication is not available. Note • • To toggle between IR and RF communication: • If you are using RF communication, press and hold and EXIT at the same time. The remote control switches to IR mode and the LED blinks four times. • If you are using IR communication, press and hold and EXIT at the same time. The remote control switches to RF mode and the LED blinks twice. Removing your remote control from the TV Z-Wave network To remove your remote control from the TV Z-Wave network (TV as Primary Controllor): 1 Press and hold VOL and VOL on the front of your TV at the same time. The Remove a Z-WAVE Device screen opens. Appendix To enable RF communication, you have to add the remote control to the Z-Wave network again. To remove other Z-Wave devices from your TV ZWave network, perform Step 1 above, then follow the instructions in the user manual of that device to complete the removal. Resetting your TV Z-Wave network To reset your TV Z-Wave network: 1 Press and hold VOL , VOL , and CH on the front of your TV at the same time. The Reset Z-Wave Network? screen opens. Reset Z-Wave Network? Warning: this will reset your Z-Wave network, and any devices you wish to use will need to be added again. Reset Z-Wave Network Cancel Remove a Z-WAVE Device? Go to your Z-Wave device and follow the instructions to remove it from your Z-Wave network. 2 Press ! or " to highlight Reset Z-Wave Network, then press SELECT. Press any button on the TV to cancel. 103 www.insigniaproducts.com Appendix NS-32E859A11/NS-42E859A11 3 Press SELECT to complete the reset. Z-Wave Network Reset Your Z-Wave network has been successfully reset. Any devices you wish to use on the Z-Wave network must be added again. OK To add your TV to other Z-Wave network: • Refer to the user manual of the Z-Wave device (Primary Controller) for programming information. • When the Z-Wave device is in programming (setup) mode, press CH and CH on the TV at the same time to add your TV to the Z-Wave network. To remove your TV from other Z-Wave network: • Refer to the user manual of the Z-Wave device (Primary Controller) for programming information. • When the Z-Wave device is in programming (setup) mode, press CH and CH on the TV at the same time to remove your TV the Z-Wave network. Z-Wave Terminology Note After resetting your TV Z-Wave network, to use your remote control, you have to switch to IR communication or add the remote control to the TV Z-Wave network again to enable RF communication. For more information, see “Toggling between IR and RF communication” on page 103 or “Adding your remote control to the TV Z-Wave network” on page 102. Managing other Z-Wave network (other Z-Wave device as Primary Controller) Your TV can be operated in another Z-Wave network with Z-Wave certified devices from other manufacturers or other applications. The different listening nodes within the network can act as repeaters regardless of vendor. Note To setup your Z-Wave network with other devices, refer to the user manual of the devices for more information. 104 Primary Controller—This is the main device used to set up and control your Z-Wave network. There can only be one primary controller, and it must be used to add or delete devices. A primary controller can be a portable device like a hand-held remote control, a static controller (permanently installed and never moved), a Z-Wave enabled PC, or a Z-Wave enabled Ethernet router/bridge. Secondary Controller—The Z-Wave network supports multiple controllers so you can use additional Z-Wave remotes throughout the home. If the secondary controller is the same brand and model as the primary, it will have all of the same capabilities as the primary with one exception; the secondary controller can not be used to add or delete devices. Home Control Network—Your controllers and every Z-Wave device you have added with the primary controller are linked together into a wireless network. Each device in your network has a unique address assigned to it and cannot be activated by your neighbor’s Z-Wave controller. Node/Device—Node is the technical term used to describe a Z-Wave device in your home control network. The terms “Node” and “Device” both refer to an individual Z-Wave enabled device and are interchangeable within context of instructions. Notes on Z-Wave network management • Adding a node or device can also be referred to as including a node or device. Removing a node or device can also be referred to as excluding or deleting a node or device. www.insigniaproducts.com NS-32E859A11/NS-42E859A11 • Every Z-Wave enabled device acts as a signal repeater and multiple devices result in more possible transmission routes which helps eliminate “RF dead-spots.” Appendix 2 Enter 9 7 5. The LED blinks twice. Notes • Advanced remote control programming • If more than 10 seconds pass between button presses, the remote control exits programming. If the LED displays one long flash instead, replace the batteries. If the remote control continues to display one long flash, the remote control cannot learn a new button. 3 Press the mode button you want to learn functions on, then Note To use the on-screen setup for your remote control, the remote control must be in RF mode. For more information, see “Setting up your Z-Wave remote control” on page 102. Programming a learned button Your remote control includes a learning feature that lets you add functions that are unique to your home entertainment devices (such as VCR tracking up or down). However, there are some considerations to keep in mind: • Your original remote controls must be in working order for learning to work correctly. • Learned buttons are mode-specific, so each button can store a unique function for each mode. • Do not use the mode buttons or TiVo button. • Certain device functions are not learnable, including multi-frequency types, some high-frequency functions, and other unusual formats. • When setting up learned buttons, avoid high levels of ambient light such as natural sunlight or energy efficient fluorescent lights. press the button on the Insignia remote you want to program. 4 Place your Insignia remote control head-to-head (about 2" apart) from your original remote control (the one that came with the device). 5 On the original remote, press and hold the button to be learned. Continue holding the button on the original remote until the Insignia’s LED blinks twice. 6 Repeat Step 3 through 5 to program another button. After you have completed programming all the buttons you want, press and hold SELECT until the LED blinks twice to save all data learned. Deleting a single learned button This process returns the button to its original programming for the mode you select. You can also delete learned programming by teaching a different function to the button (see “Programming a learned button” on page 105). Notes • Note • Have your original remote controls handy before programming learning. To program a learned button: 1 Press and hold the A and D buttons at the same time until the LED blinks twice, then release. If more than 10 seconds pass between button presses, the remote control exits programming. If the LED displays one long flash instead, replace the batteries. If the remote control continues to display one long flash, the remote control cannot learn a new button. To delete a single learned button: 1 Press and hold the A and D buttons at the same time until the LED blinks twice, then release. 2 Enter 9 7 6. The LED blinks twice. 105 www.insigniaproducts.com Appendix NS-32E859A11/NS-42E859A11 3 Press the mode button that you want to remove the learned button from, then press the button containing the learned function to be deleted, twice. The LED blinks twice and programming ends. Deleting all learned buttons in a specific mode Notes • • If more than 10 seconds pass between button presses, the remote control exits programming. If the LED displays one long flash instead, replace the batteries. If the remote control continues to display one long flash, the remote control cannot learn a new button. To delete all learned buttons in a specific mode: 1 Press and hold the A and D buttons at the same time until the LED blinks twice, then release. 2 Enter 9 7 6. The LED blinks twice. In a previous review, Dana said to add “DVR” in the following step. Vendor wants to delete it. Please advise. 3 Press the mode button twice (for example, DVD, STB, DVR, or AUX) to clear all the learned buttons for that mode. The LED blinks twice and programming ends. Programming macros Your can program any button (except the TiVo button) on your remote control with a macro function. Each button can be set up to perform a pre-programmed set of sequential button presses with the press of a single button. You can use a macro to control a home theater operation, to set a favorite channel, or for other functions you want to control with one button press. Each macro button can hold up to 32 button presses. You can program two types of macros: • Mode-independent—Works in any mode. • Mode-dependent—Works in a specific mode. Note Programming a new macro over an existing one erases the original macro. To program a mode-independent macro: 1 Press and hold the A and D buttons at the same time until the LED blinks twice, then release. 2 Enter 9 9 5. The LED blinks twice. 3 Press the button you want to assign to a macro. 4 Enter the series of commands you want the macro to execute (up to 32 commands). 5 Press and hold SELECT until the red LED blinks twice, then release. When you press the preset macro button, the remote sends the series of commands you have entered, regardless of what mode you are in. For example, you could program a macro button to turn on both your TV and cable box and select a particular channel. Note To clear the macro, repeat Steps 1 through 5, but do not enter a series of commands at Step 4. To program a mode-dependent macro: 1 Press the device mode button (DVD, STB, DVR, or AUX). 2 Press and hold the A and D buttons at the same time until the LED blinks twice, then release. 3 Enter 9 7 8. The LED blinks twice. 4 Press the button you want to assign to a macro. 5 Enter the series of commands you want the macro to execute (up to 32 commands). 6 Press and hold SELECT until the red LED blinks twice, then release. When you press the macro button, the remote sends the series of commands you have entered, but only if you are in the mode you selected in Step 1. For example, you could program the macro button to turn on both your TV and cable box and select a particular channel, but only if you are in TV mode. If you are in DVD mode, this button does not execute the macro you set up in TV mode. Note To clear the macro, repeat Steps 1 through 6, but do not enter a series of commands at Step 4. 106 www.insigniaproducts.com NS-32E859A11/NS-42E859A11 Controlling the remote control backlight Appendix 3 Press ! or " to highlight Devices, then press $ or SELECT. Settings Your remote control has a backlight that can turn on when you press a button. You can set the amount of time your want the backlight to stay on before it automatically turns off. Turning the remote control backlight on or off To turn your remote control backlight on or off: 1 Press and hold the A and D buttons at the same time until the power LED blinks twice, then release. 2 Enter 9 7 2. If you are turning on the remote control backlight, the power LED blinks twice. If you are turning off the remote control backlight, the power LED blinks four times. Appearance Audio Channels & providers Devices Network Recommendations Video 10:00 PM 4 Press ! or " to highlight Remote control setup, then press $ or SELECT. Setting the remote control backlight delay To set the remote control backlight delay: 1 Press TiVo. The Home screen opens. Press ! or " to select Settings, then press $ or SELECT. 2 Press ! or " to highlight Settings, then press $ or SELECT. INlink HDMI control Input sensor Remote control setup TV power On Reset device settings Settings Appearance Audio Channels & providers Devices Network Recommendations Video INlink HDMI control Input sensor Remote control setup TV power on Reset device settings 10:00 PM Set up the remote control to control the devices that you use with this TV, like your cable box, DVR, or DVD player. Home 10:00pm Settings Connect to the Internet Settings Parental Controls Check for updates Account & system info Help Sleep timer 107 www.insigniaproducts.com Appendix NS-32E859A11/NS-42E859A11 5 Press ! or " to highlight Backlight, then press $ or SELECT. Dana said not to change the following graphic. Remote control setup DVD button 10:00 PM STB button AUX button Power button Volume button Channel buttons Set the delay before the backlight on the remote control automatically turns off. Current Settings: 3 seconds Backlight Reset all remote settings 6 Press ! or " to highlight the amount of time you want the backlight to stay on, then press $ or SELECT. Setup Backlight Remote Control Setup Set the dealy before the backlight on the remote control automatically turns off. 10:00 PM 1 seconds 2 seconds 3 seconds 4 seconds 5 seconds 6 seconds 7 seconds 8 seconds 9 seconds 10 seconds 108 www.insigniaproducts.com Legal Notices Legal notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 Two-year limited warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113 109 Legal Notices NS-32E859A11/NS-42E859A11 Legal notices HDMI HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. FCC Part 15 This device complies with Part 15 of the FCC Rules. Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply within the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FCC ID Number Remote: MG38881-R FCC ID Number TV: (working on getting this) Model Number: NS-32E859A11 & NS-42E859A11 FCC warning Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules could void the user’s authority to operate this equipment. DHHS and FDA safety certification • This product is made and tested to meet safety standards of the FCC, requirements and compliance with safety performance of the U.S. Department of Health and Human Services, and also with FDA Radiation Performance Standards 21 CFR Subchapter J. RSS 310 statement To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication. Per Dana, need to add the open source information. She is currently working with the Legal department to implement. Audyssey Audyssey Dynamic Volume™ Energy Star DYNAMIC VOLUME To meet Energy Star requirements, keep TV settings at the factory default settings. SRS TruSurround HD is a trademark of SRS Labs, Inc. TruSurround HD technology is incorporated under license from SRS Labs, Inc. SRS TruSurround HD™ creates an immersive, feature-rich surround sound experience from two speakers, complete with rich bass, high frequency detail and clear dialog. Disclaimer This Insignia product may contain content and/or services that belong to a third party. Such third party content and/or service may only be used in compliance with the terms and conditions that govern such use. Unless expressly authorized by the applicable third party's terms of use, you may not modify, copy, republish, upload, post, transmit, translate, sell, create derivative works, exploit, or distribute in any manner or medium any third party content or service displayed through the Insignia product. All third party content or service is provided "as is." Third party content or service may be terminated or interrupted at any time. Insignia has no control over the networks and transmission facilities that third party content and services are transmitted through. Any question or request regarding third party content or services should be made directly to the applicable third party. INSIGNIA EXPRESSLY DISCLAIMS ANY RESPONSIBILITY OR LIABILITY FOR ANY AVAILABILITY, INTERRUPTION OR SUSPENSION OF ANY THIRD PARTY CONTENT OR SERVICE MADE AVAILABLE THROUGH THE INSIGNIA PRODUCT. INSIGNIA DOES NOT WARRANT OR MAKE ANY REPRESENTATION, WHETHER EXPRESS OR IMPLIED, ABOUT THE SUBSTANCE, QUALITY, FUNCTIONALITY, ACCURACY, VALIDITY, TIMELINESS, SUITABILITY, AVAILABILITY, COMPLETENESS, FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY OR ANY OTHER REPRESENTATION ABOUT SUCH CONTENT OR SERVICES. INSIGNIA EXPRESSLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. UNDER NO CIRCUMSTANCES, INCLUDING NEGLIGENCE, SHALL INSIGNIA BE LIABLE, WHETHER IN CONTRACT OR TORT, FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, ATTORNEY FEES, COSTS, EXPENSES, OR ANY OTHER DAMAGES ARISING OUT OF OR IN CONNECTION WITH THE USE OF ANY THIRD PARTY CONTENT OR SERVICES, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. End User License agreement Please proivde the text of this agreement PUBLIC LICENSE 110 This product contains software that is subject to the GNU Public License Version 2 (GPL2). You can obtain a copy of the GPL License from http://www.gnu.org/licenses/old-licenses/gpl-2.0.html. www.insigniaproducts.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Author : User Create Date : 2010:09:24 14:25:46Z Modify Date : 2010:09:27 11:49:49-07:00 XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Format : application/pdf Creator : User Title : user manual_DANA COMBINED NS-32E859A11.pdf Creator Tool : Adobe Acrobat 9.3.4 Metadata Date : 2010:09:27 11:49:49-07:00 Producer : GPL Ghostscript 8.15 Document ID : uuid:986dc77e-2a2c-4ad3-8e7c-f42c871d39b8 Instance ID : uuid:32d4448a-9bfe-42cc-9d74-3a08cce7a118 Page Count : 23EXIF Metadata provided by EXIF.tools